2AXTH-MG16-2Qi2 25W Magnetic Wireless Car Charger

LED 智能指示灯 包 装 为了您的权益，请您认真填写，并妥善保管，作为维前凭证！ 请勿擅自修改内容，否则视为作废。 本公司保留对该产品售后服务条例的最终解释权。 本产品三包有效期：自购买日起（以寄回的客户回执或购机发 票日期为准），提供12个月保修服务，其它附件（如包装等） 不属三包范围，产品外观为人为损坏，附件损失，不在三包之 列。不在三包之内或超过三包期的产品，客户仍享受维修服务 ，但需要交纳维修工本费。 保 修 使用说明 产品规格 注意事项 MG16 QI2.2 版本 Version QI2.2 使用说明书 功能组件 安装说明 手机无线充电区域散热风扇 将螺母扣在夹球头上 拧紧螺母 将球头卡入卡槽 旋转尾夹锁紧出风口叶片 1 12 34 1 2 Type-c 接口 充电指示灯 4 4 3 3 触摸灯按钮 球头螺帽 出风口夹片 5 6 5 7 6 旋转锁紧尾夹 8 7 2 8 1、把该产品与配件通过球头螺帽装配并旋紧（可兼容其他球头 直径17mm配件），并固定在理想位置。用数据线把产品与 QC3.0车充 （选配）连接，并插入点烟器取电。 2、该产品通电后，绿灯常亮等待放置手机；放上手机后磁吸力 自动吸住手机，且线圈对准。产品会启动无线充电，充电状态 LED灯呼吸；如果手机不支持无线充电或者检测到金属异物，指 示灯闪烁5秒后灯灭。本 产品最大充电功率为25W，充电效率根 据充电环境和手机会有所不同。 3、无线充的最佳距离是4mm以内并不能穿透金属，所以需要 避免用金属的或太厚的（大于4mm）手机保护壳，这样才能 保证手机快速的无线充电。 4、从产品上取下手机后，指示灯即刻常亮待机状态。停车熄火, 产品停止供电时，指示灯熄灭，手机依旧被磁力吸附在产品上, 可随时取下。 出风口支架 根据出风口叶片位置调整好出风口顶片和可旋转夹子组件的位置, 插入叶片，根据叶片厚度选择锁紧开关档位；适用于大部分汽车出 风口一键锁紧。硅胶接触汽车，更紧更贴合更好保护汽车不刮伤。 1.智能手机非磁吸手机，请增加引磁环后使用该产品。 2.请勿过度挤压或碰撞设备。 3. 请勿与带磁条或者芯片的磁卡（身份证、银行卡等）放置太近, 避免造成磁卡失效。 磁吸无线充*1 出风口夹子*1 Type-C 充电线*1 说明书*1 产品名称：MG16 输入电压：5V-3A/9V-3A/12-3A/15-3A 输出功率：5W/7.5W/10W/15W/25W 工作温度: 0～40°C 工作频率：360KHz 充电距离：≤4mm 磁铁吸力：1.6KG 适用手机：iPhone 12 / 13 / 14 / 15/ 16/ 17系列 ，以及其他支持 无线充并具有Magsafe连接条件（搭配Magsafe磁吸壳或者铁环) 的手机 温馨提示： 以上小型圆形款式的出风口,夹子不能适配。 万向旋转球头 出风口挡片 旋转调节夹子开合 深入出风口内部夹片 产品保修卡 MG16 USER MANUAL 12 34 1 4 3 5 6 5 7 6 8 7 2 8 1.Assemble and tighten the product and the accessories through the ball head nut (compatible with other ball head diameter 17mm accessories), and fix in the ideal position. Connect the product with a QC3.0 car charger (optional) with the cable, and plug in the cigarette lighter to take power. 2.After the product is powered on, the indicator light will turn on and wait for the phone to be placed. After placed the phone, the magnetic suction force automatically absorbs the phone, and the coil is aligned. The product will start wireless charging, the indicator light is on for breathing effect; If the phone doesn't support wireless charging or if it detects a metal foreign object, the light flashes alternately for 5 seconds and then goes off. The maximum charging power of this product is 25W, and the charging efficiency will vary according to the charging environment and mobile phone. Adjust the position of the top piece of the air outlet and the rotatable clip assembly according to the position of the air outlet blade; insert the blade and select the lock switch position according to the thickness of the blade; suitable for one-key locking of the air outlet of most cars. Silicone touches the car, tighter and fits better to protect the car from scratches. 1. For smartphones that are not magnetic, please add a magnetic ring before using this product. 2. Do not over squeeze or collide with the equipment. 3. Please do not place it too close to the magnetic card (ID card, bank card, etc.) with magnetic stripe or chip to avoid magnetic card failure. Wireless charger*1 Air vent mount*1 Type-C cable*1 User manual*1 Model：MG16 Input：5V-3A/9V-3A/12-3A/15-3A Output power：5W/7.5W/10W/15W/25W Working temperature: 040 Charging frequency：360KHz Induction distance：≤4mm Magnetic attraction：1.6KG Compatible phones: iPhone 12-17 series and other mobile phones that support wireless charging and have Magsafe connection conditions (with Magsafe cases or metal ring) Functional component 1 2 4 3 Wireless Charging Area Charging indicator light Type-C interface Light Switch Fasten the nut on the clamp ball Tighten the nut Snap the ball into the slot Rotate the tail clamp to lock the air outlet blades Cooling fan Screw Cap Rotary locking tail clamp Air outlet clip Working Process Lighting mode Direction for use 3.The best distance of wireless charging is within 4mm, and it cannot penetrate metal, so it is necessary to avoid using metal or too thick (over 4mm) mobile phone case, so as to ensure fast wireless charging of mobile phone. 4.After the phone is removed from the product, the indicator will immediately show the standby status . When the car engined off and the power supply stops, the indicator light goes off. The mobile phone is still attached to the product by magnetic force and can be taken off at any time. Air vent mount A ball head that can be rotated at will Adjust the clip opening and closing by rotating. Upper and lower support plate A clip that goes deep into the air vent. Not suitable for circle air vent! Caution Product specification Package Warranty For your rights and interests, please fill in carefully and keep it properly as a pre maintenance voucher! Do not modify the content without authorization, otherwise it will be deemed invalid. The company reserves the final right to interpret the after-sales service regulations of the product. Product Warranty Card The three guarantee period of this product: from purchasing date (Prevail to the customer receipt date or invoice date), provide 12 months guarantee. product surface man-made damage,accessories missed are not include in this guarantee, repair service for the product is out of the guarantee period or not covered by warranty ,customer need to pay the repair charge. 模式 通电 待机 充电 充满 彩灯慢转，风扇转动10S停止工作 彩灯慢转,常亮 灯熄灭，风扇工作 灯熄灭，风扇停止工作 检测到异物红灯快闪5秒后熄灭 触摸按键双击切换灯光（七彩、绿色、蓝色、橙色、 紫色）长按关闭/打开灯光和风扇 指示灯 Standby Charging Full Foreign object detected The red light flashes for 5 seconds and then goes off Touch button Double click to switch lights (rainbow, green, blue, orange, purple), long press to turn off/on lights and fans The colored light rotates slowly, and the fan stops working after 10 seconds of rotation RGB lights rotate slowly; single-color lights remain on The light goes out and the fan is working The light goes out and the fan stops working ModeIndicator light Power on FCC warning statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energ…

Text truncated - open the document above for the full version.

Shenzhen Caibo Technology Co., Ltd. December 29, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2AXTH-MG16-2 [Shenzhen Caibo Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Linjun Hu Shenzhen Caibo Technology Co., Ltd. December 29, 2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2AXTH-MG16-2 [Shenzhen Caibo Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Linjun Hu

Shenzhen Caibo Technology Co., Ltd. Difference Description We Shenzhen Caibo Technology Co., Ltd. state: Product name: Qi2.2 3in1 wireless charger stand Model(s): MG16-2.2, VENDICT, VDT-QI3B, VDT-QI3W, VDT-3, VBT-3, T233-G, SQ1C3, C25 All the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: December 29, 2025 Name: Linjun Hu Position: CEO Company Name: Shenzhen Caibo Technology Co., Ltd. Address: F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen, China Tel: 86-755 88850135 Fax: 86-755 88850136 Email: [email protected]

Shenzhen Caibo Technology Co., Ltd. 12/29/2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product Name: Qi2 25W Magnetic Wireless Car Charger FCC ID: 2AXTH-MG16-2 Model(s): MG16-2.2 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Schematic Diagram, Block Diagram, Operational Description) required to be submitted with this application be permanently withheld from public review. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market Please contact me if there is any information you may need. Sincerely, Signature: December 29, 2025 Name Linjun Hu Position CEO Company Name Shenzhen Caibo Technology Co., Ltd. Address F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen, China Tel 86-755 88850135 Fax 86-755 88850136 Email [email protected]

Shenzhen Caibo Technology Co., Ltd. 12/29/2025 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen PSI Testing Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This agreement expires one year from the current date. Sincerely, Signature: December 29, 2025 Name Linjun Hu Position CEO Company Name Shenzhen Caibo Technology Co., Ltd. Address F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao'an District, Shenzhen, China Tel 86-755 88850135 Fax 86-755 88850136 Email [email protected]

Page 1 of 4 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix II external photos FCC ID: 2AXTH-MG16-2 Page 2 of 4 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 3 of 4 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Page 4 of 4 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------

Label and Location Material: Silk-screen Font color: White Size: L: 1cm*W: 0.4cm Label and Location W FCC ID: 2AXTH-MG16-2 Model No.: MG16-2.2 L

Page 1 of 2 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix III internal photos FCC ID: 2AXTH-MG16-2 Page 2 of 2 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China ------End------

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 12 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2AXTH-MG16-2 On Behalf of Shenzhen Caibo Technology Co., Ltd. Qi2 25W Magnetic Wireless Car Charger Model No.: MG16-2.2, VENDICT, VDT-QI3B, VDT-QI3W, VDT-3, VBT-3, T233-G, SQ1C3, C25 Prepared for : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China Report Number : psi2512024-C01-R06 Date of Receipt : December 5, 2025 Date of Test : December 5, 2025- December 22, 2025 Date of Report : December 22, 2025 Version Number : V0 Page 2 of 13 Report No.: psi2512024-C01-R06 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Page 1. Test Result Summary ................................................................................................................................ 5 2. EUT Description ......................................................................................................................................... 6 2.1. DESCRIPTION OF DEVICE (EUT) ............................................................................................................. 6 2.2. ACCESSORIES OF DEVICE (EUT) ............................................................................................................ 7 2.3. TESTED SUPPORTING SYSTEM DETAILS ................................................................................................. 7 2.4. BLOCK DIAGRAM OF CONNECTION BETWEEN EUT AND SIMULATORS ....................................................... 7 2.5. DESCRIPTION OF TEST MODES ............................................................................................................... 7 2.6. TEST CONDITIONS ................................................................................................................................. 8 2.7. TEST FACILITY ...................................................................................................................................... 8 2.8. MEASUREMENT UNCERTAINTY ............................................................................................................... 8 3. Test Results and Measurement Data ....................................................................................................... 9 3.1. RF EXPOSURE TEST ......................................................................................................................... 9 4. Photos of test setup ................................................................................................................................ 13 Page 3 of 13 Report No.: psi2512024-C01-R06 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China TEST REPORT DECLARATION Applicant : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Manufacturer : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China EUT Description : Qi2 25W Magnetic Wireless Car Charger (A) Model No. : MG16-2.2, VENDICT, VDT-QI3B, VDT-QI3W, VDT-3, VBT-3, T233-G, SQ1C3, C25 (B) Trademark : N/A Measurement Standard Used: FCC CFR 47 PART 1, FCC CFR 47 part1, 1.1307(b), 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Test Result: PASS The device described above is tested by Shenzhen PSI Testing Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The test results are contained in this test report and Shenzhen PSI Testing Co., Ltd. is assumed full responsibility for the accuracy and completeness test. Also, this report shows that the EUT is technically compliant with the KDB 680106 D01 requirements. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen PSI Testing Co., Ltd. Tested by (name + signature).............: Jensen Wang Test Engineer Approved by (name + signature).......: Simple Guan Project Manager Date of issue................................: December 22, 2025 Page 4 of 13 Report No.: psi2512024-C01-R06 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China Revision History Revision Issue Date Revisions Revised By REV0 December 22, 2025 Initial released Issue Jensen Wang Page 5 of 13 Report No.: psi2512024-C01-R06 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China 1. Test Result Summary Requirement CFR 47 Section Result RF EXPOSURE §1.1307(b)(1), §1.1310& KDB680106 PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is dec…

Text truncated - open the document above for the full version.

Page1of 5 东莞市德弗力五金电子材料有限公司 产品规格书 PRODUCT SPECIFICATION 客 户： CUSTOMER:____________________________________________________________________ 客户料号： CUST P/N:____________________________________________________________________ 德弗力料号： K C P/N:____________________________________________________________________ 产品型号： 20.5*39*33*0.08mm*80P*11TS D E S E : 日 期： 2024.12.24 D A T E :____________________________________________________________________ 版 本： A.0 VERSION :____________________________________________________________________ （客户承认受领印）ACCEPTANCE STAMP 拟制跟单员 PREPARED BY 曾小仙 Address:东莞市石碣镇新风西路107号Tel：86-076986016320 Http://www.hartai.com Fax：86-076986372427 MERCHANDISER 工程审核 ENGINEER CHECKED BY 批准 APPROVED BY 邱志辉 ZLGD 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD ZLGD-Y20.5*39-33-FR ZLGD-0447 版本 Rev. A.0 变更前 Before Change -- 变更后内容 DESCRIPTION(Content Or Reason ForChanged) 新发行（Initial Release） 日期 Date 修订者 Revisor 2024/12/24 曾小仙 拟制工程审核 PREPARED BY 曾小仙 ENGINEER CHECKED BY 邱志辉 版 本 变 更 履 历 Version Change History 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD Address:东莞市石碣镇新风西路107号Tel：86-076986016320 Http://www.hartai.com Fax：86-076986372427 客户料号： CUST P/N 德弗力料号： DFL P/N Page2of 5 ZLGD-Y20.5*39-50-FR ZLGD-0385 1.产品外形尺寸（OVERALL DIMENSIONS OF PRODUCTS): 2.单位(Unit):毫米(mm) A 42.5±0.5 J B 39±1.0 K C D 20.5±0.5 LM E N1/N2 F O G P HI 拟制工程审核 PREPARED BY 曾小仙 ENGINEER CHECKED BY 邱志辉 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD Address:东莞市石碣镇新风西路107号Tel：86-076986016320 Http://www.hartai.com Fax：86-076986372427 客户料号： CUST P/N 德弗力料号： DFL P/N 规 格 内 容 Specification 20±0.5 Page3of 5 33±2.0 3±2 1±0.2 47±1 A B D E F G H C 0.8±0.2 I 两引 线套 热缩 管 PE 膜 双 面 胶 ZLGD-Y20.5*39-33-FR ZLGD-0447 圈数 Turns 11TS 线径 Wire Dia. 0.08MM*80P热风线 （Silk-Covered Wire） 所有材料要求合格 ROHS 标准 绕线方式 疏/密 Wdg. Type Spred/Close 密绕（Close） 绕线方向 Wdg.Direction （Anticlockwise） 相交 是/否 Intersect Yes/Not 相交（Yes） 线圈 正/反贴 Coil Positive/Anti Paste （Anti/-Paste） 2.电气特性（ELECTRICAL CHARACTERISTICS): 温度 TEMPERATURE:25±10°C,湿度 RELATIVE HUMIDITY:65±10% 序号 NO. 1 2 3 项目 ITEM IND DCR 端子 TERMINAL S-F S-F Q 值 S-F 标准 SPECIFICATION 电感：7.9uH±0.3 阻值： Q 值：8.5以上 测试条件 TEST FREQUENCY 100kHz/V 100kHz/V 100kHz/V 测试仪器 TEST EQUIPMENTS 拟制工程审核 PREPARED BY 曾小仙 ENGINEER CHECKED BY 邱志辉 规 格 内 容 Specification 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD Address:东莞市石碣镇新风西路107号Tel：86-076986016320 Http://www.hartai.com Fax：86-076986372427 客户料号： CUST P/N 德弗力料号： DFL P/N SHDA 1062 SHDA 1062 SHDA 1062 Page4of 5 逆时针 反贴 ZLGD-Y20.5*39-33-FR ZLGD- 3. 材料清单（BILL OF MATERIAIS): 序号 NO. 材料名称 Material name 1 线材 2 磁片 3 黑膜 4 双面胶 5 锡条 6 金手指胶布 7 胶水 品名描述 Description 0.08MM*80P热风线 环保无铅焊锡条 物料代码 Material Code 无铅高温锡条 厂商代码 Vendor code RS ZH / / YX / 拟制工程审核 PREPARED BY 曾小仙 ENGINEER CHECKED BY 邱志辉 东莞市德弗力五金电子材料有限公司 Dongguan city DFL Electronic Technology Co.,LTD Address:东莞市石碣镇新风西路107号Tel：86-076986016320 Http://www.hartai.com Fax：86-076986372427 客户料号： CUST P/N 德弗力料号： DFL P/N 规 格 内 容 Specification / / / / Page5of 5 / / G42.5*0.8MM厚有孔异型硬磁片+20*1磁片 背胶42无孔带耳朵（开口长13mm，宽11mm） 内孔8MM有耳朵 5MM宽 环保万能胶+816硅胶 ZLGD-Y20.5*39-33-FR ZLGD-0447 黑膜42异形无孔无耳朵 8 热缩管 1*28MM热缩管

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 32 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2AXTH-MG16-2 On Behalf of Shenzhen Caibo Technology Co., Ltd. Qi2 25W Magnetic Wireless Car Charger Model No.: MG16-2.2, VENDICT, VDT-QI3B, VDT-QI3W, VDT-3, VBT-3, T233-G, SQ1C3, C25 Prepared for : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China Report Number : psi2512024-C01-R05 Date of Receipt : December 5, 2025 Date of Test : December 5, 2025- December 22, 2025 Date of Report : December 22, 2025 Version Number : V0 Page 2 of 32 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Page 1. Test Result Summary ................................................................................................................................ 5 2. General Information ................................................................................................................................... 6 2.1. DESCRIPTION OF DEVICE (EUT) ............................................................................................................. 6 2.2. ACCESSORIES OF DEVICE (EUT) ............................................................................................................ 7 2.3. TESTED SUPPORTING SYSTEM DETAILS ................................................................................................. 7 2.4. BLOCK DIAGRAM OF CONNECTION BETWEEN EUT AND SIMULATORS ....................................................... 7 2.5. DESCRIPTION OF TEST MODES ............................................................................................................... 7 2.6. TEST CONDITIONS ................................................................................................................................. 7 2.7. TEST FACILITY ...................................................................................................................................... 8 2.8. MEASUREMENT UNCERTAINTY ............................................................................................................... 8 2.9. TEST EQUIPMENT LIST ........................................................................................................................... 9 3. Test Results and Measurement Data ..................................................................................................... 10 3.1. CONDUCTED EMISSION ........................................................................................................................ 10 3.2. RADIATED SPURIOUS EMISSION MEASUREMENT ................................................................................... 16 3.3. TEST SPECIFICATION ........................................................................................................................... 28 4. Photos of test setup ................................................................................................................................ 32 5. Photos of EUT .......................................................................................................................................... 32 Page 3 of 32 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China TEST REPORT DECLARATION Applicant : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China Manufacturer : Shenzhen Caibo Technology Co., Ltd. Address : F4, Building 30, Fifth Industrial Zone, Huaide Cuigang Industrial Park, Fu Yong, Bao’an District, Shenzhen, China EUT Description : Qi2 25W Magnetic Wireless Car Charger (A) Model No. : MG16-2.2, VENDICT, VDT-QI3B, VDT-QI3W, VDT-3, VBT-3, T233-G, SQ1C3, C25 (B) Trademark : N/A Measurement Standard Used: FCC CFR Title 47 Part 15 Subpart C ANSI C63.10:2020 Test Result: PASS The device described above is tested by Shenzhen PSI Testing Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The test results are contained in this test report and Shenzhen PSI Testing Co., Ltd. is assumed full responsibility for the accuracy and completeness of test. Also, this report shows that the EUT is technically compliant with the FCC CFR Title 47 Part 15 Subpart C requirements. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen PSI Testing Co., Ltd. Tested by (name + signature).............: Jensen Wang Test Engineer Approved by (name + signature).......: Simple Guan Project Manager Date of issue................................: December 22, 2025 Page 4 of 32 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao’an District, Shenzhen, Guangdong, China Revision History Revision Issue Date Revisions Revised By V0 December 22, 2025 Initial released Issue Jensen Wang Page 5 of 32 R…

Text truncated - open the document above for the full version.

Page 1 of 2 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix I Test Setup Photo FCC ID: 2AXTH-MG16-2 Spurious Radiation Emissions Test (<30M) Spurious Radiation Emissions Test (<1G) Page 2 of 2 Report No.: psi2512024-C01-R05 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Conducted emission Test ------End------