2AV29-56406NVR

USB Mouse Network Cable(1m) NVR NVR This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. When the product is working, only one of the Wi Fi templates can run.

Zhongshan Jesmay Electronics Co.,Ltd No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Date: Jul 03, 2020 FCC ID: 2AV29‐56406 Model Number: 56406, N029, N039, 56405, 56409, 56410, MZ-N208F To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Zhongshan Jesmay Electronics Co.,Ltd declare that this EUT (FCC ID: 2AV29‐56406) doesn’t have Ad Hoc mode function on “non‐US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1‐11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name: cong chen Company: Zhongshan Jesmay Electronics Co.,Ltd Address: No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Phone: 0760-86658681 Fax: 0760-86658681 E‐Mail: [email protected]

Zhongshan Jesmay Electronics Co.,Ltd Agent Authorization Date: Jul 03, 2020 Company: Zhongshan Jesmay Electronics Co.,Ltd Address: No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Product Description: NVR FCC ID Number: 2AV29-56406 Tested Model Number: 56406, N029, N039, 56405, 56409, 56410, MZ-N208F We authorize Eurofins Product Service GmbH, Storkower Strasse 38c, D-15526 Reichenwalde, Germany, to act on our behalf on all matters concerning the certification of above mentioned equipment. We declare that Eurofins Product Service GmbH is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We, Zhongshan Jesmay Electronics Co.,Ltd, the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.), Shenzhen Microwave Certification Services Co., Ltd. (Gilbert Lui, Marketing Manager) and Ka.Ma.S UG (Karin Schmidt, CEO) on our behalf, to apply to the Federal Communications Commission on our equipment. We, the undersigned, hereby authorize Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) to act on our behalf in matters relating to the application for a FCC equipment authorization for mentioned FCC ID Number including the signing of Form 731, necessary forms and documents in connection with this application. Any and all acts carried out by Shenzhen Toby Technology Co., Ltd. (Ivan Su, Supervisor of EMC Dep.) on our behalf shall have the same effect as acts of our own. This authorization expires on February 28, 2022 Yours Sincerely, Zhongshan Jesmay Electronics Co.,Ltd <Signature of cong chen > Name: cong chen Company: Zhongshan Jesmay Electronics Co.,Ltd Address: No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Phone: 0760-86658681 Fax: 0760-86658681 E-Mail: [email protected]

Zhongshan Jesmay Electronics Co.,Ltd CONFIDENTIALITY REQUEST for Certification under the FCC Rules Date: Jul 03, 2020 Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the following product: FCC ID Number: 2AV29‐56406 Tested Model Number: 56406, N029, N039, 56405, 56409, 56410, MZ-N208F For the product stated above, we request that the following information be held confidential: Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days Block Diagram Schematic Diagram/ Circuit Diagram Circuit Description/ Operational Description Parts List Tune Up Information User’s Manual External Photos Internal Photos Test Setup Photos The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. Please do not hesitate to contact me if you have any queries. Yours Sincerely, Zhongshan Jesmay Electronics Co.,Ltd <Signature of cong chen > Name: cong chen Company: Zhongshan Jesmay Electronics Co.,Ltd Address: No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Phone: 0760-86658681 Fax: 0760-86658681 E-Mail: [email protected] Zhongshan Jesmay Electronics Co.,Ltd

Zhongshan Jesmay Electronics Co.,Ltd Model Declaration Letter For FCC ID : 2AV29-56406 We, the undersigning company Company Name: Zhongshan Jesmay Electronics Co.,Ltd Address: No.1 Industry District, Tan Zhou Town, Zhong Shan City, Guangdong, China Hereby confirm that the following products: Product description: NVR Type designation: 56406, N029, N039, 56405, 56409, 56410, MZ-N208F . Trade name or Brand(s): Joustory, JSLBTECH, JouSecu, JouJou, TMEZON, JouLINK, Maysly That All these models are identical in the same PCB, layout and electrical circuit, the only difference is model name for commercial. City and Country: Date: Name: Signature: Zhongshan City, China 07/03/2020 cong chen

Report No.: TB-FCC173538 Page: 3 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Report No.: TB-FCC173538 Page: 4 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT Report No.: TB-FCC173538 Page: 5 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT 2.4G WiFi Ant. A Module#1 2.4G WiFi Ant. B of Module#1

Report No.: TB-FCC173538 Page: 1 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Appendix IFCC ID Label Size：60x52cm FCCID: 2AV29-56406 Model: 56406 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Report No.: TB-FCC173538 Page: 2 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Appendix II ID Label Location ID LOCATION

Report No.: TB-FCC173538 Page: 6 of 11 FCC ID: 2AV29-56406 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Internal of EUT Photo 11 Internal of EUT 2.4G WiFi Ant.A Module#2 Report No.: TB-FCC173538 Page: 7 of 11 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo 12 Internal of EUT Photo 13 Appearance of PCB Report No.: TB-FCC173538 Page: 8 of 11 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo 14 Appearance of PCB Photo 15 Appearance of PCB Module#1 Module#2 Report No.: TB-FCC173538 Page: 9 of 11 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo 15 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE173539 Page: 1 of 5 TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2AV29-56406 1. Client Information Applicant : Zhongshan Jesmay Electronics Co.,Ltd Address : No.1 Industry District, Tan Zhou Town, Zhongshan City, Guangdong, China Manufacturer : Zhongshan Jesmay Electronics Co.,Ltd Address : No.1 Industry District, Tan Zhou Town, Zhongshan City, Guangdong, China 2. General Description of EUT EUT Name : NVR Models No. : 56406, N029, N039, 56405, 56409, 56410, MZ-N208F Brand Name : Joustory, JSLBTECH, JouSecu, JouJou, TMEZON, JouLINK, Maysly Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz Power Rating : Adapter(R241-1202000U): Input: AC 100-240V, 50/60Hz, 0.8A Output: DC 12V, 2A Software Version : WNVR-WNIP2_20200420 Hardware Version : Hi3536D_V125P Connecting I/O Port(S) : Please refer to the User's Manual Remark : the MPE report used the EUT(20200525-17). Report No.: TB-MPE173539 Page: 2 of 5 TB-RF-075-1.0 MPE Calculations 1. Antenna Gain: Antenna Brand Type 2.4G Antenna Gain(dBi) ANT. A(module#1) N/A Dipole Ant 5.0 ANT. B(module#1) N/A Dipole Ant 5.0 ANT. A(module#2) N/A FPC Ant 5.0 Note: For MIMO mode: Directional Gain=ANT. Gain+10*LOG(N ANT ) =8.01dBi 2.4G working with 802.11b/g/n(HT20/HT40) has MIMO mode. When the product is working, only one of the Wi Fi templates can run. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Simultaneous transmission MPE Considerations According to KDB447498 :All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1.Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. This means that: ∑ of MPE ratios ≤ 1.0 Report No.: TB-MPE173539 Page: 3 of 5 TB-RF-075-1.0 5. Standalone MPE Evaluation: [2.4GHz WLAN](Module1) Mode Channel Frequency Peak Conducted Output Power (dBm) Tolerance ± (dB) Turn-up Power Tolerance (dB) Ant.A Ant.B Ant.A Ant.B IEEE 802.11b 1 2412 13.148 13.427 1.0 13±1 13±1 6 2437 12.844 13.096 1.0 13±1 13±1 11 2462 12.185 13.148 1.0 12±1 12±1 IEEE 802.11g 1 2412 12.521 13.019 1.0 12±1 13±1 6 2437 12.692 12.951 1.0 12±1 13±1 11 2462 13.256 11.304 1.0 13±1 11±1 IEEE 802.11n HT20 1 2412 13.346 12.695 1.0 13±1 12±1 6 2437 13.178 12.824 1.0 13±1 13±1 11 2462 12.824 12.421 1.0 13±1 12±1 IEEE 802.11n HT40 3 2422 13.838 12.937 1.0 13±1 13±1 6 2437 13.720 12.999 1.0 13±1 13±1 9 2452 13.142 12.960 1.0 13±1 13±1 [2.4GHz WLAN](Module2) Worst Maximum MPE Result Mode NT X Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm2) [S] 1802.11b 16.4302412 16±1 0.031520517 16.1512437 16±1 0.031520517 15.8432462 15±1 0.025020516 1802.11g 15.9332412 16±1 0.031520517 16.1122437 16±1 0.031520517 16.1932462 16±1 0.031520517 802.11n (HT20) 1 15.9712412 16±1 0.031520517 16.0522437 16±1 0.031520517 15.9672462 16±1 0.031520517 802.11n (HT40) 1 16.2772422 16±1 0.031520517 16.1462437 16±1 0.031520517 16.008 2452 16±1 0.031520517 Note: (1) N TX = Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TB-MPE173539 Page: 4 of 5 TB-RF-075-1.0 2.4GHz WLAN ANT. A(Module1) Modulation Type Output power (Turn-up Procedure) Antenna Gain (dBi) Antenna Gain (Numeric) Distance (cm) [R] MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11b 13.148 20.64 5.0 3.162 20 0.0130 1.0000 IEEE 802.11g 13.256 21.16 5.0 3.162 20 0.0133 1.0000 IEEE 802.11n HT20 13.346 21.60 5.0 3.162 20 0.0136 1.0000 IEEE 802.11n HT40 13.838 24.19 5.0 3.162 20 0.0152 1.0000 2.4GHz WLAN ANT. B(Module1) Modulation Type Output power (Turn-up Procedure) Antenna Gain (dBi) Antenna Gain (Numeric) Distance (cm) [R] MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11b 13.427 22.01 5.0 3.162 20 0.0138 1.0000 IEEE 802.11g 13.019 20.04 5.0 3.162 20 0.0126 1.0000 IEEE 802.11n HT20 12.824 19.16 5.0 3.162 20 0.0120 1.0000 IEEE 802.11n HT40 12.999 19.94 5.0 3.162 20 0.0125 1.0000 2.4GHz WLAN ANT. B(Module2) Modulation Type Output power (Turn-up Procedure) Antenna Gain (dBi) Antenna Gain (Numeric) Distance (cm) [R] MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11b 16.430 43.95 5.0 3.162 20 0.0276 1.0000 IEEE 802.11g 16.193 41.62 5.0 3.162 20 0.0261 1.0000 IEEE 802.11n HT20 16.052 40.29 5.0 3.162 20 0.0253 1.0000 IEEE 802.11n HT40 16.277 42.43 5.0 3.162 20 0.0267 1.0000 Remark: 1. Output power (Average) including turn-up tolerance; 2. Output power was adjust to duty cycle at 100% if measured duty cycle less than 98%; 3. MPE evaluate distance is 25cm from user manual provide by manufacturer. Report No.: TB-MPE173539 Page: 5 of 5 TB-RF-075-1.0 6. Summary simultaneous transmission information Modulation Type(Module1) Work Frequency Band Transmit Antenna Antenna A Antenna B Synchronization transmit Antenna A Antenna B IEEE 802.11b 2.4GHz Yes Yes Yes IEEE 802.11g 2.4GHz Yes Yes Yes IEEE 802.11n HT20 2.4GHz Yes Yes Yes IEEE 802.11n HT40 2.4GHz Yes Yes Yes 7. Summary simultaneous transmission results Antenna A and Antenna B for 2.4GWLAN(Module1) Modulation Type …

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.:TB-FCC173538 Page: 1 of 167 TB-RF-074-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: 2AV29-56406 Original Grant Report No. : TB-FCC173538 Applicant : Zhongshan Jesmay Electronics Co.,Ltd Equipment Under Test (EUT) EUT Name : NVR Model No. : 56406 Series Model No. : N029, N039, 56405, 56409, 56410, MZ-N208F Brand Name : Joustory, JSLBTECH, JouSecu, JouJou, TMEZON, JouLINK, Maysly Receipt Date : 2020-06-05 Test Date : 2020-06-05 to 2020-07-03 Issue Date : 2020-07-03 Standards : FCC Part 15, Subpart C 15.247 Test Method : ANSI C63.10: 2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC and IC requirements Test/Witness Engineer : Jack Deng Engineer Supervisor : Ivan Su Authorized Signatory : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC173538 Page: 2 of 167 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION TEST ........................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 14 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED EMISSION TEST ................................................................................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 16 6.3 Test Procedure ................................................................................................................... 17 6.4 Deviation From Test Standard ......................................................................................... 18 6.5 EUT Operating Condition ................................................................................................. 18 6.6 Test Data ............................................................................................................................. 18 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 19 7.1 Test Standard and Limit .................................................................................................... 19 7.2 Test Setup ........................................................................................................................... 19 7.3 Test Procedure ................................................................................................................... 20 7.4 Deviation From Test Standard ......................................................................................... 20 7.5 EUT Operating Condition ................................................................................................. 20 7.6 Test Data ............................................................................................................................. 20 8. BANDWIDTH TEST ................................................................................................................. 21 8.1 Test Standard and Limit .…

Text truncated - open the document above for the full version.

Report No.: TB-FCC173538 Page: 9 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Below 1 GHz) Report No.: TB-FCC173538 Page: 10 of 10 FCC ID: 2AV29-56406 TB-RF-074-1.0 Photo of Setup for Conducted Emission -----END OF REPORT-----