2AUTE-2ZK25HPortable Photo Printer

As shown in the figure, insert the lower end of the top cover into the groove at the bo�om of the printer in the direc�on of the arrow and press it down, assemble the top cover. Press down with your fingers on the protruding posi�on at the bo�om of the top cover, the front end of the cover will pop open. As shown in the diagram, directly remove the top cover from the front end. Set up the printer to automa�cally open the APP when touching the phone Type-C Port OFF: Power-off ON: Standby Slow Flash: Charging 01 02 03 ON: Error (Paper jam/Out of paper/Cover opened) Fast FlashOvertemperature Slow Flash: Low power Fast FlashPrin�ng Status Alterna�ng Flash Fireware is upda�ng When touching the phone, open the APP. A�er connec�ng the printer and mobile phone, click on “Device Management” in the "HeyPhoto" APP. Click on “Open APP when touching the phone” and follow the APP instruc�ons to complete the shortcut command se�ngs. MT56i RESET Bu�on Appearance and Components Note: The items in the package are actually based on the order. Power Bu�on Accessories USB Type-C Cable Photo Paper (5pcs)+Blue Smart Sheet (1pcs) Quick Start Guide LED Indicator Status Red LED Red Blue LED Blue LED Error Status Basic Status When red LED stays on, you can check the detailed error condi�on on APP a�er connec�ng the printer with phone. Steps & Notes Paper Loading Precau�ons for Photo Paper The photo paper is easy to get damp, please use it as soon as possible a�er opening. Avoid excessive direct sunlight and over low temperature. Avoid device damage caused by using non-special paper. Do not fold or damage the paper. The blue smart sheet is used for color calibra�on and TPH cleaning. When prin�ng a�er loading 1 packet of paper for the first �me, the blue smart sheet will be automa�cally out firstly, and then the photo will be printed out. HeyPhoto App Hold down the power bu�on for 3 seconds, the printer will be turned on. Scan the QR code to download the "HeyPhoto" APP. How to Print Steps & Notes In the app, select the photos you want to print. You can also edit the photos as needed before prin�ng. Tumn on your phone's Bluetoothopen APP, click “Add Device”,search for“MT56i-XXXX" and click to connect. 1. If Bluetooth has been disconnected for 5 seconds, the printer will enter sleeping mode, press the power bu�on to awaken it. 2. In sleeping mode, if not awakened the printer within 5 minutes, it will be off automa�cally. 3. When using it for the second �me, just click the print icon that the printer will be connected automa�cally and transfer data to print. 4. Do not touch the photo paper during prin�ng, or else it may result in stripes on photo paper. Blue Smart Sheet The text side of all the photo paper should face down Take out one packet of photo paper (including 5pcs or 10pcs of photo paper and 1pc of blue smart sheet), and place them into the printer as shown on Figure 2. The photo paper should be placed a�er the blue smart sheet and its text side should face down. Please note that never place more than 11pcs of photo paper (including 1pc blue smart sheet), and use the photo paper specially for the printer, use other brands of that may affect the print quality. Paper Ejec�on Slot Model: HCP-2ZK25H Download the HeyPhoto APP Precau�ons for Prin�ng Before pu�ng the photo paper into the printer, do not touch the prin�ng surface of the photo paper with your hands to ensure that the prin�ng surface is free of dirt and dust par�cles, otherwise the print quality will be affected. It is not allowed to con�nuously print more than 10 sheets, or else it may cause print head dust accumula�on, which needs to be cleaned by the blue smart sheet again. A�er prin�ng 3 sheets con�nuously, the printer may have overheat protec�on for the print head, and the prin�ng will be suspended forcibly, which is a normal phenomenon. It can be printed again a�er cooling the print head. Ba�ery Charging When the ba�ery power is low, the LED indicator will turn red and flash slowly. Please charge it by the supplied USB cable in �me. If you con�nue prin�ng, it may power off arbitrarily. To charge, insert one end of the USB cable into the printer and the other end to the AC adapter or PC. When connected, the LED indicator will turn blue and flash slowly to indicate charging. It takes about 60 to 90 minutes for fully charge. A�er that, the blue LED indicator will be ligh�ng all the way. 1. The printer can be charged via computer USB port or AC adapter. Please note that the AC adapter is not supplied. 2. If charging via AC adapter, connect the USB cable to a power source of supplying DC 5V/2A. Charge via PC Charge via AC Adapter Vary by country or region ManufacturerXiamen Hanin Co.,Ltd. Factory AddressNo.96, RongYuan Road, Tong'an District, Xiamen City, Fujian Province, P.R. China E-mail: [email protected] Web: www.hprt.com MADE IN CHINA Portable Photo Printer iPhone 16e, iPhone 16 Pro Max, iPhone 16 Pro, iPhone 16 Plus, iPhone 16, iPhone 15 Pro Max, iPhone 15 Pro, iPhone 15 Plus, iPhone 15, iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (3rd genera�on), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd genera�on), iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Air 13-inch (M3), iPad Air 11-inch (M3), iPad (A16), iPad mini (A17 Pro), iPad Pro 13-inch (M4), iPad Pro 11-inch (M4), iPad Air 13-inch (M2), iPad Air 11-inch (M2), iPad Pro 12.9-inch (6th genera�on), iPad Pro 11-inch (4th genera�on), iPad (10th genera�on), iPad Air (5th genera�on), iPad (9th genera�on), iPad mini (6th genera�on), iPad Pro 12.9-inch (5th genera�on), iPad Pro 11-inch (3rd genera�on), iPad (8th genera�on), iPad Air (4th genera�on), iPad Pro 11-inch (2nd genera�on), iPad Pro 12.9-inch (4th genera�on)…

Text truncated - open the document above for the full version.

;LDPHQ+DQLQ&R/WG 5RRP$$QJ\H%XLOGLQJ3LRQHHU3DUN7RUFK+LJKWHFK=RQH;LDPHQ&LW\)XMLDQ 3URYLQFH&KLQD   5HY 'DWH  )HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ $XWKRUL]DWLRQDQG(YDOXDWLRQ'LYLVLRQ 2DNODQG0LOOV5RDG &ROXPELD0' 86$   5HI$WWHVWDWLRQ6WDWHPHQWV3DUW G  L DQG3DUW G  LL  )&&,'$87(=.+   3DUW G  L  ;LDPHQ+DQLQ&R/WGFHUWLILHVWKDWWKHHTXLSPHQWIRUZKLFKDXWKRUL]DWLRQ LV VRXJKWLVQRW³FRYHUHG ́ HTXLSPHQWDQGGRHVQRWFRQWDLQDQWLYLUXVVRIWZDUHRUF\EHUVHFXULW\VRIWZDUHSURKLELWHGIURPUHFHLYLQJDQ HTXLSPHQWDXWKRUL]DWLRQSXUVXDQWWR&)5.'%'&RYHUHG(TXLSPHQW*XLGDQFHDQG )&&&RYHUHG/LVW ZZZIFFJRYVXSSO\FKDLQFRYHUHGOLVW   3DUW G  LL  ;LDPHQ +DQLQ &R/WG FHUWLILHV WKDW DV RI WKH GDWH RI WKH ILOLQJ RI WKH DSSOLFDWLRQ WKH DSSOLFDQWLVQRW LGHQWLILHGRQWKH&RYHUHG/LVW DVDVSHFLILFDOO\QDPHGHQWLW\RU DQ\RI LWVVXEVLGLDULHVRUDIILOLDWHV DVDQ HQWLW\SURGXFLQJ³FRYHUHG ́HTXLSPHQW   6LQFHUHO\    6LJQDWRU\ >-HII:DQJ&HUWLILHG(QJLQHHU@

yŝĂŵĞŶ,ĂŶŝŶŽ͕͘>ƚĚ͘ ZŽŽŵϯϬρ͕ŶŐLJĞƵŝůĚŝŶŐ͕WŝŽŶĞĞƌWĂƌŬ͕dŽƌĐŚ,ŝŐŚͲƚĞĐŚŽŶĞ͕yŝĂŵĞŶŝƚLJ͕&ƵũŝĂŶWƌŽǀŝŶĐĞ ϯςϭϬϭρ͕ŚŝŶĂ  'DWH )HGHUDO&RPPXQLFDWLRQV&RPPLVVLRQ $XWKRUL]DWLRQDQG(YDOXDWLRQ'LYLVLRQ 2DNODQG0LOOV5RDG &ROXPELD0' 86$  )&&,'$87(=.+ $SSOLFDQW)51 86$JHQW±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

yŝĂŵĞŶ,ĂŶŝŶŽ͕͘>ƚĚ͘ ZŽŽŵϯϬρ͕ŶŐLJĞƵŝůĚŝŶŐ͕WŝŽŶĞĞƌWĂƌŬ͕dŽƌĐŚ,ŝŐŚͲƚĞĐŚŽŶĞ͕yŝĂŵĞŶŝƚLJ͕&ƵũŝĂŶWƌŽǀŝŶĐĞϯςϭϬϭρ͕ŚŝŶĂ  'DWH  )('(5$/&20081,&$7,216&200,66,21 $87+25,=$7,21$1'(9$/8$7,21',9,6,21 2$./$1'0,//652$' &2/80%,$0'  68%-(&7)&&$SSOLFDWLRQIRU)&&,'$87(=.+  &RQILGHQWLDOLW\5HTXHVW  7RZKRPLWPD\FRQFHUQ 3XUVXDQWWRWKHSURYLVLRQVRIWKH&RPPLVVLRQ¶VUXOHV7LWOH6HFWLRQV†DQG†ZHDUHUHTXHVWLQJWKH &RPPLVVLRQWRZLWKKROGWKHIROORZLQJDWWDFKPHQW V DVFRQILGHQWLDOGRFXPHQWVIURPSXEOLFGLVFORVXUHLQGHILQLWHO\ ܈ %ORFN'LDJUDP ܆ 7XQH8S,QIRUPDWLRQ ܈ 2SHUDWLRQDO'HVFULSWLRQ ܆ 6HFXULW\,QIRUPDWLRQ ܈ 6FKHPDWLFV ܆ 6RIWZDUH'HILQHG5DGLR 6'5 ,QIRUPDWLRQ ܆ 3DUWV/LVW   7KHDERYHPDWHULDOVFRQWDLQWUDGHVHFUHWVDQGSURSULHWDU\LQIRUPDWLRQQRWFXVWRPDULO\UHOHDVHGWRWKHSXEOLF7KH SXEOLF GLVFORVXUH RI WKHVH PDWHULDOV PD\ EH KDUPIXO WR WKH DSSOLFDQW DQG SURYLGH XQMXVWLILHG EHQHILWV WR LWV FRPSHWLWRUV ,QDGGLWLRQDOWRDERYHPHQWLRQHGGRFXPHQWVLQRUGHUWRFRPSO\ZLWKWKHPDUNHWLQJUHJXODWLRQVLQ7LWOH&)5 †DQGWKHLPSRUWDWLRQUXOHVLQ7LWOH&)5†ZKLOHHQVXULQJWKDWEXVLQHVVVHQVLWLYHLQIRUPDWLRQ UHPDLQVFRQILGHQWLDOXQWLOWKHDFWXDOPDUNHWLQJRIQHZO\DXWKRUL]HGGHYLFHVZHUHTXHVW6KRUW7HUP&RQILGHQWLDOLW\ RIWKHIROORZLQJDWWDFKPHQW V  ܆ ([WHUQDO3KRWRV ܆ 7HVW6HWXS3KRWRV ܆ ,QWHUQDO3KRWRV ܆ 8VHU0DQXDO  ܆ )RUGD\VSXUVXDQWWR3XEOLF1RWLFH'$ RU ܆  )RUGD\VSXUVXDQWWR.'%' 7KHDSSOLFDQWXQGHUVWDQGVWKDWSXUVXDQWWR6HFWLRQRIWKH5XOHVGLVFORVXUHRIWKLVDSSOLFDWLRQDQGDOO DFFRPSDQ\LQJGRFXPHQWDWLRQZLOOQRWEHPDGHEHIRUHWKHGDWHRIWKH*UDQWIRUWKLVDSSOLFDWLRQ  6LQFHUHO\    6LJQDWRU\ >-HII:DQJ&HUWLILHG(QJLQHHU@ 

yŝĂŵĞŶ,ĂŶŝŶŽ͕͘>ƚĚ͘ ZŽŽŵϯϬρ͕ŶŐLJĞƵŝůĚŝŶŐ͕WŝŽŶĞĞƌWĂƌŬ͕dŽƌĐŚ,ŝŐŚͲƚĞĐŚŽŶĞ͕yŝĂŵĞŶŝƚLJ͕&ƵũŝĂŶWƌŽǀŝŶĐĞϯςϭϬϭρ͕ ŚŝŶĂ  'DWH  )('(5$/&20081,&$7,216&200,66,21 $87+25,=$7,21$1'(9$/8$7,21',9,6,21 2$./$1'0,//652$' &2/80%,$0'   68%-(&7)&&,'$87(=.+  0RGHO'HFODUDWLRQ/HWWHU  'HDU5HJXODWRU\$XWKRULW\ 0RGHO V 07L+&3=.,+&3=.-07L3UR07+07+3UR079070DUHVDPHWR WKHPRGHO+&3=.+WKHVHPRGHOVDUHVDPH3&%/D\RXW6FKHPDWLFV%202QO\IRUGLIIHUHQWPRGHOQDPH DSSHDUDQFHFRORUIRUGLIIHUHQWPDUNHWUHTXLUH   6LQFHUHO\   6LJQDWRU\ >-HII:DQJ&HUWLILHG(QJLQHHU@ 

Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneer Park, Torch High-tech Zone, Xiamen City, Fujian Province 361015, China Date: 2026-09-10 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCCID: 2AUTE-2ZK25H LABEL LOCATION JUSTIFICATION LETTER TO WHOM IT MAY CONCERN: We place the FCC label in the storage area for the photo papers. due to below reasons: 1. The FCC label is visible when user open the top cover and installation for photo paper placement, otherwise, the equipment doesn’t work. 2. The equipment is separated from the photo paper in the packing box, users can read the FCC ID information at the time of purchase and installation. 3. Label placed on the equipment affect the appearance according to design requirements; otherwise, it would be easily removed or damaged. 4. User Manual will be showed the FCC ID and direct the user where to find the FCC ID information. Sincerely, Signatory [Jeff Wang, Certified Engineer]

yŝĂŵĞŶ,ĂŶŝŶŽ͕͘>ƚĚ͘ ZŽŽŵϯϬρ͕ŶŐLJĞƵŝůĚŝŶŐ͕WŝŽŶĞĞƌWĂƌŬ͕dŽƌĐŚ,ŝŐŚͲƚĞĐŚŽŶĞ͕yŝĂŵĞŶŝƚLJ͕&ƵũŝĂŶWƌŽǀŝŶĐĞϯςϭϬϭρ͕ ŚŝŶĂ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

Reference No.: WTX26X05144122W001/002 Page 2 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTX26X05144122W001/002 Page 3 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX26X05144122W001/002 Page 4 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTX26X05144122W001/002 Page 5 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7

Reference No.: WTX26X05144122W001/002 Page 1 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTX26X05144122W001/002 Page 6 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 EUT Housing and Board View 2 Reference No.: WTX26X05144122W001/002 Page 7 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 1 Solder Board-Component View 2 Reference No.: WTX26X05144122W001/002 Page 8 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 3 Solder Board-Component View 4 Reference No.: WTX26X05144122W001/002 Page 9 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 5 Solder Board-Component View 6 Reference No.: WTX26X05144122W001/002 Page 10 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 7 Solder Board-Component View 8 Reference No.: WTX26X05144122W001/002 Page 11 of 14 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 9 Antenna View Bluetooth Ant

Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 2 EXHIBIT 1 - EUT PHOTOGRAPHS EUT View 1 Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 2 EXHIBIT 2 - TEST SETUP PHOTOGRAPHS OTA Test View 1: ***** END OF REPORT *****

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn RF EXPOSURE REPORT Reference No. .................... : WTX26X05144122W005 FCC ID ................................ : 2AUTE-2ZK25H Applicant ........................... : Xiamen Hanin Co.,Ltd. Address ............................. : Room 305A, Angye Building,Pioneer Park, Torch High-tech Zone, Xiamen City, Fujian Province,China Manufacturer ..................... : The same as Applicant Address ............................. : The same as Applicant Product Name ................... : Portable Photo Printer Model No... ......................... : HCP-2ZK25H Standards .......................... : FCC Rule Part 1.1307 KDB 447498 D04 Date of Receipt sample .... : 2026-05-24 Date of Test ........................ : 2026-05-24 to 2026-08-04 Date of Issue ..................... : 2026-08-04 Report Form No. ............... : WTX_Part 1_1307W Result ................................. : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen/Project Engineer Jason Su/Manager Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn 1 General Information General Description of EUT Product Name: Portable Photo Printer Trade Name / Model No.: HCP-2ZK25H Adding Model(s): MT56i, HCP-2ZK25I, HCP-2ZK25J, MT56i Pro, MT56H, MT56H Pro, MT56V, MT56M Rated Voltage: Type-C:DC5V Battery:DC7.4V Battery Capacity: 550mAh Power Adapter: / Equipment Type: Portable device Technical Characteristics of EUT Bluetooth Bluetooth Version: V5.0 (LE mode) Frequency Range: 2402-2480MHz RF Output Power: -4.60dBm (Conducted) Data Rate: 1Mbps Modulation: GFSK Quantity of Channels: 40 Channel Separation: 2MHz Type of Antenna: PCB Antenna Bluetooth Bluetooth Version: V5.0 (BR/EDR mode) Frequency Range: 2402-2480MHz RF Output Power: -4.45dBm (Conducted) Data Rate: 1Mbps, 2Mbps, 3Mbps Modulation: GFSK, π/4 DQPSK, 8DPSK Quantity of Channels: 79 Channel Separation: 1MHz Type of Antenna: PCB Antenna Antenna Gain: 3.39dBi 2 Test Facility Address of the test laboratory Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn FCC – Registration No.: 125990 Waltek Testing Group (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is main tained in our files. The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Waltek Testing Group (Shenzhen) Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A and the CAB identifier is CN0057. 3 RF Exposure Exemption According to §1.1307(b)(3) and KDB 447498 D04 Interim General RF Exposure Guidance v01, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Option A: FCC Rule Part 1.1307 (b)(3)(i)(A):The available maximum time-averaged power is no more than 1mW, regardless of separation distance. Option B: FCC Rule Part 1.1307 (b)(3)(i)(B): The available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. P th is given by: Option C: FCC Rule Part 1.1307 (b)(3)(i)(C): The minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn calculated value prescribed for that frequency. R must be at least λ/2π, where λ is the free-space operating wavelength in meters. Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 1.34-30 3,450 R 2 /f 2 30-300 3.83 R 2 300-1,500 0.0128 R 2 f 1,500-100,000 19.2R 2 For Multiple RF sources: FCC Rule Part 1.1307(b)(3)(ii): (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). (B) In the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. 4 Calculated Result Radio Access Technology Prediction Frequency Output Power Antenna Gain Duty Cycle Tune-Up Time-Averaged Power ERP (MHz) (dBm) (dBi) (%) (dBm) (dBm) Bluetooth 2402 -4.45 3.39 100 -4.00 -2.76 Frequency Option Min. Distance Max. Power Exposure Limit Ratio Result (MHz) (cm) (dBm) (mW) (mW) Pass/Fail 2402 B 0.5 -2.76 0.53 2.788 0.19 Pass Note: 1. Time-Averaged Power=Output Power * Duty Cycle…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 12 TEST REPORT Reference No. ....................: WTX26X05144122W003 Applicant .......................... .: Xiamen Hanin Co.,Ltd. Address ............................ .: Room 305A, Angye Building,Pioneer Park, Torch High-tech Zone, Xiamen City, Fujian Province,China Manufacturer .................... .: Xiamen Hanin Co.,Ltd. Address ............................ .: Room 305A, Angye Building,Pioneer Park, Torch High-tech Zone, Xiamen City, Fujian Province,China Product Name .................. .: BT Antenna Model No... ........................ .: MT56i Standards ......................... .: ANSI/ IEEE 149-2021 Date of Receipt sample ... .: 2026-05-24 Date of Test....................... .: 2026-05-24 to 2026-07-10 Date of Issue .................... .: 2026-07-23 Test Report Form No. ...... . : WTX_IEEE 149 Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen/Project Engineer Jason Su/Manager Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 12 TABLE OF CONTENTS 1.GENERAL INFORMATION ..................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 2. SUMMARY OF TEST RESULTS ........................................................................................................................... 5 3. ANTENNA TEST CONFIGURATIONS ................................................................................................................. 6 3.1 TEST LOCATION .................................................................................................................................................... 6 3.2 TEST ENVIRONMENTS ........................................................................................................................................... 6 3.3 TEST EQUIPMENT LIST ......................................................................................................................................... 6 3.4 MEASUREMENT UNCERTAINTY ............................................................................................................................. 6 3.5 TEST SETUP .......................................................................................................................................................... 6 4. ANTENNA TEST RESULT ..................................................................................................................................... 7 4.1 GAIN AND EFFICIENCY .......................................................................................................................................... 7 4.2 RADIATION PATTERN 2D VIEW ............................................................................................................................. 8 4.3 RADIATION PATTERN 3D VIEW ............................................................................................................................. 9 EXHIBIT 1 - EUT PHOTOGRAPHS ........................................................................................................................ 11 EXHIBIT 2 - TEST SETUP PHOTOGRAPHS ........................................................................................................ 12 Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 3 of 12 Report version Version No. Date of issue Description Rev.00 2026-07-23 Original / / / Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 4 of 12 1.GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) General Description of EUT Product Name: BT Antenna Trade Name: / Model No.: MT56i Adding Model(s): / Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Frequency Range: 2400-2500MHz Gain of Antenna: 3.39dBi Type of Antenna: PCB Antenna Dimension: Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 5 of 12 2. SUMMARY OF TEST RESULTS Standards Description of Test Item Result ANSI/ IEEE 149-2021 IEEE Recommended Practice for Antenna Measurements Compliant N/A: not applicable Reference No.: WTX26X05144122W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 6 of 12 3. Antenna Test Configurations 3.1 Test Location Name: Sushi TOWE Wireless Testing(Shenzhen)Co., Ltd. Address: F 401/101, Building E, Hongwei Industrial Zone, No. 6, Liuxian 3rd Road, Bao'an District, Shenzhen,518133 3.2 Test Environments Environments Parameter Temperature Voltage Humidity NTNV 25 C -- 50% 3.3 Test Equipment List Description Manufacturer Model Serial Number Cal. Date Due. Date Anechoic Chamber ETS AMS8923 Q2225 2023-06-09 2028-06-08 RF Switch ETS EMCenter 251211 / / Vector network analyzer R&S ZNB8 101413 2025-07-15 2026-07-14 3.4 Measurement Uncertainty The uncertainty is calculated using the methods suggested in the“Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. When the test result is a critical value,we will use the measurement uncertainty give the judgment result based on the 95%Confidence in…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 46 TEST REPORT Reference No. ....................: WTX26X05144122W002 FCC ID ............................... .: 2AUTE-2ZK25H Applicant .......................... .: Xiamen Hanin Co.,Ltd. Address ............................ .: Room 305A, Angye Building,Pioneer Park, Torch High-tech Zone, Xiamen City, Fujian Province,China Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: Portable Photo Printer Model No.. ......................... .: HCP-2ZK25H Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2026-05-24 Date of Test....................... .: 2026-05-24 to 2026-08-04 Date of Issue .................... .: 2026-08-04 Test Report Form No. ...... . : WTX_Part 15_247W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen/Project Engineer Jason Su/Manager Reference No.: WTX26X05144122W002 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 46 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 …

Text truncated - open the document above for the full version.