2BDBM-WT1WiFi& RF 2CH LED Controller

Features Technical Parameters 1 User Manual Ver 2.0.1 Output power Output voltage Output current Input and Output Input voltage Input current Output type Constant voltage Tuya APP
+
RF 2.4GHz
+
Push
Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Operation temperature Case temperature (Max.) Environment Ta: -30 O C ~ +55 O C T c: +85 O C 2000Hz (default) Logarithmic Safety and EMC EMC standard (EMC) ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 Radio Equipment(RED) ETSI EN 300 328 V2.2.2 Certication CE,EMC,LVD,RED EN 62368-1:2020+A11:2020 Safety standard(LVD) Warranty and Protection 5 years Protection Warranty 0.055kg L120 x W43 x H35mm Gross weight Size Dimming data Dimming range Input signal Control distance Dimming gray scale PWM frequency Dimming curve Package Model No.: WT1 WiFi & RF 2CH LED Controller Tuya APP cloud control/2 Channels/Push-Dim/DC power socket input/Wireless remote controlVoice control/ ● Used for control single color or color temperature LED strip. ●DC power socket input and 2 channel constant voltage output. ● Tuya APP cloud control, support on/off, color temperature and brightness adjust, delay turn on/off light, timer run, scene edit function. ● Voice control, support amazon ECHO and TmallGenie smart speaker. ● Match with RF 2.4G remote control optional. ● User need set light type by press key before Tuya APP network connection and match RF remote of the same light type. ● Each WT1 controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF LED controller or RF LED dimming driver synchronously. ● Connect with external push switch to achieve on/off and 0-100% dimming function. ● Light on/off fade time 3s selectable. LVDRED Wired connection Wireless connection DIM WiFi Router Mobile Phone RF
Remote(Optional) Panel
RF
Remote(Optional) RF
DIM Controller 15m 30m 30m DIM CCT DIM CCT CCT 30m 30m 30m 30m RF
DIM Controller RF
CCT Controller RF
CCT Controller Note:
1.
he
Tabove distance is measured in spacious
(no
obstacle) environment, Please refer to the actual test distance before installation. 2.
Please
check
if
the
WiFi router
net
in
2.4G
band, the
5G
band is
not
available, and do
not
hide
your
router
network. 3. Please
keep
the
distance
between
WT1 devices
and
router
close, and
check
the
WiFi
signals. WiFi 3G/4G/5G Tuya Cloud Amazon ECHO WiFi DIM CCT POWER SCENE SCENE ZONE ZONE ZONE ZONESCENE WT1 WT1 WT1 WT1 System
wiring 2 x (60-180)W 2 x (12-36)VDC 2CH,5A/CH 12-36VDC 10.5A Reverse polarity Over-heat Short circuit Mechanical Structures and Installations Output LED + Output LED - Output LED - Push switch Push switch common Power input + Power input - LED indicator Match/Set key Installation rack DC socket input Installation rack + - + I N P U T 1 2 - 2 4 V D C MATCH/SET RUN C W W W W W L E D O U T P U T Push Dim 114.00 mm 3 8 . 0 0 m m 20.00 mm Dimming remote Press and hold match/set key for 8s, until the RUN LED indicator turn white, then release, the controller will become DIM type, then do smart cong by tuya APP, or short press match key to match with dimming RF remote. For dual color CCT ● + - + I N P U T 1 2 - 2 4 V D C + CW WW Dual color LED strip Power Supply 12-36VDC Constant Voltage AC100-240V ● For single color + I N P U T 1 2 - 2 4 V D C Single color LED strip + CCT remote Wiring Diagram Power Adapter 12-36VDC MATCH/SET RUN MATCH/SET RUN Press and hold match/set key for 10s, until the RUN LED indicator turn yellow, then release, the controller will become CCT type, then do smart cong by tuya APP, or short press match key to match with CCT RF remote. + - Single color LED strip + C W W W W W L E D O U T P U T Push Dim C W W W W W L E D O U T P U T Push Dim Push Switch Note: 1. User can connect constant voltage power supply or power adapter as power input. 2. Press and hold Match/Set key for 2s, switch 2 kinds light type in sequence. 3. Switch off the power, then switch on power, repeat again. Immediately short press match key 3 times, the light on/off time will change between 3s and 0.5s. 4. For CCT light, continuous power off and on will change 3 levels color temperature (WW, NW and CW) in sequence. Push Dim ON/OFF Turn on at 100% or 10%(night light) and vice-versa Dimming UP/DOWN Dimming UP/DOWN Click Double Click Long press(>1s) from OFF Long press(>1s) from ON DIM Single color CCT Dual Color ON/OFF Turn on at 100% or 10%(night light) and vice-versa Color temperature UP/DOWN (turn off and turn on to return dimming) Dimming UP/DOWN Click Double Click Long press(>1s) from OFF Long press(>1s) from ON 2 User Manual Ver 2.0.1 Push Switch Tuya APP interface Touch brightness slide to adjust brightness. Touch color wheel to adjust color temperature. Touch brightness slide to adjust brightness. DIM CCT DIM: CCT: DIMCCT WT1 match remote control (Optional) Use the WT1’s Match key Match: Short press match key of WT1, immediately press on/off key (single zone remote) or zone key (multiple zone remote) on the remote. The LED indicator fast flash a few times means match is successful. Use Power Restart Match: Switch off the power of WT1, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful. Delete: Switch off the power of WT1, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted. Delete: Press and hold match key of WT1 for 15s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted. End user can choose the suitable match/delete ways. Two options are offered for selection: WT1 work as WiFi-RF converter to match RF LED controller or dimming driver Use the controller’s Match key Match: Short press match key of the controller, immediately press on/off key on the Tuya APP. The LED…

Text truncated - open the document above for the full version.

GUANGZHOU SKYDANCE CO.,LTD Section 2.911(d)(5)(i) Certification – Equipment Type Company name: GUANGZHOU SKYDANCE CO.,LTD Address: 2-3 Floor, Building A, No.36, Zhongsan, Shiguang Road, Zhongcun Street, Panyu District, Guangzhou, China Product Name: WiFi& RF 2CH LED Controller FCC ID: 2BDBM-WT1 Model(s): WT1 2.911(d)(5)(i) Equipment Type We, [GUANGZHOU SKYDANCE CO.,LTD ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: feifei.chen Date: 2023-1 1-1 Title and Company name: Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

GUANGZHOU SKYDANCE CO.,LTD Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: GUANGZHOU SKYDANCE CO.,LTD Address: 2-3 Floor, Building A, No.36, Zhongsan, Shiguang Road, Zhongcun Street, Panyu District, Guangzhou, China Product Name: WiFi& RF 2CH LED Controller FCC ID: 2BDBM-WT1 Model(s): WT1 2.911(d)(5)(ii) Applicant filing We, [GUANGZHOU SKYDANCE CO.,LTD ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: feifei.chen Date: 2023-11-1 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

GUANGZHOU SKYDANCE CO.,LTD Section 2.911(d)(7) USA Agent for Service of Process Company name: GUANGZHOU SKYDANCE CO.,LTD Address: 2-3 Floor, Building A, No.36, Zhongsan, Shiguang Road, Zhongcun Street, Panyu District, Guangzhou, China Product Name: WiFi& RF 2CH LED Controller FCC ID: 2BDBM-WT1 Model(s): WT1 2.91 1(d)(7) USA Designated Agent for Service of Process W e, [ GUANGZHOU SKYDANCE CO.,LTD ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. A gent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 F RN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: GUANGZHOU SKYDANCE C O. , LT D Address: 2-3 Floor, Building A, No.36, Zhongsan, Shiguang Road, Zhongcun Street, Panyu District, Guangzhou, China FRN: 0034376343 FCC Grantee Code: 2BDBM Contact Name: feifei.chen Tel ephone No: 020-84719740 Email: [email protected] 2.911 (d)(7)USA Agent v1.2 GUANGZHOU SKYDANCE CO.,LTD Signature: Title: Manager Signature: Title: Manager Date: 2023-11-1 Date: 2023-11-1 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to -the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

GUANGZHOU SKYDANCE CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-11-1 Subject; Request for Long Term Confidentiality FCC ID: 2BDBM-WT1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: feifei.chen Title: Manager

Model:WT1 External Model:WT1 Model:WT1

Label & Location SKYDANCE WiFi& RF 2CH LED Controller Model: WT1 FCC ID: 2BDBM-WT1 Contains FCC ID: 2ANDL-CB3S

Model:WT1 Internal Model:WT1

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: GUANGZHOU SKYDANCE CO., LTD Address: 2-3 Floor, Building A, No.36, Zhongsan, Shiguang Road, Zhongcun Street, Panyu District, Guangzhou, China EUT Name: WiFi& RF 2CH LED Controller Brand Name: SKYDANCE Model Number: WT1 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230925R00502 Test Standards: 47 CFR Part 2 Subpart J Section 2.1091 FCC ID: 2BDBM-WT1 Test Conclusion: Pass Test Date: 2023-09-26 to 2023-10-23 Date of Issue: 2023-10-24 Prepared By: Aria Zhang / Project Engineer Date: 2023-10-24 Approved By: Ryan.CJ / EMC Manager Date: 2023-10-24 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230925R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-10-24 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230925R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 6 Test Report Number: BTF230925R00502 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and approving the test report. (3) The test report is invalid i…

Text truncated - open the document above for the full version.

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page1of49 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RFTestReport For ApplicantName:GUANGZHOUSKYDANCECO.,LTD Address: 2-3Floor,BuildingA,No.36,Zhongsan,ShiguangRoad,Zhongcun Street,PanyuDistrict,Guangzhou,China EUTName:WiFi&RF2CHLEDController BrandName:SKYDANCE ModelNumber:WT1 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF230925R00501 TestStandards:47CFRPart15.247 TestConclusion:Pass FCCID:2BDBM-WT1 TestDate:2023-09-26to2023-10-23 DateofIssue:2023-10-24 PreparedBy: AriaZhang/ProjectEngineer Date:2023-10-24 ApprovedBy: Ryan.CJ/EMCManager Date:2023-10-24 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF230925R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page2of49 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-10-24Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF230925R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page3of49 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1INTRODUCTION..........................................................................................................................................5 1.1IdentificationofTestingLaboratory...............................................................................................5 1.2IdentificationoftheResponsibleTestingLocation......................................................................5 1.3Announcement.................................................................................................................................5 2PRODUCTINFORMATION.........................................................................................................................6 2.1ApplicationInformation...................................................................................................................6 2.2ManufacturerInformation................................................................................................................6 2.3FactoryInformation.........................................................................................................................6 2.4GeneralDescriptionofEquipmentunderTest(EUT)...................................................................6 2.5TechnicalInformation......................................................................................................................6 3SUMMARYOFTESTRESULTS.................................................................................................................7 3.1TestStandards..................................................................................................................................7 3.2UncertaintyofTest...........................................................................................................................7 3.3SummaryofTestResult..................................................................................................................7 4TESTCONFIGURATION.............................................................................................................................8 4.1TestEquipmentList.........................................................................................................................8 4.2TestAuxiliaryEquipment..............................................................................................................10 4.3TestModes......................................................................................................................................10 5EVALUATIONRESULTS(EVALUATION).................................................................................................11 5.1Antennarequirement.....................................................................................................................11 5.1.1Conclusion:...........................................................................................................................11 6RADIOSPECTRUMMATTERTESTRESULTS(RF)...............................................................................12 6.1ConductedEmissionatACpowerline........................................................................................12 6.1.1E.U.T.Operation:..................................................................................................................12 6.1.2TestSetupDiagram:.............................................................................................................12 6.1.3TestData:.............................................................................................................................13 6.2OccupiedBandwidth.....................................................................................................................15 6.2.1E.U.T.Operation:..................................................................................................................15 6.2.2TestSetupDiagram:.............................................................................................................15 6.2.3TestData:...................................................…

Text truncated - open the document above for the full version.

1. Description 2. L oca t i o n 3. Bluetooth TRP Test Bluetooth TRP Result Frequency (MHz) 2478 TRP(dBm) 1.46 NHPRP(dBm) 45 0.27 MAX(dBm) 6.02 EIRP peak 6.02 Min(dBm) - 11.77 Attenuation Horizontal 41.17 Attenuation Vertical 41.16 Company Shenzhen ATWE Antenna Co., Ltd Antenna model A01 Ga in ： 2.5 dbi T yp e ： Copper antenna 4.Bluetooth TIS Test Bluetooth TIS Result Frequency (MHz)2478 TIS(dBm)-85.74 NHPIS(dBm) 45-84.56 RSSIAve2.37 MaxPosRSSI5.7 MaxPosSens-89.08 MAX(dBm)6.93 EIS peak6.93 Min(dBm)-10.86 Attenuation Horizontal42.08 Attenuation Vertical42.07

Model:WT1 Conducted Emission at AC power line Band edge emissions (Radiated) Emissions in frequency bands (above 1GHz) Model:WT1 Emissions in frequency bands (below 1GHz)