2ARDB-TRF0FBMotorized Treadmill

KingSmith Smart Foldable Treadmill User Manual Before using this product, please read this User Manual carefully, and keep it well. Model No. :TRF0FB Manufacturer/Importer: Beijing Kingsmith Technology Co., Ltd. AddressFloor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China. MADE IN CHINA Content 01 Products and Accessories 02 Structural Plan 03 Novice Guide 04 Learn How to Use the Treadmill 05 Warm-up Exercises 06 Safety Instructions 07 Maintenance 08 Declaration on the Harmful Substances 09 Trademark and Legal Declaration 10 Exploded Drawing 11 Part List 02 03 07 09 13 14 17 18 19 20 23 User Manual WARNING 1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. 2. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. WARNING: keep young children away from this machine at all times. Contact with the moving surface may result in severe friction burns Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and ( 2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre l’antenne et votre corps. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. Thank you for selecting the 2 IN 1 TREADMILL, hereinafter referred to as the Treadmill. It has the ingenious, simple and innovative overall design, so that you can enjoy the quality life of healthy sports at home. Please check carefully whether or not the treadmill is complete and intact. If there are any losses or damage, Please contact the seller. Specific Parameters Working Dimension Folded Dimension Walking Area Net weight User Capacity Applicable Age Applicable Height Minimum Speed Maximum Speed Rated Power Frequency Voltage Sport mode Main Product Accessories Detailed parameters 1480×792×1060 mm 1530×792×139 mm 1210×480 mm 34 kg 100 kg 14 ~ 60 years old Unlimited 0.8 km/h 12 km/h 746 W 50/60 Hz 220-240 V ~ (EU) / 110-127V~ (America and Canada） Running Mode / Walking Mode Safety ClipWrenchSilicone Oil Remote ControlPower Cord BoltUser Manual 0102 01 Products and Accessories Welcome to use 1. Front Side2. Back Side 0304 02 Structural Plan Mobile BracketPower Access Power Swich Roller Antiskid Adhesive StripRunning Area HandrailFootpadFootpad Bolt Display Panel Antiskid Adhesive Strip Standby ModeManual ModeAutomatic Mode 3.Remote Control 0506 Accelera…

Text truncated - open the document above for the full version.

Beijing Kingsmith Technology Co.,Ltd Authority letter FCC Date: 10/26/2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ARDB-TRF0FB To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Beijing Kingsmith Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Wensong Li Title: Quality manager Signature: On behalf of Company: Beijing Kingsmith Technology Co.,Ltd

Beijing Kingsmith Technology Co.,Ltd Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Beijing Kingsmith Technology Co.,Ltd Floor 4 Bldg 25 Area 18 ABP Park Fengtai District Beijing PR China Regarding: Confidentiality Request regarding application for FCC ID: 2ARDB-TRF0FB LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Wensong Li Title: Quality manager Signature: On behalf of Company: Beijing Kingsmith Technology Co.,Ltd

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Declaration Letter Applicant Legal Business Name Beijing Kingsmith Technology Co.,Ltd Address Floor 4 Bldg 25 Area 18 ABP Park Fengtai District Beijing PR ChinaBeijing, 100071, -, China Grantee Code 2ARDB FCC ID 2ARDB-TRF0FB Authorized Contact Name Wensong Li Contact Email [email protected] Contact Phone 010 83680970 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 10/26/2021 Print Name: Wensong Li Title: Quality manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.0 Page: 1 of 4 Appendix External Photos for GZCR2105020238HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 4 - End of the Report -

100.6 mm 38.6 mm Motorized Treadmill Model No. : Max Load : Class : Manufacturer : Address : TRF0FB 100kg/220lbs HC Beijing Kingsmith Technology Co., Ltd. Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China. Power Input : Voltage : Frequency : 746W 100-127V~ 50/60Hz Correct Disposal of this product. Please read the user manual carefully before usage. MADE IN CHINA WARNING - To reduce the ri sk of personal injury, read and understand all the instructions before using this product. NO MEDICAL TREATMENT PURPOSE! MFG Date : 2021/11 SN : XXXXXX/00000001 FCC ID: 2ARDB-TRF0FB IC:25276-TRF0FB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.0 Page: 1 of 8 Appendix Internal Photos for GZCR2105020238HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 8 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 6 of 8 2.4GHz ANT SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 8 of 8 - End of the Report -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.0 Report No.: GZCR210502023804 Page: 1 of 10 Kobe Jian EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2105020238HS Applicant:Beijing Kingsmith Technology Co., Ltd Address of Applicant:Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Manufacturer:Beijing Kingsmith Technology Co., Ltd Address of Manufacturer:Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Factory:Beijing Kingsmith Technology Co., Ltd Address of Factory:Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Equipment Under Test (EUT): EUT Name:Motorized Treadmill Model No.: TRFxFB, TRFxFB-H ("X"represent 0~9)  Please refer to section 2 of this report which indicates which item was actually evaluated and which were electrically identical. Trade Mark:KINGSMITH Standard(s) : 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 KDB447498 D01 General RF Exposure Guidance DR04-44307 Date of Receipt: 2021-05-13 Date of Evaluation: 2021-05-31 Date of Issue: 2021-07-28 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023804 EMC-TRF-03 Rev 1.0 Page: 2 of 10 Revision Record VersionChapterDateModifierRemark 012021-07-28Original Authorized for issue by: Tested By Jim Li/Project Engineer Reviewed By Ricky Liu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023804 EMC-TRF-03 Rev 1.0 Page: 3 of 10 2Evaluation Summary Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. ¤ Declaration of EUT Family Grouping: Model No.: TRFxFB, TRFxFB-H ("X"represent 0~9) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference being the outer color, vignette and model name. Therefore, only the model TRF0FB was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023804 EMC-TRF-03 Rev 1.0 Page: 4 of 10 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Radio Spectrum Technical Requirement...............................................................................................7 5.1RF Exposure......................................................................................................................................7 5.1.1Test Requirement:.........................................................................................................................7 5.1.2Conclusion....................................................................................................................................8 6EUT Constructional Details (EUT Photos)...........................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023804 EMC-TRF-03 Rev 1.0 Page: 5 of 10 4General Information 4.1Details of E.U.T. Power supply:AC 100-127V~, 50/60Hz for main unit. DC 3V= size ‘AAA’ battery x 2 for 2.4 GHz remote control. Rated Power:746W Cable(s):AC mains, 3 wires, 2.0M, unshielded. RF Character:Refer to report GZCR210502023802 for BT BLE. Refer to report GZCR210502023803 for 2.4G Proprietary. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023804 EMC-TRF-03 Rev 1.0 Page: 6 of 10 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● NVLAP (Lab Code: 200611-0) SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Stan…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.0 Report No.: GZCR210502023803 Page: 1 of 35 FCC ID: 2ARDB-TRF0FB Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZCR2105020238HS Applicant: Beijing Kingsmith Technology Co., Ltd Address of Applicant: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Manufacturer: Beijing Kingsmith Technology Co., Ltd Address of Manufacturer: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Factory: Beijing Kingsmith Technology Co., Ltd Address of Factory: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Equipment Under Test (EUT): EUT Name: Motorized Treadmill Model No.: TRFxFB, TRFxFB-H ("X"represent 0~9) ¤ Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: KINGSMITH Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2021-05-13 Date of Test: 2021-05-18 to 2021-05-31 Date of Issue: 2021-07-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023803 Page: 2 of 35 Revision Record Version Chapter Date Modifier Remark 01 2021-07-28 Original Authorized for issue by: Jim Li /Project Engineer Ricky_Liu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023803 Page: 3 of 35 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. ¤ Declaration of EUT Family Grouping: Model No.: TRFxFB, TRFxFB-H ("X"represent 0~9) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference being the outer color, vignette and model name. Therefore, only the model TRF0FB was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZCR210502023803 Page: 4 of 35 3 Contents Page 1 Cover Page .................................................................................................................................................... 1 2 Test Summary ............................................................................................................................................... 3 3 Contents ........................................................................................................................................................ 4 4 General Information ..................................................................................................................................... 6 4.1 Details of E.U.T. ..................................................................................................................................... 6 4.2 Description of Support Units .................................................................................................................. 6 4.3 Measurement Uncertainty ...................................................................................................................... 6 4.4 Test Location ......................................................................................................................................... 7 4.1 Test Facility ............................................................................................................................................ 7 4.2 Deviation from Standards ...................................................................................................................... 8 4.3 Abnormalities from Standard Conditions ............................................................................................... 8 5 Equipment List .............................................................................................................................................. 9 6 Radio Spectrum Technical Requirement ................................................................................................. 12 6.1 Antenna Requirement .......................................................................................................................... 12 6.1.1 Test Requirement: ........................................................................................................................... 12 6.1.2 Conclusion ....................................................................................................................................... 12 7 Radio Spectrum Matter Test Results ........................................................................................................ 13 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz)................................................................. 13 7.1.1 E.U.T. Operation ....................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.0 Page: 1 of 3 Appendix Test Setup Photo for GZCR2105020238HS Test Model No.: TRF0FB EMC-ARF-04 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) RF Conducted Test EMC-ARF-04 Rev 1.0 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Page: 3 of 3 Radiated Emissions which fall in the restricted bands & Radiated Spurious Emissions