2AZUX-P2-PROSecurity Camera

Shenzhen Anran Security Technology Co., Ltd Model difference statement Product Name: Security Camera Model N o.: P2 Pro, P2, P2 Max, B4, B4 Pro, B4 Max, B1, B1 Pro, B1 Max, P3 Pro, P3 Max, P5 Pro, P5 Max, E2 Pro, E2 Max, T2, T2 Pro, T2 Max, T1, T1 Pro, T1 Max, F1 Pro, Y4, Y10, W10 We (Shenzhen Anran Security Technology Co., Ltd. No.290, Jihua Road, Jihua street, Longgang District, Shenzhen, No.112) hereby state that all the models are the same circuit and module, except the model name and color. Signature: Name: Hans Yi Title: Tel: 18826978584 Email: [email protected] Date: 6.17.2022

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Anran Security Technology Co., Ltd Address: No.290, Jihua Road, Jihua street, Longgang District, Shenzhen, No.112 Product Name: Security Camera Model Number: P2 Pro, P2, P2 Max, B4, B4 Pro, B4 Max, B1, B1 Pro, B1 Max, P3 Pro, P3 Max, P5 Pro, P5 Max, E2 Pro, E2 Max, T2, T2 Pro, T2 Max, T1, T1 Pro, T1 Max, F1 Pro, Y4, Y10, W10 FCC Identifier: 2AZUX-P2-PRO We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Hans Yi Date: 6/17/2022 Title: Signature of applicant:

C5266091_X10_Ed.1 1/1 Shenzhen Anran Security Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/17/2022 Subject: Request for Confidentiality FCC ID: 2AZUX-P2-PRO To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Hans Yi Date: 6/17/2022 Title:

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: P2 Pro Photo 1 Photo 2 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 ----End of Report----

Page 1 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: P2 Pro Photo 1 Photo 2 Page 2 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 Page 5 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photo 9 Photo 10 ----End of Report---- ANT

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi220408008-14E2 Date of issue: 2022-05-19 Applicant: Shenzhen Anran Security Technology Co., Ltd Product name: Security Camera Model(s): P2 Pro, P2, P2 Max, B4, B4 Pro, B4 Max, B1, B1 Pro, B1 Max, P3 Pro, P3 Max, P5 Pro, P5 Max, E2 Pro, E2 Max, T2, T2 Pro, T2 Max, T1, T1 Pro, T1 Max, F1 Pro, Y4, Y10, W10 FCC ID: 2AZUX-P2-PRO Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 5 - Report No.: MTi220408008-14E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 5 - Report No.: MTi220408008-14E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] TEST RESULT CERTIFICATION Applicant’s name .................... : Shenzhen Anran Security Technology Co., Ltd Address .................................. : No.290, Jihua Road, Jihua street, Longgang District, Shenzhen, No.112 Manufacturer's Name ............. : Shenzhen Anran Security Technology Co., Ltd Address .................................. : No.290, Jihua Road, Jihua street, Longgang District, Shenzhen, No.112 Product description Product name ........................... : Security Camera Trademark ............................. : N/A Model Name .......................... : P2 Pro Serial Model ............................ P2, P2 Max, B4, B4 Pro, B4 Max, B1, B1 Pro, B1 Max, P3 Pro, P3 Max, P5 Pro, P5 Max, E2 Pro, E2 Max, T2, T2 Pro, T2 Max, T1, T1 Pro, T1 Max, F1 Pro, Y4, Y10, W10 Standards ............................... : N/A Test procedure ....................... : KDB 447498 D01 v06 Date of Test Date (s) of performance of tests ............ : 2022-04-08 ~2022-05-19 Test Result ............................................. : Pass Testing Engineer : (Cindy Qin) Technical Manager : (Leon Chen) Authorized Signatory : (Tom Xue) - Page 4 of 5 - Report No.: MTi220408008-14E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. - Page 5 of 5 - Report No.: MTi220408008-14E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Measurement Result 2.4GWiFi: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, 802.11n HT40: 2422-2452MHz, Power density limited: 1mW/ cm 2 Antenna Type: External Antenna; WIFI antenna gain: 3dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(3/10)=2 2.4GWiFi： Channel Freq. (MHz) modulation conducted power Tune- up power Max Antenna Evaluation result at 20cm Power density Limits (dBm) (dBm) tune-up power Gain Power density(mW/cm2 ) (mW/cm2) (dBm) (mW) Numeric Ant A Ant A Ant A Ant A Ant A Ant A 2412 802.11b 16.44 16±1 17 50.118723 2 0.01994 1 2437 16.62 16±1 17 50.118723 2 0.01994 1 2462 15.67 16±1 17 50.118723 2 0.01994 1 2412 802.11g 16.46 16±1 17 50.118723 2 0.01994 1 2437 16.56 16±1 17 50.118723 2 0.01994 1 2462 15.66 16±1 17 50.118723 2 0.01994 1 2412 802.11n H20 16.58 16±1 17 50.118723 2 0.01994 1 2437 16.52 16±1 17 50.118723 2 0.01994 1 2462 15.52 16±1 17 50.118723 2 0.01994 1 2422 802.11n H40 14.5 15±1 16 39.810717 2 0.01584 1 2437 14.5 15±1 16 39.810717 2 0.01584 1 2452 14.2 15±1 16 39.810717 2 0.01584 1 Conclusion: For the max result: 0.01994≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT----

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi220408008-14E1 Date of issue: 2022-05-19 Applicant: Shenzhen Anran Security Technology Co., Ltd Product name: Security Camera Model(s): P2 Pro, P2, P2 Max, B4, B4 Pro, B4 Max, B1, B1 Pro, B1 Max, P3 Pro, P3 Max, P5 Pro, P5 Max, E2 Pro, E2 Max, T2, T2 Pro, T2 Max, T1, T1 Pro, T1 Max, F1 Pro, Y4, Y10, W10 FCC ID: 2AZUX-P2-PRO Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 56 - Report No.: MTi220408008-14E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 56 - Report No.: MTi220408008-14E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China. Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Table of Contents 1 GENERAL INFORMATION .......................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................... 6 1.2 OPERATION CHANNEL LIST .............................................................................................................................................. 7 1.3 TEST CHANNEL LIST ....................................................................................................................................................... 7 1.4 ANCILLARY EQUIPMENT LIST ........................................................................................................................................... 7 1.5 DESCRIPTION OF SUPPORT UNITS .................................................................................................................................... 8 2 SUMMARY OF TEST RES U LT S .................................................................................................................................... 9 3 TEST FACILITIES AND ACCREDITATIONS ................................................................................................................... 10 3.1 TEST LABORATORY ...................................................................................................................................................... 10 3.2 ENVIRONMENTAL CONDITIONS ...................................................................................................................................... 10 3.3 MEASUREMENT UNCERTAINTY ...................................................................................................................................... 10 3.4 TEST SOFTWARE ......................................................................................................................................................... 10 4 EQUIPMENT LIST .................................................................................................................................................... 11 5 TEST RESULT ........................................................................................................................................................... 12 5.1 ANTENNA REQUIREMENT ............................................................................................................................................. 12 5.1.1 Standard requirement ....................................................................................................................................... 12 5.1.2 EUT antenna ..................................................................................................................................................... 12 5.2 PEAK OUTPUT POWER ................................................................................................................................................. 13 5.2.1 Limit .................................................................................................................................................................. 13 5.2.2 Test setup .......................................................................................................................................................... 13 5.2.3 Test procedure ................................................................................................................................................... 13 5.2.4 Te s t results ......................................................................................................................................................... 14 5.3 POWER SPECTRAL DENSITY ........................................................................................................................................... 15 5.3.1 Limit .................................................................................................................................................................. 15 5.3.2 Test setup .......................................................................................................................................................... 15 5.3.3 Test procedu…

Text truncated - open the document above for the full version.

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - Test Setup Photos Model: P2 Pro Radiated emissions – Below 1 GHz Radiated emissions – Above 1 GHz Page 2 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Conducted emissions ----End of Report----