2AWY6-EAI8800DCTWIFI Module

EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED Address: Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Product Name: WIFI Module FCC ID: 2AWY6-EAI8800DCT Model(s): EL.AIC8800D-CWFT 2.911(d)(5)(i) EquipmentType We, [EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Zilong Lai Date: 8/29/2025 Title and Company name: Manager / EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED Address: Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Product Name: WIFI Module FCC ID: 2AWY6-EAI8800DCT Model(s): EL.AIC8800D-CWFT 2.911(d)(5)(ii) Applicant filing We, EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Zilong Lai Date: 8/29/2025 Title and Company name: Manager / EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District Shenzhen, GuangDong China Date: 2025-09-01 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AWY6-EAI8800DCT FRN: 0029787975 US Agent – Attestation Statement / Part 2.911(d)(7) EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED certifies, that as of 2025-09-01, we h ave designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AWY6-ERT8723DUCT. EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED for FCC ID: 2AWY6-ERT8723DUCT. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: EXPRESS LUCK INDUSTRIAL （SHENZHEN）LIMITED Designated Agent: FCC US Agent, LLC Company Representative: Zilong Lai Designated Agent Representative: Tim Payne Signature: Signature:

EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED FCC Modular Approval Request Rev 4.0 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Modular Transmitter Application Company name: EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED FCC ID: 2AWY6-EAI8800DCT Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v04r02”; and FCC KDB 996369 D03 “OEM Manual v01r01”. In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Certification Guide v04r02”, FCC ID 2AWY6-EAI8800DCT has been examined against the following requirements. Item Requirement per 15.212 and KDB 996369 D01 Y/N Explanation from Grantee (Explain why product complies/how it is achieved) 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. YES The radio elements have the radio frequency circuitry shielded 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. YES The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. 3 The modular transmitter must have its own power supply regulation. YES The module has a voltage regulator circuit. 4 The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. YES The antenna permanently attached Modular 5 The modular transmitter must be tested in a stand- alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see § 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during YES The demonstrates compliance in a stand-alone configuration. EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED FCC Modular Approval Request Rev 4.0 testing shall be unmodified and commercially available (see § 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. The instruction on the labelling rule of the end product has been stated in the Users manual of this module. Please also see the exhibition Label Sample. 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The modular transmitter complies with any specific rules or operating requirements. 8 Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in §§ 1.1307(b), 1.1310, 2.1091, and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of modular transmitters under this section must contain a statement confirming compliance with these requirements. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Technical information showing the basis for this statement must be submitted to the Commission upon request. The module complies with RF exposure requirements. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules 2.3 Summarize the specific operational use conditions 2.4 Limited module procedures 2.5 Trace antenna designs 2.6 RF exposure considerations 2.7 Antennas 2.8 Label and compliance information 2.9 Information on test modes and additional testing requirements 2.10 Additional testing, Part 15 Subpart B disclaimer 2.11 Note EMI considerations 2.12 How to make changes YES YES YES page 13 page 13 page 13 page 13,4 page 14 page 14,5 page 15 page 15 page 16 page 16 page 16,7 EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED FCC Modular Approval Request Rev 4.0 Name: Zilong Lai Date: 2025-09-08 Title: manager Signature of applicant

EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025/08/28 Subject; Request for Confidentiality FCC ID: 2AWY6-EAI8800DCT To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Zilong Lai EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Title: Manager Email: [email protected]

Letter of Authorization Company: EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Address: Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Product Name: WIFI Module Model Number: EL.AIC8800D-CWFT FCC Identifier: 2AWY6-EAI8800DCT We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Zilong Lai Date: 2025.08.28 Title: Manager Signature of applicant:

*11.85 EL.-CWFTAIC8800D FCC ID:2AWY6-EAI8800DCT EXPRESS LUCK INDUSTRIAL IC:26332-EAI8800DCT (SHENZHEN)LIMITED

FCC ID: 2AWY6-EAI8800DCT RF EXPOSURE EVALUATION According to FCC 1.1310 and KDB 447498 D01 V06, The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d G P * * 30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result BT: Operation Frequency: 2402-2480MHz, Power density limited: 1mW/ cm 2 Power density limited: 1mW/cm Antenna Type: PCB Antenna Antenna :-2.27dBi R=20cm mW=10^(dBm/10) conducted power Evaluation result (dBm) (mW) (dBi) Numeric 2402 10.02 10±1 11 12.589 -2.27 0.59 0.0015 2441 10.2 10±1 11 12.589 -2.27 0.59 0.0015 2480 10.03 10±1 11 12.589 -2.27 0.59 0.0015 2402 10.02 10±1 11 12.589 -2.27 0.59 0.0015 2441 10.23 10±1 11 12.589 -2.27 0.59 0.0015 2480 10.04 10±1 11 12.589 -2.27 0.59 0.0015 2402 10.14 10±1 11 12.589 -2.27 0.59 0.0015 2441 10.35 10±1 11 12.589 -2.27 0.59 0.0015 2480 7.02 10±1 11 12.589 -2.27 0.59 0.0015 2402 10.62 10±1 11 12.589 -2.27 0.59 0.0015 2440 10.72 10±1 11 12.589 -2.27 0.59 0.0015 2480 9.76 10±1 11 12.589 -2.27 0.59 0.0015 2402 9.82 10±1 11 12.589 -2.27 0.59 0.0015 2440 10.35 10±1 11 12.589 -2.27 0.59 0.0015 2480 10.11 10±1 11 12.589 -2.27 0.59 0.0015 BLE（2M） GFSK Antenna Gain Channel Freq. (MHz) Max 8-DPSK GFSK (mW/cm2 ) modulation π/4- DQPSK Mode tune-up power Tune-up power (dBm) (dBm) GFSK BT BT BT BLE （ 1M ） 2.4G WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, WIFI 802.11n HT40:2422-2452MHz Power density limited: 1mW/ cm 2 Power density limited: 1mW/cm Antenna Type: Antenna : PCB Antenna 2.4G WIFI Antenna :1.09dBi; R=20cm mW=10^(dBm/10) WLAN2.4G Max power MODE conducted power Evaluation result (dBm) (mW) (dBi) Numeric Ant 1 2412 15.86 15±1 16 39.811 1.09 1.29 0.0102 Ant 1 2437 14.98 15±1 16 39.811 1.09 1.29 0.0102 Ant 1 2462 14.66 15±1 16 39.811 1.09 1.29 0.0102 Ant 1 2412 14.96 14±1 15 31.623 1.09 1.29 0.0081 Ant 1 2437 14.46 14±1 15 31.623 1.09 1.29 0.0081 Ant 1 2462 14.2 14±1 15 31.623 1.09 1.29 0.0081 Ant 1 2412 13.05 13±1 14 25.119 1.09 1.29 0.0064 Ant 1 2437 12.27 13±1 14 25.119 1.09 1.29 0.0064 Ant 1 2462 12.06 13±1 14 25.119 1.09 1.29 0.0064 Ant 1 2422 12.57 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2437 12.05 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2452 12.18 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2412 11.35 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2437 12.56 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2462 12.29 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2422 12.71 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2437 12.06 12±1 13 19.953 1.09 1.29 0.0051 Ant 1 2452 12.36 12±1 13 19.953 1.09 1.29 0.0051 802.11ax2 0 802.11ax4 0 Antenna Gain Antenna tune-up power Tune-up power (dBm) (dBm) Channel Freq. (MHz) Max 802.11n20 802.11n40 802.11g 802.11b (mW/cm2 ) modulation SIMULTANEOUS TRANSMISSIONS When a number of sources at different frequencies, and/or broadband sources, contribute to the total exposure, it becomes necessary to weigh each contribution relative to the MPE. To comply with the MPE, the fraction of the MPE in terms of E 2 , H 2 (or power density) incurred within each frequency interval should be determined and the sum of all such fractions should not exceed unity. In order to ensure compliance with the MPE for a controlled environment, the sum of the ratios of the power density to the corresponding MPE should not exceed unity. That is Max. SIMULTANEOUS TRANSMISSIONS for BT Module + Wi-Fi Module Standalone Standalone Evaluation result Power density Limits Evaluation result Wi-Fi 2.4G 0.0102 1 BT 0.0015 1 Verdict PASS Band ANT 0.011700 (mW/cm2) (mW/cm2 ) raio BT + Wi-Fi Module Simultaneous Limits 1 Conclusion: For the max result : 0.0109< 1.0, SAR is not required. Signature: Date: 2025-08-29 NAME AND TITLE (Please print or type): Alex Li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China

Report No.: N25061601610E Version.1.3 Page 1 of 75 RADIO TEST REPORT FCC ID: 2AWY6-EAI8800DCT Product: WIFI Module Trade Mark: N/A Model No.: EL.AIC8800D-CWFT Family Model: N/A Report No.: N25061601610E Issue Date: Aug. 20, 2025 Prepared for EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-2320 0050 Website: http://www.ntek.org.cn Report No.: N25061601610E Version.1.3 Page 2 of 75 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 8.1 1M .................................................................................................................................................................. 34 8.2 2M .................................................................................................................................................................. 55 Report No.: N25061601610E Version.1.3 Page 3 of 75 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Address ....................................... : Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Manufacturer's Name .................. : EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Address ....................................... : Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Product description Product name .............................. : WIFI Module Trade Mark .................................. : N/A Model and/or type reference ...... : EL.AIC8800D-CWFT Family Model ............................... : N/A Test Sample number ................... : S2506180011-2# Date (s) of performance of tests .................. : Jun. 18, 2025 ~ Aug. 20, 2025 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing T…

Text truncated - open the document above for the full version.

Report No.: N25061601611E Version.1.3 Page 1 of 111 FCC RADIO TEST REPORT FCC ID: 2AWY6-EAI8800DCT Product: WIFI Module Trade Mark: N/A Model No.: EL.AIC8800D-CWFT Family Model: N/A Report No.: N25061601611E Issue Date: Aug. 20, 2025 Prepared for EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. No. 24 Xinfa East Road, Xiangshan Community, Xinqiao Street, Baoan District, Shenzhen, Guangdong, People's Republic of China Tel. 0755-23200050 Website: http://www.ntek.org.cn Report No.: N25061601611E Version.1.3 Page 2 of 111 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 28 7.4 DUTY CYCLE ............................................................................................................................................... 30 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 31 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 33 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 35 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 37 7.9 ANTENNA APPLICATION .......................................................................................................................... 38 8 TEST RESULTS ................................................................................................................................................... 39 8.1 DUTY CYCLE .................................................................................................................................................. 39 8.2 MAXIMUM CONDUCTED OUTPUT POWER ....................................................................................................... 49 8.3 -6DB BANDWIDTH .......................................................................................................................................... 50 8.4 OCCUPIED CHANNEL BANDWIDTH .................................................................................................................. 60 8.5 MAXIMUM POWER SPECTRAL DENSITY LEVEL ............................................................................................... 70 8.6 BAND EDGE .................................................................................................................................................... 80 8.7 CONDUCTED RF SPURIOUS EMISSION ............................................................................................................. 93 Report No.: N25061601611E Version.1.3 Page 3 of 111 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Address ....................................... : Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Manufacturer's Name .................. : EXPRESS LUCK INDUSTRIAL（SHENZHEN）LIMITED Address ....................................... : Floor1, Workshop1, No.88, South Baotong Road, Xikeng Community, Yuanshan Street, Longgang District, Shenzhen, GuangDong, China Product description Product name .............................. : WIFI Module Model and/or type reference ..... : EL.AIC8800D-CWFT Family Model ............................... : N/A Sample number S2506180011-2# Date of Test Jun. 18, 2025 ~ Aug. 20, 2025 M…

Text truncated - open the document above for the full version.

Report No.: N25061601611E Version.1.3 Page 59 of 111 -6dB Bandwidth NVNT ax40 2437MHz Ant1 -6dB Bandwidth NVNT ax40 2452MHz Ant1 Report No.: N25061601611E Version.1.3 Page 60 of 111 8.4 OCCUPIED CHANNEL BANDWIDTH Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT b 2412 Ant1 12.138 NVNT b 2437 Ant1 12.168 NVNT b 2462 Ant1 12.048 NVNT g 2412 Ant1 16.552 NVNT g 2437 Ant1 16.552 NVNT g 2462 Ant1 16.567 NV…

Text truncated - open the document above for the full version.