2BAE5-PROWindow cleaner robot

SATUO PRO Window Cleaner Robot Instruction manual JSD ROBOT Shanxi Jiashida Robot Technology Co.,Ltd. Address:17/F,Huanneng tech block,No.17,Gaoxin street,Comprehensive reform demonstration area,Taiyuan city,Shanxi province,China. Website: www.jsd-robot.com TUYA CONNECTION GUIDE Tuya Smart Connection Guide 1 Please download and access the APP by scanning the QR codes above.Or search “Smart Life” from APP store. 2 For new users, register a new “Smart Life” account. For existing users, log into the “Smart Life” app. 9IGT78)UJK SCAN 3 Turn on the bluetooth of your mobile phone, power on the device of Satuo Pro window cleaner robot. Ensure your phone is connected to the internet. 1.Automatically discover device. Click “Add”. TUYA CONNECTION GUIDETUYA CONNECTION GUIDE Tuya Smart Connection Guide Tuya Smart Connection Guide 2.Manually add devices. Open app and press “+” to add device, or click the “add device” button directly. Two different networking modes4 2.2 If the device is displayed on the top, you can click “Add device” directly. Find and click the "Small Home Appliances" and "Window Cleaner (BLE)" 5 Check “Confirm the indicator is blinking” . TUYA CONNECTION GUIDETUYA CONNECTION GUIDE 6 Connecting the device. Tuya Smart Connection Guide Tuya Smart Connection Guide TUYA CONNECTION GUIDETUYA CONNECTION GUIDE Tuya Smart Connection Guide Tuya Smart Connection Guide 7 Add the device successfully. 8 Press any of three buttons to start/stop the device. 8.1 Select the modes according to the actual needs. 9 Control water spray TUYA CONNECTION GUIDETUYA CONNECTION GUIDE Tuya Smart Connection Guide Tuya Smart Connection Guide 10 Choose different voices.11 Adjust volume.12 Switch to clean the window inside and out. Safety specifications SAFETY SPECIFICATIONS CONTENTS Please read carefully before using the product. 1. Product contents 2. Usage 3. Indication 4. Maintenance 5. Frequently asked questions (FAQ) 6. Specifications 7. Warranty 1.1 3DUWFRPSRQHQWV 1.2 Part name 2.1 Preparing 2.2 Steps 2.3 Remote controller instructions                          The user should follow the instructions provided in this user manual, but is ultimately responsible for assessing placement and safety when using this device. This device is not intended to be used by children under 8 or anyone lacking knowledge on proper use. Supervision may be necessary. Do not allow children to play with the device. Remove any obstructions on the glass. Do not use on cracked glass. Reflective or coated glass may be scratched during operation by dirt on the glass. Use only the power adapter supplied with this device. Use of other types of power adapters will result in malfunction or danger. Do not use it in rainy, snowy days or in humid environments. Do not use in areas containing flammable or combustible liquids or gases. Do not spray or pour water on to the device. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard. The plug must be removed from the socket before cleaning or maintaining the device. If the device is not used for a long time, please turn off and store it in a dry environment after full charging, and charging it for at least three months to prevent the battery damage. The battery must be replaced by the manufacturer or its service agent in order to avoid a hazard,the battery must be removed and discarded according to local laws and regulations before disposal of the device. The device must be disconnected from the socket before removing the battery for disposal of the device. Do not use on frameless glass. 1. 2. 3. 4. 5. 7. 6. 8. 9. 10. 11. 12. Fix the storage box, fasten the safety cord and tie to an indoor fixture before operating the device. 13. Product contentsProduct contents PACKING LISTPART NAME 0504 1. /1.2 Part name /1.1 Part comp- onents 1. Window cleaner robot Cleaning disc*4 PCSCleaning cloth*6 PCS Base station Box handle Front of base station Back of base station Side of base station Cover opening button Power-on indicator Retract wire button Suction plate deflation switch Base station sucker Power cord Safety pod port Floor tile alignment mark POZDWHUERWWOH 5HPRWHFRQWUROOHU6DIHW\URSH *ODVVFOHDQLQJWDEOHWV Put 1-2 pieces cleaning tablet into the water bottle,and add cleaning solution into the water tank after it is fully dissolved. Put the cleaning cloth on the cleaning disc, align the buckle,and fix the cleaning disc on the device. Put 1-2 pieces cleaning tablet into the water bottle. The maximum capacity of the water tank is 50ml. Usage Front of device Back of device Side of device Working indicator Water inlet Cleaning cloth Power switch Vent Cleaning disc Indicator Buzzer Start/Pause button Window cleaner handle Ultrasonic spray components Visual water tank Charging port PART NAMEPREPARETION 0706 Add the cleaning solution Installation of cleaning cloth and cleaning disc /2.1 Prepa…

Text truncated - open the document above for the full version.

Shanxi Jiashida Robot Technology Co., Ltd 17/f, huanneng tech block, no17, Gaoxin St., Zonggai shifan dist., Taiyuan, CHINA Apr.06, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2BAE5-PRO Model Number: PRO, 0 PRO, 1 PRO, 2 PRO, 3 PRO, 4 PRO, 5 PRO To Whom It May Concern: We, The Shanxi Jiashida Robot Technology Co., Ltd hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Baoliang Wang

Shanxi Jiashida Robot Technology Co., Ltd Agent Authorization Company: Shanxi Jiashida Robot Technology Co., Ltd Address: 17/f, huanneng tech block, no17, Gaoxin St., Zonggai shifan dist., Taiyuan, CHINA Product Name: Window cleaner robot Model Number(s): PRO, 0 PRO, 1 PRO, 2 PRO, 3 PRO, 4 PRO, 5 PRO Product Description: Window cleaner robot We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-03-21 Name: Baoliang Wang Company: Shanxi Jiashida Robot Technology Co., Ltd

Report No.: AGC15463230201AP03 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15463230201AP03 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15463230201AP03 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15463230201AP03 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm&30mm FCC ID: 2BAE5-PRO

Report No.: AGC15463230201AP03 Page 1 of 12 INTERNAL PHOTOS OPEN VIEW OF EUT BATTERY VIEW OF EUT Report No.: AGC15463230201AP03 Page 2 of 12 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) BT Antenna Report No.: AGC15463230201AP03 Page 3 of 12 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC15463230201AP03 Page 4 of 12 INTERNAL VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC15463230201AP03 Page 5 of 12 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) Report No.: AGC15463230201AP03 Page 6 of 12 .INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) Report No.: AGC15463230201AP03 Page 7 of 12 INTERNAL VIEW OF EUT (FIGURE 11) INTERNAL VIEW OF EUT (FIGURE 12) Report No.: AGC15463230201AP03 Page 8 of 12 INTERNAL VIEW OF EUT (FIGURE 13) INTERNAL VIEW OF EUT (FIGURE 14) Report No.: AGC15463230201AP03 Page 9 of 12 INTERNAL VIEW OF EUT (FIGURE 15) INTERNAL VIEW OF EUT (FIGURE 16) Report No.: AGC15463230201AP03 Page 10 of 12 INTERNAL VIEW OF EUT (FIGURE 17) INTERNAL VIEW OF EUT (FIGURE 18) Report No.: AGC15463230201AP03 Page 11 of 12 INTERNAL VIEW OF EUT (FIGURE 19) INTERNAL VIEW OF EUT (FIGURE 20) Report No.: AGC15463230201AP03 Page 12 of 12 INTERNAL VIEW OF EUT (FIGURE 21) INTERNAL VIEW OF EUT (FIGURE 22) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Window cleaner robot Model Name PRO Series Model 0 PRO, 1 PRO, 2 PRO, 3 PRO, 4 PRO, 5 PRO FCC ID 2BAE5-PRO 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE 1M: P t =4.298dBm=2.69mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(2.69mW /5mm) .[√2.402GHz)]=0.83<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. BLE 2M: P t =4.384dBm=2.74mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(2.74mW /5mm) .[√2.402GHz)]=0.85<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

BT3L Antenna test report Product Name: BT3L Antenna Type: PCB antenna Writer: Yinhua Zhang Maximum Gain：2.5dBi Efficiency:62.86% BT3L Antenna test report Version 1.0.0 Date：2020-05-12 NO：0000000001 Antenna Test Report Global Intelligent Platform BT3L Antenna test report Content 1. General Description ...................................................................................................................... 3 2. Technical Information ................................................................................................................... 3 3. Test Standards ............................................................................................................................... 3 4. Test Item ........................................................................................................................................ 4 5. Test Photo ...................................................................................................................................... 4 Appendix A Antenna Dimension ....................................................................................................... 5 Appendix B S11/VSWR ................................................................................................................... 5 Appendix C Gain and Efficiency ...................................................................................................... 6 Appendix D Radiation Pattern(1D and 3D) ...................................................................................... 7 Appendix E Test Setup Photo ........................................................................................................... 9 BT3L Antenna test report 1. General Description EUT Name BT3L Antenna Wireless type Bluetooth Antenna Type PCB antenna Dimensions Appendix A 2. Technical Information Frequency Range 2402MHz~2480MHz Test Frequency 2400,2410......2500MHz 3. Test Standards Identity Document Title IEEE 149-1979 IEEE Standard Test Procedures for Antennas BT3L Antenna test report 4. Test Item Report Section Description Appendix B S11/VSWR Appendix C Gain and Efficiency Appendix D Radiation Pattern（1D and 3D） 5. Test Photo Report Section Description Appendix E Test Setup Photo BT3L Antenna test report Appendix A Antenna Dimension Appendix B S11/VSWR Frequency (MHz) 2400 2450 2500 Return Loss -8.73 -11.76 -11.21 BT3L Antenna test report VSWR 2.16 1.71 1.77 Appendix C Gain and Efficiency Frequency (MHz) Efficiency(%) Gain（dBi） 2400 52.29% 1.62 2410 52.17% 1.71 2420 53.14% 1.93 2430 54.16% 1.98 2440 57.62% 2.00 2450 59.64% 2.17 2460 61.55% 2.45 2470 60.64% 2.38 BT3L Antenna test report 2480 62.86% 2.50 2490 59.85% 2.30 2500 60.41% 2.49 Appendix D Radiation Pattern(1D and 3D) BT3L Antenna test report BT3L Antenna test report Appendix E Test Setup Photo

Page 1 of 60 FCC Test Report Report No.: AGC15463230201FE02 FCC ID : 2BAE5-PRO APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Window cleaner robot BRAND NAME : SATUO MODEL NAME : PRO, 0 PRO, 1 PRO, 2 PRO, 3 PRO, 4 PRO, 5 PRO APPLICANT : Shanxi Jiashida Robot Technology Co., Ltd DATE OF ISSUE : Mar. 14, 2023 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15463230201FE02 Page 2 of 60 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 14, 2023 Valid Initial Release Report No.: AGC15463230201FE02 Page 3 of 60 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 7 2.4. TEST METHODOLOGY ............................................................................................................................. 7 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 7 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 7 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 7 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 8 4. DESCRIPTION OF TEST MODES ................................................................................................................... 9 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 10 5.1. CONFIGURATION OF TESTED SYSTEM ............................................................................................... 10 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 10 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 10 6. TEST FACILITY ............................................................................................................................................... 11 7. PEAK OUTPUT POWER ................................................................................................................................ 12 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 12 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 12 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 13 8. BANDWIDTH .................................................................................................................................................. 17 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 17 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 17 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 24 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 24 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 24 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 24 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 24 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 36 Report No.: AGC15463230201FE02 Page 4 of 60 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 36 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 36 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 36 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 36 11. RADIATED EMISSION ................................................................................................................................. 40 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 40 11.2. TEST SETUP .......................................................................................................................................... 41 11.3. LIMITS AND MEASUREMENT RESULT.........................................…

Text truncated - open the document above for the full version.

Report No.: AGC15463230201AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15463230201AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TES SETUP ****************************************End of Report*************************************