2ATLB-SY-W0290UV Disinfection Lamp Alarm Clock Wireless Charger

UV Disinfection Lamp Clock Wireless Charger Model: SY-W0290 I. FunctionButtons II. Functions A. Power Connection 1. Plug the USB-A end of cable into the power adapter while plug Type-C end into the product. 2. The product will be ready and stand by after all indicators are on. B. Wireless Charging 1. Output: 10W 2. Indicator Display: Power connection successful – blue light flashes once Standby – light off Charging – blue light on Charged – light off FOD – blue light flashes continuously C. Alarm Clock Functions 1. Four Buttons: Alarm, +, -, Light. 2. Time System Setting: Double click Alarm button to setup 12-hour time system and 24-hour time system. AM and PM will display while 12-hour time system is set. 3. Time Setting: 1) Click Alarm button once to enter minute setting, adjust value with +/-; 2) Click Alarm button once after minute setting, to enter hour setting, adjust value with +/-; 3) Click Alarm button a third time to finish time setting. 4. Alarm Setting: 1) Press “+” 3 seconds to activate or deactivate Alarm 1; Press “-” 3 seconds to activate or deactivate Alarm 2. Alarm indicator is on while Alarm is activated; 2) While activated, press Alarm button 3 seconds to enter alarm minute setting, adjust value with +/-; 3) Click Alarm button once after alarm minute setting, to enter alarm hour setting, adjust value with +/-; 4) Click Alarm button a third time to finish alarm time setting; 5) Alarm bell rings 3 minutes before automatic switch-off while no any operation. 6) Touch any button to enter Sleepy Mode when bell rings. Bell will rings for 3 more times after 5 minutes. The indicator flashes and Alarm button is out of function during the Sleepy Mode. If time setting is needed, please long press “+” to stop alarm 1 or long press “-” to stop alarm 2. All buttons will function normally; 7) Time display brightness is automatically adjusted by 3 grades. Max brightness during 7am-5:59pm. Mid brightness during 6pm to 12am. Min brightness during 12am-6:59am; 8) Time display brightness can also be adjusted manually to 3 grades (Min/Mid/Max). “+” and “-” can be used to adjust display brightness manually. The default grade is max brightness when power is connected. Single click “-” to dark the display one grade. The display brightness goes dark for the last grade and goes bright automatically 7am next day. All manual adjustment will be synchronized to automatic adjustment. 5.UV Disinfection Lamp Setting: 1) Click the “LAMP” button once to turn on or off the UV disinfection lamp. 2) Click to turn on the UV lamp, the alarm will sound for 5 seconds after the UV lamp counts down for 1 minute; 3) Press and hold “LAMP” button for 3 seconds to turn on the UV disinfection lamp, the UV lamp will work continuously; 4) Support the function of Hall element: when the clock body and the base magnet are closed, the UV lamp works; when the clock body and the base magnet are separated, regardless of whether the disinfection command is completed, the UV lamp needs to stop working immediately, the countdown ends and the light indicator turns off; 5) Anti-mistouch “Setup” button design: when the clock body and the base magnet are separated, all the buttons have no setup function in the first 30 seconds, and the function is restored after 30 seconds; when the clock body and the base magnet are closed, other buttons except the "Lamp" button do not function for 3 seconds, and the function is restored after 3 seconds. 6.Eco-power function: 1) Button cell inside is only for time keeping. 2) All functions are out during power disconnection. Functions restored when power is connected. D. Note 1. Attention: In order to function alarm, wireless charging, night light and USB output all together, power shall be connected by a QC2.0 or QC3.0 adapters. If connected by a 5V adapter, only wireless charging and alarm can work together. 2. Do not squeeze or collide. 3. Do not disassemble or put into the fire, water, to avoid short-circuit leakage. 4. Do not use wireless chargers in severe high temperature, humidity or corrosive environments to avoid leakage of damaged circuits. 5. Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure. 6. Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices. 7. Keep children from the product in case they play the wireless charger as a toy to avoid accidents. 8. Keep the wireless charger and receiver device away from water and other liquids. 9. To clean the charger, make sure the power supply is disconnected. 10. Usage temperature: 0-45°C. 11. Usage humidity: 20-85% (40°C) * Pictures in this manual are all illustration. Final product is subject to fact. * Inside package: alarm charger, charging cable, manual. * power adapter is not included. Please purchase otherwise or use phone original adapter. II. Specification Name：UV Disinfection Lamp Clock Wireless Charger Model: SY-W0290 Input: 5V/2.65A（MAX）, 9V/2.5A（MAX） Output power: 5W/7.5W/10W (MAX) Charging efficiency: 73% Charging distance: ≤8mm Frequency: 111.06kHz to 171.96 kHz Size: 145x116x73mm IV. Applicable Devices Products qualified with Qi standard. V. FCC warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generat…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 External Photos for SZEM2004003253CR FCC ID:2ATLB-SY-W0290 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

Input: 5V Wireless Output: 10W/7.5W/5W USB Output: 5V 1A(MAX) Made in China Mo d e l: SY- W 0 2 9 0 UV wavelength275-280nm Name:UV Disinfection Lamp Clock Wireless Charger 2.65AMAX 9V 2.5 A MAX FCC warningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID2ATLB-SY-W0290 44mm 12.1mm

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 5 Internal Photos for SZEM2004003253CR FCC ID: 2ATLB-SY-W0290 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 5 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 1 of 9 Keny Xu EMC Laboratory Manager 1 COVER PAGE Human Exposure Report Application No.: SZEM2004003253CR Applicant: Shenzhen Shuo Yu Technology co.,LTD Address of Applicant: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Manufacturer: Shenzhen Shuo Yu Technology co.,LTD Address of Manufacturer: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Factory: Shenzhen Shuo Yu Technology co.,LTD Address of Factory: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: UV Disinfection Lamp Alarm Clock Wireless Charger Model No.: SY-W0290, SY-W0290-1 ♣ ♣ Please refer to section 3.1 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Pointuch FCC ID: 2ATLB-SY-W0290 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 Date of Receipt: 2020-04-29 Date of Test: 2020-05-06 to 2020-05-26 Date of Issue: 2020-05-27 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2020-05-27 Original Authorized for issue by: Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 3 of 9 2 Contents 1 COVER PAGE .................................................................................................................................................. 1 2 CONTENTS ....................................................................................................................................................... 3 3 GENERAL INFORMATION ............................................................................................................................. 4 3.1 DETAILS OF E.U.T. .......................................................................................................................................... 4 3.2 DESCRIPTION OF SUPPORT UNITS...................................................................................................................... 6 3.3 TEST LOCATION ............................................................................................................................................... 6 3.4 TEST FACILITY ................................................................................................................................................ 6 3.5 DEVIATION FROM STANDARDS ......................................................................................................................... 7 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ............................................................................................... 7 4 EQUIPMENTS USED DURING TEST ............................................................................................................ 7 5 TEST RESULTS ............................................................................................................................................... 8 5.1 RF EXPOSURE TEST.......................................................................................................................................... 8 5.1.1 E.U.T. Operation.................................................................................................................................. 8 5.1.2 Measurement Data ............................................................................................................................ 9 6 PHOTOGRAPHS .............................................................................................................................................. 9 6.1 TEST SETUP PHOTOS ......................................................................................................................................... 9 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 4 of 9 3 General Information 3.1 Details of E.U.T. Power Supply: 3V DC (1 x 3V "CR2032" Button cell) for clock Back-up Input: Type-C Port DC 5V/2.65A(MAX), 9V2.5A(MAX) Output: USB Port: DC 5V/1A(MAX) WPC: 5W(DC 5V/1A); 7.5W(DC 5V/1.5A); 10W(DC 9V/1.1A) Cable: Type C cable: 100cm unshielded Operation Frequency: 111.06kHz to 171.96kHz Modulation Type: Load modulation Antenna Type: Loop antenna Remark: This device has been tested the worst status of full load and the device has been tested with load at 5W,7.5W and 10W, the worst case 10W(9V/1.1A) is reported only. Remark: Model No.: SY-W0290, SY-W0290-1 Only the model SY-W0290 was tested. Since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference as below: Note 1: This circuit is a blue and green light circuit that controls RGB. Models# SY-W0290/ SY- W0290-1 does not use this circuit, so this circuit is non- functioning. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 5 of 9 Note 2： SY-W0290 Lamp Board Picture (with 8pcs SMT component： Q5/Q7/R22/R23/R25/R 26/R13/R14 Note 3: SY-W0290-1 Lamp Board Picture (without 8pcs SMT component: Q5/Q7/R22/R23/R25/R 26/R13/R14 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325303 Page: 6 of 9 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter SAMSUNG EP-TA200 R37J8YA7W71DK3 Dummy Load Client supply N/A N/A iPhone 8 Apple A1863 F4GVQ656JC6D SAMSUNG Galaxy S8 SAMSUNG SM-G9500 R28J9140LPB 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technic…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 1 of 38 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2004003253CR Applicant: Shenzhen Shuo Yu Technology co.,LTD Address of Applicant: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Manufacturer: Shenzhen Shuo Yu Technology co.,LTD Address of Manufacturer: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Factory: Shenzhen Shuo Yu Technology co.,LTD Address of Factory: 30F East Block, Wenhua Building,1027 Shennan East Road, Luohu District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: UV Disinfection Lamp Alarm Clock Wireless Charger Model No.: SY-W0290, SY-W0290-1 ♣ ♣ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. FCC ID: 2ATLB-SY-W0290 Trade Mark: Pointuch Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2020-04-29 Date of Test: 2020-05-06 to 2020-05-26 Date of Issue: 2020-05-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 2 of 38 Revision Record Version Chapter Date Modifier Remark 01 2020-05-27 Original Authorized for issue by: Leo Li /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 3 of 38 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark: Model No.: SY-W0290, SY-W0290-1 Only the model SY-W0290 was tested fully. and the model SY-W0290-1 was performed the Radiated emissions and Conducted Emissions for discrepancy. Since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference as below: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 4 of 38 Note 1: This circuit is a blue and green light circuit that controls RGB. Models# SY-W0290/ SY- W0290-1 does not use this circuit, so this circuit is non- functioning. Note 2： SY-W0290 Lamp Board Picture (with 8pcs SMT component： Q5/Q7/R22/R23/R25/R 26/R13/R14 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 5 of 38 Note 3: SY-W0290-1 Lamp Board Picture (without 8pcs SMT component: Q5/Q7/R22/R23/R25/R 26/R13/R14 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400325302 Page: 6 of 38 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 6 4 GENERAL INFORMATION .................................................................................................................. 8 4.1 DETAILS OF E.U.T. ......................................................................................................................... 8 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 8 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 8 4.4 TEST LOCATION ............................................................................................................................. 9 4.5 TEST FACILITY ............................................................................................................................... 9 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 9 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 9 5 EQUIPMENT LIST ..............................................................................................................................10 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................12 6.1 ANTENNA REQUIREMENT ................................................................................................................12 6.1.1 Test Requirement: ..................................................................................................................12 6.1.2 Conclusion ..............................................................................................................................12 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................13 7.1 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 6 RF exposure setup for SZEM2004003253CR FCC ID: 2ATLB-SY-W0290 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 6 1.1 Test photos Test with dummy load with 15cm measurement distance Side 1 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 6 Side 2 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 6 Side 3 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 5 of 6 Side 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 6 of 6 Top

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2004003253CR FCC ID: 2ATLB-SY-W0290 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.2 Radiated Emissions (9kHz-30MHz) Test Setup 1.3 Radiated Emissions (30MHz-1GHz) Test Setup