2AUIUWLPPO1WIFI OUTDOOR PLUG

Wyze Labs, Inc. Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350 Kirkland, WA 98033 1 Instruction Manual for WLPPO1. Item No. TYPE PHOTO DESCRIPTION WLPPO1 WiFi Outdoor Plug Input: 120V~,60Hz Output: Max.15A Resistive Load Max. 1000W Tungsten Lamp Max. 1/2 HP Rainproof Operation Temperature: -4°F~120°F (-20°C~50°C) FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 AC Adaptor Input: 120V~，60Hz 2 outlets Output: Maximum 1875W for Resistive load 1) Download apps: IOS version please search and download Wyze app at app-store, Android version please search and download Wyze app from Google Play. Or you may also scan below QR code to download. 2) Operation plug-in adaptor into wall outlet or movable socket-outlets, Press can cause it to sink into the tabletop. 3) Operation 3.1) Operation on/off by manual - Press push- button ON to switch on if current mode is OFF. Wyze Labs, Inc. Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350 Kirkland, WA 98033 2 - Press push-button OFF to switch off if current mode is ON 3.2) Operation on/off by Apps Pairing a) Please hold press button more than 5 seconds till red indicator lighting flash quickly.,then release the button, you could add your electronic device into your APP now. Please reference the “QUICK START GUIDE” to learn details. b) The blue indicator light, pairing is succeed, then could control your device via APPS. c) When the red light is not lit or the blue light is not flashing, hold press button more than 10 seconds, the blue indicator will flash quickly, then release the button, red indicator flash quickly, means reset succeed, then you could pairing again. 3.3) Indicator status of Gateway 4) Fault finding a）No activation: - Check setting program successful - Check wifi router connection b）No response - -Check if the socket has electricity, try changing it to another place - -Try changing a device 5) Important Notes a) DO NOT OVERLOAD. b) To install the product needed by a qualified electrician. 6) Direction! - Installation must be done by people having knowledge and experience in electrical connections - Improper installation can cause danger for your own life the life of everyone using the electrial appliance - Improper installation can cause damage of property e.g. fire - You are personally liable for damage of property or humans LED Indicator Colour indicator status 1 No flash 2 Flash 3 Keep lighting Flash slowly Flash quickly A blue Failed to connect to network Press and hold for 3 seconds to enter the distribution network After pressing the butoon for 10 seconds ,enter reset ststus Connect to network success B White Power off Power on Wyze Labs, Inc. Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350 Kirkland, WA 98033 3 7) Warning! For your safety, please read the following cautions before installing or using your device. - Do not open the device or attempt to repair or service it. - Use the device in a dry location, and avoid placing it in a humid environment. - Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Wyze Labs, Inc. Wyze Labs. Inc. 3933 Lake Washington Blvd NE, Suite 350 Kirkland, WA 98033 4 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Wyze Labs, Inc. 3933 Lake Washington Blvd NE, Suite 350，Kirkland, WA 98033 Declaration Letter We Wyze Labs, Inc. hereby declare that the product WIFI OUTDOOR PLUG, Model WLPPO1 with WIFI module is not capable of operating with channel 12 and 13 in regions of US and Canada. Versions of the product available for import and sale in the US and Canada will not operate on channels 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. By: Dongsheng Song (Signature1) (Print name) Title: Chief Product Officer Time：2020-10-30 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

WyzeLabs,Inc. WyzeLabs.Inc.3933LakeWashingtonBlvdNE,Suite350 Kirkland,WA98033 AuthoritytoActasAgent Date:October10,2020 AmericanCertificationBody,Inc. 6731WhittierAvenue SuiteC110 McLean,VA22101 ToWhomItMayConcern: IntertekShanghaiisauthorizedtoactonourbehalf,untilotherwisenotified,forapplicationsto AmericanCertificationBody,Inc.(ACB). Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits,pursuantto Section5301oftheAnti-DrugAbuseActof1988,21U.S.C.862.Further,noparty,asdefinedin47 CFR1.2002(b),totheapplicationissubjecttodenialoffederalbenefits,thatincludesFCCbenefits. WealsodeclarethattheinformationprovidedtotheFCCistrueandcorrecttothebestofour knowledge(47CFR2.911(d))andwehavebeeninformedofthegranteeresponsibilities(47CFR 2.909)withregardtocertifiedequipment. Thankyou, AgencyAgreementExpirationDate:March30,2021 By:______________________________DongshengSong__________ (Signature 1 )(Printname) Title:___Chiefproductofficer________ Onbehalfof:WyzeLabs,Inc.________ (CompanyName) Telephone:__+1517-614-1124___________ 1 -MustbesignedbyapplicantcontactgivenforapplicantontheFCCsite,orbytheauthorizedagentifanappropriate authorizedagentletterhasbeenprovided.Lettersshouldbeplacedonappropriateletterhead.

FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 1 of 3 External Picture FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 2 of 3 FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 3 of 3

Label & Label Location

FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 1 of 5 Internal Picture FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 2 of 5 FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 3 of 5 FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 4 of 5 FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Page 5 of 5

Wyze Labs, Inc. MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: WLPPO1 REPORT NUMBER: 200800345SHA-002 ISSUE DATE: Sep 22, 2020 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 8 Report no.: 200800345SHA-002 Applicant: Wyze Labs, Inc. 3933 Lake Washington Blvd NE, Suite 350，Kirkland, WA 98033 Manufacturer: Wyze Labs, Inc. 3933 Lake Washington Blvd NE, Suite 350，Kirkland, WA 98033 Manufacturing site: Ningbo Comen Electronics Technology Co., Ltd. No.599 Jinda Road, Zhenhai Economic Development Zone 315221 Ningbo,China FCC ID: 2AUIUWLPPO1 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Stephanie Zhang Reviewer Wakeyou Wang Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 8 Revision History Report No. Version Description Issued Date 200800345SHA-002 Rev. 01 Initial issue of report Sep 22, 2020 Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 8 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: WIFI OUTDOOR PLUG Type/Model: WLPPO1 Description of EUT: It is a plug with wifi function,there is one model only. Rating: Input: 120VAC,60Hz; Output:120VAC,15A MAX Category of EUT: Class B EUT type: Table top Floor standing Software Version: 1.0.0.12 Hardware Version: V2 Sample received date: 09/02/2020 Date of test: 09/02/2020 ~ 09/20/2020 1.2 Technical Specification Frequency Range: 2412MHz ~ 2462MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20 Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n-HT20: OFDM (64-QAM, 16-QAM, QPSK, BPSK) Channel Number: 11 Channels for 802.11b, 802.11g and 802.11n(HT20) Data Rate: IEEE 802.11b: Up to 11 Mbps IEEE 802.11g: Up to 54 Mbps IEEE 802.11n-HT20: Up to MCS7 Channel Separation: 5 MHz Antenna Information: 2.5dBi, PIFA antenna Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 8 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab Registration code No.: 2042B-1 VCCI Registration Lab Registration No.: R-4243, G-845, C-4723, T-2252 NVLAP Accreditation Lab NVLAP LAB CODE: 200849-0 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 8 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 8 2.2 Assessment Results Power density (S) is calculated according to the formula: S = P / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 200800345SHA-001: The maximum radiated power = 18.65dBm = 73.28mW; Here R is chosen to be 20cm, S = P / (4πR²) = 73.28/ (4 * 3.14 * 20 * 20) = 0.0146 mW/cm² < 1 mW/cm² Report No.: 200800345SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 8 of 8 Appendix I Definition below must be outlined in the User Manual: To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. ******************************************* END ************************************

Wyze Labs, Inc. RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: WLPPO1 REPORT NUMBER: 200800345SHA-001 ISSUE DATE: Sep 22, 2020 DOCUMENT CONTROL NUMBER: TTRF15.247-03_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-03_V1 © 2018 Intertek Page 2 of 57 Report no.: 200800345SHA-001 Applicant: Wyze Labs, Inc. 3933 Lake Washington Blvd NE, Suite 350，Kirkland, WA 98033 Manufacturer: Wyze Labs, Inc. 3933 Lake Washington Blvd NE, Suite 350，Kirkland, WA 98033 Manufacturing site: Ningbo Comen Electronics Technology Co., Ltd. No.599 Jinda Road, Zhenhai Economic Development Zone 315221 Ningbo,China FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2019): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (April 2018): General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Stephanie Zhang Reviewer Wakeyou Wang Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 3 of 57 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 ANTENNA INFORMATION....................................................................................................................................... 8 1.4 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 9 2 TEST SPECIFICATIONS ................................................................................................................................. 10 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................. 10 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................. 10 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 12 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 12 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 12 2.6 INSTRUMENT LIST .............................................................................................................................................. 13 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 14 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 15 3.1 LIMIT .............................................................................................................................................................. 15 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 15 3.3 TEST CONFIGURATION ........................................................................................................................................ 15 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ....................................................................................................... 15 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 16 4.1 LIMIT .............................................................................................................................................................. 16 4.2 MEASUREMENT PROCEDURE .............................................................................…

Text truncated - open the document above for the full version.

Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 50 of 57 802.11b,2412MHz,Ant0,Plot 1,Reference Level 802.11b,2412MHz,Ant0,Plot 2,Band Edge 802.11b,2412MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2412MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2412MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11b,2412MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11b,2437MHz,Ant0,Plot 1,Reference Level 802.11b,2437MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 51 of 57 802.11b,2437MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2437MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2437MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11b,2437MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11b,2462MHz,Ant0,Plot 1,Reference Level 802.11b,2462MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 52 of 57 802.11b,2462MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11b,2462MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11b,2462MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11b,2462MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11g,2412MHz,Ant0,Plot 1,Reference Level 802.11g,2412MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 53 of 57 802.11g,2412MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2412MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2412MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11g,2412MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11g,2437MHz,Ant0,Plot 1,Reference Level 802.11g,2437MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 54 of 57 802.11g,2437MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2437MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2437MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11g,2437MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11g,2462MHz,Ant0,Plot 1,Reference Level 802.11g,2462MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 55 of 57 802.11g,2462MHz,Ant0,Plot 3,30MHz~231 0MHz 802.11g,2462MHz,Ant0,Plot 4,2500MHz~5 000MHz 802.11g,2462MHz,Ant0,Plot 5,5000MHz~1 5000MHz 802.11g,2462MHz,Ant0,Plot 6,15000MHz~ 25000MHz 802.11n(HT20),2412MHz,Ant0,Plot 1,Reference Level 802.11n(HT20),2412MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 56 of 57 802.11n(HT20),2412MHz,Ant0,Plot 3,30MHz~2310MHz 802.11n(HT20),2412MHz,Ant0,Plot 4,2500MHz~5000MHz 802.11n(HT20),2412MHz,Ant0,Plot 5,5000MHz~15000MHz 802.11n(HT20),2412MHz,Ant0,Plot 6,15000MHz~25000MHz 802.11n(HT20),2462MHz,Ant0,Plot 1,Reference Level 802.11n(HT20),2462MHz,Ant0,Plot 2,Band Edge Report No.: 200800345SHA-001 TEST REPORT TTRF15.247-03_V1 © 2018 Intertek Page 57 of 57 802.11n(HT20),2462MHz,Ant0,Plot 3,30MHz~2310MHz 802.11n(HT20),2462MHz,Ant0,Plot 4,2500MHz~5000MHz 802.11n(HT20),2462MHz,Ant0,Plot 5,5000MHz~15000MHz 802.11n(HT20),2462MHz,Ant0,Plot 6,15000MHz~25000MHz ******************************************* END ************************************

FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Test Setup Radiated emission 30M-1G FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 1G-25G FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 Conducted emission FCC ID: 2AUIUWLPPO1 IC: 25466-WLPPO1 RF Conducted power test measurement