2ATLB-PW5117BKCHARGEPRO CHARGING PUCK

FUNCIONAMIENTO GENERAL Y CARGA DEL TELÉFONO Conecte la estación de carga a un tomacorriente de pared. Recomendamos utilizar un cargador Power Delivery de 20 W para obtener la carga más rápida. Puedes combinar el cargador recomendado con el cable USB-C incluido. Puede colocar su teléfono en posición horizontal, apuntando en cualquier dirección. Cualquier posición entregará la misma potencia y no afectará el tiempo de carga. La luz de estado se comportará de la siguiente manera: ESPECIFICACIONES TÉCNICAS ▪ Compatible con los estándares Qi TM ▪ Protección contra sobrecalentamiento y sobrecarga ▪ Indicador de carga falsa ▪ Puerto de carga: USB C ▪ Entrada (VCC/A): 5/2 - 9/2 - 12/2 ▪ Salidas inalámbricas (VDC/A): 5W - 7,5W - 10W - 15W ▪ Rango de carga inalámbrica (mm): ≤ 6 ▪ Eficiencia de carga (%): 73 ▪ Rango de frecuencia de carga: (KHz): 110 - 205 ▪ Dimensiones (mm): 100 x 100 x 9,5 ▪ Peso (gr): 95 125.00 mm 91.50 mm FRONT SIDE IMPORTANT SAFETY RECOMMENDATIONS Thank you for choosing the ChargePRO Travel Charger. Your new station is compatible with all major phone brands and devices that support Qi TM standards. Please read this manual carefully before using the device for the first time; failing to do so may result in permanent damage to the device and/or severe personal injuries. Please note that wireless chargers have generally been considered more convenient than their wired counterparts; however, the charging times may be longer. This wireless charger is compatible with slim phone cases; however, it is recommended not to place foreign objects between the device and this unit. Objects such as credit cards and metal plates, among others, could affect the unit's performance, causing overheating or irreversible damage to your device and the charger. When connecting the device to a power outlet, please avoid applying undesirable tension to the charging cable. Also, please avoid running the cable where it can be accidentally tripped. While the device is charging, keep it away from water or moist environments. To avoid the device overheating, do not place it near any heat source, such as a stove, heat radiators, or direct sun. Environmental conditions might affect the efficiency of the charge; therefore, it is recommended to charge your device in temperatures below 104°F. To prevent an electric hazard and void your device's warranty, do not attempt to open or modify it. If you require to perform any service to it, please refer to a professional. IMPORTANTES RECOMENDACIONES DE SEGURIDAD Gracias por elegir cargador viajero ChargePRO. Su nueva estación es compatible con todas las principales marcas de teléfonos y dispositivos que compatibles con los estándares Qi TM . Lea este manual cuidadosamente antes de usar el dispositivo por primera vez; no hacerlo puede resultar en daños permanentes al dispositivo y/o lesiones personales graves. Por favor contemple que los cargadores inalámbricos, han sido generalmente considerados más conveniente que sus contrapartes con cable; sin embargo, los tiempos de carga, podría resultar mas extensos. Este cargador inalámbrico es compatible con fundas delgadas para teléfonos; sin embargo, se recomienda no colocar objetos que se inetrpongan entre el dispositivo y esta unidad. Objetos como tarjetas de crédito y placas de metal, entre otros, pueden afectar el rendimiento de la unidad, causando sobrecalentamiento o daños irreversibles a su dispositivo y al cargador. Al conectar el dispositivo a una toma de corriente, evite aplicar tensión no deseada al cable de carga. Además, evite colocar el cable en lugares donde accidentalmente pueda ser tropezado. Mientras el dispositivo se está cargando, manténgalo alejado del agua o ambientes húmedos. Para evitar el sobrecalentamiento del dispositivo, no lo coloque cerca de ninguna fuente de calor, como una estufa, radiadores de calor o luz solar directa. Las condiciones ambientales podrían afectar la eficiencia de la carga; por lo tanto, se recomienda cargar su dispositivo a temperaturas inferiores a 40°C. Para prevenir riesgos eléctricos y anular la garantía de su dispositivo, no intente abrirlo o modificarlo. Si necesita realizar algún servicio, consulte a un profesional. PRODUCT DESCRIPTION LEGEND 1.Charging area 2. Status light 3.USB-C chargeng port INSIDE THE BOX Wireless charger ▪ U SB-C charging cable ▪ User’s manual GENERAL OPERATION AND PHONE CHARGING Connect the charging station to a wall outlet. We recommend using a Power Delivery 20W charger to get the fastest charge. You can combine the recommended charger with the USB-C cable included. You can place your phone lying flat, pointing in any direction. Any position will deliver the same power and won't affect the charging time. The status light will behave as follows: TECHNICAL SPECIFICATIONS ▪ Compatible with Qi TM standards ▪ Overheat & overcharge protection ▪ False charging indicator ▪ Charging port: USB-C ▪ Input (VDC/A): 5/2 - 9/2 - 12/2 ▪ Wireless outputs (VDC/A): 5W - 7.5W - 10W - 15W ▪ Wireless charging range (in): ≤ 0.2 ▪ Charging efficiency (%): 73 ▪ Charging frequency range: (KHz): 110 - 205 ▪ Dimensions (in): 3.9 x 3.9 x 0.4 ▪ Weight (oz): 3.4 SUPPORT If you require additional help, please don't doubt to contact us at [email protected] or visit www.unnotekno.com. LEGAL NOTICE All names, logos, images and registered trademarks are property of their respective owners. Images and colors may differ from actual product. © 2024Unno Tekno LLC. All Rights Reserved. BACK SIDE SOPORTE Si requiere ayuda adicional, no dude en comunicarse con nosotros a [email protected] o visite www.unnotekno.com. AVISO LEGAL Todos los nombres, logotipos, imágenes y marcas registradas son propiedad de sus respectivos dueños. Imágenes y colores podrían dif erir del producto real. © 2024 Unno Tekno LLC. Todos los derechos reservados. PW5117BK USER'S MANUAL PW5117BK DESCRIPCIÓN DEL PRODUCTO MANUAL DE USUARIO LEYENDA 1.Área de carga 2. Luz de estado 3.Puerto de carga USB-C DENTRO …

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Unno Tekno LLC FRN: 0031449150 Contact Name: Walter Katsef Address: 6451 NW 102nd Ave. Suite 4 Doral FL 33178, United States Telephone No: (786) 536-5289 Email: [email protected] Applicant: Company name: Shenzhen Shuo Yu Technology co.,LTD FRN: 0028549996 Product Description: CHARGEPRO CHARGING PUCK Grantee code: 2ATLB FCC ID: 2ATLB-PW5117BK Contact Name: YuanYuan Long Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong, China Telephone No: 13827486068 Email: [email protected] [Shenzhen Shuo Yu Technology co.,LTD] certifies that, as of the date of this filing of the application with the TCB, [Unno Tekno LLC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Shuo Yu Technology co.,LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Unno Tekno LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 08.31.2024 Applicant’s Name: YuanYuan Long US Agent’s Name: Walter Katsef Title: Manager Title: Operations Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Shuo Yu Technology co.,LTD Grantee code: 2ATLB FRN: 0028549996 FCC ID: 2ATLB-PW5117BK Contact Name: YuanYuan Long Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong, China Telephone No: 13827486068 Fax No: 0755-89342952 Email: [email protected] i. [Shenzhen Shuo Yu Technology co.,LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ Shenzhen Shuo Yu Technology co.,LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Shenzhen Shuo Yu Technology co.,LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 08.31.2024 Applicant’s Name: YuanYuan Long Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Shuo Yu Technology co.,LTD Product Similarity Declaration Product name: CHARGEPRO CHARGING PUCK Model name: PW5117BK, PW5115BK, PW5119BK FCC ID: 2ATLB-PW5117BK We (Shenzhen Shuo Yu Technology co.,LTD) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: YuanYuan Long Title: Manager Date: 08.31.2024

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Shuo Yu Technology co.,LTD Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong, China Product Name: CHARGEPRO CHARGING PUCK Model Number: PW5117BK, PW5115BK, PW5119BK FCC Identifier: 2ATLB-PW5117BK We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: YuanYuan Long Date: 8/31/2024 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Shuo Yu Technology co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 8/31/2024 Subject: Request for Confidentiality FCC ID: 2ATLB-PW5117BK To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: YuanYuan Long Title: Manager

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (External Photos) Model: PW5117BK Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected]

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: PW5117BK Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Coil Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Test Report Report No.: MTi240529011-01E2 Date of issue: 2024-07-17 Applicant: ShenZhen ShuoYu Technology Co.,LTD Product: CHARGEPRO CHARGING PUCK Model(s): PW5117BK, PW5115BK, PW5119BK FCC ID: 2ATLB-PW5117BK Shenzhen Microtest Co., Ltd. http://www.mtitest.cn Instructions Page 2 of 13 Report No.: MTi240529011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 13 Report No.: MTi240529011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Measurement uncertainty ............................................................................................................... 6 3 Test facilities and accreditations .................................................................................................... 7 3.1 Test laboratory .................................................................................................................................................... 7 4 List of test equipment ..................................................................................................................... 8 5 Test result ........................................................................................................................................ 9 5.2 Test setup ......................................................................................................................................................... 10 5.3 Test Procedures ................................................................................................................................................ 10 5.4 Information of test equipment ........................................................................................................................... 11 5.5 Test results ....................................................................................................................................................... 12 Photographs of the Test Setup ............................................................................................................ 13 Photographs of the EUT....................................................................................................................... 13 Page 4 of 13 Report No.: MTi240529011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Test Result Certification Applicant: ShenZhen ShuoYu Technology Co.,LTD Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong Manufacturer: ShenZhen ShuoYu Technology Co.,LTD Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong Product description Product name: CHARGEPRO CHARGING PUCK Trademark: Pointuch Model name: PW5117BK Series Model: PW5115BK, PW5119BK Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 D01 Wireless Power Transfer v04 Date of Test Date of test: 2024-07-06 to 2024-07-12 Te s t result: Pass Test Engineer : (James Qin) Reviewed By : (David Lee) Approved By : (Leon Chen) Page 5 of 13 Report No.: MTi240529011-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: CHARGEPRO CHARGING PUCK Model name: PW5117BK Series Model: PW5115BK, PW5119BK Model difference: All the models are the same circuit and module, except the model name. Electrical rating: Input: DC 5V/ 2A, 9V/ 2A, 12V/ 2A Wireless Output: 15W(Max) Accessories: N/A Hardware version: V1.0 Software version: V1.0 Test sample(s) number: MTi240529011-01S1001 RF specification: Operation frequency: 115 kHz – 205 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission …

Text truncated - open the document above for the full version.

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Test Report Report No.: MTi240529011-01E1 Date of issue: 2024-07-17 Applicant: ShenZhen ShuoYu Technology Co.,LTD Product name: CHARGEPRO CHARGING PUCK Model(s): PW5117BK, PW5115BK, PW5119BK FCC ID: 2ATLB-PW5117BK Shenzhen Microtest Co., Ltd. http://www.mtitest.cn Page 2 of 24 Report No.: MTi240529011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 24 Report No.: MTi240529011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 6 1.4 Description of support units ....................................................................................................................... 6 1.5 Measurement uncertainty .......................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and accreditations ................................................................................................... 8 3.1 Test laboratory ........................................................................................................................................... 8 4 List of test equipment ...................................................................................................................... 9 5 Evaluation Results (Evaluation) .................................................................................................... 10 5.1 Antenna requirement ............................................................................................................................... 10 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 11 6.1 Conducted Emission at AC power line .................................................................................................... 11 6.2 20dB Occupied Bandwidth ...................................................................................................................... 14 6.3 Emissions in frequency bands (below 30MHz)........................................................................................ 17 6.4 Emissions in frequency bands (30MHz - 1GHz)...................................................................................... 20 Photographs of the test setup ............................................................................................................. 23 Photographs of the EUT....................................................................................................................... 24 Page 4 of 24 Report No.: MTi240529011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Test Result Certification Applicant: ShenZhen ShuoYu Technology Co.,LTD Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong Manufacturer: ShenZhen ShuoYu Technology Co.,LTD Address: 302, No. 1, Gankeng Tongfuyu Industrial Zone, Gankeng Community, Jihua Street, Longgang District, Shenzhen, Guangdong Product description Product name: CHARGEPRO CHARGING PUCK Trademark: Pointuch Model name: PW5117BK Series Model(s) : PW5115BK, PW5119BK Standards: 47 CFR Part 15C Test Method: ANSI C63.10-2013 Date of Test Date of test: 2024-07-06 to 2024-07-12 Test result: Pass Test Engineer : (James Qin) Reviewed By : (David Lee) Approved By : (Leon Chen) Page 5 of 24 Report No.: MTi240529011-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: CHARGEPRO CHARGING PUCK Model name: PW5117BK Series …

Text truncated - open the document above for the full version.

深圳市深广电子科技有限公司 Shenzhen Shenguang Electronic Technology Co.,LTD 客户/Ciient 硕宇 名称/TYPE 发射线圈 50MM 产品型号 Model NO 6.5uH ±10% 产品编号 00080500001 Part nunbering systey 客户料号 Cient p/NO 工程编号 Enginrer NO TQE 1800510003 日期/Date 2019-09-19 本公司工程部/For Enginer Departner Only 修改内容/Rrvised Cintent 认可日期/APProved Date 编制/Prepared 审核/Checked 认可/Approved 段家旺谢良谢小仔 客户认可回签/Authorixed Signaturure Company Chop 工程/ Enginrer 认可/QC APProved 认可日期/APProved 深圳市深广电子科技有限公司 Shenzhen Shenguang Electronic Technology Co.,LTD 一、 线圈工艺/Winding Procese: NO 绕组 线规 匝数 绕线方向 备注 1 N1 2UEW-B-0. 08 *105P 10TS CCW 2 二．电气性能/FEATURES: 1.测试条件（Test conditions）：25 °C,65%RH@100KHz/1V 1.1 电感量（Inductance） 1.11 L0A（单独线圈）=3.8uH±20% 1.12 L0A(线圈+磁片)=6.3uH±10% 1.2 Q值=90MIN 1.3 直流电阻（DCR）：45mΩ MAX 1.4 工作温度(Operating Temperature)：-25°C~85°C 2.测试仪器(Test instrument)： L:创达1068+1310;DCR:502BC;SIZE:Callipers 3.材料清单 N O 项目 材料 1 WIRE ￠0.08*105p 2UEW-1.15mm 2 FERRITE 50*5.3*1.0 L型槽 铁氧体硬磁 PC95材 3 GLUE 白胶 4 SOLDER XCD-907B 5 Adhesive 双面背胶 6 High temperature adhesive 8MM高温胶带 7 深圳市深广电子科技有限公司 Shenzhen Shenguang Electronic Technology Co.,LTD 三 ．电路图/CIRCUIT DIAGRAM 单位： MM 四．外形图/OUTSIDEDIAGRA 注：线圈出线位置缠绕8MM（ref）高温胶纸 Note: Wrap 8MM (ref) high temperature adhesive paper around coil outlet position 标准 A B C D E F G STD 50±0.5 43.5±1 20.5±0.5 5±0.5 25±1 3±1 2.6Max 单位： MM 8 深圳市深广电子科技有限公司 Shenzhen Shenguang Electronic Technology Co.,LTD 五．包装/PACKAGE 5.3包装以现有包装盘为参照标准，以实际出货包装为准，如有特需要求可以定制。 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. 深圳市深广电子科技有限公司 Shenzhen Shenguang Electronic Technology Co.,LTD Sample Test Data 客户 硕宇 客户编号 日期 2019-9-19 文件编号 SG2019032501 产品编号 00080500001 产品规格 5.0*5.3*1.0 版本 0A 页码 测试项 目 特性测试 尺寸测量 Ls Q DCR A B C D E F G 规格标 准 6.3- 6.9uh ≥90 ≤45 50±0.5 43.5±1 20.5±0.5 5± 0.5 8±1 3±1 2.6Max 单位 uH mΩ MM 测试条 件 LCR(测试仪 100KHZ/1.0V) Digital Caliper TEST DATA No1. 6.709 129.9 36.18 49.84 42.71 20.53 4.68 8.77 3.47 2.55 No2. 6.584 131.7 35.86 49.86 42.77 20.43 5.19 8.94 3.48 2.57 No3. 6.547 133.6 35.99 49.96 42.64 20.46 4.71 8.92 3.49 2.52 No4. 6.561 141.3 36.08 49.88 42.71 20.62 5.11 8.97 3.47 2.54 No5. 6.580 136.5 35.79 49.90 42.47 20.54 4.74 8.94 3.48 2.43 No6. No7. 判定结 果 OK OK OK OK OK OK OK OK OK OK 备注： Approval Drawn Checked Approved Customer Approval 段家旺 谢良 谢小仔

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86…

Text truncated - open the document above for the full version.