2AV9UZ10PROFormuler Z10 Pro

Quick Setup Guide & Safety Information Go to the link below for #GIVEAWAY rule information https://formuler.tv/giveaway Enter the giveaway for a chance to win a prize. Thank you for your purchase. 1 Connect your FORMULER to your TV with an HDMI cable. Connect your FORMULER to power using the power cord. Turn on your TV and switch to the correct HDMI input. 1 2 3 Set-up your FORMULER and connect to your local network. 4 5 Installation Guide EN Wired NetworkWireless Network Install your favorite apps to enjoy streaming contents * . 2 Media Receiver Remote Control Extender Remote Control 2x Batteries What’s in the Box? EN TV CablePower Adapter 3 Verbinden Sie Ihre FORMULER und den Fernseher mit einem HDMI Kabel. Schließen Sie Ihre FORMULER über das Netzkabel an die Stromversorgung an. Schalten Sie Ihr Fernsehgerät ein und wechseln Sie zum richtigen HDMI-Eingang. 1 2 3 Richten Sie Ihre FORMULER ein und stellen Sie eine Verbindung zum lokalen Netzwerk her. 4 Installieren Sie Ihre gewünschten Apps um die Streaming – Angebote genießen zu können * . 5 Installationsanleitung DE Kabelgebundenes NetzwerkDrahtloses Netzwerk 4 Medienempfänger Fernbedienung Extender Fernbedienung 2 x Batterien Was ist in der Box? DE TV-KabelNetzteil 5 RED Declaration FORMULER hereby declares that this wireless device complies with all material requirements and other relevant provisions of the 2014/53/EU Directive. A copy of the Declaration of Conformity may be obtained directly from COBOPLUS [Thomas Edison 4, 28521 Madrid, Spain] For technical support, regulatory compliance information, and user guide, visit https://support.formuler.tv SAFETY INFORMATION FORMULER products are designed to operate safely when installed and used according to the product instructions and general safety practices. The guidelines included in this document explain the potential risks associated with equipment operation and provide important safety practices designed to minimize these risks. By carefully following the information contained in this document, you can protect yourself from hazards and create a safer environment. This product is designed and tested to meet IEC 62368-1, the Standard for Safety of Information Technology Equipment. This also covers the implementation of IEC 62368-1 based safety standards around the world, e.g. UL 60950-1. Retain and follow all product safety and operating instructions. Always refer to the documentation supplied with your equipment. Observe all warnings on the product and in the operating instructions. Note: Read all safety information below and operating instructions before using FORMULER to avoid injury. WARNING: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK OR OTHER INJURY OR DAMAGE. ELECTRICAL EQUIPMENT CAN BE HAZARDOUS IF MISUSED. OPERATION OF THIS PRODUCT, OR SIMILAR PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE INTERIOR OF ANY ELECTRICAL PRODUCT AND DO NO PERMIT THEM TO HANDLE AND CABLES. 6 SYMBOLS ON THE EQUIPMENT This is a universal recycling symbol indicating that the battery cannot be disposed of in the trash and must be recycled according to the regulations and/or ordinances of the local community. To reduce the risk of personal injury, electric shock, fire, or damage to the equipment, observe the following precautions: Follow all cautions and instruct ions marked on the equipment POWER RATING : 12 VDC, 1.0A - Do not bend, drop, crush, puncture, incinerate, or push objects into openings of FORMULER. - Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. - Do not use FORMULER in wet locations. In case FORMULER gets wet, unplug all cables and turn off before cleaning, and allow it to dry thoroughly before turning it on again. - Never turn on any equipment when there is evidence of fire, water, or structural damage. - Place the product away from heat sources. - Never force a connector into a port. Make sure the connector matches the port before inserting. - Always use a FORMULER approved power adapter. Do not connect or disconnect the AC Power Adapter with wet hands. The power adapter is intended for indoor use only. - Operate the AC adapter in a ventilated area. - Do no make mechanical or electrical modifications to the equipment. - Never attempt to repair FORMULER yourself. Do not attempt to open, disassemble the device. You run the risk of electric shock. - Operate FORMULER in a place where the temperature is always between 5 and 30 degrees Celsius. - Use this product only with approved equipment and/or accessories. 7 Déclaration RED FORMULER déclare par la présente que cet appareil sans fil respecte toutes les exigences matérielles et autres dispositions pertinentes de la Directive 2014/53 / UE. Une copie de la Déclaration de Conformité peut être obtenue directement auprès de COBOPLUS [Thomas Edison 4, 28521 Madrid, Espagne] Pour obtenir une assistance technique, des informations sur la conformité aux réglementations et un manuel d’utilisation, visitez le site https://support.formuler.tv INFORMATION SUR LA SÉCURITÉ Les produits FORMULER sont conçus pour fonctionner en toute sécurité lorsqu'ils sont installés et utilisés conformément aux instructions du produit et aux consignes de sécurité générales. Les directives incluses dans ce document expliquent les risques potentiels associés au fonctionnement de l'équipement et fournissent des pratiques de sécurité importantes conçues pour minimiser ces risques. En suivant attentivement les informations contenues dans ce document, vous pouvez vous protéger des dangers et créer un environnement plus sûr. Ce produit a été conçu et testé pour répondre à la norme IEC 62368-1, norme sur la sécurité des équipements informatiques. Cela couvre également la mise en œuvre des normes de sécurité basées sur la IEC 62368-1 dans le monde entier, par exemple. UL 60950-1. Conservez et suivez toutes les instructions de …

Text truncated - open the document above for the full version.

ALOYS INC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-07-28 Subject; Request for Confidentiality FCC ID: 2AV9UZ10PRO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Software Security Requirements For U-NII Devices Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: martin Title: Manager

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 4 External Photos of the EUT Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 4 Fig.7 Fig.8

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L2.0cm*W1.5cm Label Location Formuler Z10 Pro Model No.: Z10 Pro FCC ID: 2AV9UZ10PRO

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 4 Internal Photos of the EUT Fig.1 Fig.2 BT Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 4 Fig.3 Fig.4 Antenna 0 Antenna 1 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 4 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 13 Maximum Permissible Exposure Report 1. Product Information FCC ID: 2AV9UZ10PRO Product name Formuler Z10 Pro Test Model Z10 Pro Power supply For Adapter Model: TEKA-TB120100US Input: 100-240V~, 50/60Hz, 0.35A MAX Output: 12.0V 1.0A Operation frequency 2402MHz‐2480MHz 2412MHz‐2462MHz 5180MHz‐5240MHz 5745MHz‐5825MHz Antenna Type ANT0: Internal Antenna ANT1: InternalAntenna Antenna Gain 2.0dBi(Max) Hardware version EZ504 Software version 1.4.90‐r26061 Channel Number 79 channels for Bluetooth V5.0(BDR/EDR) 40 channels for Bluetooth V5.0 (BT LE) 11 Channels for 20MHz bandwidth (2412~2462MHz) 7 Channels for 40MHz bandwidth (2422~2452MHz) 4 channels for 20MHz bandwidth (5180‐5240MHz) 2 channels for 40MHz bandwidth (5190~5230MHz) 1 channels for 80MHz bandwidth (5210MHz) 5 channels for 20MHz bandwidth(5745‐5825MHz) 2 channels for 40MHz bandwidth(5755~5795MHz) 1 channels for 80MHz bandwidth(5775MHz) Channel Spacing 5MHz Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far‐field plane‐wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 13 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: Mobile Devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane‐wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97‐01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information ES‐D4 can only use antennas certificated as follows provided by manufacturer; Antenna type and antenna number Operate frequency band Maximum antenna gain Notes Internal Antenna 0 Internal Antenna 1 2412MHz‐2462MHz 5180MHz‐5240MHz 5745MHz‐5825MHz 2 dBi WiFi Antenna Internal Antenna 2402MHz‐2480MHz 2dBiBT SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 13 6. Conducted Power [BT Max Conducted Power] Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 3.526 39 2441 4.871 78 2480 3.253 π/4DQPSK 0 2402 2.714 39 2441 4.071 78 2480 2.513 8DPSK 0 2402 2.820 19 2441 4.215 39 2480 2.667 [BLE Max Conducted Power] Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) BT LE 0 2402 3.417 19 2440 4.747 39 2480 3.209 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 13 [2.4GWIFI Max Conducted Power] Mode Channel Frequency (MHz) ANT 0 Max Conducted Power(dBm) ANT 1 Max Conducted Power(dBm) 11B 1 2412 14.54 11.94 6 2437 14.68 11.52 11 2462 14.75 10.93 11G 1 2412 1…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 1 of 48 Appendix A RF Test Data for BT V5.0(BDR/EDR) (Conducted Measurement) Product Name: Formuler Z10 Pro Trade Mark: FORMULER Test Model: Z10 Pro Environmental Conditions Temperature: 23.7 C Relative Humidity: 51.6% ATM Pressure: 100.0 kPa Test Engineer: Jay Li Supervised by: Li Huan Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 2 of 48 A.1 Maxmum Conducted Peak Output Power Mode Channel. Maximum Peak Output Power [dBm]Limit [dBm] Verdict GFSK LCH 3.526 21 PASS MCH 4.871 21 PASS HCH 3.253 21 PASS π/4DQPSK LCH 2.714 21 PASS MCH 4.071 21 PASS HCH 2.513 21 PASS 8DPSK LCH 2.820 21 PASS MCH 4.215 21 PASS HCH 2.667 21 PASS Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 3 of 48 Test Graphs GFSK/LCH GFSK/MCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 4 of 48 GFSK/HCH π/4DQPSK/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 5 of 48 π/4DQPSK/MCH π/4DQPSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 6 of 48 8DPSK/LCH 8DPSK/MCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 7 of 48 8DPSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 8 of 48 A.2 20dB Bandwidth Mode Channel. 20dB Bandwidth [MHz] Limit [MHz] Verdict GFSK LCH 0.9686 Not Specified PASS MCH 1.035 Not Specified PASS HCH 1.038 Not Specified PASS π/4DQPSK LCH 1.289 Not Specified PASS MCH 1.311 Not Specified PASS HCH 1.289 Not Specified PASS 8DPSK LCH 1.294 Not Specified PASS MCH 1.291 Not Specified PASS HCH 1.293 Not Specified PASS Test Graphs GFSK/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 9 of 48 GFSK/MCH GFSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 10 of 48 π/4DQPSK/LCH π/4DQPSK/MCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 11 of 48 π/4DQPSK/HCH 8DPSK/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 12 of 48 8DPSK/MCH 8DPSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 13 of 48 A.3 Carrier Frequency Separation Mode Channel. Carrier Frequency Separation [MHz] Limit [MHz] Verdict GFSK LCH 1.033 0.692 PASS MCH 1.008 0.692 PASS HCH 0.980 0.692 PASS π/4DQPSK LCH 0.916 0.874 PASS MCH 1.142 0.874 PASS HCH 1.026 0.874 PASS 8DPSK LCH 1.010 0.863 PASS MCH 1.154 0.863 PASS HCH 1.100 0.863 PASS Test Graphs GFSK/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 14 of 48 GFSK/MCH GFSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 15 of 48 π/4DQPSK/LCH π/4DQPSK/MCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 16 of 48 π/4DQPSK/HCH 8DPSK/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 17 of 48 8DPSK/MCH 8DPSK/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 18 of 48 A.4 Hopping Channel Number Mode Channel. Number of Hopping Channel [N]Limit [N] Verdict GFSK Hop 79 >=15 PASS π/4DQPSK Hop 79 >=15 PASS 8DPSK Hop 79 >=15 PASS Test Graphs GFSK/Hop π/4DQPSK/Hop Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 19 of 48 8DPSK/Hop Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 20 of 48 A.5 Dwell Time Mode Packet Channel Burst Width [ms/hop/ch] Total Hops[hop*ch] Dwell Time[s] Limit [s]Verdict GFSK DH5 LCH 2.88 106.7 0.307 0.4 PASS DH5 MCH 2.88 106.7 0.307 0.4 PASS DH5 HCH 2.88 106.7 0.307 0.4 PASS π/4DQPSK 2DH5 LCH 2.88 106.7 0.307 0.4 PASS 2DH5 MCH 2.88 106.7 0.307 0.4 PASS 2DH5 HCH 2.88 106.7 0.307 0.4 PASS 8DPSK 3DH5 LCH 2.88 106.7 0.308 0.4 PASS 3DH5 MCH 2.88 106.7 0.308 0.4 PASS 3DH5 HCH 2.88 106.7 0.308 0.4 PASS Test Graphs GFSK_DH5/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 21 of 48 GFSK_DH5/MCH GFSK_DH5/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 22 of 48 π/4DQPSK _2DH5/LCH π/4DQPSK _2DH5/MCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 23 of 48 π/4DQPSK _2DH5/HCH 8DPSK _3DH5/LCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 24 of 48 8DPSK _3DH5/MCH 8DPSK _3DH5/HCH Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 25 of 48 A.6 RF Conducted Spurious Emissions Mode Channel Pref [dBm] Max. Level [dBm] Limit [dBm] Verdict GFSK LCH 3.215 -38.188 -16.785 PASS MCH 4.569 -37.848 -15.431 PASS HCH 2.913 -38.175 -17.087 PASS π/4DQPSK LCH 1.578 -37.502 -18.422 PASS MCH 2.928 -37.598 -17.072 PASS HCH 1.619 -38.148 -18.381 PASS 8DPSK LCH 1.628 -37.889 -18.372 PASS MCH 3.099 -38.362 -16.901 PASS HCH 1.51 -37.845 -18.490 PASS GFSK_LCH_Graphs Pref Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 26 of 48 Puw Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 27 of 48 GFSK_MCH_Graphs Pref Puw Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page 28 of 48 GFSK_HCH_Graphs Pref Puw Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA Page …

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 38 FCC TEST REPORT For ALOYS INC. Formuler Z10 Pro Test Model: Z10 Pro Prepared for : ALOYS INC. Address : #6F ,MARCUS Bldg.,4-5, Yanghyeon-ro405beon-gil,jungwon-gu, Seongnam-si, Gyeonggi-do, South Korea Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : June 25, 2021 Number of tested samples : 2 Serial number : 210623059A-1(Engineer sample), 210623059A-2(Normal sample) Date of Test : June 25, 2021 ~ July 12, 2021 Date of Report : July 14, 2021 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 38 FCC TEST REPORT FCC CFR 47 PART 15 C (15.247) Report Reference No. ................. : LCS210623059AEA Date of Issue .................................. : July 14, 2021 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : ALOYS INC. Address .......................................... : #6F ,MARCUS Bldg.,4-5, Yanghyeon-ro405beon-gil,jungwon-gu, Seongnam-si, Gyeonggi-do, South Korea Test Specification Standard ......................................... : FCC CFR 47 PART 15 C (15.247) Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. .......................... : Formuler Z10 Pro Trade Mark ..................................... : FORMULER Test Model...................................... : Z10 Pro Ratings ........................................... : For Adapter Model: TEKA-TB120100US Input: 100-240V~, 50/60Hz, 0.35A MAX Output: 12.0V 1.0A Result ........................................... : Positive Compiled by: Supervised by: Approved by: Ray Yang/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 38 FCC -- TEST REPORT Test Model............................... : Z10 Pro EUT......................................... : Formuler Z10 Pro Applicant............................... : ALOYS INC. Address.................................. : #6F ,MARCUS Bldg.,4-5, Yanghyeon-ro405beon-gil,jungwon-gu, Seongnam-si, Gyeonggi-do, South Korea Telephone............................... : Fax.......................................... : Manufacturer........................ : ALOYS INC. Address................................... : #6F ,MARCUS Bldg.,4-5, Yanghyeon-ro405beon-gil,jungwon-gu, Seongnam-si, Gyeonggi-do, South Korea Telephone............................... : Fax.......................................... : Factory................................... : Sichuan Changhong Network Technologies Co., Ltd. Address................................... : G05 Factory Premises, Changhong Intelligent Display Terminal Industrial Park, 38, Xinping Avenue, High-tech District, Mianyang 621000, P. R. China Telephone............................... : Fax.......................................... : Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS210623059AEA July 14, 2021 Date of issue Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 38 Revision History Revision Issue Date Revisions Revised By 000 July 14, 2021 Initial Issue Gavin Liang Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AV9UZ10PRO Report No.: LCS210623059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 38 TABLE OF CONTENTS Description .................................................................................................................................. Page 1. GENERAL INFORMATION ................................................................................................................................... 6 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................ 6 1.2. HOST SYSTEM CONFIGURATION LIST…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Test Setup Photos of the EUT Test Setup Photo(s) of Radiated Emissions Measurement Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV9UZ10PRO _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 Test Setup Photo(s) of Conducted Emissions Measurement Fig. 3