2AXA8-GBP-3001GBP-3001

Applicant Declaration Applicant Legal Business Name Trackonomy Systems, Inc. Address 214 Devcon Dr, San Jose, California 95112 FRN 0029378411 Grantee Code 2AXA8 FCC ID 2AXA8-GBP-3001 Authorized Contact Name Nivedita Manohar Contact Email [email protected] Contact Phone 1-833-872-2566 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicantshallmake provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicantshall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs:https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs:https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100:https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List:Covered List ☒ Trackonomy Systems, Inc.(“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. ☒ Trackonomy Systems, Inc.(“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to§1.50002, as an entity producing “covered” equipment. Applicant Signature:Date:05/05/2024 Print Name: Nivedita Manohar Title: Certification Manager QSF27-14-04 Rev 1.1 Jan 17, 2024Page 1 of 2 Original Issue: Jan. 4, 2021 ApplicantDeclaration *NOTE:ThisdeclarationcannotbesignedbyanAgent,itshallbesignedbyanauthorizedpersonlistedintheFCCdatabase QSF27-14-04Rev1.1Jan17,2024Page2of2OriginalIssue:Jan.4,2021

Trackonomy Systems, Inc. | 214 Devcon Drive, San Jose, CA 95112 | www.trackonomy.com Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to 47 CFR part §2.911(d)(7) of the FCC rules To whom it may concern, This letter is to certify that Trackonomy Systems, Inc. (“Applicant”) accepts responsibilities to act as its own agent pursuant to 47 CFR part §2.911(d)(7) of the FCC rules for service of process. I consent to the obligation to accept service of process on behalf of the Applicant for all certification applications to the FCC. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of any commission-related proceeding involving the equipment and agree to immediately notify the FCC and SGS North America Inc if there is any change in the status identified above. Applicant Company Name : Trackonomy Systems, Inc. Contact Name : Nivedita Manohar, Certification Manager Address : 214 Devcon Drive San Jose, CA 95112, USA Telephone No : 1-833-872-2566 Email : [email protected] Applicant FRN : 0029378411 Signature: Date: May 10, 2024

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Trackonomy Systems, Inc. 214 Devcon Dr, San Jose, California, 95112 United States Regarding: Confidentiality Request regarding application for FCC ID2AXA8-GBP-3001 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Parts List / BOM Tune Up Procedure Internal Photos User manual(s) The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Test Setup Photos Sincerely, Nivedita Manohar Certification Manager Trackonomy Systems, Inc.

Date: May 31, 2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: 2AXA8-GBP-3001 To whom it may concern: We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This authorization is valid until further written notice from the applicant. Sincerely, Signature: ____________________ Printed Name: Nivedita Manohar Title: Certification Manager Company Name: Trackonomy

Cover Letter Date: June 28, 2024 Dear Examiner, This letter attests that the FCC guidance in KDB 996369 D02 Question 1 and KDB 996369 D04 for integrating modular transmitters into host equipment was followed for the preparation of this application under FCC ID: 2AXA8-GBP-3001 The equipment has included certified transmitter modules below 1. LTE module FCC ID: XMR202008EC25AFXD approved on August 6, 2020 by using change in FCC ID from XMR201909EC25AFX approved on Sep. 30, 2019. 2. RFID module FCC ID: 2AQ9M-SIM7100 approved on June 14, 2024 by using change in FCC ID from 2AQ9M-SIM7100E approved on April 15, 2024 as C2PC based on the original approval date: December 2, 2022 3. WiFi Module FCC ID: 2AKZA-QCA9377 approved on September 28, 2018 Changes from the module grant conditions as below. a) The certified modular transmitters are integrated in this host without any change on the hardware design. b) Operating frequency 788~798MHz of LTE B14, Bluetooth classic and the WiFi 2.4GHz are disabled via software. c) RF exposure information and EMC evaluation are provided to verify that original test results represent compliance for the integration of transmitter modules under new conditions of this application. d) Antenna types and peak gains used in the host are different from the original module test report and have been evaluated as compliant to FCC rules. Original New Mode Frequency(MHz) Type Peak Gain(dBi)TypePeak Gain(dBi) WCDMA B2 1852.4 1907.6 Dipole4 Radome Screw Mount 5 WCDMA B4 1712.4 1752.6 Dipole4 5 WCDMA B5 826.4 846.6 Dipole4 2.5 LTE 2 1850 1915 Dipole4 5 LTE 4 1710 1755 Dipole4 5 LTE 5 824 849 Dipole4 2.5 LTE 12 699 716 Dipole4 2.5 LTE 13 777 787 Dipole4 2.5 LTE 66 1710 1780 Dipole4 5 LTE 71 663 698 Dipole4 2.5 BLE 2.4GHz Dipole4 4.2 802.11a 5GHzDipole66.4 802.11n HT20 5GHzDipole66.4 802.11n HT40 5GHzDipole66.4 802.11ac VHT80 5GHzDipole66.4 LoRa 902.75 927.25 External3.04Panel, Low Profile 8 e) The original test report exhibitions have been submitted to represent test result under the new conditions. FCC ID Equipment class Report Number Rule Part Exhibit Type XMR202008EC25AFXD XMR201909EC25AFX (Change In FCC ID) PCB R1907A0408-R1V1Part 22 Test report R1907A0408-R2V1Part 24 Test report R1907A0408-R3V1Part 27 Test report Test Setup Photos N/A Test Setup Photos EUT Photos N/A EUT photos 2AQ9M-SIM7100E 2AQ9M-SIM7100 (change ID) DSS 18220WC20246301 Part 15.247 Test report 18220WC40046901 (For C2PC) Part 15.247 Test report C2PC letter N/A Cover letter Test Setup photos N/A Test Setup photos EUT Photos N/A EUT Photos 2AKZA-QCA9377 DTS T180627D11-RP2 Part 15.247 Test report NII T180627D11-RP4 Part 15.407 Test report DSS, DTS, NII Test Setup photos N/A Test Setup photos DSS, DTS, NII EUT photos N/A EUT photos Sincerely yours, Printed Name: Jim Chang Title: RF Manager Company Name: SGS Taiwan Ltd.

To whom it may concern, We, Trackonomy Systems, Inc. request Long-Term Confidentiality for “internal photos” and “user manual” for FCC application of our product GBP-3001 with FCC ID: 2AXA8-GBP-3001. Below are the detail justifications: 1. The ‘user manual’ and ‘internal photos’ of the product contain highly confidential and proprietary information. 2. The GBP-3001 product is not user serviceable and can only be installed and serviced by authorized and trained professionals and users are not allowed to disassemble the product. Trackonomy offers support services for the entire life cycle of the product including service to requirements for decommissioning and sunsetting to keep essential infrastructure working smoothly using this product. 3. All sales for these devices must be under an NDA restricting the disclosure of the proprietary information, including internal photos and user manual. 4. User manual contains proprietary technical information intended for professional technicians obligated under an NDA. 5. All sales of the non-consumer device will be under an NDA to include third party sales and that the final user of the device is subject to the NDA. 6. The GBP-3001 product and its subassemblies are integrated using Trackonomy proprietary integration process. 7. All points mentioned above in our support letter document allow for the provision of claiming long term confidentiality based on FCC KDB number 726920. Based on this we qualify and are requesting for long term confidentiality. Nivedita Manohar Certification Manager Date: 0 6 /24/2024

FCCClassIIPCrequestletterRev1.1 BeijingSilionTechnologyCorp.,LTD. April1,2024 FederalCommunicationsCommission EquipmentAuthorizationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Attn:OETDept. Ref:FCCClassIIPermissivechangeforFCCID:2AQ9M-SIM7100E Applicant:BeijingSilionTechnologyCorp.,LTD. DearExaminer, ThisistorequestaClassIIPermissivechangeforFCCID:2AQ9M-SIM7100E originallygrantedon12/02/2022(date). Themajorchangefiledunderapplicationis: 1.Changethemodelnameto“SIM7100,SIM3100,SIM5100”. 2.Changeafewpartsofthemainboard. OriginalNew Iattestthatthecertifieddevicewillnotbecapableofad-hocmodeoperation outsideofthegrantconditions. FCCClassIIPCrequestletterRev1.1 Sincerely, Signature CaiRuohua VPofOperation BeijingSilionTechnologyCorp.,LTD.

1 STATEMENT The label is affixed on an immovable part of the front side of the device. Placing the Part 15.19 statements on the device cannot be done without ruining the aesthetics, which would impact revenue, the statement is specified in user manual. 2 LABEL LOCATION FCC ID: 2AXA8-GBP-3001

Test Report Number: 208745-9 Rev:1 Page: 1 of 7 Remarks: This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com//en/Terms-and-Conditions.aspx. And for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for a maximum of 30 days only. RF Exposure Report Report Number: 208745-9 Revision Level: 1 Client: Tractotomy Systems, Inc. 214 Devcon Dr. San Jose, CA 95112 Equipment Under Test: Multifunctional IoT Platform Sensor Device Model Number: GBP-3001 FCC ID: 2AXA8-GBP-3001 Applicable Standards: 47 CFR § 2.1091 FCC KDB 447498 D01 General RF Exposure Guidance v06 Report issued on: June 25, 2024 Result: Compliant FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER: 1935.01 Report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Prepared b y: Andreas Gillmeier, Sr. Engineer, Wireless Reviewed by: Alex Chang, Sr. Regulatory Laboratory Manager – EMC/RF TABLE OF CONTENTS Test Report Number: 208745-9 Rev:1 Page: 2 of 7 SGS North America Inc. Connectivit y & Products 12310 World Trade Drive, Suite 106-107, San Diego, CA 92128t (858) 592-7100 www.sgs.com Member of the SGS Group (SGS SA) 1 GENERAL INFORMATION ............................................................................................................................................. 3 1.1 CLIENT INFORMATION ................................................................................................................................................... 3 1.2 TEST LABORATORY ....................................................................................................................................................... 3 1.3 GENERAL INFORMATION OF EUT .................................................................................................................................. 3 1.4 OPERATING MODES AND CONDITIONS........................................................................................................................... 3 2 RF EXPOSURE ................................................................................................................................................................... 4 2.1 TEST RESULTS ............................................................................................................................................................... 4 2.2 TEST METHOD ............................................................................................................................................................... 4 2.3 LIMITS ........................................................................................................................................................................... 5 2.4 SINGLE TRANSMISSION RF EXPOSURE LEVELS (MW/CM2) ............................................................................................ 6 2.5 SIMULTANEOUS CONDITIONS ........................................................................................................................................ 6 3 REVISION HISTORY ........................................................................................................................................................ 7 Test Report Number: 208745-9 Rev:1 Page: 3 of 7 SGS North America Inc. Connectivit y & Products 12310 World Trade Drive, Suite 106-107, San Diego, CA 92128t (858) 592-7100 www.sgs.com Member of the SGS Group (SGS SA) 1 General Information 1.1 Client Information Name: Trackonomy Systems, Inc. Address: 214 Devcon Dr. City, State, Zip, Country: San Jose, CA 95132 1.2 Test Laboratory Name: SGS North America, Inc. Address: 12310 World Trade Drive, Suite 106/107 Cit y, State, Zip, Country: San Diego, CA 92128, USA Accrediting Body: A2LA Type of lab: Testing Laboratory Certificate Number: 1935.01 Desi gnation ID US1346 CAB ID: US0236 1.3 General Information of EUT Type of Product: Multifunctional IoT Platform Sensor Device Model Number: GBP-3001 Serial Number: 20134 Technology Freq. Range (MHz) Antenna Model Antenna Type Antenna Gain (dBi) Max Conducted Power (dBm) LoRa 902-928 BBT- 09PA08C065 Panel, Low Profile 8 (Peak Max ) 26.85 (Peak) WiFI 5GHz U-NII-1 5150-5250 2J6C86BCFc Radome - Screw Mount 6.4 (Peak Max) 16.5 (Avg) WiFI 5GHz U-NII-3 5725-5835 2J6C86BCFc Radome - Screw Mount 6.4 (Peak Max) 15.77 (Avg) *Data was not measured by SGS laboratory and therefore SGS is not responsible for accuracy. Data obtained via customer, specification sheet, previous filin g or other. 1.4 Operating Modes and Conditions Maximum power levels were utilized for all calculations. Test Report Number: 208745-9 Rev:1 Page: 4 of 7 SGS North America Inc. Connectivit y & Products 12310 World Trade Drive, Suite 106-107, San Diego, CA 92128t (858) 592-7100 www.sgs.com Member of the SGS Group (SGS SA) 2 RF Exposure 2.1 Test Results Test Description Product …

Text truncated - open the document above for the full version.

Test Report Number: 208745-4 Rev:1 Page: 1 of 26 Remarks: This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com//en/Terms-and-Conditions.aspx. And for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/terms-e-document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful, and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for a maximum of 30 days only. RF Test Report Report Number: 208745-4 Revision Level: 1 Client: Trackonomy Systems, Inc. 214 Devcon Dr. San Jose, CA 95112 Equipment Under Test: Multi-Functional IoT Platform Sensor Gateway Model: GBP-3001 FCC ID: 2AXA8-GBP-3001 Applicable Standards: FCC Part 15 Subpart C, § 15.247 ANSI C63.10:2013 Report issued on: June 25, 2024 Test Result: Compliant FOR THE SCOPE OF ACCREDITATION UNDER CERTIFICATE NUMBER: 1935.01 This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Prepared by: Alex Chang, Sr. EMC/RF Regulatory Lab Manager Reviewed by: Andreas Gillmeier, Sr. Engineer, Wireless Test Report Number: 208745-4 Rev:1 Page: 2 of 26 SGS North America Inc. Connectivity & Products 12310 World Trade Drive, Suite 106/107, San Diego, CA 92128t (858) 592-7100 www.sgs.com Member of the SGS Group (SGS SA) Table of Contents 1 SUMMARY OF TEST RESULTS ..................................................................................................................................... 3 1.1 MODIFICATIONS REQUIRED FOR COMPLIANCE .............................................................................................................. 3 2 GENERAL INFORMATION ............................................................................................................................................. 4 2.1 CLIENT INFORMATION ................................................................................................................................................... 4 2.2 TEST LABORATORY ....................................................................................................................................................... 4 2.3 GENERAL INFORMATION OF EUT .................................................................................................................................. 4 2.4 OPERATING MODES AND CONDITIONS........................................................................................................................... 5 2.5 EUT CONNECTION BLOCK DIAGRAM – RADIATED MEASUREMENTS ............................................................................ 5 2.6 SYSTEM CONFIGURATIONS ............................................................................................................................................ 5 3 RADIATED SPURIOUS EMISSIONS.............................................................................................................................. 9 3.1 TEST RESULT ................................................................................................................................................................. 9 3.2 TEST METHOD ............................................................................................................................................................... 9 3.3 TEST DATE AND TEST ENGINEER(S) .............................................................................................................................. 9 3.4 TEST SITE ...................................................................................................................................................................... 9 3.5 TEST EQUIPMENT ........................................................................................................................................................ 10 3.6 TEST DATA – RADIATED SPURIOUS EMISSION ............................................................................................................. 17 4 MEASUREMENT UNCERTAINTY .............................................................................................................................. 25 5 REVISION HISTORY ...................................................................................................................................................... 26 Test Report Number: 208745-4 Rev:1 Page: 3 of 26 SGS North America Inc. Connectivity & Products 12310 World Trade Drive, Suite 106/107, San Diego, CA 92128t (858) 592-7100 www.sgs.com Member of the SGS Group (SGS SA) 1 Summary of Test Results Test Description Test Specification Test Result Conducted Output Power 15.247(b)(3) Compliant Radiated Spurious Emissions 15.247(d), 15.209(a), 15.205(a) Compliant Note: Device used a pre-certified module; but different antenna. Output power spot check verified and reported in this report. The Radiated Spurious Emissions also preformed to ensure product still in compliance. 1.1 Modifications Required for Compliance None Test Report Number: 208745-4 Rev:1 Page: 4 of 26 SGS North America Inc. Conn…

Text truncated - open the document above for the full version.

The BBT-09PA08C065 from BBT Antennas is a RFID Antenna with Frequency 902 to 928 MHz, Gain 8 dBi, Horizontal Beamwidth 65 Degree, Vertical Beamwidth 70 Degree, Front to Back Ratio 15 dB. Tags: Panel, Low Profile. More details for BBT-09PA08C065 can be seen below. Product Details Part NumberBBT-09PA08C065 Manufacturer Name:BBT Antennas Address: No.7, Lianxin South Road, Yundonghai Street, Foshan City, Guangdong, China Description902 to 928 MHz, Directional RFID Antenna with 8 dBi Gain General Parameters TypePanel, Low Profile DirectionalityDirectional ApplicationRFID / NFC Indoor/OutdoorOutdoor Frequency BandUHF Band Frequency902 to 928 MHz PolarizationRHCP Gain8 dBi Horizontal Beamwidth65 Degree Vertical Beamwidth70 Degree Front to Back Ratio15 dB VSWR1.70:1 MountingPole Mount Impedance50 Ohms Dimension270 x 270 mm Rated Wind Velocity60 m/s Antenna Datasheet

ReportNo.:18220WC40046901FCCID:2AQ9M-SIM7100EPage1of20 Code:AB-RF-05-b FCCTestReport ClientName:BeijingSilionTechnologyCorp.,LTD. ClientAddress: 5Floor,BuildingA,No.3LongyuNorthSt., ChangpingDistrict,Beijing,102200,China ProductName:RFIDmodule ReportDate:Mar.28,2024 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC40046901FCCID:2AQ9M-SIM7100EPage2of20 Code:AB-RF-05-b Contents 1.GeneralInformation............................................................................................................................................5 1.1.ClientInformation....................................................................................................................................5 1.2.DescriptionofDevice(EUT)..................................................................................................................5 1.3.AuxiliaryEquipmentUsedDuringTest.................................................................................................6 1.4.DescriptionofTestModes......................................................................................................................6 1.5.DescriptionOfTestSetup......................................................................................................................7 1.6.TestEquipmentList.................................................................................................................................8 1.7.MeasurementUncertainty......................................................................................................................9 1.8.DescriptionofTestFacility.....................................................................................................................9 2.SummaryofTestResults.................................................................................................................................10 3.ConductedEmissionTest................................................................................................................................11 3.1.TestStandardandLimit........................................................................................................................11 3.2.TestSetup...............................................................................................................................................11 3.3.TestProcedure.......................................................................................................................................11 3.4.TestData.................................................................................................................................................11 4.RadiationSpuriousEmissionandBandEdge.............................................................................................14 4.1.TestStandardandLimit........................................................................................................................14 4.2.TestSetup...............................................................................................................................................14 4.3.TestProcedure.......................................................................................................................................15 4.4.TestData.................................................................................................................................................16 5.AntennaRequirement......................................................................................................................................19 5.1.TestStandardandRequirement.........................................................................................................19 5.2.AntennaConnectedConstruction.......................................................................................................19 APPENDIXI--TESTSETUPPHOTOGRAPH.........................................................................…

Text truncated - open the document above for the full version.