2ARDB-TRR11BMotorized Treadmill

ATHLETE APPROVED SINCE 1985 USER MANUAL M otorized Treadmill 3 D YNAMAX . FITNESS 2 RUNNINGPAD - USER MANUAL A T HLETE APPRO VED SI NCE 1985 A T HLETE APPRO VED SI NCE 1985 User ManualUser Manual IMPORTANT SAFETY INSTRUCTIONS Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ Industrie Canada applicables aux appareils radio exempts de licence. L’ exploitation est autorisée aux deux conditions suivantes : (1) l’ appareil ne doit pas produire de brouillage, et (2) l’ utilisateur de l’ appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’ en compromettre le fonctionnement. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC& IC Radiation Exposure Statement: This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’ IC sur l’ exposition aux radiations: Cet équipement est conforme aux limites d’ exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur. To reduce the risk of electric shock: Always unplug this appliance from the electrical outlet immediately after using and before cleaning. To reduce the risk of burns, fire, electric shock, or injury to persons: 1) An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. 2) Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. 3) Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4) Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 5) Do not carry this appliance by supply cord or use cord as a handle. 6) Keep the cord away from heated surfaces. 7) Never drop or insert any object into any opening. 8) Do not use outdoors. 9) Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 10) To disconnect, turn all controls to the off position, then remove plug from outlet. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine. WARNING WARNING DANGER 3 DYNAMAX . FITNESS 2 RUNNINGPAD - USER MANUAL ATHLETE APPROVED SINCE 1985ATHLETE APPROVED SINCE 1985 LEFT HANDLEBAR UPRIGHT ADJUSTMENT LEVER LEVIER DE RÉGLAGE VERTICAL DE LA BARRE DE GAUCHE HÖHENVERSTELLHEBEL FÜR LINKEN HANDLAUF PALANCA DE AJUSTE SOPORTE VERTICAL MANILLAR IZDO ALAVANCA DE AJUSTE VERTICAL DO GUIADOR ESQUERDO РЫЧАГ ДЛЯ ВЕРТИКАЛЬНОЙ РЕГУЛИРОВКИ ЛЕВОГО ПОРУЧНЯ 左のハンドルバーの直立部調節レバー 左侧手柄立柱调节杆 왼쪽 핸들바 수직 조정 레버 PRODUCT PRODUIT / PRODUKT / PRODUCTO / PRODUTO / ПРОДУКТ / 製品 / 产品 / 생산물 / جتنملا TOOL KIT BOÎTE À OUTILS / WERKZEUG / KIT DE HERRAMIENTAS / KIT DE FERRAMENTAS / НАБОР ИНСТРУМЕНТОВ / ツールキット / 工具套件 / 공구 키트 / PRODUCT ID IDENTIFIANT DU PRODUIT / PRODUKTNR. / ID DE PRODUCTO / ID DO PRODUTO / ПРОДУКТ ID / 製品 ID / 产品 ID / 제품 ID / MAIN PRODUCT PRODUIT PRINCIPAL HAUPTPRODUKT PRODUCTO PRINCIPAL PRODUTO PRINCIPAL ОСНОВНОЙ ПРОДУКТ 主要製品 主要产品 주요 제품 EN FR GER SPA POR RUS JAP ARA CHI KOR POWER CABLE CÂBLE D’ALIMENTATION NETZKABEL CABLE DE ALIMENTACIÓN CABO DE ALIMENTAÇÃO КАБЕЛЬ ПИТАНИЯ 電力ケーブル 电源线 전원 케이블 EN FR GER SPA POR RUS JAP ARA CHI KOR REMOTE CONTROL TÉLÉCOMMANDE FERNBEDIENUNG MANDO A DISTANCIA CONTROLO REMOTO ПУЛЬТ ДИСТАНЦИОННОГО УПРАВЛЕНИЯ リモートコントロール 遥控器 리모콘 EN FR GER SPA POR RUS JAP ARA CHI KOR SAFETY KEY CLÉ DE SÉCURITÉ SICHERHEITSSCHLÜSSEL LLAVE DE SEGURIDAD CHAVE DE SEGURANÇA КЛЮЧ БЕЗОПАСНОСТИ 安全キー 安全钥匙 안전 키 EN FR GER SPA POR RUS JAP ARA CHI KOR LANYARD CORDON SCHLÜSSELBAND CORDÓN CORDÃO ШНУР 引き綱 挂绳 랜야드 EN FR GER SPA POR RUS JAP ARA CHI KOR ALLEN KEY CLÉ ALLEN INBUSSCHLÜSSEL LLAVE ALLEN CHAVE ALLEN КЛЮЧ-ШЕСТИГРАННИК 製品 内六角扳手 생산물 EN FR GER SPA POR…

Text truncated - open the document above for the full version.

Beijing Kingsmith Technology Co.,Ltd Date: 16 July 2019 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ARDB-TRR11B To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Beijing Kingsmith Technology Co.,Ltd. This authorization is valid until further written notice from the applicant. Title: Compliance manager Name (Printed): Wensong Li Signature: On behalf of Company: Beijing Kingsmith Technology Co.,Ltd

Beijing Kingsmith Technology Co.,Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Beijing Kingsmith Technology Co.,Ltd Floor 4 Bldg 25 Area 18 ABP Park Fengtai District Beijing PR China Beijing China, 100071 Regarding: Confidentiality Request regarding application for FCC ID: 2ARDB-TRR11B LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Title: Compliance manager Name (Printed): Wensong Li Signature: On behalf of Company: Beijing Kingsmith Technology Co.,Ltd

External Photo

－ K1nssm1TH

Internal Photo

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 1 of 9 Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZEM1912017991CR Applicant: Beijing Kingsmith Technology Co.,Ltd Address of Applicant: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Manufacturer: Beijing Kingsmith Technology Co.,Ltd Address of Manufacturer: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Factory: Beijing Kingsmith Technology Co.,Ltd Address of Factory: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Equipment Under Test (EUT): EUT Name: Motorized Treadmill Model No.: DYCV-10221-120, TRR1F, TRR1F-H, TRR1F Pro, TRRyF, TRRyF-H, TRRyF Pro (“y” can be 2-99) ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: , Standard(s): 47 CFR Part 1.1307, Part 2.1093, KDB 447498 Date of Receipt: 2019-12-30 Date of Test: 2020-01-03 to 2020-01-07 Date of Issue: 2020-01-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2020-01-08 Original Authorized for issue by: Tested By 2020-01-03 to 2020-01-07 Jackson_Yuan /Project Engineer Date Checked By 2020-01-08 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 3 of 9 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, Part 2.1093, KDB 447498 CFR 47 Part 2.1093 CFR 47 Part 2.1093 Pass ¤ Declaration of EUT Family Grouping: Model No.: DYCV-10221-120, TRR1F, TRR1F-H, TRR1F Pro, TRRyF, TRRyF-H, TRRyF Pro (“y” can be 2-99) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the model name. Therefore only one model DYCV-10221-120 was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 4 of 9 3 Contents Page 1 Cover Page .................................................................................................................................................... 1 2 Test Summary ............................................................................................................................................... 3 3 Contents ........................................................................................................................................................ 4 4 General Information ..................................................................................................................................... 5 4.1 Details of E.U.T. ..................................................................................................................................... 5 4.2 Description of Support Units .................................................................................................................. 5 4.3 Test Location ......................................................................................................................................... 5 4.4 Test Facility ............................................................................................................................................ 6 4.5 Deviation from Standards ...................................................................................................................... 7 4.6 Abnormalities from Standard Conditions ............................................................................................... 7 5 Radio Spectrum Technical Requirement ................................................................................................... 8 5.1 RF Exposure .......................................................................................................................................... 8 5.1.1 Test Requirement: ............................................................................................................................. 8 5.1.2 Conclusion ......................................................................................................................................... 8 6 Photographs ................................................................................................................................................. 9 6.1 EUT Constructional Details .................................................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 5 of 9 4 General Information 4.1 Details of E.U.T. Power Supply: AC 110-127V 60Hz DC 3V 'CR2032' battery for remote controller (FCC ID: 2ARDB-TRR11F) Test Voltage: AC 120 V, 60 Hz Cable: about 0.8m x 3 wires unscreened AC mains cable Antenna Gain 5.3 dBi Antenna Type PCB Antenna Channel Spacing 2MHz Modulation Type GFSK Number of Channels 40 Operation Frequency 2402MHz to 2480MHz Software EMI Tools.exe 4.2 Description of Support Units Description Manufacturer Model No. Serial No. NoteBook IBM T30 S/N78-3VMLX 06/01 BT test board SGS EMC RF 07 RF 07 4.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799102 Page: 6 of 9 4.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations:  NVLAP (Lab Code: 200611-0) SGS-CSTC Sta…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799101 Page: 1 of 52 FCC ID: 2ARDB-TRR11B Kobe Jian EMC Laboratory Manager TEST REPORT Application No.: GZEM1912017991CR Applicant: Beijing Kingsmith Technology Co.,Ltd Address of Applicant: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Manufacturer: Beijing Kingsmith Technology Co.,Ltd Address of Manufacturer: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Factory: Beijing Kingsmith Technology Co.,Ltd Address of Factory: Floor 4, Building 25, Area 18, ABP Park, Fengtai, Beijing, China Equipment Under Test (EUT): EUT Name: Motorized Treadmill Model No.: DYCV-10221-120, TRR1F, TRR1F-H, TRR1F Pro, TRRyF, TRRyF-H, TRRyF Pro (“y” can be 2-99) ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Standard(s): 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2019-12-30 Date of Test: 2020-01-03 to 2020-01-07 Date of Issue: 2020-01-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799101 Page: 2 of 52 Revision Record Version Chapter Date Modifier Remark 01 2020-01-08 Original Authorized for issue by: Tested By 2020-01-03 to 2020-01-07 Jackson_Yuan /Project Engineer Date Checked By 2020-01-08 Ricky_Liu /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799101 Page: 3 of 52 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(c) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass ¤ Declaration of EUT Family Grouping: Model No.: DYCV-10221-120, TRR1F, TRR1F-H, TRR1F Pro, TRRyF, TRRyF-H, TRRyF Pro (“y” can be 2-99) According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on the model name. Therefore only one model DYCV-10221-120 was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch Report No.: GZEM191201799101 Page: 4 of 52 3 Contents Page 1 Cover Page .................................................................................................................................................... 1 2 Test Summary ............................................................................................................................................... 3 3 Contents ........................................................................................................................................................ 4 4 General Information ..................................................................................................................................... 6 4.1 Details of E.U.T. ..................................................................................................................................... 6 4.2 Description of Support Units .................................................................................................................. 7 4.3 Measurement Uncertainty ...................................................................................................................... 7 4.4 Test Location ......................................................................................................................................... 7 4.5 Test Facility ............................................................................................................................................ 8 4.6 Deviation from Standards ...................................................................................................................... 9 4.7 Abnormalities from Standard Conditions ............................................................................................... 9 5 Equipment List ............................................................................................................................................ 10 6 Radio Spectrum Technical Requirement ................................................................................................. 13 6.1 Antenna Requirement .......................................................................................................................... 13 6.1.1 Test Requirement: ........................................................................................................................... 13 6.1.2 Conclusion ......................................................................................................................................…

Text truncated - open the document above for the full version.

Test Setup Photo 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup 1.2 Radiated Emissions which fall in the restricted bands Test Setup 1.3 Radiated Spurious Emissions Test Setup