A2HDBA936Streaming Media Box

DBA936 www.RCAav.com Streaming media box Boîtier multimédia en continu Reproductor de medios de comunicación audiovisual User manual Manuel d'utilisation Manual de usuario It is important to read this instruction book prior to using your new product for the first time. Il est important de lire ce manuel d’instructions avant d’utiliser l’appareil pour la première fois. Es importante que lea este libro de instrucciones antes de usar su producto nuevo por primera vez. DBA936_IB_EN_FR_ES_0613.indd 12013/6/13 10:18:46 Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to cause an electric shock. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual. FCC RF Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. It's important to read this instruction prior to using your new product for the first time. Safety Instructions EN - 1 DBA936_IB_EN_FR_ES_0613.indd 22013/6/13 10:18:46 General Controls Reference Guide 1. DC IN power jack 2. Composite VIDEO OuT jack 3. Analog AUDIO OUT jacks 4. LAN jack 5. HDMI OuT jack 6. SD card slot 7. Power indicator 8. ON/STANDBY Button 9. USB1 / USB2 ports Remark: uSB2 port is designed for PC. Accessories • AC adapter ................................................................. x1 • Wireless mouse (with USB receiver) ............. x1 • Batteries (AAA type) ............................................. x2 Unit 1 2345 67 89 Battery Replacement When the batteries become weak, the operating of the mouse is greatly reduced and you will need to replace them. Notes: • If the mouse is not going to be used for a long time, remove the batteries to avoid corrosion damage caused by battery leakage. • Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries. • Always remove batteries as soon as they become weak. • Weak batteries can leak and severely damage the mouse. WARNING: Do not dispose of batteries in a fire. Batteries may explode or leak. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. To Install Batteries on the wireless mouse 2. Insert two AAA batteries (included). 1. Open the battery door. EN - 2 DBA936_IB_EN_FR_ES_0613.indd 32013/6/13 10:18:46 EN - 3 1 A. Using an HDMI cable (for best connection) Connect an HDMI cable (not included) to the HDMI OuT jack on your player and to the HDMI IN jack on your TV. Connecting to a TV B. Using an A/V cable Connect the yellow connectors on an A/V cable (not included) to the VIDEO jack on your player and the VIDEO IN jack on your TV. Connect the red and white connectors to the AUDIO OUT jacks on your player and L/R AUDIO IN jacks on your TV. Notes: • Do not connect a modular phone cable to the LAN jack. • When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack. Using an Analog Audio cable Connect an audio cable (not included) to the red and white AUDIO OUT jacks on your player and to the AUDIO IN jacks on your AV receiver or amplifier. 2 3 Con…

Text truncated - open the document above for the full version.

5 5 4 4 3 3 2 2 1 1 DD CC BB AA Title Size Document NumberRev Date:Sheetof Add:Unit 1005, Block east, Phase II, Tian'an High-tech Plaza,Chegongmiao, Futian District, Shenzhen, China Tel: 0086 755 82507136 Fax: 0086 755 82507106 Drawn Check EB2908-801 V0.1 A3 12Thursday, May 30, 20132 E-BODA Confidential EBODA G-BOX 7.780.952 Title Size Document NumberRev Date:Sheetof Add:Unit 1005, Block east, Phase II, Tian'an High-tech Plaza,Chegongmiao, Futian District, Shenzhen, China Tel: 0086 755 82507136 Fax: 0086 755 82507106 Drawn Check EB2908-801 V0.1 A3 12Thursday, May 30, 20132 E-BODA Confidential EBODA G-BOX 7.780.952 Title Size Document NumberRev Date:Sheetof Add:Unit 1005, Block east, Phase II, Tian'an High-tech Plaza,Chegongmiao, Futian District, Shenzhen, China Tel: 0086 755 82507136 Fax: 0086 755 82507106 Drawn Check EB2908-801 V0.1 A3 12Thursday, May 30, 20132 E-BODA Confidential EBODA G-BOX 7.780.952 RK2908 POWER UART1 RMII S/PDIF out I2C3 I2C2 I2C1 I2S0 LCDC RGB888 Debug IT6610 iNAND NAND FLASH DDR Interface SDIO0 SDIO1 UART2 I2S1 I2C0 RTC(HYM8563) 24MHz 30ppm 27MHz 30ppm OSC 24MOSC 27M RESET RC复位 IR IN SIR_IN HDMI 1.3 VIP HDMI OUT USB HOST1.1 USB HOST2.0 USB OTG2.0 RK2908 SPI0 HSADC SPI1 4*DDR3 (256M*8Bit) 32.768KHz R/L OUT R L Y/CVBS RK1000-S CVBS OUT Op Amp RJ-45 LAN8720A Ethernet PHY SYSTEM POWER 5V/2A DCDC BUCK NAND FLASH and iNAND select one >=1GB HOST20 OTG 2.0 WIFI MODULE MAX:32GB UnRegistered Realtek confidential files The document authorized to RF-LINK 2010-11-02 15:40:52 RTL8188CUS Datasheet Single-Chip IEEE 802.11b/g/n 1T1R WLAN Controller with USB2.0 Interface (QFN-46) 4 Track ID: JATR-2265-11 Rev. 1.0 3. Application Diagram 3.1. Single-Band 11n (1x1) Solution (11n 1x1 MAC/BB/RF+PA) Antenna 2.4GHz PA Tx/ Rx Matching Circuit 2.4 GHz Transceiver TX I/Q NV Memory ADC DAC SPS / LDO Regulators 40MHz Crystal MAC Configuration Control and Memory Ext Interface Baseband (PHY) USB 2.0 Host Interface 3.3V RX I/Q LED WPS Push Button Figure 1. Single-Band 11n (1x1) Solution (11n 1x1 MAC/BB/RF+PA)

INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model : SAB1936 / DBA936 (External) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model : SAB1936 / DBA936 (External) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model : SAB1936 / DBA936 (External) Equipment Photographs INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Model : SAB1936 / DBA936 (External)

DBA936 - PRODUCT GRAPHIC 08-07-2013 0.3MM PROTRUDE SYMBOL BOTTOM CABINET: MOLDED IN PMS BLACK NO SPRAY 0.3MM PROTRUDE ENGRAVE TOP CABINET: MOLDED IN TRANS. DARK GREY LENS NO SPRAY S.S PRINTED IN PMS 877C SERIAL NO. LABEL P/N: 809-000009W210 DBA936 - PRODUCT GRAPHIC 12-07-2013 Model / Modèle: DBA936 DC IN 5V 2A Power Consumption/Consommation de courant: 5W AVC Multimedia Markham Ontario L3R 1E3 www.RCAav.com CAN ICES-3(B)/NMB-3(B) Made in China / Fabriqué en Chine FCC ID: AHDBA IC: 9903A-DBA936 2936 MANUFACTURED, FABRIQUE: JUNE 2013 JUNE 2013 S/N: XXXXXXXXXXX0000001 Model / Modèle: DBA936 DC IN 5V 2A Power Consumption/Consommation de courant: 5W AVC Multimedia Markham Ontario L3R 1E3 www.RCAav.com CAN ICES-3(B)/NMB-3(B) Made in China / Fabriqué en Chine FCC ID: AHDBA IC: 9903A-DBA936 2936 MANUFACTURED, FABRIQUE: JUNE 2013 JUNE 2013 S/N: XXXXXXXXXXX0000001 SERIAL NO. LABEL SPEC. LABEL SPEC. LABEL (RCA) P/N: 809-D93696W011 Model / Modèle: SAB1936 DC IN 5V 2A Power Consumption/Consommation de courant: 5W CAN ICES-3(B)/NMB-3(B) Made in China / Fabriqué en Chine FCC ID: AHDBA IC: 9903A-DBA936 2936 MANUFACTURED, FABRIQUE: JUNE 2013 JUNE 2013 S/N: XXXXXXXXXXX0000001

INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal) INTERTEK TESTING SERVICE Report No.: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Equipment Photographs Model: SAB1936 / DBA936 (Internal)

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Report No.: 13051823HKG-001 i FCC ID: A2HDBA936 IC: 9903A-DBA936 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION ALCO Electronics Ltd. BRAND NAME: VENTURER, MODEL: SAB1936 BRAND NAME: RCA, MODEL: DBA936 FCC ID: A2HDBA936 IC: 9903A-DBA936 Grantee: ALCO Electronics Ltd. Grantee Address: 11/F., Zung Fu Industrial Building, 1067 King’s Road, Quarry Bay, Hong Kong. Contact Person: Peggy Suen Tel: 852-2562 6121 Fax: 852-2597 5201 e-mail: [email protected] Manufacturer: Dongguan Houjie Alco Electronics General Factory Manufacturer Address: The 3 rd Industrial District, Houjie, Dongguan, Guangdong, P.R.C. Brand Name: VENTURER / RCA Model: DBA936 Additional Model: SAB1936 Type of EUT: Transceiver Description of EUT: Steaming Media Box Serial Number: N/A FCC ID / IC: A2HDBA936 / 9903A-DBA936 Date of Sample Submitted: May 31, 2013 Date of Test: Jun 26, 2013 to Aug 16, 2013 Report No.: 13051823HKG-001 Report Date: Aug 16, 2013 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Report No.: 13051823HKG-001 ii FCC ID: A2HDBA936 IC: 9903A-DBA936 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT ALCO Electronics Ltd. BRAND NAME: VENTURER, MODEL: SAB1936 BRAND NAME: RCA, MODEL: DBA936 FCC ID: A2HDBA936 IC: 9903A-DBA936 TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.4 Pass Transmitter Field Strength and Bandwidth Requirement 15.249 / RSS-210 A2.9 Pass Digital Device Radiated Emissions 15.109 / RSS-210 2.5 Pass Digital Device Conducted Emissions 15.107 / ICES-003 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2011 Edition RSS-210 Issue 8, December 2010 RSS-Gen Issue 3, December 2010 Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Report No.: 13051823HKG-001 iii FCC ID: A2HDBA936 IC: 9903A-DBA936 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 2 2.4 Equipment Modification................................................................................. 3 2.5 Measurement Uncertainty ............................................................................. 3 2.6 Support Equipment List and Description........................................................ 3 3.0 Emission Results ........................................................................................... 4 3.1 Field Strength Calculation ............................................................................. 4 3.2 Radiated Emission Configuration Photograph ............................................... 5 3.3 Radiated Emission Data ............................................................................... 5 3.4 Conducted Emission Configuration Photograph ............................................ 5 3.5 Conducted Emission Data...........................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 1 Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: SAB1936 / DBA936 INTERTEK TESTING SERVICE Report No: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 2 Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) Model: SAB1936 / DBA936 INTERTEK TESTING SERVICE Report No: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 3 Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: SAB1936 / DBA936

INTERTEK TESTING SERVICE Report No: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: SAB1936 / DBA936 Radiated Emission SAB1936 / DBA936 13051823HKG-001 Side A INTERTEK TESTING SERVICE Report No: 13051823HKG-001 FCC ID: A2HDBA936 IC: 9903A-DBA936 Configuration Photographs Worst-Case Radiated Emissions (Rear View) Model: SAB1936 / DBA936 Radiated Emission SAB1936 / DBA936 13051823HKG-001 Side B