2AZUR-H1Tablet PC

17 Manufacturer's Name: ShenZhen Telconn Technology Co.,Ltd. Tablet PC Model number: G-TiDE_H1 Operating Temperature: -10~40°C This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. 1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 2 . CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 3.The product shall only be connected to a USB interface of version USB 2.0 4.Adapter shall be installed near the equipment and shall be easily accessible. 5.The plug considered as disconnect device of adapter 6.The device complies with RF specifications when the device used at 0mm form your body 18 RF Specification: Function Operation Frequency Max RF output power: Limit BLE 2402MHz–2480MHz 2.07 dBm 20 dBm. BT(BR+EDR) 2402MHz–2480MHz 9.76 dBm 20 dBm. WIFI 802.11b/g/ n(HT20,HT40) 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n40:2422-2462MHz 12.68 dBm 20 dBm. FM Rx(Downlink): 87.5MHz~108MHz -- -- EU Declaration of Conformity We, ShenZhenTelconn Technology Co.,Ltd. (41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China.) hereby declares that this Tablet PC is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. According to Article 10(2) of Directive 2014/53/EU, the G-TiDE_H1 can be used in Europe without restriction. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10

底面CD纹薄镀黑锖色 镭雕丝印蓝色PT2192C 丝印金属灰PT8403C

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 BT/WIFI ANT

FCC ID: 2AZUR-H1 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.4024.214 2.644±153.16<50.980203.00YES 2.441 3.943 2.484±153.16<50.988133.00YES 2.480 3.392 2.184±153.16<50.995993.00YES 2.4026.958 4.967.5±18.57.08<52.194403.00YES 2.441 8.222 6.647.5±18.57.08<52.212153.00YES 2.480 6.896 4.897.5±18.57.08<52.229753.00YES 2.402 7.236 5.298±197.94<52.462163.00YES 2.441 8.663 7.358±197.94<52.482073.00YES 2.480 7.299 5.378±197.94<52.501823.00YES 2.402 1.037 1.271±121.58<50.491273.00YES 2.441 1.45 1.401±121.58<50.495243.00YES 2.480 1.337 1.361±121.58<50.499183.00YES GFSK π/4- DQPSK 8-DQPSK BLE WIFI2.4G Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.4129.4 8.718.5±19.58.91<52.768343.00YES 2.437 9.5 8.918.5±19.58.91<52.782643.00YES 2.462 9.3 8.518.5±19.58.91<52.796883.00YES 2.4129.44 8.798.5±19.58.91<52.768343.00YES 2.437 8.7 7.418.5±19.58.91<52.782643.00YES 2.462 9.26 8.438.5±19.58.91<52.796883.00YES 2.412 9.5 8.918.5±19.58.91<52.768343.00YES 2.437 8.76 7.528.5±19.58.91<52.782643.00YES 2.462 9.17 8.268.5±19.58.91<52.796883.00YES 2.422 8.95 7.858.5±19.58.91<52.774073.00YES 2.437 9.05 8.048.5±19.58.91<52.782643.00YES 2.452 8.69 7.408.5±19.58.91<52.791203.00YES 802.11b 802.11g 802.11n2 0 802.11n4 0 Conclusion: For the max result : 2.79688 ≤ 3.0 for 1g SAR, SAR is not required. Signature: Date: 2021-07-07 NAME AND TITLE (Please print or type): Alex li /Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S21052603002002 Version.1.3 Page 1 of 47 RADIO TEST REPORT FCC ID: 2AZUR-H1 Product: Tablet PC Trade Mark: G-TiDE Model No.: G-TiDE_H1 Family Model: Klap T1, G-TiDE_H2, Klap T2, G-TiDE_H3, Klap T3 Report No.: S21052603002002 Issue Date: Jun 22. 2021 Prepared for ShenZhenTelconn Technology Co.,Ltd. 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S21052603002002 Version.1.3 Page 2 of 47 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 8.1 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 34 8.2 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 36 8.3 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 40 8.4 BAND EDGE ................................................................................................................................................. 42 8.5 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 44 Report No.: S21052603002002 Version.1.3 Page 3 of 47 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : ShenZhenTelconn Technology Co.,Ltd. Address ....................................... : 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Manufacturer's Name .................. : ShenZhenTelconn Technology Co.,Ltd. Address ....................................... : 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Product description Product name .............................. : Tablet PC Model and/or type reference ...... : G-TiDE_H1 Family Model ............................... : Klap T1, G-TiDE_H2, Klap T2, G-TiDE_H3, Klap T3 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment …

Text truncated - open the document above for the full version.

Report No.: S21052603002003 Version.1.3 Page 1 of 87 FCC RADIO TEST REPORT FCC ID: 2AZUR-H1 Product: Tablet PC Trade Mark: G-TiDE Model No.: G-TiDE_H1 Family Model: Klap T1, G-TiDE_H2, Klap T2, G-TiDE_H3, Klap T3 Report No.: S21052603002003 Issue Date: Jun 22, 2021 Prepared for ShenZhenTelconn Technology Co.,Ltd. 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090Website:http://www.ntek.org.cn Report No.: S21052603002003 Version.1.3 Page 2 of 87 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 27 7.4 DUTY CYCLE ............................................................................................................................................... 29 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 30 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 32 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 34 7.8 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 36 7.9 ANTENNA APPLICATION .......................................................................................................................... 37 8 TEST RESULTS ................................................................................................................................................... 38 8.1 DUTY CYCLE ............................................................................................................................................... 38 8.2 MAXIMUM CONDUCTED OUTPUT POWER ........................................................................................... 45 8.3 OCCUPIED CHANNEL BANDWIDTH ....................................................................................................... 46 8.4 MAXIMUM POWER SPECTRAL DENSITY LEVEL ................................................................................. 59 8.5 BAND EDGE ................................................................................................................................................. 66 8.6 CONDUCTED RF SPURIOUS EMISSION .................................................................................................. 75 Report No.: S21052603002003 Version.1.3 Page 3 of 87 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : ShenZhenTelconn Technology Co.,Ltd. Address ....................................... : 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Manufacturer's Name .................. : ShenZhenTelconn Technology Co.,Ltd. Address ....................................... : 41A Building 301C Room The 5th district of huaidecuigang industrial park ,fuyong town, Baoan district, Shenzhen, Guangdong,China. Product description Product name .............................. : Tablet PC Model and/or type reference ..... : G-TiDE_H1 Family Model ............................... : Klap T1, G-TiDE_H2, Klap T2, G-TiDE_H3, Klap T3 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidanc…

Text truncated - open the document above for the full version.