2BQHT-TAB-T126-8Tablet PC

13245 9810 111213 Manual de Usuario Tablet PCTablet PC Especificaciones técnicas Procesador: MT8781 Sistema operativo: Powered by Android™ RAM: 8GB DDR Almacenamiento: 128GB Pantalla: 12.6 pulgadas, 1600 x 2560 Pantalla: Pantalla IPS y pantalla táctil de 10 puntos Audio: MP3, AAC, AAC+, AMR-NB, etc. Video: MP4, OGM, 3GP, AVI, etc. Imagen: JPG, JPEG, GIF, BMP, PNG, etc. Batería: 11000mAh, 3.85V Adaptador: Carga TIPO-C, 9V, 2A Cámara: Frontal 8.0 MP, Trasera 13.0 MP Red: 2G/3G/4G Wi-Fi: IEEE 802.11 b/g/n/ac, 2.4Ghz + 5.0Ghz Bluetooth: BT 5.0 Puertos: Micro TF / Micro SIM / Tipo-C Las especificaciones y este manual están sujetos a cambios sin previo aviso. Google, Android, Google Play y YouTube son marcas registradas de Google LLC Contenido de la caja del producto Tablet(batería integrada en el dispositivo), cargador, cable USB, manual de usuario Vista general En este manual de usuario, las especificaciones mostradas en las imágenes y las partes indicadas en el contenido de la caja pueden variar según el modelo. Las imágenes son representativas. Solución de problemas SSi detectas una condición inusual en tu dispositivo, puedes intentar resolver el problema consultando la descripción en la tabla. PROBLEMA RAZÓNSOLUCIÓN La tablet no se conecta a LAN ni a Wi-Fi. La señal entrante es demasiado baja. La señal puede ser débil o mala. Si estás en el suelo, la recepción de la señal puede reducirse. Cambia de lugar y vuelve a intentarlo. Saltos en pantalla táctil Quizás tus manos estén mojadas, el software de la tablet o la pantalla táctil no pueden detectar la operación táctil. Al tocar la pantalla táctil, asegúrate de que esté seca. Si la pantalla táctil está rayada o dañada, por favor contáctanos. Bloqueos intermitentes o la tablet deja de responder Puede que haya demasiadas aplicaciones en funcionamient o. La tablet emite pitidos y el ícono de la batería parpadea. Tu batería está débil. Para continuar usando el dispositivo, recárgalo. Mensaje de error de la cámara de la tablet No hay suficiente memoria o la batería está débil. Carga la batería. Transfiere archivos a una PC o libera espacio eliminando algunos archivos de la memoria. La tablet no enciende al sacarla de la caja. Baja energía Conecta el adaptador de corriente a la toma de pared y luego a la tablet. La tablet debería encenderse. Se recomienda cargar el dispositivo durante 8 horas antes del primer uso. Para un dispositivo completamente descargado, déjalo conectado y apagado por lo menos 12 horas. No se puede establecer conexión con su computadora. Compatible con el conector USB o PC, los controladores más recientes no están instalados. Si estás usando el cable USB con tu dispositivo, asegúrate de que sea compatible. Tu PC debe tener instalados los controladores correctos y asegúrate de actualizarlos. Eliminación de su dispositivo de manera ecológica Este símbolo en el producto o en su embalaje indica que el producto no debe tratarse como un residuo doméstico común. En su lugar, debe llevarse al punto de recolección correspondiente para el reciclaje de equipos electrónicos. Si elimina este producto correctamente, podrá evitar posibles consecuencias negativas para el medio ambiente y la salud humana derivadas del tratamiento inadecuado de los residuos. El reciclaje de materiales ayuda a conservar los recursos naturales.Para obtener más información sobre el reciclaje de este producto, por favor comuníquese con su municipio local, el servicio de gestión de residuos domésticos o la tienda donde compró el producto. Sugerencias para el ahorro de energía Cuando no esté utilizando el dispositivo, apague funciones como el Wi-Fi y el Bluetooth. Si es necesario, desactive sonidos innecesarios como las notificaciones de aplicaciones o el sonido de las teclas. Según sus necesidades, reducir el brillo de la pantalla y el volumen le permitirá usar la energía de manera más eficiente. Eliminación adecuada de la batería (Para países con sistemas de recolección separados) La marca en la batería, la guía y el compartimento de almacenamiento indica que esta batería no debe desecharse junto con otros residuos domésticos. Los símbolos químicos Hg, Cd o Pb indican que la batería contiene mercurio, cadmio o plomo por encima de los valores de referencia especificados en la Directiva 2006/66/CE. La batería suministrada con este producto no puede ser reemplazada por el usuario. Para obtener información detallada sobre el reemplazo, por favor contacte con su proveedor de servicio. No intente quitar la batería ni arrojarla al fuego. No la desarme, aplaste ni perfore. Si planea desechar el producto, se tomarán las medidas necesarias en el ámbito de gestión de residuos. Android es una marca registrada de Google LLC 67 Cumplimiento con la Parte 15 de las Reglas de la FCC Este equipo ha sido probado y se ha encontrado que cumple con los límites para un dispositivo digital de Clase B, conforme a la parte 15 de las Reglas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencia perjudicial a las radiocomunicaciones. Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación particular. Si este equipo causa interferencia perjudicial a la recepción de radio o televisión, lo cual se puede determinar apagando y encendiendo el equipo, se recomienda al usuario que intente corregir la interferencia mediante una o más de las siguientes medidas: . Reorientar o reubicar la antena receptora. . Aumentar la separación entre el equipo y el receptor. . Conectar el equipo a un tomacorriente en un circuito diferente al que está conectado el receptor. . Consultar al distribuidor o a un técnico experimentado en radio/televisión para obtener ayuda. Precaución: Cualquier cambio o modificación a este dispositivo …

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. SAR Test Report Report No.: STS2510054H01 Issued for DAMASCO TRADING LLC 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Product Name: Tablet PC Brand Name: N/A Model Name: TAB-T126-8,TAB-T126-******* (“*”= 0-9, A- Z, a-z, -, \, / or space) Series Model(s): TAB-T126-******* “*”= 0-9, A-Z, a-z, -,\, / or space represent different appearance colors, sales regions, sales channels. This change is only for promotional purposes and does not affect the safety and electromagnetic compatibility of the product. FCC ID: 2BQHT- TAB-T126-8 Test Standard: ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 Max. Report SAR (1g) Body: 1.232 W/kg Page 2 of 86 Report No.: STS2510054H01 TEST REPORT CERTIFICATION Applicant’s name ................. : DAMASCO TRADING LLC Address ................................. : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Manufacturer's Name .......... : DAMASCO TRADING LLC Address ................................. : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Product description Product name ........................ : Tablet PC Brand name ......................... : N/A Model name ......................... : TAB-T126-8,TAB-T126-******* (“*”= 0-9, A-Z, a-z, -, \, / or space) Series Model .......................... : TAB-T126-******* “*”= 0-9, A-Z, a-z, -,\, / or space represent different appearance colors, sales regions, sales channels. This change is only for promotional purposes and does not affect the safety and electromagnetic compatibility of the product. Standards ............................. : ANSI/IEEE Std. C95.1 FCC 47 CFR Part 2 (2.1093) IEEE Std. 1528-2013 The device was tested by Shenzhen STS Test Services Co., Ltd. in accordance with the measurement methods and procedures specified in KDB 865664 The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Date of Test ........................................... : Date (s) of performance of tests ............. : 28 Oct. 2025 ~ 31 Oct. 2025 Date of Issue .......................................... : 08 Nov. 2025 Test Result.............................................. : Pass Testing Engineer : (Xin.Liu) Technical Manager : (Shifan. Long) Authorized Signatory : (Bovey Yang) Page 3 of 86 Report No.: STS2510054H01 Table of Contents 1. General Information ................................................................................................................. 5 1.1 EUT Description .................................................................................................................. 5 1.2 Test Environment ................................................................................................................ 7 1.3 Test Factory ........................................................................................................................ 7 2. Test Standards and Limits ....................................................................................................... 8 3. SAR Measurement System ...................................................................................................... 9 3.1 Definition of Specific Absorption Rate (SAR) ....................................................................... 9 3.2 SAR System ....................................................................................................................... 9 4. Tissue Simulating Liquids ..................................................................................................... 12 4.1 Simulating Liquids Parameter Check ................................................................................ 12 5. SAR System Validation .......................................................................................................... 15 5.1 Validation System ............................................................................................................. 15 5.2 Validation Result ............................................................................................................... 16 6. SAR Evaluation Procedures .................................................................................................. 17 7. EUT Antenna Location Sketch .............................................................................................. 18 8. EUT Test Position ................................................................................................................... 23 9. Uncertainty ............................................................................................................................. 24 9.1 Measurement Uncertainty ................................................................................................. 24 10. Conducted Power Measurement ......................................................................................... 27 10.1 Test Result ...................................................................................................................... 27 11. EUT and Test Setup Photo ................................................................................................... 38 11.1 EUT Photo....................................................................................................................... 38 11.2 Setup Photo .................................................................................................................... 41 12. SAR Result Summary .......................................................................................................... 43 12.1 Body-worn SAR ......................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 Report No.: psi2509211-C01-R13 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Appendix I Test Setup Photo FCC ID: 2BQHT-TAB-T126-8 Spurious Radiation Emissions Test (<1G) Spurious Radiation Emissions Test (＞1G) Page 2 of 2 Report No.: psi2509211-C01-R13 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Conducted emission Test ------End------

2BQHT-TAB-T126-8_SARSetupphotos BackSide(separationdistanceis0mm) Rightside(separationdistanceis0mm) Topside(separationdistanceis0mm)

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 23 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2BQHT-TAB-T126-8 On Behalf of DAMASCO TRADING LLC Tablet PC Model No.: TAB-T126-8,TAB-T126-*******(“*”= 0-9, A-Z, a-z, -,\, / or space) Prepared for : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Report Number : psi2509211-C01-R17 Date of Receipt : September 28, 2025 Date of Test : September 28, 2025–October 30, 2025 Date of Report : October 31, 2025 Version Number : V0 Page 2 of 23 Report No.: psi2509211-C01-R17 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ------------------------------------------------------------------------------------------------- 5 1.1.Description of Device (EUT) ------------------------------------------------------------------------------------------- 5 1.2.Accessories of Device (EUT) ------------------------------------------------------------------------------------------ 6 1.3.Tested Supporting System Details ----------------------------------------------------------------------------------- 6 1.4.Block Diagram of connection between EUT and simulators --------------------------------------------------- 6 2. TEST EQUIPMENT LIST ---------------------------------------------------------------------------------------------------- 7 3. SUMMARY OF MEASUREMENT ----------------------------------------------------------------------------------------- 8 3.1. Summary of test result ---------------------------------------------------------------------------------------------- 8 3.2. Equipment Type ------------------------------------------------------------------------------------------------------ 8 3.3. Channel list ------------------------------------------------------------------------------------------------------------ 9 3.4. Test Conditions and channel ------------------------------------------------------------------------------------ 10 3.5. Measurement Uncertainty (95% confidence levels, k=2) ------------------------------------------------- 10 3.6. Test Facility ---------------------------------------------------------------------------------------------------------- 10 4. DFS PARAMETERS --------------------------------------------------------------------------------------------------------- 11 4.1. DFS Parameters ---------------------------------------------------------------------------------------------------- 11 4.2. Calibration Setup and DFS Test Results --------------------------------------------------------------------- 17 4.2.1. Calibration of Radar Waveform --------------------------------------------------------------------------------- 17 4.2.1.1. Radar Waveform Calibration Procedure ------------------------------------------------------------- 17 4.2.1.2. Conducted Calibration Setup -------------------------------------------------------------------------- 17 4.2.1.3. Calibration Deviation ------------------------------------------------------------------------------------- 17 4.2.1.4. Radar Waveform Calibration Result ------------------------------------------------------------------ 18 4.3. In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period ---------------------------------------------------------------------------------------------------- 19 4.3.1. Limit of In-Service Monitoring ----------------------------------------------------------------------------------- 19 4.3.2. Test Procedures ---------------------------------------------------------------------------------------------------- 19 4.3.3. Test Setup --------------------------------------------------------------------------------------------------------------- 20 4.3.4. Test Deviation ----------------------------------------------------------------------------------------------------------- 20 4.3.5. Result of Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period for Client Beacon Test 20 4.3.6. Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period for Client Beacon Test Plots ------------------------------------------------------------------------------------------------------------ 21 4.3.7. Data Traffic and Noise Floor Plots ------------------------------------------------------------------------------ 22 5. Photos Of Test Setup ----------------------------------------------------------------------------------------------------- 23 6. Photos Of EUT -------------------------------------------------------------------------------------------------------------- 23 Page 3 of 23 Report No.: psi2509211-C01-R17 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TEST REPORT DECLARATION Applicant : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Manufacturer : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA EUT Description : Tablet PC (A) Model No. : TAB-T126-8,TAB-T126-*******(“*”= 0-9, A-Z, a-z, -,\, / or space) (B) Trademark : N/A Measurement Standard Used: FCC Part 15 Subpart E, FCC KDB 905462 D02, FCC KDB 905462 D03 ANSI C63.10:2020 Test Result: PASS The device describ…

Text truncated - open the document above for the full version.

Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Page 1 of 161 Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China FCC TEST REPORT FCC ID: 2BQHT-TAB-T126-8 On Behalf of DAMASCO TRADING LLC Tablet PC Model No.: TAB-T126-8,TAB-T126-*******(“*”= 0-9, A-Z, a-z, -,\, / or space) Prepared for : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Prepared By : Shenzhen PSI Testing Co., Ltd. Address : 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Report Number : psi2509211-C01-R16 Date of Receipt : September 28, 2025 Date of Test : September 28, 2025–October 30, 2025 Date of Report : October 31, 2025 Version Number : V0 Page 2 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TABLE OF CONTENTS Description Page 1 TEST SUMMARY ..................................................................................................................................... 5 1.1 MEASUREMENT UNCERTAINTY............................................................................................................. 5 2 GENERAL INFORMATION ...................................................................................................................... 6 2.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 6 2.2 TEST MODE ........................................................................................................................................ 7 2.3 TEST FACILITY .................................................................................................................................... 7 2.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 2.5 DEVIATION FROM STANDARDS ............................................................................................................. 8 2.6 ABNORMALITIES FROM STANDARD CONDITIONS.................................................................................... 8 2.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 8 2.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 8 2.9 TEST CONDITIONS .............................................................................................................................. 8 3 TEST INSTRUMENTS LIST ..................................................................................................................... 9 4 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 10 4.1 ANTENNA REQUIREMENT: .................................................................................................................. 10 4.2 CONDUCTED EMISSIONS ................................................................................................................... 11 4.3 EMISSION BANDWIDTH AND 99% OCCUPIED BANDWIDTH .................................................................... 14 4.4 MAXIMUM CONDUCTED OUTPUT POWER ............................................................................................ 85 4.5 POWER SPECTRAL DENSITY .............................................................................................................. 91 4.6 BAND EDGE .................................................................................................................................... 126 4.7 RADIATED EMISSION ....................................................................................................................... 153 4.8 FREQUENCY STABILITY .................................................................................................................... 159 5 PHOTOS OF TEST SETUP .................................................................................................................. 161 6 PHOTOS OF EUT ................................................................................................................................. 161 Page 3 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China TEST REPORT DECLARATION Applicant : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA Manufacturer : DAMASCO TRADING LLC Address : 3847 NE 168TH ST APT 3C NORTH MIAMI BEACH 33160 FLORIDA USA EUT Description : Tablet PC (A) Model No. : TAB-T126-8,TAB-T126-*******(“*”= 0-9, A-Z, a-z, -,\, / or space) (B) Trademark : N/A Measurement Standard Used: FCC Rules and Regulations Part 15 Subpart E ANSI C63.4:2014, ANSI C63.10:2020 Test Result: PASS The device described above is tested by Shenzhen PSI Testing Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart E limits both conducted and radiated emissions. The test results are contained in this test report and Shenzhen PSI Testing Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests. After the test, our opinion is that EUT compliance with the requirement of the above standards. This report applies to above tested sample only. This report shall not be reproduced in parts without written a…

Text truncated - open the document above for the full version.

Page 91 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China 4.5 Power Spectral Density Test Requirement: FCC Part15 E Section 15.407, RSS-247 §6.2 Test Method: KDB 789033 D02 General UNII Test Procedures New Rules v02r01 Limit: FCC: 1.≤11.00dBm/MHz for 5150MHz-5250MHz, 5250-5350MHz and 5470-5725 MHz 2.≤30.00dBm/500KHz for 5725MHz-5850MHz IC: 1.For the 5.15-5.25 GHz, The e.i.r.p. spectral density shall not exceed 10 dBm in any 1.0 MHz band. 2. For the 5.25-5.35 GHz and 5.47-5.725 GHz bands, The power spectral density shall not exceed 11 dBm in any 1.0 MHz band. Test setup: Test procedure: 1) Create an average power spectrum for the EUT operating mode being tested by following the instructions in section E)2) for measuring maximum conducted output power using a spectrum analyzer or EMI receiver: select the appropriate test method (SA-1, SA-2, SA-3, or alternatives to each) and apply it up to, but not including, the step labeled, “Compute power...”. 2) Use the peak search function on the instrument to find the peak of the spectrum. 3) Make the following adjustments to the peak value of the spectrum, if applicable: a) If Method SA-2 or SA-2 Alternative was used, add 10 log(1/x), where x is the duty cycle, to the peak of the spectrum. b) If Method SA-3 Alternative was used and the linear mode was used in step E)2)g)(viii), add 1 dB to the final result to compensate for the difference between linear averaging and power averaging. 4) The result is the PSD. Test Instruments: Refer to section 3.0 for details Test mode: Refer to section 2.2 for details Test results: Pass Page 92 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Measurement Data Band 1 (5150-5250 MHz) SISO: Condition Antenna Modulation Frequency (MHz) PSD(dBm/MHz) Duty factor(dB) Total PSD(dBm/MHz) limit(dBm) Result NVNT ANT1 802.11a 5180.00 -0.56 0.00 -0.56 11 Pass NVNT ANT1 802.11a 5200.00 -1.11 0.12 -0.99 11 Pass NVNT ANT1 802.11a 5240.00 -0.16 0.12 -0.04 11 Pass NVNT ANT1 802.11n(HT20) 5180.00 -1.77 0.13 -1.64 11 Pass NVNT ANT1 802.11n(HT20) 5200.00 -1.36 0.13 -1.23 11 Pass NVNT ANT1 802.11n(HT20) 5240.00 -1.08 0.00 -1.08 11 Pass NVNT ANT1 802.11ac(VHT20) 5180.00 -0.90 0.13 -0.77 11 Pass NVNT ANT1 802.11ac(VHT20) 5200.00 -2.10 0.13 -1.97 11 Pass NVNT ANT1 802.11ac(VHT20) 5240.00 -1.32 0.13 -1.19 11 Pass NVNT ANT1 802.11n(HT40) 5190.00 -5.99 0.26 -5.73 11 Pass NVNT ANT1 802.11n(HT40) 5230.00 -5.05 0.26 -4.79 11 Pass NVNT ANT1 802.11ac(VHT40) 5190.00 -6.37 0.26 -6.11 11 Pass NVNT ANT1 802.11ac(VHT40) 5230.00 -4.68 0.13 -4.55 11 Pass NVNT ANT1 802.11ac(VHT80) 5210.00 -9.91 0.51 -9.40 11 Pass Page 93 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Power_Spectral_Density_NVNT_ANT1_802_11a_5180 Power_Spectral_Density_NVNT_ANT1_802_11a_5200 Power_Spectral_Density_NVNT_ANT1_802_11a_5240 Page 94 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Power_Spectral_Density_NVNT_ANT1_802_11n(HT20)_5180 Power_Spectral_Density_NVNT_ANT1_802_11n(HT20)_5200 Page 95 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Power_Spectral_Density_NVNT_ANT1_802_11n(HT20)_5240 Power_Spectral_Density_NVNT_ANT1_802_11ac(VHT20)_5180 Page 96 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Power_Spectral_Density_NVNT_ANT1_802_11ac(VHT20)_5200 Power_Spectral_Density_NVNT_ANT1_802_11ac(VHT20)_5240 Page 97 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Testing Co., Ltd. Tel: 0755-23011775 | E-mail: [email protected] | http://www.psi-lab.com Add: 1-2/F., Building 5, Yudafu Industrial Park, No.10, Xingye West Road, Shajing Subdistrict, Bao'an District, Shenzhen, Guangdong, China Power_Spectral_Density_NVNT_ANT1_802_11n(HT40)_5190 Power_Spectral_Density_NVNT_ANT1_802_11n(HT40)_5230 Page 98 of 161 Report No.: psi2509211-C01-R16 Shenzhen PSI Test…

Text truncated - open the document above for the full version.