2AUTE-ID888WBarcode Printer

Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026-02-12 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2AUTE-ID888W Xiamen Hanin Co.,Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Print name: JEFF WANG Title: Engineer Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Fujian, China Telephone: +86-(0)592-5935252 Email: [email protected]

Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2026-02-12 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2AUTE-ID888W Xiamen Hanin Co.,Ltd.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Print name: JEFF WANG Title: Engineer Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen Fujian, China Telephone: +86-(0)592-5935252 Email: [email protected]

TCB Authority to Act as Agent Page 1 of 1 Authority to Act as Agent Date: 2026-02-12 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint _Jonathan Li/TÜV Rheinland (Shenzhen) Co., Ltd._ to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Xiamen Hanin Co.,Ltd./ Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: __ Agreement is valid for 12 months from the above date. By: __________________________ JEFF WANG (Signature) (Print name) ____Engineer __________ +86-(0)592-5935252 (Title) (Telephone) On behalf of: Xiamen Hanin Co.,Ltd. (Company Name)

Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China. MS-0044715 Page 1 of 2 Revision 1 FCC Request for Confidentiality Letter Date: 2026-02-12 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2AUTE-ID888W Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Gain Information Datasheet Xiamen Hanin Co.,Ltd.has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecsting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China. MS-0044715 Page 2 of 2 Revision 1 Sincerely, Sincerely, By: / Engineer (Signature/Title) (Print name) JEFF WANG Telephone: +86-(0)592-5935252 Email: [email protected]

XiamenHaninCo.,Ltd. Declaration Productname:BarcodePrinter,LabelPrinter,BarcodeLabelPrinter Modelname:iD888W、HID428W、iD400W、DT400W、DT430W、 DT400W、DT430W、SD400W、SD430W、ND400W、ND430W、 ED400W、ED430W、JD400W、JD430W、D40W、D43W、SD401W、 SD603W、ND400W、iD430W、XD400W、XD430W、iD430W、 TD400W、TD430W、FD888W、D8W、FD400W、FD430W、SD400W、 V400W、V888W、V410W、V430W、E888W、S888W、N888W、 HD200W、HD888W、iD870PW、iD700PW、iD720PW、iD710PW、 HD700PW、SD700PW、ND700PW、ED700PW、WD700PW、J- 700PW、JD887PW、XD887PW、HD887PW、FJ-700PW、XD700PW、 JD700PW、SN700PW、ND710PW、ND720PW、HD710PW、 HD720PW、SD710PW、SD720PW、JF700PW、JS700PW、JE700PW、 JW700PW、JN700PW We(XiamenHaninCo.,Ltd.)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterand hardwaredesign(i.e.,circuitdesign,PCBLayout,RFmodule/circuit, antennatype(s)andantennalocation,componentsonPCB,etc.,), samemechanicalstructureanddesign(includingproductenclosure, materials,etc.,),theonlydifferenceisthemodelname. Demonstratethedetail(descriptionsandpictures)astothe differencelistabove. Signature: Name:JeffWang Title:Manager Place,date2026/1/13

Page 1 of 4 FCC ID: 2AUTE-ID888W Page 2 of 4 FCC ID: 2AUTE-ID888W Page 3 of 4 FCC ID: 2AUTE-ID888W Page 4 of 4 FCC ID: 2AUTE-ID888W

Label Location

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26WL0Y 003 Auftrags-Nr.: Order no.: 168582447 Seite 1 von 9 Page 1 of 9 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2025-11-13 Auftraggeber: Client: Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China Prüfgegenstand: Test item: Barcode Printer, Label Printer, Barcode Label Printer, Thermal Barcode Printer Bezeichnung / Typ-Nr.: Identification / Type no.: iD888W, HID428W, iD400W, DT400W, DT430W, DT400W, DT430W, SD400W, SD430W, ND400W, ND430W, ED400W, ED430W, JD400W, JD430W, D40W, D43W, SD401W, SD603W, ND400W, iD430W, XD400W, XD430W, iD430W, TD400W, TD430W, FD888W, D8W, FD400W, FD430W, SD400W, V400W, V888W, V410W, V430W, E888W, S888W, N888W, HD200W, HD888W, iD870PW, iD700PW, iD720PW, iD710PW, HD700PW, SD700PW, ND700PW, ED700PW, WD700PW, J-700PW, JD887PW, XD887PW, HD887PW, FJ-700PW, XD700PW, JD700PW, SN700PW, ND710PW, ND720PW, HD710PW, HD720PW, SD710PW, SD720PW, JF700PW, JS700PW, JE700PW, JW700PW, JN700PW Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 2: Section 2.1091 Wareneingangsdatum: Date of sample receipt: 2025-11-15 Please refer to photo documents Prüfmuster-Nr.: Test sample no: A004127548-001~002 Prüfzeitraum: Testing period: 2025-11-16 - 2026-01-13 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Jonathan Li genehmigt von: authorized by: X Signed by: Bell Hu Datum: Date: 2026-02-05 Ausstellungsdatum: Issue date: 2026-02-05 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AUTE-ID888W Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26WL0Y 003 Test report no.: Seite 2 von 9 Page 2 of 9 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsr…

Text truncated - open the document above for the full version.

ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -1- Bluetooth and WIFI antenna specification 1，Index Item Content Page Remark 1 Index 1 2 Spec Drawing 2‐3 3 Specification 4 4 Antenna On Test Board 5 5 Return Loss 5 6 Radiation Pattern 6 7 Gain and Efficiency 6 8 Bluetooth 2D Radiation Pattern 7 9 WIFI 2D Radiation Pattern 8 Document Type: 2.4GHZ & 5.8GHZ PCB antenna Document Version: V1.0 Release Date: 2019-12-11 ShenZhen Feasycom Technology Co.,Ltd Telephone: 86-755-27924639 www.feasycom.com ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -2- 2，Spec Drawing Unit：mm RF4 sheet thickness：0.8mm Top view ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -3- Bottom view ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -4- 3，Specification Product Number: 2.4GHZ FPC antenna Sample Photo: A. Electrical Characteristics Bluetooth Frequency 2400 ~ 2500 MHz WIFI Frequency（2.4GHZ） 2400 ~ 2500 MHz WIFI Frequency（5GHZ） 5180 ~ 5850 MHz S.W.R. <=3.0 Gain 0 dBi Efficiency ~ 30% Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator copper C. Environmental Operation Temperature - 40°C ~ + 85°C Storage Temperature - 40°C ~ + 105°C ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -5- 4，Antenna On Test Board 5, Return Loss ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -6- 6，Radiation Pattern Radiation Pattern and Gain were dependent on measurement board design. The specification of coil antenna was measur ed based on the PCB size and installation position as shown in the below figure Test Board. 6.1，Gain and Efficiency Frequency Gain(dBi) Efficiency Frequency Gain(dBi) Efficiency 2400 -2.49 26.54 5100 -2.68 17.21 2410 -1.9 29.34 5200 -2.01 20.24 2420 -1.83 29.58 5300 -2.42 20.42 2430 -1.73 30.29 5400 -1.81 22.4 2440 -1.56 30.65 5500 -2.83 17.93 2450 -1.59 30.32 5600 -5.65 12.01 2460 -1.67 30.05 5700 -2.23 19.69 2470 -1.79 29.19 5800 -2.35 22.95 2480 -1.93 26.84 5900 -2.78 22.07 ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -7- 6.2，Bluetooth 2D Radiation Pattern Theta=90° Phi=0° ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -8- Phi=90° 6.3，WIFI 2D Radiation Pattern Theta=90° ShenZhen Feasycom Technology Co.,Ltd www.feasycom.com -9- Phi=0° Phi=90°

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN26WL0Y 002 Auftrags-Nr.: Order no.: 168582447 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2025-11-13 Auftraggeber: Client: Xiamen Hanin Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech Zone, Xiamen City, Fujian Province, P.R. China Prüfgegenstand: Test item: Barcode Printer, Label Printer, Barcode Label Printer, Thermal Barcode Printer Bezeichnung / Typ-Nr.: Identification / Type no.: iD888W, HID428W, iD400W, DT400W, DT430W, DT400W, DT430W, SD400W, SD430W, ND400W, ND430W, ED400W, ED430W, JD400W, JD430W, D40W, D43W, SD401W, SD603W, ND400W, iD430W, XD400W, XD430W, iD430W, TD400W, TD430W, FD888W, D8W, FD400W, FD430W, SD400W, V400W, V888W, V410W, V430W, E888W, S888W, N888W, HD200W, HD888W, iD870PW, iD700PW, iD720PW, iD710PW, HD700PW, SD700PW, ND700PW, ED700PW, WD700PW, J-700PW, JD887PW, XD887PW, HD887PW, FJ-700PW, XD700PW, JD700PW, SN700PW, ND710PW, ND720PW, HD710PW, HD720PW, SD710PW, SD720PW, JF700PW, JS700PW, JE700PW, JW700PW, JN700PW Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 15: Subpart E Section 15.407 Wareneingangsdatum: Date of sample receipt: 2025-11-15 Please refer to photo documents Prüfmuster-Nr.: Test sample no: A004127548-001~002 Prüfzeitraum: Testing period: 2025-11-16 - 2026-01-13 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Jonathan Li genehmigt von: authorized by: X Signed by: Bell Hu Datum: Date: 2026-02-05 Ausstellungsdatum: Issue date: 2026-02-05 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AUTE-ID888W This report is for 5GHz Wi-Fi. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN26LMQK 002 Test report no.: Seite 2 von 20 Page 2 of 20 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific t…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN26WL0Y 001 Page 1 of 2 Appendix B: Photographs of the Test Set-Up APPENDIX B: PHOTOGRAPHS OF THE TEST SET-UP.......................................................................................................1 PHOTOGRAPH 1: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, BELOW 1GHZ..........................................................................2 PHOTOGRAPH 2: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, ABOVE 1GHZ..........................................................................2 Prüfbericht - Produkte Test Report - Products Appendix B CN26WL0Y 001 Page 2 of 2 Photograph 1: Set-up photo for Radiated Spurious Emission, Below 1GHz Photograph 2: Set-up photo for Radiated Spurious Emission, Above 1GHz