2AU8HSRP6205G IP67 Ruggedized Router

Labeling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modification warning.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compli- ance. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for expo- sure to radio waves established by the Federal Communications Commission (USA). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause unde- sired operation. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. Use a cross screwdriver to remove the SIM card cover. Slide the SIM cards into the SIM slots until they click into place. By default, the SIM card in slot 1 (the upper slot) is the Primary SIM card. When the SRP router is powered on or rebooted, it automatically connects to the network associated with the Primary SIM card. Re-attach the cover. SRP620 Series Quick Start Guide Welcome to the SRP Series SRP series ruggedized outdoor router provides 5G NR service in a ruggedized form factor. With an operating temperature range of -40°C ~ 70°C endurance, they offer industrial-grade environmental qualifications while providing higher speed data services for video and other bandwidth-intensive applications. SRP series industrial router has very strong anti-vibration abili- ty and it is qualified for extreme industrial environments and ideally suited for rail, transportation, mining, oil and gas, man- ufacturing, and other outdoor applications. With the diverse self-developed 5G NR embedded modules integrated, SRP series industrial router can support multi-band for Private 5G NR, even support uncommon frequencies. SRP series industrial router can provide accurate real-time location information. This document will serve as a quick start guide for SRP series ruggedized outdoor router. In this document, the SRP series ruggedized outdoor router will be replaced by the router. Device Architecture The reset button is beside SIM interface, if press 1s, router will restart; If press on for 10s, the router will reset to factory defaults. There are two white ground screws also at behind of device. Note1 Step1 Step2 Step3 Note2 RS232/485 Cable Definition LAN/WAN Cable Definition Power Cable Definition RS232/485 cable definition NumberColorsRS485RS232+DIDO 8BrownRS485_ARS232_RX 7RS232_TXRS485_BBrown&white 6RS_GNDRS_GNDGreen 5RS_GNDRS_GNDBlue&white 4 DI1 RS_GNDBlue 3DO1RS_GNDGreen&white 2DI2NCOrange 1DO2NCOrange&white LAN/WAN cable definition NumberColorsLAN/WAN 8Brown 7Brown&white 6Green 5Blue&white 4Blue 3Green&white 2Orange 1MDI0+/RJ45-1 MDI0-/RJ45-2 MDI1+/RJ45-3 MDI2+/RJ45-4 MDI2-/RJ45-5 MDI1-/RJ45-6 MDI3+/RJ45-7 MDI3-/RJ45-8 Orange&white Working Environment Power Supply9 ~ 36VDC Power Consumption Water and Dustproof 20W IP67 Operating Temperature Storage Temperature Humidity -40°C ~ 70°C -40°C ~ 85°C 5% ~ 95% Packing List A-Code cable to RJ45 jack ADC2 (Ethernet cable) ItemsAccessoriesQty A-Code 8-Pin cable ADB1 (Data cable) A-Code 4-Pin cable M12A (Power cable) Mounting bolt Grounding cable Protective cap (TNC) Protective cap (M12) 1 2 3 4 5 6 7 1 1 1 4 1 5 6 Hardware Configuration Install SIM Cards Connect and Turn on the Router 2.Connect the WIFI1 and WIFI2 antennas if applicable. 3. Connect the ANT1, ANT2, ANT3 and ANT4 5G NR antennas. (It is recommended to have all connected) 5.Connect a computer to the router with an Ethernet cable. 7.Connect 9-36 VDC power cable. 6.Connect devices to the RS232/RS485/DIDO ports. Connect to the Network Once the router’s radio module is configured for the SIM card, it begins the activation/provisioning process and attempts to connect to the mo…

Text truncated - open the document above for the full version.

SmawaveTechnologyCo.,Ltd POWEROFATTORNEY DATE:March7,2022 To: FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 We,theundersigned,herebyauthorizeTATechnology(Shanghai)Co.,Ltd./zhaojunlinonour behalf,toapplytoFCConourequipmentforFCCID:2AU8HSRP620.Anyandallactscarriedout byTATechnology(Shanghai)Co.,Ltd.onourbehalfshallhavethesameeffectasactsofourown forthiscertificate. Sincerely, Signature: Name(inprint):LevenLiang Company:SmawaveTechnologyCo.,Ltd Adreess:3FBuilding81001NorthQinzhouRoadXuhuiDistrictShanghaiChina

C5266091_X8_Ed.1 1/1 Letter of Authorization Smawave Technology Co. ,Ltd Company: Smawave Technology Co. ,Ltd Address: 3F Building 8 1001 North Qinzhou Road Xuhui District, Shanghai, China Product Name: 5G IP67 Ruggedized Router Model Number: SRP620 FCC Identifier: 2AU8HSRP620 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: leven.liang Date: 2022/3/15 Title: Manager Signature of applicant:

SmawaveTechnologyCo.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Subject;RequestforLongTermConfidentiality FCCID:2AU8HSRP620 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,weare requestingtheCommissiontowithholdthefollowingattachment(s)asconfidentialdocumentsfrom publicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityDescription UNIIdeclarationletter Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatandcorrespondence duringthecertificationreviewprocesscannotbegrantedasconfidentialdocumentsandthis informationwillbeavailableforpublicreviewoncethegrantofequipmentauthorizationisissued. Sincerely, Date:2022-3-4 Signature: Name(inprint):LevenLiang Company:SmawaveTechnologyCo.,Ltd Adreess:3FBuilding81001NorthQinzhouRoadXuhuiDistrictShanghaiChina

Company:SmawaveTechnologyCo.,Ltd Date:2022/3/5 DTS-UNIIDeclarationLetter Towhomitmayconcern WehavedeclaredbelowfeaturedforFCCequipmentauthorization. DeviceFCCID:2AU8HSRP620 1.Active/PassiveScanning,adHocmodeaccesspointcapability 2412-2462MHz 区 yes 口 No 区 yes 口 No 口 yes 区 No 区 yes 口 No 5150-5250MHz 口 yes 区 No 区 yes 口 No 口 yes 区 No 口 yes 区 No 5725-5825MHz 口 yes 区 No 区 yes 口 No 口 yes 区 No 口 yes 区 No MeetFCCpart15.202/RSS-247,Issue2,Section6.4a)requirement-区Yes,口No plscheckbelow： 区Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilityto transmitwithoutreceivinganenablingsignal.Inthismodeisabletoselectachannelandinitiate anetworkbysendingenablingsignalstootherdevices 口Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthe deviceareundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork.... Sincerely, Signature: Name(inprint):LevenLiang Company:SmawaveTechnologyCo.,Ltd Adreess:3FBuilding81001NorthQinzhouRoadXuhuiDistrictShanghai China

E TA Techno This report sh EUT Ap EUT Appearanc ology (Shang hall not be repr ppearanc ce ghai) Co., L roduced except ce td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 01A0113 age 1 of 3 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 01A0113 age 2 of 3 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without Picture 1: t the written ap : Constituen pproval of TA Te ts of EUT Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 01A0113 age 3 of 3

TA Techno This report sh Part 15 RF Test Setup ology (Shang hall not be repr 5E Test S p ghai) Co., Lt roduced except Setup td. tin full, without 9 3 TA-MB- t the written ap 9kHz-30MHz 30MHz-1GH -04-005R pproval of TA Te z z Rep echnology (Shan port No.: R2201 Pa nghai) Co., Ltd. 1A0113 age 1 of 3 TA Techno This report sh RF Test Setup ology (Shang hall not be repr p ghai) Co., Lt roduced except td. tin full, without 1 18G TA-MB- t the written ap GHz-18GH GHz - 26.5G -04-005R pproval of TA Te z GHz Rep echnology (Shan port No.: R2201 Pa nghai) Co., Ltd. 1A0113 age 2 of 3 TA Techno This report sh RF Test Setup ology (Shang hall not be repr p ghai) Co., Lt roduced except Pict Pictu td. tin full, without 26. ture 1 Radia ure 2 Condu TA-MB- t the written ap .5GHz -40G ated Emiss ucted Emiss -04-005R pproval of TA Te GHz ion Test S e sion Test S Rep echnology (Shan etup Setup port No.: R2201 Pa nghai) Co., Ltd. 1A0113 age 3 of 3