2AWMK-BTP-MKA game controller made for ios

Test Report No. FCC2021-0013 External Photograph

FCC ID:2AWMK-BTP-MKCMIIT ID:xxxxxxxxxx Guangzhou Pinzhong Electronic Technology CO., Ltd.

Test Report No. FCC2021-0013 Internal Photograph (1) Internal Photo Test Report No. FCC2021-0013 Test Report No. FCC2021-0013 Test Report No. FCC2021-0013 (2) Antenna Photo

TEST REPORT FCC ID : 2AWMK-BTP-MK Applicant : Guangzhou Pinzhong Electronic Technology CO., Ltd. Product Name : BEITONG iOS GAME CONTROLLER EX Mode No. : BTP-iG6 CVC Testing Technology Co., Ltd. Test Report No.: FCC2021-0013-RF ng Technolog CVC Testing Technology Co., Ltd. Test Report No. FCC2021-0013-RF Page 2 of 82 LTC-R-7092-RF-Part15C-A1 Applicant Name: Guangzhou Pinzhong Electronic Technology CO., Ltd. Address : Room 611-612, Greenland Center of Financial City, No. 662, Huangpu Avenue Middle Road, Tianhe District, Guangzhou City, Guangdong Province, China Manufacturer Name: Guangzhou Pinzhong Electronic Technology CO., Ltd. Address: Room 611-612, Greenland Center of Financial City, No. 662, Huangpu Avenue Middle Road, Tianhe District, Guangzhou City, Guangdong Province, China Equipment Under Test Product Name : BEITONG iOS GAME CONTROLLER EX Model No. : BTP-iG6 Trade mark : Serial no. : 2430-624-010 Sampling : 1-1 Date of Receipt. 2021.06.08 Date of Testing 2021.06.08~2021.07.26 Test Specification Test Result FCC CFR47 Part 15C (2020) Radio Frequency Devices ANSI C63.10 (2013) DA00-705 Filing and Frequency Measurement Guidelines For Frequency Hopping Spread Spectrum System (2000). PASS Evaluation of Test Result The equipment under test was found to comply with the req uirements of the standards applied. Seal of CVC Issue Date: 2021.07.26 Tested by: Xu Zhenfei Reviewed by: Liu Yonghai Approved by: Chen Huawen Other Aspects: NONE. Abbreviations:OK, Pass= passed Fail = failed N/A= not applicable EUT= equipment, sample(s) under tested This test report relates only to the EUT, and shall not be reproduced except in full, without written approval of CVC. o complywith the Seal of CVC sue Date: 2021.07.26 ed by: CVC Testing Technology Co., Ltd. Test Report No. FCC2021-0013-RF Page 3 of 82 LTC-R-7092-RF-Part15C-A1 TABLE OF CONTENTS 1. GENERAL PRODUCT INFORMATION ................................................................................................... 4 1.1 GENERAL INFORMATION ............................................................................................................................ 4 2. TEST SITES ............................................................................................................................................... 5 2.1 TEST FACILITIES ........................................................................................................................................ 5 2.2 DESCRIPTION OF NON-STANDARD METHOD AND DEVIATIONS ................................................................. 5 2.3 LIST OF TEST AND MEASUREMENT INSTRUMENTS ................................................................................... 5 3. TEST CONFIGURATION .......................................................................................................................... 6 3.1 TEST MODE ............................................................................................................................................... 6 3.2 DUTY CYCLE .............................................................................................................................................. 7 4. SUMMARY OF MEASUREMENT RESULTS .......................................................................................... 8 5. MEASUREMENT PROCEDURE ............................................................................................................. 9 5.1 CONDUCTED EMISSION ............................................................................................................................. 9 5.2 RADIATED EMISSION ............................................................................................................................... 12 5.3 PEAK POWER OUTPUT -CONDUCTED ..................................................................................................... 30 5.4 20DB EMISSION BANDWIDTH .................................................................................................................. 32 5.5 OCCUPIED CHANNEL BANDWIDTH .......................................................................................................... 38 5.6 FREQUENCY SEPARATION ....................................................................................................................... 43 5.7 TIME OF OCCUPANCY (DWELL TIME) ...................................................................................................... 46 5.8 BAND EDGE MEASUREMENT ................................................................................................................... 56 5.9 NUMBER OF HOPPING FREQUENCY ......................................................................................................... 63 5.10 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................. 66 6. APPENDIX E ............................................................................................................................................ 82 CVC Testing Technology Co., Ltd. Test Report No. FCC2021-0013-RF Page 4 of 82 LTC-R-7092-RF-Part15C-A1 1. General Product Information 1.1 General information Product Name BEITONG iOS GAME CONTROLLER EX Model No. BTP-iG6 Serial Number(SN) 2430-624-010 Power Supply Adapter DC 5V Battery DC 3.7V Antenna Type PCB Antenna Antenna Connector A permanently attached antenna (meet with the standard FCC Part 15.203 requirement) Antenna Gain Antenna 1: 1.5 dBi (provided by client) Frequency Range 2402MHz~2480MHz Bluetooth Version: BT4.1 Channel Number 79 Type of Modulation GFSK, π/4DQPSK, 8DPSK Hopping Channel Type: Non-Adaptive Frequency Hopping systems Max. Conducted Power DH5: 0.13dBm 2DH5: -3.16dBm 3DH5: -2.74dBm Operate Temp.Range -20°C to +60°C Note˖ 1. The information of the EUT is declared by the manufacturer. 2. The laboratory is not responsible for the product technical specification provided by the client. CVC Testing Technology Co., Ltd. Te…

Text truncated - open the document above for the full version.

TEST REPORT FCC ID 2AWMK-BTP-MK Applicant : Guangzhou Pinzhong Electronic Technology CO., Ltd. Product Name : BEITONG iOS GAME CONTROLLER EX Mode No. : BTP-iG6 CVC Testing Technology Co., Ltd. Test Report No.: FCC2021-0013-EX Test Report No. FCC2021-0013-EX Page 2 of 7 LTC-R-7093-RF-Part15E-A0 Applicant Name: Guangzhou Pinzhong Electronic Technology CO., Ltd. Address: Room 611-612, Greenland Center of Financial City, No. 662, Huangpu Avenue Middle Road, Tianhe District, Guangzhou City, Guangdong Province, China Manufacturer Name: Guangzhou Pinzhong Electronic Technology CO., Ltd. Address: Room 611-612, Greenland Center of Financial City, No. 662, Huangpu Avenue Middle Road, Tianhe District, Guangzhou City, Guangdong Province, China Equipment Under Test Product Name : BEITONG iOS GAME CONTROLLER EX Model No. : BTP-iG6 Trade mark : Serial no. : 430-624-010 Sampling : 1-1 Date of Receipt. 2021.06.08 Date of Testing 2021.06.08~2021.07.26 Test Specification Test Result FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 PASS Evaluation of Test Result The equipment under test was found to comply with the requirements of the standards applied. Seal of CVC Issue Date: 2021.07.26 Tested by: Xu Zhenfei Reviewed by: Liu Yonghai Approved by: Chen Huawen Other Aspects: NONE. Abbreviations:OK, Pass= passed Fail = failed N/A= not applicable EUT= equipment, sample(s) under tested This test report relates only to the EUT, and shall not be reproduced except in full, without written approval of CVC. Test Report No. FCC2021-0013-EX Page 3 of 7 LTC-R-7093-RF-Part15E-A0 TABLE OF CONTENTS 1. GENERAL PRODUCT INFORMATION ................................................................................................... 4 1.1 GENERAL INFORMATION ............................................................................................................................ 4 2. HUMAN EXPOSURE ASSESSMENT ...................................................................................................... 5 2.1 RF EXPOSURE DEFINE ....................................................................................................................... 5 2.2 CLASSIFICATION .................................................................................................................................. 5 3. RF OUTPUT POWER ................................................................................................................................ 6 4. TEST RESULTS ......................................................................................................................................... 7 Test Report No. FCC2021-0013-EX Page 4 of 7 LTC-R-7093-RF-Part15E-A0 1. General Product Information 1.1 General information Product Name BEITONG iOS GAME CONTROLLER EX Model No. BTP-iG6 Power Supply Adapter DC 5V Battery DC 3.7V Antenna Type PCB antenna Antenna Gain Antenna 1: 1.5 dBi (provided by client) Beamforming gain Unsupported Frequency Range 2402~2480MHz Operate Temp.Range -20°C to +60°C Note： 1. The information of the EUT is declared by the manufacturer. 2. The laboratory is not responsible for the product technical specification provided by the client. Test Report No. FCC2021-0013-EX Page 5 of 7 LTC-R-7093-RF-Part15E-A0 2. Human Exposure Assessment 2.1 RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 2.2 CLASSIFICATION The antenna of this product, under normal use condition, is at less than 20cm away from the body of the user. So, this device is classified as Portable Device. Test Report No. FCC2021-0013-EX Page 6 of 7 LTC-R-7093-RF-Part15E-A0 3. RF Output Power The tuned conducted Average Power (declared by client) Mode Frequency (MHz) Target Power (dBm) Tolerance (dBm) Lower Tolerance (dBm) Upper Tolerance (dBm) BT(DH5) 2402-2480MHz -1.50 +-2 -3.50 0.50 BT(2DH5) 2402-2480MHz -5.00 +-2 -7.00 -3.00 BT(3DH5) 2402-2480MHz -4.50 +-2 -6.50 -2.50 The conducted power turn-up tolerance reference manufacturer specification. Test Mode Antenna Center Frequency[MHz] Result[dBm] Limit[dBm] Verdict DH5 Ant1 2402 -3.41 <=30 PASS 2441 -0.1 <=30 PASS 2480 0.13 <=30 PASS 2DH5 Ant1 2402 -6.45 <=20.97 PASS 2441 -3.26 <=20.97 PASS 2480 -3.16 <=20.97 PASS 3DH5 Ant1 2402 -6.46 <=20.97 PASS 2441 -3.02 <=20.97 PASS …

Text truncated - open the document above for the full version.

Test Setup Photograph (1) Radiated spurious emission Test Setup(Below 30MHz) (2) Radiated spurious emission Test Setup (Below 1 GHz) (3) Radiated spurious emission Test Setup (Above1 GHz)