2BAE5-SATUOPROWindow cleaner robot-Remote control

Window cleaner robot-Remote control Rating：3VDC（AAA TYPE) Wireless Frequency：433.92MHz NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shanxi Jiashida Robot Technology Co., Ltd Agent Authorization Company: Shanxi Jiashida Robot Technology Co., Ltd Address: 17/f, huanneng tech block, no17, Gaoxin St., Zonggai shifan dist., Taiyuan, CHINA Product Name: Window cleaner robot-Remote control Model Number(s): SATUO Pro Product Description: Window cleaner robot-Remote control We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-03-16 Name: Baoliang Wang Company: Shanxi Jiashida Robot Technology Co., Ltd

Report No.: AGC15463230202AP02 Page 1 of 4 EXTERNAL PHOTOS ALL VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15463230202AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15463230202AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15463230202AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm&30mm FCC ID: 2BAE5-SATUOPRO

Report No.: AGC15463230202AP02 Page 1 of 2 INTERNAL PHOTOS OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Antenna Report No.: AGC15463230202AP02 Page 2 of 2 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION FCC ID 2BAE5-SATUOPRO Product Description Window cleaner robot-Remote control Model Name SATUO Pro Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Others (SRD:433.92MHz) Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Field Strength 79.55dBμV/m(PK) 71.78dBμV/m(AV) Antenna Gain 2.4dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Evaluation Result Pass 2. PORTABLE DEVICE EVALUATION METHOD AND LIMIT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [if(GHz)] s 3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz.  Power and distance are rounded to the nearest mW and mm before calculation.  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm) ( f(MHz)/150)] mW, at 100MHz to 1500 MHz; b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)-10] mW at > 1500 MHz and ≤6 GHz; 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by 1/2 for test separation distances ≤50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3. MOBILE DEVICE EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. MEASUREMENT RESULT Test Mode Channel Frequency (MHz) Field Strength (dBμV/m) Max Output power (mW) Calculate on Value (Note 1) Threshold Value ASK SRD 433.92(PK) 79.55 0.027 0.00356 3.0 SRD 433.92(AV) 71.78 0.005 0.00066 3.0 Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example: 0.027/5*√0.43392=0.00356 ≤ 3.0 Fox example: 0.005/5*√0.43392=0.00066 ≤ 3.0 Note 2:Max Power (dBm) = Field Strength of Fundamental (dBuV/m@3m)-95.23 Note 3:Max Power (mW) = 10^ (Max power (dBm)/10) According to KDB447498 D01 V06, threshold at which no SAR required is ≤3.0 for 1-g SAR, separation distance is 5mm, and no simultaneous SAR measurement is required. 5. CONCLUSION Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required.

Page 1 of 31 FCC Test Report Report No.: AGC15463230202FE10 FCC ID : 2BAE5-SATUOPRO PRODUCT DESIGNATION : Window cleaner robot-Remote control BRAND NAME : N/A MODEL NAME : SATUO Pro APPLICANT : Shanxi Jiashida Robot Technology Co., Ltd DATE OF ISSUE : Mar. 14, 2023 STANDARD(S) : FCC Part 15 Subpart C §15.231 REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15463230202FE10 Page 2 of 31 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 14, 2023 Valid Initial Release Report No.: AGC15463230202FE10 Page 3 of 31 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 7 2.4 TEST METHODOLOGY .......................................................................................................................... 7 2.5 SPECIAL ACCESSORIES ....................................................................................................................... 7 2.6 EQUIPMENT MODIFICATIONS .............................................................................................................. 7 2.7 ANTENNA REQUIREMENT .................................................................................................................... 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 8 3.2 TEST FACILITY ....................................................................................................................................... 8 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 9 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 10 4.SYSTEM TEST CONFIGURATION .................................................................................................................. 11 4.1 EUT CONFIGURATION .......................................................................................................................... 11 4.2 EUT EXERCISE ...................................................................................................................................... 11 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................. 11 4.4 EQUIPMENT USED IN TESTED SYSTEM............................................................................................ 11 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 12 5. DESCRIPTION OF TEST MODES ................................................................................................................. 13 6. PROVISION FOR MOMENTARY OPERATION ............................................................................................. 14 6.1 PROVISIONS APPLICABLE .................................................................................................................. 14 6.2 MEASUREMENT PROCEDURE ........................................................................................................... 14 6.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 14 6.4 MEASUREMENT RESULTS.................................................................................................................. 15 7. DUTY CYCLE CORRECTION FACTOR ........................................................................................................ 16 7.1 PROVISIONS APPLICABLE .................................................................................................................. 16 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 16 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 16 7.4 MEASUREMENT RESULTS.................................................................................................................. 16 8. 20 dB BANDWIDTH ....................................................................................................................................... 19 8.1 PROVISIONS APPLICABLE .................................................................................................................. 19 8.2 MEASUREMENT PROCEDURE ........................................................................................................... 19 Report No.: AGC15463230202FE10 Page 4 of 31 8.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ............................................... 19 8.4 MEASUREMENT RESULTS.................................................................................................................. 20 9. RADIATED EMISSION ................................................................................................................................... 21 9.1 LIMITS OF R…

Text truncated - open the document above for the full version.

Report No.: AGC15463230202AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC15463230202AP01 Page 2 of 2 RF CONDUCTED TES SETUP ****************************************End of Report*************************************