2BG9T-TCLD2BHD2 Series Smart Door Lock

Customer Service Call Us United states: 1-(833)838-3931 Monday to Friday: 9:00 AM - 9:00 PM(PT) Saturday and sunday: 9:00 AM - 6:00 PM(PT) Email Us Customer support: [email protected] Shenzhen TCL Smart Home Technology Co., Ltd. 7/F,TCL G1 Building. TCL International E City, No.1001 Zhongshan Yuan Road,Nanshan District,Shenzhen. User Manual D2 Series Smart Door Lock ModelD2 Pro-H V01 Contents Part List..................................................................... 01 Product Overview................................................. 02 Installation............................................................... 03 Lock Setup.............................................................. 13 Using your lock.................................................... 17 FAQ...................................................................... 18 Disclaimer............................................................... 19 Statement............................................................. 20 Exterior Exterior AssemblyInterior Assembly Latch Bolt Strike (box) Mounting PlateBackup key Lithium BatteryUser Manual Guide User Manual Screws A Screws C Screws B Interior ① ① ② ② ③ ③ ④ ④ ⑤ ⑤ ⑥ ⑥ ⑦ ⑦ ⑨ ⑨ ⑧ ⑧ ① ① ② ② ③ ③ ④ ④ ⑤ ⑤ ⑥ ⑥ Palm vein scanner Touch keypad Card recognition area Doorbell Short-pressConfirm Long-pressLock the door Indicator light: Greensuccessfully Redfailed Flash whiteoperating Cylinder Type-C port Emergency Power Support Loudspeaker Battery Cover 10000mAh Lithium Battery Setup Button One-tap Unlock/Lock Knob Loudspeaker Card 2. Product Overview1. Parts List 0102 3. Installation Step 1 Installation Overview Scan the QR code to watch the video of installation guide Key Exterior Assemble Mounting Plate Screws(A) Latch Strike(box) Interior Assemble Battery Cover Screws(B) Screws(C) 0403 Step 2 Check the door’s dimensions ①Check if your door has holes like the one below, Standard US doors are already compatible. ②If you have a new door, please drill the holes according to Drill Template. Backset Door Hole Diameter 2.36in/60mm or 2.76in/70mm 0.98in/25mm Door Thickness 1.38in/35mm~ 2.17in/55mm Cross Bore Diameter 1.50in/38mm~ 2.13in/54mm Step 3 Install Bolt 1.Check your door to see if the deadbolt requires adjustment. If the backset is 2.76in/70mm, turn the faceplate180° to extend the length. Latch Hole Backset 2. Insert and screw the deadbolt into the doorframe. Make sure the word "UP" on the bolt faces up. 2.36 in/60mm 2.76 in/70mm 1 2 3 Screws(A) Latch 180° 0506 0807 Step 4 Install Bolt If you have an existing strike plate installed, skip this step. To install the strike plate: 1.Align the strike plate with the center hole of the deadbolt. 2.Secure the strike plate with screws A. Make sure the plate is placed in the correct direction. Screws(A) Strike Strike Box Step 5 Installing Exterior Assembly If you have a 2.13 in / 54mm cross bore, you can go with installation directly. Cross Bore Diameter 2.13in /54mm Don’t be disassembled Cross Bore Diameter 1.50in /38mm If you have a 1.50in/38mm cross bore,remove the spacer before installation. UP 1.Keep Bolt retracted and the cylinder tailpiece horizontal. 2.Install Exterior Assembly.Please do not insert the mechanical key during installation.The cable goes through the hole below Bolt. Step 7 Install the Interior Assembly Upside Down Note: Check carefully whether the wire is stuck or tangled. lf the wire is stuck, re-install the lnterior Assembly. 1.Wire to the interior assembly ! 0910 Step 6 Install the Mounting 1.Route the cable through the hole on Mounting Plate. 2.Secure Interior Assembly Mounting Plate to Exterior Assembly using Screws C. Tool required: All you need is a manual screwdriver or an electronic screwdriver. Screws C 2.Rotate the knob and keep it in a vertical position to remain unlocked. 3. Attach the interior assembly to the mounting plateand check if the bolt retracts by turning the knob. 4.Tighten the interior Assembly with screws B Screw(B) Step 8 Install the Battery 1.Fully charge the battery before first use, lt might take about 6 hours. If the status indicator flashes red and green while charging, the lithium battery is abnormal. Stop charging and contact customer support immediately. Notice 2. Align the pin connector on the battery with the pin as illustrated below and slide the battery into the battery compartment. ！ 1211 4. Lock Setup 1.Download the TCL Home app from Google Play or App Store Google Play and the Google Play logo are trademarks of Google Inc. Apple and the Apple logo are trademarks of Apple Inc. Scan QR code to download the App 2.Create a User Account Add devices manuallyPress and hold the“Set” button for 5s to enter pairing mode. 3.Add the Smart Door Lock Auto-detecting nearby devices Add devices 1314 Connecting Wi-Fi Door lock calibration (required) Set Master Password (required)Start to Use 4.APP Homepage Overview Door Lock setting Long Press to Unlock/Lock User ManagementAdd Users and permissions One-time PasswordValid for 10 minutes Home AssistantHomecoming Reminder/Summary) EventsAll event history Images shown above are for reference only. Actual features may vary in the app. Notice Notice Please securely safeguard the master password to prevent unauthorized access. The master password is applied to: Unlock the door. Disable Away mode. 1615 5. Using your lock Palm vein recognition defaults to Auto mode. Adjust recognition method in Settings > Human Detection. 3.How to reset the lock After connecting the device to the network, press and hold the 'SET' button for 5 seconds, then press the 'Confirm/Lock' button on the keypad to reset the door lock. This will restore factory defaults and erase all user data. If you are TCL Home app owner, Clicking "Remove Device" from app only removes the pairing, Existing access permissions stay active. SET OPEN/CLOSE QHow many passwords and palm vein can the lock store? AUp to 50 palm veins and 50 passwords. Q What temperatures can the lock handle? A Th…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RF EUT External Photos External Photos Page 1 / 5 External Photos Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RF EUT External Photos External Photos Page 2 / 5 Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RF EUT External Photos External Photos Page 3 / 5 Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RF EUT External Photos External Photos Page 4 / 5 Exterior Assembly Interior Assembly Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RF EUT External Photos External Photos Page 5 / 5 ***** END ***** ***** END ***** ***** END ***** ***** END ***** Note # : Type-C port: Emergency Power Support

Label Label Location Exterior Assembly Interior Assembly

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 7 TR-4-E-R052 TEST REPORT Applicant Name: Shenzhen TCL Smart Home Technology Co., Ltd. Address: 7/F, TCL G1 Building. TCL International E City, No.1001 Zhongshan Yuan Road, Nanshan District, Shenzhen Report Number: 2504X16951E-RF-00E FCC ID: 2BG9T-TCLD2BH Test Standard (s) 47 CFR §2.1091 Sample Description Product Type: D2 Series Smart Door Lock Model No.: D2 Pro-H Trade Mark: TCL Date Received: 2025-09-09 Report Date: 2025-11-25 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Bob.Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RF-00E Rev:A/4.0(2024/11/01) Page 2 of 7 TR-4-E-R052 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 3 GENERAL INFORMATION ............................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 4 OBJECTIVE ................................................................................................................................................... 4 TEST FACILITY .............................................................................................................................................. 4 RF EXPOSURE .............................................................................................................................................. 5 APPLICABLE STANDARD ................................................................................................................................. 5 TEST RESULT: .............................................................................................................................................. 6 EXHIBIT A-EUT PHOTOGRAPHS ................................................................................................................ 7 Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RF-00E Rev:A/4.0(2024/11/01) Page 3 of 7 TR-4-E-R052 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision Rev.00 2504X16951E-RF-00E Original Report 2025-11-25 Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RF-00E Rev:A/4.0(2024/11/01) Page 4 of 7 TR-4-E-R052 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product Name D2 Series Smart Door Lock Tested Model D2 Pro-H Voltage Range # DC 3.635V from lithium battery Note 1: The device (D2 Series Smart Door Lock) has two parts: Exterior Assembly and Interior Assembly. Note 2: The Exterior Assembly has NFC/BLE/5.8G Radar function. Note 3: The Interior Assembly has BLE/2.4G WIFI function. Frequency Range NFC: 13.56MHz BLE: 2402-2480MHz 2.4G Wi-Fi: 2412-2462MHz/2422-2452MHz 5.8G Radar: 5780-5840MHz Maximum Conducted Output Peak Power (actual test result) Exterior Assembly: BLE: -1.23dBm Interior Assembly: BLE: 1.53dBm, 2.4G Wi-Fi: 14.05dBm Antenna Specification # Exterior Assembly: PCB Antenna BLE Antenna gain: 0.29dBi 5.8G Radar Antenna gain: 2.0dBi Interior Assembly: FPC Antenna BLE&2.4G WIFI Antenna gain: 3.7dBi (The antenna gain is provided by the applicant.) Sample Serial Number For Radiated Spurious Emissions Test: 39R9-2 For RF Conducted Test: 39R9-1 (Assigned by ATC, Shenzhen) Sample/EUT Status Good condition Objective This test report is in accordance with Part 2-Subpart J, Part 15-Subparts C and Part 2-Subpart J, Radiofrequency Radiation Exposure of the Federal Communication Commission rules. The tests were performed in order to determine compliance with FCC §2.1091 rules. Test Facility The test site used by Shenzhen Accurate Technology Co., Ltd. to collect test data is located on the Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Accredited by American Association for Laboratory Accreditation (A2LA).The Certificate Number is 4297.01. Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RF-00E Rev:A/4.0(2024/11/01) Page 5 of 7 TR-4-E-R052 RF EXPOSURE Applicable Standard According to subpart 2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (Minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density MPE Calculated Formulary: Predication of MPE limit at a given distance S = 2 4R PG  S = power density (in appropriate units,…

Text truncated - open the document above for the full version.

The information marked ―#‖ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ▲.This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 44 TR-4-E-R159 TEST REPORT Applicant Name: Shenzhen TCL Smart Home Technology Co., Ltd. Address: 7/F, TCL G1 Building. TCL International E City, No.1001 Zhongshan Yuan Road, Nanshan District, Shenzhen Report Number: 2504X16951E-RFA FCC ID: 2BG9T-TCLD2BH IC: 34178-TCLD2BH Test Standard (s) FCC PART 15.225 RSS-GEN ISSUE 5, FEBRUARY 2021 AMENDMENT 2 RSS-210, ISSUE 11, JUNE 25, 2024 Sample Description Product Name: D2 Series Smart Door Lock Model No.: D2 Pro-H Trade Mark: TCL Date Received: 2025-09-09 Report Date: 2025-11-25 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Bob.Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RFA Rev:A/4.0(2024/11/01) Page 2 of 44 TR-4-E-R159 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 3 GENERAL INFORMATION ............................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 4 OBJECTIVE ................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................... 4 TEST FACILITY .............................................................................................................................................. 5 MEASUREMENT UNCERTAINTY ....................................................................................................................... 5 SYSTEM TEST CONFIGURATION ............................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION......................................................................................................... 6 EUT EXERCISE SOFTWARE ........................................................................................................................... 6 EQUIPMENT MODIFICATIONS .......................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................... 6 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................. 6 MMARY OF TEST RESULTS ........................................................................................................................ 8 TEST EQUIPMENT LIST ............................................................................................................................... 9 ANTENNA REQUIREMENT......................................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................... 10 ANTENNA CONNECTED CONSTRUCTION ....................................................................................................... 10 RADIATED EMISSIONS TEST .................................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................... 11 EUT SETUP ................................................................................................................................................ 11 EMI TEST RECEIVER SETUP ........................................................................................................................ 12 CALCULATION ............................................................................................................................................. 12 TEST DATA ................................................................................................................................................. 13 FREQUENCY STABILITY............................................................................................................................ 36 APPLICABLE STANDARD ............................................................................................................................... 36 TEST PROCEDURE ...................................…

Text truncated - open the document above for the full version.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ▲.This report must not be used by the client to claim product certification, approval, or endorsement by A2LA, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 51 TR-4-E-R026 TEST REPORT Applicant Name: Shenzhen TCL Smart Home Technology Co., Ltd. Address: 7/F, TCL G1 Building. TCL International E City, No.1001 Zhongshan Yuan Road, Nanshan District, Shenzhen Report Number: 2504X16951E-RF-00D FCC ID: 2BG9T-TCLD2BH Test Standard (s) FCC PART 15.249 Sample Description Product Name: D2 Series Smart Door Lock Model No.: D2 Pro-H Trade Mark: TCL Date Received: 2025-09-09 Report Date: 2025-11-25 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Roger.Ling Bob.Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2504X16951E-RF-00D Rev:A/4.0(2024/11/01) Page 2 of 51 TR-4-E-R026 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 3 GENERAL INFORMATION ............................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 4 OBJECTIVE ................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................... 4 TEST FACILITY .............................................................................................................................................. 5 SYSTEM TEST CONFIGURATION ............................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION......................................................................................................... 6 EUT EXERCISE SOFTWARE AND POWER LEVEL # ............................................................................................ 6 SPECIAL ACCESSORIES ................................................................................................................................. 6 EQUIPMENT MODIFICATIONS .......................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................... 7 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................. 7 SUMMARY OF TEST RESULTS ................................................................................................................... 8 TEST EQUIPMENT LIST ............................................................................................................................... 9 ANTENNA REQUIREMENT......................................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................... 10 ANTENNA CONNECTOR CONSTRUCTION ....................................................................................................... 10 RADIATED EMISSIONS & OUTSIDE OF BAND EMISSION ..................................................................... 11 APPLICABLE STANDARD ............................................................................................................................... 11 EUT SETUP ................................................................................................................................................ 11 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .................................................................................. 13 TEST PROCEDURE ...................................................................................................................................... 13 CALCULATION ............................................................................................................................................. 14 TEST DATA ................................................................................................................................................. 14 20DB EMISSION BANDWIDTH ................................................................................................................... 46 APPLICABLE STANDARD ...............…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RFA Test Photos Test Photos Page 1 / 2 With Card Radiated Spurious Emissions Test View (9kHz-30MHz) Radiated Spurious Emissions Test View (30MHz-1GHz) Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RFA Test Photos Test Photos Page 2 / 2 Without Card Radiated Spurious Emissions Test View (9kHz-30MHz) Radiated Spurious Emissions Test View (30MHz-1GHz) ***** END *****

Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RFC Test Photos Test Photos Page 1 / 2 Radiated Spurious Emissions Test View (9kHz-30MHz) Radiated Spurious Emissions Test View (30MHz-1GHz) Shenzhen Accurate Technology Co., Ltd. No.: 2504X16951E-RFC Test Photos Test Photos Page 2 / 2 Radiated Spurious Emissions Test View (1GHz-18GHz) Radiated Spurious Emissions Test View (Above 18GHz) ***** END *****