2ARRB-PIP1710CBUVideo baby monitor

nursery User Guide Important Notes: Charge the parent unit of PIP1710 HD TOUCH CONNECT for 16 hours before use. 5.0" Wi-Fi® H D Motorized Video Baby Moni tor with Touch Screen For: PIP1710 HD TOUCH CONNECT PIP1710-2 HD TOUCH CONNECT PIP1710-3 HD TOUCH CONNECT PIP1710-4 HD TOUCH CONNECT Safety instructions WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Baby monitor setup and use: •Choose a location for the baby unit that will provide the best view of your baby in their crib. •Place the baby unit on a flat surface, such as a dresser, desk, shelf or wall mount the unit securely with the wall mount bracket provided in the pack. •NEVER place the baby unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away). WARNING This Smart Video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User Guide, safe to use. Therefore, always read the instructions in this User Guide carefully before using the device. •Adult assembly is required. Keep small parts away from children when assembling. •This product is not a toy. Do not allow children to play with it. •This baby monitor is not a substitute for responsible adult supervision. •Keep this User Guide for future reference. •Do not place the baby (camera) unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away). •Keep the cords out of reach of children. •Do not cover the baby monitor with a towel, blanket, or other item that will stop air circulation. •Never use extension cords with power adapters. Only use the power adapters provided. •Test this monitor and all its functions so that you are familiar with it prior to actual use. •Do not use the baby monitor near water or allow water or other foreign substances to enter the power port or adapter. •Do not place the Baby Monitor near a heat source. •Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery packs. •Do not touch the plug contacts with sharp or metal objects. •The unit should be set up and used so that parts of the user's body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more. •The wall mounting height is less than 2 m for the baby unit. CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Welcome... to your new Smart Video Baby Monitor! Thank you for purchasing your new Smart Nursery product. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Important To use your baby and parent units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete between the baby and parent units may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. Other 2.4GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, microwave ovens or other baby monitors, may cause interference with this product, so keep the baby monitor at least 5 ft (1.5 m) away from these types of products, or switch them off if they appear to be causing interference. If the signal is weak, try moving the parent and/or the baby unit(s) to different positions in rooms. Need help? If you have any problems setting up or using your PIP1710 HD TOUCH CONNECT, PIP1710-2 HD TOUCH CONNECT, PIP1710-3 HD TOUCH CONNECT or PIP1710-4 HD TOUCH CONNECT, please visit us at: motorolanursery.com/support Alternatively, you may find the answer in the ‘Help’ section at the back of this guide. This User Guide provides you with all the information you need to get the most from your Smart Video Baby Monitor. Read the instructions carefully, and be aware that this Smart Video Baby Monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. Before you use the Smart Video Baby Monitor, set up the parent and baby units. Follow the simple instructions in ‘Getting started’, on the next few pages. Important Use only the supplied power adapter (DC5V / 1500 mA) for the camera unit and (DC5V / 2000mA) for the parent unit. Got everything? •Parent unit with built-in rechargeable Lithium-ion battery •Baby (camera) unit •AC power adapter for the parent unit •AC power adapter for the baby (camera) unit •Wall mount bracket and screws If you have purchased multi camera pack, you will also have the following additional items: •Baby (camera) unit(s) •AC power adapter(s) for the baby (camera) unit(s) For Wi-Fi® internet viewing you will need a suitable Android or iPhone/iPad device and Wi-Fi® internet connection of at least 0.6 Mbps upload bandwidth per baby (camera) unit. 1. Welcome This booklet provides you the quick start information of your PIP1710 HD TOUCH CONNECT. For a full explanation of all features, download the user guide from motorolanursery.com. 2. Contents inside the box USB Type C cable Strangula tion Hazar d. Children ha v e S TRANGLED in c ords. K eep this c o rd out of the reach of child r en (mo re than 1 met r e a wa y). Ne v er use e xtension co r ds with AC A daptors. Only use the AC Adap t ors pr o vided. W ARNING DC round socket adapter (for the baby/camera unit) Baby unit Wall mounting screws and wall anchors Quick Start Guide Quick Start Guide Parent unit Need help? If you have problems setting up or using your PIP1710 HD TOUCH CONNECT, p…

Text truncated - open the document above for the full version.

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2023-09-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2ARRB-PIP1710CBU Meizhou Guo Wei Electronics Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely Yours, Raymond Leung Engineering Manager Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China.

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2023-09-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2ARRB-PIP1710CBU Meizhou Guo Wei Electronics Co., Ltd certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely Yours, Raymond Leung Engineering Manager Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China.

U.S. AGENT LETTER OF ATTESTATION Date: 2023-04-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d) (7) Filing Meizhou Guo Wei Electronics Co., Ltd certifies that, as of the date of the filing of the application, Meizhou Guo Wei Electronics Co.,LLC is our designated U.S. agent for service of process for FCC ID. Meizhou Guo Wei Electronics Co.,Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Meizhou Guo Wei Electronics Co.,LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for FCC ID. Designated U.S. Agent Information: Company Name: Meizhou Guo Wei Electronics Co.,LLC Address: 16192 Coastal Highway,Lewes,Delaware 19958,Country of Sussex,USA FRN: 0033625732 Tel.: +44 7776 228522 Email: [email protected] Signed by (printed name): Malcolm Paton Signature: Applicant: Meizhou Guo Wei Electronics Co.,Ltd Address: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong , China. FRN: 0027997733 Tel: +86- 0755-2573 6666 Email: [email protected] Signed by (printed name): Raymond Leung Signature:

QA-FR-170-B Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] FCC Authorization Date: 2023-09-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Meizhou Guo Wei Electronics Co., Ltd , the undersigned, Hereby China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, Meizhou Guo Wei Electronics Co., Ltd ,the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Raymond Leung Engineering Manager

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] FCC Confidential Authorization Date: 2023-09-16 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ARRB-PIP1710CBU In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Meizhou Guo Wei Electronics Co., Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Raymond Leung Engineering Manager

Meizhou Guo Wei Electronics Co., Ltd ADD: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Tel: 0755-2573 6666 Email: [email protected] Attestation Letter FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-09-16 To Whom It May Concern, Our product: Product Name: Video baby monitor, Model: PIP1710 HD TOUCH CONNECT BU, FCC ID: 2ARRB-PIP1710CBU, for use in America and this product only supports 2.4GHz FHSS(2402-2477MHz) and 2.4G Wi-Fi (2412-2462MHz/2422- 2452MHz; 802.11b/g/n-HT20/n-HT40 mode). The other functions, bands and modes has been shielded by the manufacturer using the software, the end user has no capability to activate it. Sincerely, Raymond Leung Engineering Manager

MODEL: PIP1710 HD TOUCH CONNECT BU FCC ID: 2ARRB-PIP1710CBU IC: 20353-PIP1710CBU HVIN: PIP1710 HD TOUCHCBU Made in China SN: FFFGGCCYYWWXXXXXX 5V 1.5A BU Label Size: 32x22.3mm MODEL: PIP1710 HD TOUCH CONNECT BU FCC ID: 2ARRB-PIP1710CBU IC: 20353-PIP1710CBU HVIN: PIP1710 HD TOUCHCBU Made in China SN: FFFGGCCYYWWXXXXXX 5V 1.5A For WIFI module BL-M8189FS5 only V1 2023.09.14 Release

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 1 of 10 EUT INTERNAL PHOTOGRAPHS uncover China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 2 of 10 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 3 of 10 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 4 of 10 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 5 of 10 Wi-Fi ANT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 6 of 10 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 7 of 10 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 8 of 10 FHSS ANT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 9 of 10 chip chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-INP Page 10 of 10

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-00A Page 63 of 67 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.1.2 Measurement Result Radio Frequency (MHz) λ/2Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP dBmmW Wi-Fi 2412-2462 19.80 200 768 21.5 3.66 23.01 199.99 FHSS 2.4G 2402-2477 19.80 200 768 17.0 3.14 17.99 62.95 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. The Wi-Fi and FHSS cann transmit simultaneously. The ratio = ERP Wi-Fi + ERP FHSS = 199.99/768+ 62.95/768=0.342<1 Result: The device compliant the MPE-Based Exemption at 20cm distances.

Antenna Specification Model Name 2.4G WiFi ANT Frequency 2412MHz 2437MHz 2462MHz Gain (dBi) 3.66 dBi 3.41 dBi 3.05 dBi MAX. Gain 3.66 dBi Impedance 50 Ω Manufacturer Meizhou Guo Wei Electronics Co., Ltd. AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. Antenna Photo & Length (mm)

TEST REPORT Applicant: Meizhou Guo Wei Electronics Co., Ltd. Address: AD1 Section, Economic Development Area, Dongsheng Industrial District, Meizhou, Guangdong, China. FCC ID: 2ARRB-PIP1710CBU IC: 20353-PIP1710CBU HVIN: PIP1710 HD TOUCHCBU Product Name: Video baby monitor Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230744649-00A Date Of Issue: 2023/9/13 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-00A Page 2 of 67 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-00A Page 3 of 67 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 9 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 14 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 14 3.1.4 Test Procedure ............................................................................................................................................. 15 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.2 RADIATED SPURIOUS EMISSIONS ...................................................................................................... 16 3.2.1 Applicable Standard ..................................................................................................................................... 16 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ............................................................................................................................................. 17 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 18 3.3 MINIMUM 6 DB BANDWIDTH: ..............................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-00A-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230744649-00A-TSP Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View