2BAK2-F106PROsmartphone

Shenzhen Qichang Intelligent Technology Co., Ltd Family models difference declaration smartphone Model: F106 Pro Family Model: F106, F106 P, F106 PLUS, F106 S, F106 + Difference declaration: All the model are the same circuit and RF module,except the model names. Regards, Signature Wenwen Jiang / Manager Date/City: 2024-03-22 / Shenzhen Phone: +86-755-81797123 E-mail: [email protected]

Shenzhen Qichang Intelligent Technology Co., Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Mar 14, 2024 Signed by (Printed Name/Title): Kenneth Young/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Qichang Intelligent Technology Co., Ltd Grantee Code: 2BAK2 FCC ID: 2BAK2-F106PRO Contact Name: Wenwen Jiang Street Address: Room 510, Building 7, Yunli Intelligent Park, No. 7, Bantian Street, City/Province/Zip: Longgang , Shenzhen Telephone No: +86-755-81797123 Email: [email protected] Applicant Signature: Date: 2024/03/14 Signed by (Printed Name/Title): Wenwen Jiang /Manager FRN:0033538703

(Shenzhen Qichang Intelligent Technology Co., Ltd) (2024.03.22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BAK2-F106PRO) [Shenzhen Qichang Intelligent Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Wenwen Jiang (Shenzhen Qichang Intelligent Technology Co., Ltd) (2024.03.22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BAK2-F106PRO) [Shenzhen Qichang Intelligent Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Wenwen Jiang

Shenzhen Qichang Intelligent Technology Co., Ltd Agent Authorization Letter (2024-03-22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Wenwen Jiang / Manager Date/City: 2024-03-22 / Shenzhen Phone: +86-755-81797123 E-mail: [email protected]

Shenzhen Qichang Intelligent Technology Co., Ltd Long Term Confidentiality Request Letter (2024-03-22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: smartphone Model: F106 Pro, F106, F106 P, F106 PLUS, F106 S, F106 + FCC ID: 2BAK2-F106PRO To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Part List / BOM List / PCB Layout  Operational Description  Tune-up Procedure  FCC Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Wenwen Jiang / Manager Date/City: 2024-03-22 / Shenzhen Phone: +86-755-81797123 E-mail: [email protected]

Shenzhen Qichang Intelligent Technology Co., Ltd Short Term Confidentiality Request Letter (2024-03-22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: smartphone Model: F106 Pro, F106, F106 P, F106 PLUS, F106 S, F106 + FCC ID: 2BAK2-F106PRO To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < Shenzhen Qichang Intelligent Technology Co., Ltd >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < Shenzhen Qichang Intelligent Technology Co., Ltd > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < Shenzhen Qichang Intelligent Technology Co., Ltd > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Wenwen Jiang / Manager Date/City: 2024-03-22 / Shenzhen Phone: +86-755-81797123 E-mail: [email protected]

Page 1 of 256 Report No.: S24020200806001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： smartphone Brand Name： Model Name： F106 Pro Family Model： F106, F106 P, F106 PLUS, F106 S, F106 + Report No.： S24020200806001 FCC ID： 2BAK2-F106PRO Prepared for Shenzhen Qichang Intelligent Technology Co., Ltd Room 510, Building 7, Yunli Intelligent Park, No. 7, Bantian Street, Longgang , Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 256 Report No.: S24020200806001 TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen Qichang Intelligent Technology Co., Ltd Address .................................. : Room 510, Building 7, Yunli Intelligent Park, No. 7, Bantian Street, Longgang , Shenzhen, China Manufacturer's Name .......... : Shenzhen Qichang Intelligent Technology Co., Ltd Address .................................. : Room 510, Building 7, Yunli Intelligent Park, No. 7, Bantian Street, Longgang , Shenzhen, China Product description Product name ........................ : smartphone Brand Name ......................... : Model and/or type reference .............................. : F106 Pro Family Model ......................... : F106, F106 P, F106 PLUS, F106 S, F106 + Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................. S240202008006 Date of Test Date (s) of performance of tests .............. : Feb. 22, 2024 ~ Mar. 02, 2024 Date of Issue ........................................... : Mar. 19, 2024 Test Result ............................................... : Pass Prepared By : Reviewed By : Approved By : Jack Li (Project Engineer) Aaron Cheng (Supervisor) Alex Li (Manager) Page 3 of 256 Report No.: S24020200806001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Mar. 19, 2024 Jack Li Page 4 of 256 Report No.: S24020200806001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 19 3.1. Power Reference ................................................................................... 19 3.2. Area scan & Zoom scan .......................................................................... 19 3.3. Description of interpolation/extrapolation scheme .............................. 21 3.4. Volumetric Scan ..................................................................................... 21 3.5. Power Drift ............................................................................................ 21 4. System Verification Procedure .......................................................................... 22 4.1. Tissue Verification ................................................................................. 22 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 23 4.2. System Verification Procedure .............................................................. 24 4.2.1. System Verification Results .............................................................. 25 5. SAR Measurement variability and uncertainty .................................................. 26 5.1. SAR measureme…

Text truncated - open the document above for the full version.

Page 106 of 256 Report No.: S24020200806001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 37.8 91 22.3 91 11.3 77 5.66 94 2.82 91 1.40 43 0.71 50 0.36 37 0.18 02 0.10 08 0.05 27 0.03 97 3D screen shot Hot spot position Page 107 of 256 Report No.: S24020200806001 MEASUREMENT 8 Date of measurement: 22/2/2024 A. Experimental conditions. Area Scan dx=10mm dy=10mm, h= 2.00 mm ZoomScan 7x7x12,dx=4mm dy=4mm dz=2mm Phantom Validation plane Device Position Dipole Band CW5800 Channels Middle Signal CW (Crest factor: 1.0) ConvF 2.04 B. SAR Measurement Results Frequency (MHz) 5800.000000 Relative permittivity (real part) 34.352098 Relative permittivity (imaginary part) 16.122741 Conductivity (S/m) 5.195105 Variation (%) -0.500000 SURFACE SAR VOLUME SAR Maximum location: X=0.00, Y=6.00 SAR Peak: 57.37 W/kg SAR 10g (W/Kg) 6.260228 SAR 1g (W/Kg) 17.548190 Page 108 of 256 Report No.: S24020200806001 Z (m m) 0.00 2.00 4.00 6.00 8.00 10.0 0 12.0 0 14.0 0 16.0 0 18.0 0 20.0 0 22.0 0 SA R (W/ Kg) 54.0 36 31.9 48 16.1 44 8.17 66 4.08 90 2.05 50 1.03 61 0.51 44 0.27 95 0.15 72 0.07 88 0.04 38 3D screen shot Hot spot position Page 109 of 256 Report No.: S24020200806001 1. Appendix C. Plots of High SAR Measurement Table of contents MEASUREMENT 1 GSM 850 Head MEASUREMENT 2 GSM 850 Body MEASUREMENT 3 GSM 1900 Head MEASUREMENT 4 GSM 1900 Body MEASUREMENT 5 WCDMA Band 2 Head MEASUREMENT 6 WCDMA Band 2 Body MEASUREMENT 7 WCDMA Band 4 Head MEASUREMENT 8 WCDMA Band 4 Body MEASUREMENT 9 WCDMA Band 5 Head MEASUREMENT 10 WCDMA Band 5 Body MEASUREMENT 11 WLAN 5.2G Head MEASUREMENT 12 WLAN 5.8G Head MEASUREMENT 13 WLAN 5.2G Body MEASUREMENT 14 WLAN 5.8G Body MEASUREMENT 15 WLAN 2.4G Head MEASUREMENT 16 WLAN 2.4G Body MEASUREMENT 17 LTE Band 2 Head MEASUREMENT 18 LTE Band 2 Body MEASUREMENT 19 LTE Band 4 Head MEASUREMENT 20 LTE Band 4 Body MEASUREMENT 21 LTE Band 5 Head MEASUREMENT 22 LTE Band 5 Body MEASUREMENT 23 LTE Band 7 Head MEASUREMENT 24 LTE Band 7 Body MEASUREMENT 25 LTE Band 12 Head MEASUREMENT 26 LTE Band 12 Body MEASUREMENT 27 LTE Band 17 Head MEASUREMENT 28 LTE Band 17 Body MEASUREMENT 29 LTE Band 25 Head MEASUREMENT 30 LTE Band 25 Body MEASUREMENT 31 LTE Band 41 Head MEASUREMENT 32 LTE Band 41 Body MEASUREMENT 33 LTE Band 26A Head MEASUREMENT 34 LTE Band 26A Body MEASUREMENT 35 LTE Band 26B Head MEASUREMENT 36 LTE Band 26B Body Page 110 of 256 Report No.: S24020200806001 MEASUREMENT 37 LTE Band 66 Head MEASUREMENT 38 LTE Band 66 Body Page 111 of 256 Report No.: S24020200806001 MEASUREMENT 1 Date of measurement: 1/3/2024 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band GSM850 Channels Middle Signal TDMA (Crest factor: 2.0) ConvF 2.32 B. SAR Measurement Results Frequency (MHz) 836.400000 Relative permittivity (real part) 41.301842 Relative permittivity (imaginary part) 19.317196 Conductivity (S/m) 0.897606 Variation (%) -1.240000 SURFACE SAR VOLUME SAR Maximum location: X=-50.00, Y=-22.00 SAR Peak: 0.18 W/kg SAR 10g (W/Kg) 0.107511 SAR 1g (W/Kg) 0.139583 Page 112 of 256 Report No.: S24020200806001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.1887 0.1417 0.1054 0.0977 0.0721 0.0662 0.0496 3D screen shot Hot spot position Page 113 of 256 Report No.: S24020200806001 MEASUREMENT 2 Date of measurement: 1/3/2024 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Band GSM850 Channels Middle Signal TDMA (Crest factor: 2.0) ConvF 2.32 B. SAR Measurement Results Frequency (MHz) 836.400000 Relative permittivity (real part) 41.301842 Relative permittivity (imaginary part) 19.317196 Conductivity (S/m) 0.897606 Variation (%) -3.380000 SURFACE SAR VOLUME SAR Maximum location: X=8.00, Y=-9.00 SAR Peak: 0.44 W/kg SAR 10g (W/Kg) 0.222427 SAR 1g (W/Kg) 0.317029 Page 114 of 256 Report No.: S24020200806001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.4528 0.3233 0.2255 0.1689 0.1316 0.0980 0.0716 3D screen shot Hot spot position Page 115 of 256 Report No.: S24020200806001 MEASUREMENT 3 Date of measurement: 2/3/2024 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band GSM1900 Channels Middle Signal TDMA (Crest factor: 4.0) ConvF 2.63 B. SAR Measurement Results Frequency (MHz) 1880.000000 Relative permittivity (real part) 38.975822 Relative permittivity (imaginary part) 13.747208 Conductivity (S/m) 1.435820 Variation (%) -3.790000 SURFACE SAR VOLUME SAR Maximum location: X=-47.00, Y=-41.00 SAR Peak: 0.09 W/kg SAR 10g (W/Kg) 0.043799 SAR 1g (W/Kg) 0.065449 Page 116 of 256 Report No.: S24020200806001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.0911 0.0668 0.0473 0.0347 0.0279 0.0230 0.0199 3D screen shot Hot spot position Page 117 of 256 Report No.: S24020200806001 MEASUREMENT 4 Date of measurement: 2/3/2024 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Validation plane Device Position Body Band GSM1900 Channels Middle Signal TDMA (Crest factor: 4.0) ConvF 2.63 B. SAR Measurement Results Frequency (MHz) 1880.000000 Relative permittivity (real part) 38.975822 Relative permittivity (imaginary part) 13.747208 Conductivity (S/m) 1.435820 Variation (%) 1.000000 SURFACE SAR VOLUME SAR Maximum location: X=8.00, Y=-42.00 SAR Peak: 0.48 W/kg SAR 10g (W/Kg) 0.171191 SAR 1g (W/Kg) 0.305576 Page 118 of 256 Report No.: S24020200806001 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.5080 0.3046 0.1601 0.1134 0.0682 0.0461 0.0327 3D screen shot Hot spot position Page 119 of 256 Report No.: S24020200806001 MEASUREMENT 5 Date of measurement: 5/3/2024 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band Band2_WCDMA…

Text truncated - open the document above for the full version.

Page 195 of 256 Report No.: S24020200806001 Page 196 of 256 Report No.: S24020200806001 Page 197 of 256 Report No.: S24020200806001 Page 198 of 256 Report No.: S24020200806001 Page 199 of 256 Report No.: S24020200806001 Page 200 of 256 Report No.: S24020200806001 Page 201 of 256 Report No.: S24020200806001 Page 202 of 256 Report No.: S24020200806001 Page 203 of 256 Report No.: S24020200806001 Page 204 of 256 Report No.: S24020200806001 Page 205 of 256 Report No.: S24020200806001 Page 206 of 256 Report No.: S24020200806001 Page 207 of 256 Report No.: S24020200806001 Page 208 of 256 Report No.: S24020200806001 Page 209 of 256 Report No.: S24020200806001 Page 210 of 256 Report No.: S24020200806001 Page 211 of 256 Report No.: S24020200806001 Page 212 of 256 Report No.: S24020200806001 Page 213 of 256 Report No.: S24020200806001 Page 214 of 256 Report No.: S24020200806001 Page 215 of 256 Report No.: S24020200806001 Page 216 of 256 Report No.: S24020200806001 Page 217 of 256 Report No.: S24020200806001

Page 218 of 256 Report No.: S24020200806001 Page 219 of 256 Report No.: S24020200806001 Page 220 of 256 Report No.: S24020200806001 Page 221 of 256 Report No.: S24020200806001 Page 222 of 256 Report No.: S24020200806001 Page 223 of 256 Report No.: S24020200806001 Page 224 of 256 Report No.: S24020200806001 Page 225 of 256 Report No.: S24020200806001 Page 226 of 256 Report No.: S24020200806001 Page 227 of 256 Report No.: S24020200806001 Page 228 of 256 Report No.: S24020200806001 Page 229 of 256 Report No.: S24020200806001 Page 230 of 256 Report No.: S24020200806001 Page 231 of 256 Report No.: S24020200806001 Page 232 of 256 Report No.: S24020200806001 Page 233 of 256 Report No.: S24020200806001 Page 234 of 256 Report No.: S24020200806001 Page 235 of 256 Report No.: S24020200806001 Page 236 of 256 Report No.: S24020200806001 Page 237 of 256 Report No.: S24020200806001 Page 238 of 256 Report No.: S24020200806001 Page 239 of 256 Report No.: S24020200806001 Page 240 of 256 Report No.: S24020200806001

Page 241 of 256 Report No.: S24020200806001 Page 242 of 256 Report No.: S24020200806001 Page 243 of 256 Report No.: S24020200806001 Page 244 of 256 Report No.: S24020200806001 Page 245 of 256 Report No.: S24020200806001 Page 246 of 256 Report No.: S24020200806001 Page 247 of 256 Report No.: S24020200806001 Page 248 of 256 Report No.: S24020200806001 Page 249 of 256 Report No.: S24020200806001 Page 250 of 256 Report No.: S24020200806001 Page 251 of 256 Report No.: S24020200806001 Page 252 of 256 Report No.: S24020200806001 Page 253 of 256 Report No.: S24020200806001 Page 254 of 256 Report No.: S24020200806001 Page 255 of 256 Report No.: S24020200806001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 750MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -29.73 - 52.50 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 835MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -42.84 - 50.50 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 1800MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -24.53 - 44.80 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 1900MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.28 - 46.20 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 2450MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -29.27 - 53.60 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Page 256 of 256 Report No.: S24020200806001 <Head 2600MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.57 - 54.50 - Feb. 21, 2024 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 5200MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -9.64 - 25.80 - Feb. 21, 2024 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. <Head 5800MHz> S11 parameter (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -14.91 - 38.53 - Feb. 21, 2024 The return loss is <-8dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. _______________________________________END _____________________________________

OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page1 OTA TEST REPORT Applicant Shenzhen General Test System Co., Ltd ProductRayZone1800 Issue DateFeb22, 2024 Shenzhen Fu Bang Wireless Technology Co., Ltd.tested the above equipment in accordance with the requirements in ANTI/IEEE Std 149-2008.The test results show that the equipment tested is capable of demonstrating compliance with theRequirements as documented in this report. Prepared by: Lunkang Yan Approved by: YongtangLiu Shenzhen Fu Bang Wireless Technology Co., Ltd. Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page2 1. Test Laboratory 1.1 Notes of the Test report This report shall not be reproduced in full or partial.Theresults documented in this report applyonly to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposesonly. This report is written to support regulatory compliance of applicable standards stated above. 1.2 Test facility GTS1800Microwave Anechoic Chamber ：testing frequency ranges from 600MHz to 6GHz . 1.3 Testing Location Company: Shenzhen Fu Bang Wireless Technology Co., Ltd Address: Room 302, lianjian Industry Part, Huarong road, Longhua District, Shenzhen, P.R. China Contact: lunkang Yan Telephone: 13760182610 E-mail: [email protected] 1.4 Laboratory Environment Temperature Min.= 19°C, Max.=25°C Relative humidity Min.=40%，Max.=72% Shield effect 0.6-7GHz >100dB Ground resistance <0.5Ω OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page3 2. General Description of Equipment under Test 2.1 Applicant and Manufacturer information Applicant Name Shenzhen General Test System Co., Ltd Applicant address Building C-A7 Suite 805,2190 Liuxian Avenue,Nanshan District,Shenzhen,P.R. China Manufacturer Name Shenzhen General Test System Co., Ltd Manufacturer address Building C-A7 Suite 805,2190 Liuxian Avenue, Nanshan District, Shenzhen,P.R. China 2.2 General information EUT Description Product Name RayZone1800 Model GTS-ANT D-H HW Version RayZone1800 V1.0 SW Version MaxSign 100 Antenna Type PCB Antenna Antenna Manufacturer Shenzhen General Test System Co., Ltd Test Frequency 600MHz-6GHz 2.3 Applied Standards According to the specifications of the manufacturer,it must comply with the requirements of the following standards: Test Method:ANSI/IEEE Std 149-2008 3. Test Conditions 3.1 Test Configuration The method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test(EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 1m. 3.2Test Measurement Spherical coordinate system OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page4 Figure 1 Test coordinate system Note: Theta is from 0-180degree.Phi is from EUT and record the Date, the step of rotation is 15 degree. Test Setup 4. Test Results 4.1 Gain and Efficiency OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page5 Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 700 18.5 1.2 1900 36.1 1.2 710 19.3 1.2 1920 40.5 1.0 720 19.8 1.2 1940 37.2 0.9 730 19.6 1.2 1960 35.8 1.0 740 19.8 1.2 1980 33.5 1.0 750 19.8 1.2 2000 32.1 1.0 760 19.5 1.2 2020 31.0 1.0 770 18.2 1.2 2040 30.7 1.0 780 17.8 1.2 2060 31.2 1.0 790 17.61.2 2080 30.1 1.0 800 17.0 1.2 2100 30.6 1.0 810 16.4 1.2 2120 33.7 1.1 820 19.3 1.2 2140 34.4 1.2 830 19.4 1.2 2160 33.5 1.2 840 20.2 1.2 2180 32.7 1.1 850 21.5 1.2 2200 31.0 1.0 860 22.7 1.2 2500 30.8 1.0 870 20.8 1.2 2520 34.9 1.2 880 22.9 -0.2 2540 35.3 1.2 890 23.8 -0.1 2560 34.9 1.2 900 24.7 -0.1 2580 34.0 1.2 910 25.1 1.0 2600 35.4 1.2 920 26.7 0.1 2620 36.1 1.2 930 25.7 0.1 2640 39.7 1.1 940 24.5 -0.1 2660 34.1 1.2 950 22.0 -0.2 2680 32.6 1.1 960 21.6 -0.3 2700 31.5 1.0 1700 30.1 1.0 1720 32.0 1.0 1740 33.9 0.6 1760 35.4 0.8 1780 39.6 0.5 1800 36.1 1.1 1820 38.7 1.2 1840 38.2 1.2 1860 37.9 1.0 1880 36.2 1.2 OTA Test Report Shenzhen Fu Bang Wireless Technology Co., Ltd. This report shall not be reproduced except in full, without the written approval ofShenzhen FuBang Wireless Technology Co.,Ltd. Page6 Model Test State Frequency (MHz) Efficiency (%) Gain (dBi) Frequency (MHz) Efficiency (%) Gain (dBi) Note Free Space 1520 31.3 0.8 5260 36.1 0.8 1530 33.3 1.0 5280 34.3 0.7 1540 34.3 1.1 5300 32.6 0.5 1550 32.4 1.0 5320 33.0 0.5 1560 32.3 1.0 5340 31.0 0.4 1570 31.9 1.0 5360 29.7 0.3 1580 31.7 0.9 5380 30.2 0.4 1590 31.3 0.8 5400 31.0 0.4 1600 30.3 0.7 5420 30.6 0.4 2400 35.1 0.9 5440 30.4 0.4 2410 36.6 0.8 5460 29.7 0.3 2420 36.8 0.6 5480 29.6 0.3 2430…

Text truncated - open the document above for the full version.