2AU8HSRW310Outdoor CPE

LTE CPE SRW310 Router Quick Start Guide Introduction SRW310 is a highly advanced LTE outdoor multi-service product solution specifically designed to meet integrated data needs for residential, business and enterprise users. The product supports advanced Gigabit networking functionalities. It enables wide service coverage and provides high data throughput and networking features to customers who needs easy broadband access. Panel of device 1 · I/O panel of ODU · Packing List Make sure you have everything you need to properly configure the device. ODUPoEEthernet cablePower supply Stainless steel clamp Cable glandsSlotted end cap 2 How does it work 1. Connect Power Adapter to PoE injector. 2. PoE injector provide the power to ODU via LAN cable. 3 PC connect LAN Cable to PoE, then PC can surf the Internet when ODU access the LTE network. This quick installation guide shows you how to configure your ODU in order to access the Internet. Configure hardware Please make sure that you are familiar with all accident prevention and safety procedures necessary for working at height and with electricity before start to intall the device. DO NOT install the ODU during a lightning storm. CAUTION Insert a SIM Card to the Slot Make sure the ODU is turned off before you insert your SIM card. It is recommended to NOT connect the PoE cable when you do this step. Otherwise, the SIM card may be damaged. CAUTION 3 Step 1 CAT5e cable to thread through the cable glands. Step 2 Connect the end of the CAT5e Ethernet cable to the PoE port of the ODU. Step 3 Wring the cable glands into ODU and seal tightly. NOTE: Make sure you have inserted the SIM card into the ODU. Mount the ODU See the installation instructions to mount the ODU correctly. Header Connection 4 Mounting Bracket The ODU can be mounted on an antenna pole or mast or on a wall using the supplied mounting bracket. · Choose a mounting point that is sturdy enough to hold the ODU, even during high winds. · When choosing a location to install the ODU, please be noted that the ODU’s front panel should point towards your service provider’s nearest base station. You do not need to be able to see the base station from the ODU’s position. However, if you experience difficulties with signal reception, a Line of Sight (LoS) connection may produce better results. · It is suggested that you transport the ODU to its intended installation location in its original protective package. To obtain the best radio signal level and connection quality, the CPE antenna should be aimed towards the best eNB or BS directly.To search for the best eNB direction, the user can rotate the CPE slowly and tilte CPE slightly to find the best signal direction. The CPE radio signal strength level can be observed from the RF LEDs mounted on the lower panel as shown below. The more LEDs on, the better the signal strength. Choose Location 5 Connect the PoE Place a CAT5e Ethernet cable (not included) from the location of your intended Router to the desired PC location. If you intend to use cable clamps or other methods to secure the cable, do not tighten them until you finish installing the Router and ODU. ODU Computer PoEAdapter Hardware connections of Router 6 To connect the CAT5e Ethernet cable: Step 1 Connect the CAT5e Ethernet cable to PoE. Do not connect a computer or switch directly to the PoE port due to high PoE power. CAUTION Step 2 Connect the power adapter to the PoE injector. The POWER LED turns on a solid green-yellow once connected. Step 3 Connect the included Ethernet cable from the computer to one of the Router's Ethernet ports. LED Behavior When set up the Outdoor Unit, the LED will have the following behavior. ODU POWER Steady on Off Off Power On No Power Supply INTERNET Steady onInternet Available Internet Unavailable Bliking (500ms interval) Data Transmission Off SIM Steady onSIM ready No SIM detected Bliking (1sec interval) SIM LOCK or PIN/PUK LOCK Yellow GreenSignal stronge Signal good Red Signal week SIGNAL 7 8 Configure the CPE Login to the website Use a browser to access the management web page to configure and manage the CPE. The following procedure describes how to use a computer running Windows 7 or above version and Internet Explorer to connect to the CPE webpage. Step 1 Connect the CPE correctly. step 2 Start Internet Explorer, go to http://192.168.0.1 in the address bar, and press Enter. Step 3 Enter the user name and password, and click Log In. You can connect to the management web page after the password is verified. 9 Configuration of LTE Step 1 Connect the CPE correctly. Step 2 Enter the management website. Step 3 Choose Settings Network LTE Settings. Step 4 Set the connection mode and scan mode. The default setting is automatically connection and full band scanning, if you want to connect the LTE network according to your needs, you can set the connection mode as manual, and simply scan a specified band. 1011 Frequently Asked Questions · Make sure that the CPE is started. · Verify that the CPE is correctly connected to the computer through a network cable. If the problem persists, contact authorized local service suppliers. · Check that the power adapter and PoE have have connected to the CPE properly. · Check that the CPE is placed in an open area that is far away from obstructions, such as concrete or wooden walls. · Check that the CPE is placed far away from household electrical appliances that generate strong electromagnetic field, such as microwave ovens, refrigerators, and satellite dishes. If the problem persists, contact authorized local service suppliers. · The CPE is reheated after being used for long time. Therefore, you must turn off the CPE when not you are using. · Check that the CPE is properly ventilated and protected from direct sunlight. Fails to Log in to the web management page. · Make sure that the power cable is connected to the PoE, and the CPE is connected to the right port of the PoE. · Make sure that the power adapter and PoE are comp…

Text truncated - open the document above for the full version.

ShanghaiSmawaveTechnologyCo.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Subject;RequestforLongTermConfidentiality FCCID:2AU8HSRW310 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,weare requestingtheCommissiontowithholdthefollowingattachment(s)asconfidentialdocumentsfrom publicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityDescription UNIIdeclarationletter Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatandcorrespondence duringthecertificationreviewprocesscannotbegrantedasconfidentialdocumentsandthis informationwillbeavailableforpublicreviewoncethegrantofequipmentauthorizationisissued. Sincerely, Date:2020-5-13 Signature: Name(inprint):wangfei Company:ShanghaiSmawaveTechnologyCo.,Ltd Adreess:3FBuilding81001NorthQinzhouRoadXuhuiDistrictShanghaiChina

ShanghaiSmawaveTechnologyCo.,Ltd POWEROFATTORNEY DATE:May20,2020 To: FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 We,theundersigned,herebyauthorizeTATechnology(Shanghai)Co.,Ltd./zhaojunllinonour behalf,toapplytoFCConourequipmentforFCCID:2AU8HSRW310.Anyandallactscarriedout byTATechnology(Shanghai)Co.,Ltd.onourbehalfshallhavethesameeffectasactsofourown forthiscertificate. Sincerely, Date:2020-5-13 Signature: Name(inprint):wangfei Company:ShanghaiSmawaveTechnologyCo.,Ltd Adreess:3FBuilding81001NorthQinzhouRoadXuhuiDistrictShanghaiChina

EUTAppearanceReportNo.:R2002A0093 TATechnology(Shanghai)Co.,Ltd.Page1of 3 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. EUTAppearance EUTAppearanceReportNo.:R2002A0093 TATechnology(Shanghai)Co.,Ltd.Page2of 3 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. + EUTAppearanceReportNo.:R2002A0093 TATechnology(Shanghai)Co.,Ltd.Page3of 3 Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofTATechnology(Shanghai)Co.,Ltd. a:EUT Picture1:ConstituentsofEUT

EUT Appearance Report No.:R2002A0093 TA Technology (Shanghai) Co., Ltd. Page 1 of 2 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. EUT Appearance EUT Appearance Report No.:R2002A0093 TA Technology (Shanghai) Co., Ltd. Page 2 of 2 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. + a: EUT Picture 1: Constituents of EUT

LabelLocation Company:ShanghaiSmawaveTechnologyCo.,Ltd Model: SRW310

SRW310 Antenna

MPE TEST REPORT Applicant Shanghai Smawave Technology Co. ,Ltd FCC ID 2AU8HSRW310 Product Outdoor CPE Model SRW310 Report No. R2002A0093-M1V1 Issue Date May 20, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 2 of 8 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2. Test facility ............................................................................................................................ 3 1.3 Testing Location ...................................................................................................................... 3 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 4 Test Result ..................................................................................................................................... 7 MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 3 of 8 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2. Test facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA (Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 4 of 8 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 5 of 8 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant Shanghai Smawave Technology Co. ,Ltd Applicant address 3/F, Building 8, 1001 North Qinzhou Road，Xuhui District, Shanghai, China Manufacturer Shanghai Smawave Technology Co. ,Ltd Manufacturer address 3/F, Building 8, 1001 North Qinzhou Road，Xuhui District, Shanghai, China General Technologies Model SRW310 SN 862165040656140 Hardware Version V1.0 Software Version MG6_0.3.2.20 Date of Testing: March 4, 2020 ~ April 16, 2020 Note: 1. The EUT is sent from the applicant to TA and the information of the EUT is declared by the applicant. 2. All indications of Pass/Fail in this report are opinions expressed by TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. Note This revised report (Report No. R2002A0093-M1V1) supersedes and replaces the previously issued report (Report No. R2002A0093-M1). Please discard or destroy the previously issued report and dispose of it accordingly. MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Shanghai) Co., Ltd. TA-MB-01-013S Page 6 of 8 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Band Maximum Conducted Output Power (dBm) Antenna Gain (dBi) Numeric gain (dBm) (mW) LTE Band 48 24.000 251.189 16 39.811 MPE Test Report Report No.: R2002A0093-M1V1 TA Technology (Sha…

Text truncated - open the document above for the full version.

Report No.: RF200304C30 Page No. 1 / 47 Report Format Version: 6.1.1 CBSD Test Report Report No.: RF200304C30 FCC ID: 2AU8HSRW310 Test Model: SRW310 Received Date: Mar. 04, 2020 Test Date: Mar 17 ~ May. 08, 2020 Issued Date: May. 12, 2020 Applicant: Shanghai Smawave Technology Co. ,Ltd Address: 3/F, Building 8, 1001 North Qinzhou Road，Xuhui District, Shanghai, China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF200304C30 Page No. 2 / 47 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 9 2.2 Modification Record ............................................................................................................................ 9 3 General Information ............................................................................................................................ 10 3.1 General Description of EUT .............................................................................................................. 10 3.2 General Description of Applied Standards and References ............................................................... 11 4 Measurement ....................................................................................................................................... 12 4.1 CBSD Measurement ......................................................................................................................... 12 4.2 CBSD Test Procedure ....................................................................................................................... 12 4.3 Duration and Duty Cycle Measurement ............................................................................................ 12 4.4 Duration and Duty Cycle Test Procedure .......................................................................................... 12 4.5 Test Environment .............................................................................................................................. 12 4.6 Test Equipment ................................................................................................................................. 13 4.7 Test Setup ......................................................................................................................................... 13 4.8 Test Results ....................................................................................................................................... 14 4.8.1 CBSD Registration Process .............................................................................................................. 14 4.8.1.1 WINNF.FT.C.REG.1 .................................................................................................................... 14 4.8.1.2 WINNF.FT.C.REG.8 .................................................................................................................... 15 4.8.1.3 WINNF.FT.C.REG.10 .................................................................................................................. 16 4.8.1.4 WINNF.FT.C.REG.12 .................................................................................................................. 17 4.8.1.5 WINNF.FT.C.REG.14 .................................................................................................................. 18 4.8.1.6 WINNF.FT.C.REG.16 .................................................................................................................. 19 4.8.1.7 WINNF.FT.C.REG.18 .................................................................................................................. 20 4.8.2 CBSD Spectrum Grant Process ........................................................................................................ 21 …

Text truncated - open the document above for the full version.

Reference No.: 200304C30 Page No. 1 / 63 Test Logs FCC ID: 2AU8HSRW310 Test Model: SRW310 Received Date: Mar. 04, 2020 Test Date: Mar 17 ~ May. 08, 2020 Issued Date: May. 12, 2020 Applicant: Shanghai Smawave Technology Co. ,Ltd Address: 3/F, Building 8, 1001 North Qinzhou Road，Xuhui District, Shanghai, China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration/ Designation Number: 788550 / TW0003 Reference No.: 200304C30 Page No. 2 / 63 Table of Contents 1 CBSD Registration Process ................................................................................................................. 3 1.1 WINNF.FT.C.REG.1 ......................................................................................................................... 3 1.2 WINNF.FT.C.REG.8 ......................................................................................................................... 4 1.3 WINNF.FT.C.REG.10 ....................................................................................................................... 5 1.4 WINNF.FT.C.REG.12 ....................................................................................................................... 6 1.5 WINNF.FT.C.REG.14 ....................................................................................................................... 7 1.6 WINNF.FT.C.REG.16 ....................................................................................................................... 8 1.7 WINNF.FT.C.REG.18 ....................................................................................................................... 9 1.8 WINNF.FT.C.GRA.1 ....................................................................................................................... 10 1.9 WINNF.FT.C.GRA.2 ........................................................................................................................ 11 2 CBSD Heart Beat Process .................................................................................................................. 12 2.1 WINNF.FT.C.HBT.1 ........................................................................................................................ 12 2.2 WINNF.FT.C.HBT.3 ........................................................................................................................ 16 2.3 WINNF.FT.C.HBT.4 ........................................................................................................................ 19 2.4 WINNF.FT.C.HBT.5 ........................................................................................................................ 23 2.5 WINNF.FT.C.HBT.6 ........................................................................................................................ 25 2.6 WINNF.FT.C.HBT.7 ........................................................................................................................ 28 2.7 WINNF.FT.C.HBT.9 ........................................................................................................................ 31 2.8 WINNF.FT.C.HBT.10 ...................................................................................................................... 35 3 CBSD Measurement Report ............................................................................................................... 40 3.1 WINNF.FT.C.MES.3 ....................................................................................................................... 40 3.2 WINNF.FT.C.MES.4 ....................................................................................................................... 44 4 CBSD Relinquishment Process ......................................................................................................... 49 4.1 WINNF.FT.C.RLQ.1 ....................................................................................................................... 49 5 CBSD Deregistration Process ........................................................................................................... 52 5.1 WINNF.FT.C.DRG.1 ....................................................................................................................... 52 6 CBSD Security Validation .................................................................................................................. 55 6.1 WINNF.FT.C.SCS.1 ....................................................................................................................... 55 6.2 WINNF.FT.C.SCS.2 ....................................................................................................................... 56 6.3 WINNF.FT.C.SCS.3 ....................................................................................................................... 56 6.4 WINNF.FT.C.SCS.4 ....................................................................................................................... 56 6.5 WINNF.FT.C.SCS.5 ....................................................................................................................... 56 6.6 WINNF.PT.C.HBT.1(Max Eirp = 9 dBm/MHz) ................................................................................ 57 6.7 WINNF.PT.C.HBT.1(Max Eirp = 16 dBm/MHz) .............................................................................. 59 6.8 WINNF.PT.C.HBT.1(Max Eirp = 23 dBm/MHz) .............................................................................. 61 Reference No.: 200304C30 Page No. 3 / 63 1 CBSD Registration Process 1.1 WINNF.FT.C.REG.1 2020-05-07T07:19:24.618Z - INFO - WINNF TEST HARNESS RELEASE: 1.0.0.3 - 2018-November-13 2020-05-07T07:19:24.618Z - INFO - the selected test from the user : WINNF.FT.C.REG.1 is starting now 2020-05-07T07:19:52.253…

Text truncated - open the document above for the full version.

RF TEST REPORT Applicant Shanghai Smawave Technology Co. ,Ltd FCC ID 2AU8HSRW310 Product Outdoor CPE Model SRW310 Report No. R2002A0093-R1V 2 Issue Date May 2 8, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2019)/ FCC CFR 47 Part 96E (2019). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 FCC RF Test Report Report No: R2002A0093-R1V2 TA Technology (Shanghai) Co., Ltd. TA-MB-01-042R Page 2 of 70 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENT 1. Test Laboratory ...................................................................................................................................... 4 1.1. Notes of the Test Report ............................................................................................................... 4 1.2. Test facility ..................................................................................................................................... 4 1.3. Testing Location ............................................................................................................................ 4 2. General Description of Equipment under Test ....................................................................................... 5 2.3. Applicant and Manufacturer Information ....................................................................................... 5 2.4. General Information ....................................................................................................................... 5 3. Applied Standards .................................................................................................................................. 6 4. Test Configuration .................................................................................................................................. 7 5. Test Case Results .................................................................................................................................. 8 5.1. RF Power Output ........................................................................................................................... 8 5.2. Maximum Effective Isotropic Radiated Power and Maximum Power Spectral Density .............. 15 5.3. Occupied Bandwidth ................................................................................................................... 31 5.4. Band Edge Compliance ............................................................................................................... 40 5.5. Peak-to-Average Power Ratio (PAPR) ....................................................................................... 50 5.6. Frequency Stability ........…

Text truncated - open the document above for the full version.