2ARRB-PIP10PUDigital Audio Baby Monitor

MOTOROLA PIP10 DIGITAL AUDIO BABY MONITOR For: PIP10 User Guide Safety instructions WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adaptors. Only use the AC Adaptors provided. Baby monitor setup and use: •Determine a location for the baby unit that will allow you to hear your baby in his/her cot. •Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or mount the unit to a wall securely using the keyhole slots under the stand. •NEVER place the baby unit or cords within the cot. WARNING This digital audio baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User Guide, safe to use. Therefore, always read the instructions in this User Guide carefully before using the device. •Adult assembly is required. Keep small parts away from children when assembling. •This product is not a toy. Do not allow children to play with it. •This digital audio baby monitor is not a substitute for responsible adult supervision. •Keep this User Guide for future reference. •Keep the cords out of reach of children. •Do not cover the digital audio baby monitor with a towel or blanket. •Test this monitor and all its functions so that you are familiar with it prior to actual use. •Do not use the digital audio baby monitor in damp areas or close to water. •Do not install the digital audio baby monitor in extreme cold or heat, direct sunlight, or close to a heat source. •Do not touch the plug contacts with sharp or metal objects. •Connect the power adaptors to easily accessible mains power. CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Welcome... to your new Motorola PIP10 Audio Baby Monitor! • Secure, interference free reception and high-quality sound. • Long range up to 160 feet indoors and 1000 feet outdoors. • Microphone with high sensitivity. • Battery powered portable parent unit. • Expandable up to 2 parent units. • Parent unit with mute function and alert indicator. • Out of range and low battery alarm. Need help? If you have any problems setting up or using your PIP10, please visit us at motorolanursery.com/support. Alternatively, you may find the answer in the ‘Help’ section at the back of this guide. This User Guide provides you with all the information you need to get the most from your digital audio baby monitor. Read the instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. Before you use the digital audio baby monitor, set up the parent and baby units. Follow the simple instructions in ‘Getting started’, on the next few pages. Important Only use the power adaptors supplied. Got everything? • Parent unit • Baby unit • AC power adaptor for the parent unit • AC power adaptor for the baby unit If you have purchased PIP10 dual parent units, you will also have the following additional items: • Parent unit • AC power adaptor for the parent unit 6 1.Getting started ...................................................................8 2.Getting to know your baby monitor ..........................11 3.Using the digital audio baby monitor .......................13 3.1 Turn the baby unit on / off ...........................................................................13 3.2 Turn the parent unit on / off ........................................................................13 3.3 Adjust the speaker volume on the parent unit .....................................13 3.4 Mute the speaker ..............................................................................................13 3.5 Sound alert .........................................................................................................13 4.Help .......................................................................................14 5.Technical Specifications .................................................15 6.General information ........................................................16 7 < This page has been intentionally left blank > 8 Getting started 1.Getting started Location Important Do not place your PIP10 in the bathroom or other humid areas. Place your units within reach of the AC power outlet and wall socket. The socket-outlet should be installed near the equipment and should be easily accessible. Range of parent and baby units Make sure the distance between the parent unit and baby unit is less than 300 metres. Setting up Important The baby unit must be plugged into the AC power at all times. Use only the AC power adaptor supplied with the product. 9 Getting started Connecting the baby unit 1. Plug the DC plug of the power adaptor into the DC jack on the rear of the baby unit and plug the other end of the AC adaptor into the AC power outlet. 2. Switch on the AC power. Installing batteries (not supplied) into the parent unit 1. Lift up the battery cover to remove it from the the parent unit. 10 2. Insert the battery cells (not supplied). Note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction. 3. Slide the battery cover back into place. Note You can either purchase non-rechargeble battery cells (2 x AAA batteries) or rechargeable NIMH battery cells (2 x AAA batteries) for the parent unit. Connecting the parent unit You will need to carry out this process for the single or dual parent units. 1. Plug the DC plug of the power adaptor into the DC jack on the side of the parent unit and plug the other end of the AC adaptor into the AC power outlet. 2. Switch on the AC power. The parent unit turns on. Note The parent unit will not start charging if rechargeable NIMH battery cells are installed. Your PIP10 is now ready for use. Getting started 11 2. Getting to know your baby monit…

Text truncated - open the document above for the full version.

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] FCC Confidential Authorization Date: 2021-07-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ARRB-PIP10PU In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Meizhou Guo Wei Electronics Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Raymond Leung Engineering Manager

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 1 of 5 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 4 of 5 Adapter 1 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 5 of 5 Adapter 2

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 1 of 5 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 4 of 5 Chip Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 5 of 5 Antenna

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. SAR TEST REPORT For Meizhou Guo Wei Electronics Co., Ltd AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. FCC ID: 2ARRB-PIP10PU IC: 20353-PIP10PU Report Type: Original Report Product Type: Digital Audio Baby Monitor Report Number: SZ1210610-22665E-SA Report Date: 2021-06-28 Reviewed By: Seven Liang SAR En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) ,6F,7F,the 3rd Phase of Wan Li Industrial Building D,Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210610-22665E-SA SAR Test Report 2 of 64 Attestation of Test Results EUT Information EUT Description Digital Audio Baby Monitor Tested Model PIP10PU FCC ID 2ARRB-PIP10PU IC 20353-PIP10PU Serial Number SZ1210610-22665E-SA-S_9K6 Test Date 2021/06/26 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) DECT 1g Face-up SAR 0.01 1.6 10g Extreme SAR 0.02 4.0 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques RSS-102 Issue 5 March 2015 Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands). IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06. KDB 648474 D04 Handset SAR v01r03. KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210610-22665E-SA SAR Test Report 3 of 64 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION ................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES ................................................................................................. 6 SAR LIMITS ................................................................................................................................................................ 7 FACILITIES ................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION ................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION ............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION .......................................................................................................................... 17 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 19 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ............................................................................. 19 TEST DISTANCE FOR SAR EVALUATION ................................................................................................................... 19 SAR EVALUATION PROCEDURE ................................................................................................................................ 20 CONDUCTED OUTPUT POWER MEASUREMENT .......................................................................................... 21 PROVISION APPLICABLE ............................................................................................................................................ 21 TEST P…

Text truncated - open the document above for the full version.

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15D RSS-GEN ISSUE 5, FEBRUARY 2021 AMENDMENT 2 RSS-213, ISSUE 3, MARCH 2015 MEASUREMENT AND TEST REPORT For Meizhou Guo Wei Electronics Co., Ltd AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. FCC ID: 2ARRB-PIP10PU IC: 20353-PIP10PU Report Type: Original Report Product Type: Digital Audio Baby Monitor Re port Number: SZ1210610-22665EB Re port Date: 2021-06-29 Reviewed B y: Jimmy Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210610-22665EB FCC PART 15D RSS-GEN ISSUE 5, FEBRUARY 2021 AMENDMENT 2 RSS-213, ISSUE 3, MARCH 2015 Page 2 of 62 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS ........................................................................................................ 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 6 SUMMARY OF TEST RESULTS ............................................................................................................................... 7 TEST EQUIPMENT LIST ........................................................................................................................................... 8 §2.1093 & RSS-102 RF EXPOSURE ............................................................................................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 TEST RESULT ............................................................................................................................................................. 10 § 15.317, § 15.203 & RSS-GEN §6.8 ANTENNA REQUIREMENT ....................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 § 15.315, § 15.207 & RSS-213 §5.4 CONDUCTED EMISSIONS ............................................................................ 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER SETUP ....................................................................................................................................... 13 TEST PROCEDURE ...................................................................................................................................................... 13 CORRECTED FACTOR & MARGIN CALCULATION ....................................................................................................... 13 TEST DATA ................................................................................................................................................................ 14 § 15.323 (A) & RSS-213 §5.5 EMISSION BANDWIDTH .....................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 1 of 2 EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210610-22665E-RF Page 2 of 2 Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)