A2HONB14AV204Clock Radio

PRODUCT GUIDE Model: ONB14AV204 Clock Radio with Bluetooth ® Technology SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s guide. * SEE GRAPHIC SYMBOLS ON THE BOTTOM OF UNIT * Rating plate was located at bottom of enclosure of the apparatus. FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warnings: • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • The AC/DC adapter is used as disconnect device. The AC/DC adapter of apparatus should not be obstructed OR should be easily accessed during intended used. To be completely disconnect the power input , the AC/DC adapter of apparatus should be disconnected from the mains. • Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation. • Battery- shall not be exposed to excessive heat such as sunshine, fire or the like. • The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table- cloths, curtains etc. • No naked flame sources such as lighted candles should be placed on the apparatus. • The AC/DC adapter and apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on AC/DC adapter and apparatus. On Use Never use the unit where it would be subject to: - Heat sources such as radiators or air ducts. - Direct sunlight. - Excessive dust. - Moisture or rain. - Mechanical vibration or shock. - Uneven surface. This symbol indicates that this product incorporates double insulation between the hazardous mains voltage and user accessible parts. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightening storms or when unused for a long period of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Portable Cart Warning LOCATION OF CONTROLS Top View 1. HOUR/TUNING Button 2. 1 (Alarm 1) Button 3. (Clock) /FUNCTION Button (FM/AM/Bluetooth ® mode) 4. (Standby/On) Button 5. - VOLUME + Button 2 3 4 8 5 9 67 1 10 6. PRESET/SNOOZE Button 7. (Play/Pause)/MEMORY/PAIR Button 8. (Sleep) Button 9. 2 (Alarm 2) Button 10. MIN/TUNING Button Front & Rear View 11 12 13 141516171819 20 11. PM Indicator 12. BUZZ (Alarm 1/beep alarm indicator) 13. RADIO alarm for alarm 1 Indicator) 14. ALM1 (Alarm 1 indicator) 15. Display(Hour Digits:Minute Digits) 16. ALM2 (Alarm 2 indicator) 17. RADIO alarm for alarm 2 Indicator 18. BUZZ (Alarm 2/beep alarm indicator) 19. BT (Bluetooth ® pairing for Indicator) 20. Speakers 21. USB Charger only (Max.5V 2.1A) 22. AC Power adaptor 22 21 • Do not place any heavy obj…

Text truncated - open the document above for the full version.

 BLOCK DIAGRAM 1 A

 COMPANY:    CHECKED:   DRAWN: SIZE: REV: 2 1
     ALCO Electronics Limited LCD DISPLAY MCU HC180230A U1 32.768KHZ OSC X601 BATTERY_IN 3V BT+3.0V GND IC301 BK1088E AM/FM RECEIVER L R NS4890 NS4890 L_SPK R_SPK IC302 IC303 LR I2C SCK SDA BUZZER_IN POWER SUPPLY DC+5.0 ADAPTOR POWER SUPPLY MCU_3.3V IC304 MCU+3.3V TUNER_3.3V AMP_+5V PWR_CT SIGNAL CHANNEL CONTROL DC CR82060 CLOCK RADIO BLOCK DIAGRAM USB CHARGE BLUETOOTH L R BT2 FCC ID: A2HONB14AV204 5V 2.1A 5VDC Output DC Power Supply AC / DC FM RadioAntenna AM RadioAntenna IC1 ME6206A33 3.3V Regulator +5V DC BluetoothAntenna2402MHz to 2480MHz MS4890 MS4890 BluetoothModuleBT101(CMD2022B) X1 32.768kHz 3V Battery X30232.768kHz Y226MHz 32.768kHz 5V DC LED Display LED1 - LED36 Keypad SW1-SW11

Date: 16 May, 2014

INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (External) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (External) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (External)

1,5 V UM-3 / AA OU MODÈLE ÉQUIVALENT MODEL NO. & SAFETY INFORMATION OF ENGRAVE AREA: 0.3 MM PROTRUDED WORDING & SYMBOL (DETAILS INFORMATION PROVIDE BY ARTWORK TEAM ) COSMETIC -- FRONT, BACK AND ALL LABELS VIEW MODEL NO.: CR82060BE1 BRANDNAME /BU Y ER # VENTURER / CR82060BE1 1/1 PAGE VERSION 1.0 Eric So PREPARED BY 22. 07.2014 PRODUCT DECORATION SPECIFICATION FLIP DOOR(FIXED):BLUETOOTH BRANDNAME LOGO SIZE ABOUT:32X8MM (WXH)SILKSCREEN IN PMS WHITE TOP CABINET/ALL CONTROL BUTTONS:MOLD IN PMS BLACK0.3MM PROTRUDED/RECESSED SYMBOLS“PAIR” WORDS IN SILKSCREEN IN PMS WHITE BOTTOM CABINETMOLD IN PMS BLACK0.3MM PROTRUDED SYMBOLS DISPLAY LENS:MOLD IN TRANSPARENTBACKGROUND REAR ENGRAVING0.3MM PROTRUDED SYMBOLS SPEC LABELS:63X23.5MM(WxH)WHITE PRINT BLACK B/G+PP,W/STR.ADH.1/UNIT ,STICK ON BOTTOM SERIAL NO. LABEL DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.NE PAS EXPOSER CET APPAREIL À DE LA PLUIE OU DE L’HUMIDITÉ. SPEC LABEL ARTWORK FOR BULIT-IN ADAPTOR VENDORS:23X26MM(WxH)1/ADAPTOR ,STICK ON ADAPTOR SERIAL NO LABEL 9-14 (COMPUTER LABEL) 809-000009W140S:28x7mm,WHT LABEL w/EAN 128 BAR CODE1/UNIT ,STICK ON BOTTOM1/GB ,STICK ON BOTTOM ONB14AV204 Bluetooth ® Clock Radio Input: 120V 60Hz Power Consumption: 11W FCC ID: A2H ONB14AV204 USB Terminal: 5V 2.1ABackup Battery: 1.5V UM3 or AA size x 2Venturer Electronics, Inc. Markham, Ontario L3R 1B8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Made in China CR82060BE1 Bluetooth ® Clock Radio Input: 120V 60Hz Power Consumption: 19W FCC ID: A2H ONB14AV204 USB Terminal: 5V 2.1ABackup Battery: 1.5V UM3 or AA size x 2Venturer Electronics, Inc. Markham, Ontario L3R 1B8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Made in China CR82060BE1 Clock Radio Input: 120V 60Hz Power Consumption: 19W FCC ID: A2H ONB14AV204 USB Terminal: 5V 2.1ABackup Battery: 1.5V UM3 or AA size x 2Venturer Electronics, Inc. Markham, Ontario L3R 1B8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Made in China Letter size 1.5mm Letter size 1.5mm

INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal) INTERTEK TESTING SERVICE Report No.: 14070655HKG-001 FCC ID: A2HONB14AV204 Equipment Photographs Model: CR82060BE1 (Internal)

Technical Description The Equipment Under Test (EUT) is a Clock Radio. The EUT has Bluetooth Audio portion which is operating between 2402MHz and 2480MHz (79 channels with 1MHz channel spacing). When the EUT is switched ON in Bluetooth mode, the display will show “BT” and a LED flashing. The Bluetooth enabled device would be searched and connected the EUT before playing audio. After pairing, the “BT” LED will stay lit. The audio signal will be amplified and fed to internal stereo loudspeaker. The EUT also have AM/FM radio and alarm clock function. A LED display acts as the visual interface. The EUT is powered by 5V DC from an AC/DC adaptor. The AC/DC adaptor can accept 100-240VAC. Two optional size AA batteries (3VDC) are for real-time-clock memory back-up. A USB port (5VDC) is for charging purpose only. 2.4GHz Bluetooth Module: Modulation Type: GFSK Antenna Type: Integral, Internal Frequency Range: 2402MHz - 2480MHz, 1MHz channel spacing, 79 channels Nominal field strength is 98.4dB μV/m @ 3m Production Tolerance of field strength is +/- 3dB Antenna gain is 0dBi The functions of main ICs are mentioned below. 1. BlueTooth module CMD2022B (BT101): 1) IC3 (CW6638M) acts as the 2.4GHz radio core of Bluetooth module 2) IC2 (AX2225) is MCU integrating with audio DSP and CODEC. 3) IC4 (24C08) is 8k serial EEPROM for parameter storage. 4) Y2 (26MHz) crystal provides system clock for IC3. 5) X302 (32.768kHz) crystal provides system clock for IC2. 2. AM/FM Radio Portion: 1) IC301 (BK1088E) acts as digital AM/FM radio demodulator. 2) L301 acts as AM antenna. 3. MCU module: 1) IC1 (HC180230A) acts as MCU core for the product. 2) X1 (32.768kHz) acts as clock for the MCU core (IC1). 3) LED1-LED36 are the LED display. SW1-SW11 are Keypad. 4. Audio portion: 1) IC302, IC303 (MS4890) are 1W power amplifiers driving loudspeaker. 5. Power Supply portion: 1) IC304 (ME6206A33) is 3.3V voltage regulator. Channel Frequency Table of Bluetooth Module CMD2022B CW6638M Rev 1.0 Mar 2013 Bluetooth Module Table of Contents Chapter 1 Description.............................................................................................................. 1 Chapter 2 CMD2022B CW6638+AX2225A Features.............................................................. 1 Chapter 3 Deminsion................................................................................................................ 2 Chapter 4 Pin Assignment ..................................................................................................... 3 4.1 CMD2022B CW6638+AX2225A Pin Assignment ................................................................ 4 Chapter 5 Application.............................................................................................................. 4 Chapter 6 Application Schematic.......................................................................................... 5 6.1 CMD2022B CW6638+AX2225A Application Schematic ..................................................... 5 Rev 1.0 CMD2022B -CW6638%OXHWRRWK0RGXOH 'HVFULSWLRQ CMD2022B-CW6638+AX2225A1 0RGXOH'HVFULSWLRQ &:$;$LVUREXVW%OXHWRRWK$XGLR0RGXOHZKLFKKDVULFKIXQFWLRQVWDUJHWHG WRVPDOOVL]HSRUWDEOH$XGLR%RRPER[PDUNHW,QFRUSRUDWHGZLWK$SSRWHFKMP3GHFRGH IC CW6638+AX222ALVDKLJKO\FRPSHWLWLYHVROXWLRQCW6638MLV%OXHWRRWK2.1+EDR DQGDOVR%OXHWRRWK3.0FRPSDWLEOH  CMD2022B CW6638+AX222A0RGXOH3KRWRJUDSK CMD2022BCW66380RGXOH CMD2022 B-CW6638+AX2225A Module Characteristics xSupportU6%SD/TFFDUG xAux in with Volume Control˗˄WKUHH$8X_IN&KDQQHOV˅ x Support external FMUDGLRFKLS xSupport IR remote function˗ xSupport buzz tone˗ xSupportUSBFDUGUHDGHUIXQFWLRQˈDFFHVVSDTFDXGLRILOHV˗ xSupport power ON/OFF function˗ Rev 1.0 CMD2022B W6638%OXHWRWK0RGXOH 'HVFULSWLRQ CMD2022B-CW6638+AX2225A2 xSupport$8',2(Q8$/,=$7,21˗ xSupportUSB Host˗ xSupportL2CAP/A2DP(AVCTP/AVDTP/AVRCP) $XGLRILOHV xSupportMCUUART; 0RGXOH'HPLQVLRQ 0RGXOH'HPDLQVLRQ CMD2022B CW6638 /×:×+=27.6mm × 15.6mm × 2mm Rev 1.0 CMD2022B -CW6638%OXHWRRWK0RGXOH 'HVFULSWLRQ CMD2022B-CW6638+AX2225A3 3LQ$VVLJQPHQW CMD2022B- CW66383LQ$VVLJQPHQW 3LQ1DPH)XQFWLRQ'HVFULSWLRQ 1RF_ANTRF_ANT([WHUQDO$QWHQQD3RUW1&LILQWHUQDO3&%DQWHQQDLVXVHG; 23.3VPOWER3.3VRXWSXW 3PLAY/PAUSEDigital Input 3/$<3$86( 4BT_LEDDigital Input 3RZHU2Q,QGLFDWRU $FWLYH+LJK 5TEST1Digital I/O NC 6TEST2Digital I/O NC 7IIC_SDADigital I/O IICBSDA 8IIC_SCLDigital I/O IICBSCL 9NEXTDigital I/O 1H[W7UDFN 10PREVDigital I/O 3UHYLRXV7UDFN Rev 1.0 CMD2022B W6638 CMD2022B-CW6638+AX2225A4 11RTCPOWER5HDO7LPH&ORFN;(POWER) 1232KINDigital Input 32.768kHFORFN˗ 1332KOUTDigital out 32.768kHzFORFNRXWSXW 14GNDPOWER3RZHU*URXQG; 15USBDPDigital I/O USB'3 16USBDMDigital I/O USB'0 17BT_VDDPOWER0RGXOH3RZHU,QSXW 18SD_DATDigital I/O SD/TFGDWD; 19SD_CLKDigital I/O SD/TF&ORFN; 20SD_CMDDigital I/O SD/TF&0'; 21NCDigital I/O NC 22DACRDigital OUT '$&$XGLRRXW5; 23DACLDigital OUT '$&$XGLRRXW/; 24AGNDPOWER$QDORJ*URXQG; 25AUXR/P37Digital Input AUXR_input;RUM&8UART SURJUDPPDEOH ; 26AUXL/P36Digital Input $8;/BLQSXWRU0&88$57 SURJUDPPDEOH  27AUXR/P03Digital Input $8;5BLQSXWRU,2 SURJUDPPDEOH  28AUXL/P02Digital Input $8;/BLQSXWRU,2 SURJUDPPDEOH  29AUXR/P01Digital Input $8;5BLQSXWRU,2 SURJUDPPDEOH ; 30AUXL/P00Digital Input $8;/BLQSXWRU,2 SURJUDPPDEOH  31MUTE/P35Digital OUT MUTERU,2 SURJUDPPDEOH 32TESR3Digital I/O WHVWSRUW 1RWH0RGXOHIO is for 3.3V systemˈ'RQ WH[FHHG3.3V in application to avoid damage. $SSOLFDWLRQ z Portable luetooth Audio zBluetooth MP3 Boombox zBluetooth Speaker zBluetooth Home Audio zHi-Fi Bluetooth Stereo Rev 1.0 CMD2022B -CW6638%OXHWRRWK0RGXOH 'HVFULSWLRQ CMD2022B-CW6638+AX2225A5 z Bluetooth Car Audio CMD2022B CW6638Application Schematic MCU Schematic: .H\3DGDQG/('6FKHPDWLF: ˄а˅˖CMD2022B CW6638$SSOLFDWLRQ6FKHPDWLF Test Port CW 6638M Doc.NO:DS6638M Ver. 1.0 June/28/2012 Bluetooth 3.0 Single Chip for A2DP/AVRCP Solution CONWISE Technology Limited Te…

Text truncated - open the document above for the full version.

Analysis Report Report No.: 14070655HKG-001 The Equipment Under Test (EUT) is a Clock Radio. The EUT has Bluetooth Audio portion which is operating between 2402MHz and 2480MHz (79 channels with 1MHz channel spacing). When the EUT is switched ON in Bluetooth mode, the display will show “BT” and a LED flashing. The Bluetooth enabled device would be searched and connected the EUT before playing audio. After pairing, the “BT” LED will stay lit. The audio signal will be amplified and fed to internal stereo loudspeaker. The EUT also have AM/FM radio and alarm clock function. A LED display acts as the visual interface. The EUT is powered by 5V DC from an AC/DC adaptor. The AC/DC adaptor can accept 100-240VAC. Two optional size AA batteries (3VDC) are for real-time-clock memory back-up. A USB port (5VDC) is for charging purpose only. Antenna Type: Internal, Integral Antenna Gain: 0dBi Nominal rated field strength: 98.4dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB According to the KDB 447498: Based on the Maximum allowed field strength of production tolerance was 101.4dBμV/m at 3m in frequency 2.4GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 4.14mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 4.14mW. The conducted source-based time-averaged output power = (4.14 *5/6 ) mW = 3.45 mW The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.53 mW Since the above conducted source-based time-averaged output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: A2HONB14AV204

ALCO Electronics Limited





1 2 REV: SIZE: DRAWN: 
 
 CHECKED:
 
 COMPANY:    A 1 SPEAKER_R SPEAKER_L   
    呥琸焔PWR_CTး0 匲琸焔PWR_CTး1 ADD MUTE CIRCUIT SNOOZE SKIP-SKIP+ PLAY SLEEP ON/OFF VOL+ VOL- POWER_SUPPLY UPDATE ALARM1 ALARM2 FUN 1 SHUTDOWN 2 BYPASS 3 +IN 4 -IN 5 VO1 6 VDD 7 GND 8 VO2 IC302 IC-MS4890-MSOP8 1 SHUTDOWN 2 BYPASS 3 +IN 4 -IN 5 VO1 6 VDD 7 GND 8 VO2 IC303 IC-MS4890-MSOP8 C324 1uF C323 1uF R322 100R C326 1uF C325 1uF + CE302 220UF/10V C335 104P FM_ANT1 FM_ANT C304 102P D302 NC D301 NC L301 AM/ANT420UH L302 NC X301 NC C302 NC C314 1uF C3131uF R306 0R R307 0R R304 1K R305 1K R317 2.2K R316 2.2K R314 30K R315 30K C319 100P C317 100P R319 0R R318 0R R320 NC R321 NC C328 102P C327 102P C318 104P 1 GND 2 GND1 3 FMI 4 RFGND 5 AMI 6 GND2 7 SCLK 8 SDIO 9 RCLK 10 VDD 11 ROUT 12 LOUT 13 VA 14 GP103 15 GP102 16 EXTLNA 17 RIN2 18 LIN2 19 RIN1 20 LIN1 IC301 IC-BK1088E-SSOP20 R324 0R C305 NC + CE301 100uF10V C301 104P C312 104P C3091uFC3081uFC3071uFC3061uF R301 100K R311 47K R310 47K R313 5K6 R312 5K6 C311 102P C310 102P R308 100K R302 NC R303 NC C320 104P C321 104P R309 1R/1/2W 123456 JK302 USB JACK R339 43.2K1% R338 75K1% R340 49.9K1% R341 49.9K1% C336 104p 1 3 2 Q303 3904 1 3 2 Q304 3904 1 3 2 Q305 3904 R332 100K R333 33K C329 10uF R331 24K 123456789 10111213141516 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33343536373839404142434445464748 49 50 51 52 53 54 55 56 57 58 59 60 61 62 IC1IC_ASCI_62P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CN1 12345678910111213141516 17181920 CN2 X1 32.768KHz C1C2 R1 0R C3 R4 1k R5 1k 1 3 2 Q1 R2 1k R3 680R R8 680R LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 LED9 LED10 LED11 LED12 LED13 LED14 LED15 LED16 LED17 LED18 LED19 LED20 LED21 LED22 LED23 LED24 LED25 LED26 LED27 LED28 LED29 LED30 LED31 LED32 LED33 LED34 LED35 LED36 SW8 SW4 SW6 SW2 SW7 SW1SW3SW5 R334 47K R336 33K R326 1K R327 1K C303 33P R337 1K R325 270R D304 1N4148 D303 1N4148 D308 1N4148 EC B Q308 8550 C315C316 C3381uF C337 1uF JK301 D305 SS34 + CE303 1000UF/16V C333 104 C332 104 1 VSS 2 OUT 3 IN IC304 ME6206A33 + CE304 100uF10V C334 104P C507 4.7U D309 1N4148 D307 1N4148 D306 1N4148 1234 CN302 CON4P 1 ANT/RF 2 3V3 3 PLAY/PASE 4 BT_LED 5 TEST1 6 TEST2 7 I2C_SDA 8 I2C_SCL 9 NEXT 11 RTC 10 PREV 12 32K_IN 13 32K_OUT 14 GND 15 USB_DP 16 USB_DM 17 BT_VDD 18 SD_DAT 19 SD_CLK 20 SD_CMD 21 NC 22 DAC_L 23 DAC_R 24 AGND 25 AUXL0 26 AUXR0 27 AUXL1 28 AUXR1 29 AUXL2 30 AUXR2 31 MUTE 32 TESR3 BT101 BT-CMD2022-32PIN X302 32.768KHz C331 15P C33015P SW9 SW10 SW11 C4 105 1 3 2 Q306 3904 R344 1K R345 47K R342 2K2 R343 100K JR26 180K + CE1 100uF10V L11 3534 L1 3534 TUNER_L TUNER_R I2C_SCL I2C_SDA RFGND TUNER_3V3 TUNER_L TUNER_R VCC+5V4 USB+5V/500MA VCC+5V4 AMP_CT BT_LBT_R BUS1 GND TU_CT BUZZER AMP_CT AC_CET VOL- BT_LED SEG1 VOL+ POWER_ON SLEEP PLAY SKIP+ SKIP- SNOOZE BT_CT SEG2 SEG3 SEG4 SEG5 SEG6SEG7SEG8SEG9SEG10SEG11SEG12SEG13SEG14SEG15SEG16SEG17SEG18SEG19SEG20SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 BLK_CT GND SCL SDA MCU_3V3 BT_LED BT_CT MCU_3V3 32.768KHZ 32.768KHZ GND BUZZER TU_CT AMP_CT AC_CET VOL- VOL+ POWER_ON SLEEP PLAY SKIP+ SKIP- SNOOZE GND MCU_3V3GND SDA SCL BLK_CT GNDLED_+ LED_+ SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 AMP_CTTU_CT BUZZER I2C_SCL I2C_SDA 32.768 32.768MCU_3V3BT_ONBT_LED BT_PREVBT_NEXTBT_PLAY BT_PLAY BT_PREV BT_NEXT VDD_4V2 BT_LED BT_L BT_R VCC+5V4 VDD_4V2 MCU_3V3 BATTER_3V USB_DPUSB_DMUSB_5V BT_LED BT_VCC_CT AMP_CT BUZZER FM_ANT FM_ANT HC180230A CMD2022B Bluetooth2402MHz to 2480MHz Y2 26MHz IC1 FILE NAME : CMD2022BSHEET NAME :DRAWN BY : VERSION : V01 DATE : DATE : DATE : 105 475 475 475 475 1P IC2 IC424C08 475 L2 NC 0R NC 1.2NH IC5 SD_CMD(MODE)SD_CLK/(NEXT) SD_DAT(PREV) SPI_CLK/P05(VL+) SPI_DAT/P04(VOL-) SPI_CS/P23(P/P) RTC OSCO OSCI MD_RF IRDA/VPP/P07 2225-RX 2225-TX RTC SD_DAT(PREV) SD_CLK/(NEXT) SD_CMD(MODE) SPI_CS/P23(P/P) P33 AGND P13 SPI_DAT/P04(VOL-) SPI_CLK/P05(VL+) OSCO OSCI P13 P33 Bluetooth2402MHz to2480MHz CW6638M AX2225 IC2 IC3 02'(/=/$:  8.⩥⅄࣏⤶మ/SCHEMATIC  N L 1.6AFUSE INPUT: AC100-240V C310.1uF275VAC R17NC D1 D2 D3 D4 1N4007 X4 C9400V10uF L12.5mH C1400V10uF C13104 R2A, R2B200K X 2 D5FR107 T1YB-130 Q1JCS5N605A 600V D7MUR540 D8 MUR540 R7100R D6FR107 C5 10V1000uF C 4 10V 1000uF L34.7uH ZD1NC L2400uH OUT +5V OUT 0V C10104 CY1222 250VAC U1PC817 R11270R R151M U3CJ431 R134K7 C8104 C14 102 R84K7 R104K7 R675R D9 IN4148 R3100K C7 104 C310uF50V R1A2R2 R1B2R2 R4680R J10R R510K U2OB2263NMP 1 2 3 45 6 Power Supply Schematic

lntertek Valued Quality. Delivered. lssuing Laboratory: lntertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKI-AS 005 - TEST) under HOKLqS for specific laboratory act¡vities as l¡sted ¡n the HOKLAS d¡rectory of accred¡ted laboratories. Report No.: 14070655HKG-001 TEST REPORT Alco Electronics Ltd. Application For Certification (Original Grant) (FCC lD: A2HONB1 4AV204l Transceiver Prepared and Checked by: Wong Clréuk H Lead Engineer Th¡s report shall not be reproduced, sxc€pt in full Th¡s report is for lhe exclus¡ve use ol lntertek's Client and is provided pursuant to the agr€emsnt botwoen lnt€rtek ånd its Cl¡ent. lntortek's rssponsib¡lity and liability are l¡m¡ted to the lerms and ænd¡t¡ons of the agrsoment. lntertek assumes no liability to any perty, othsr than to the Cli€nt in accotdanc€ with the agroement, for any loss, expens€ or damag€ occåsioned by the use of this rsport, Only thg Client ¡s åuthorized to perm¡t copying or distr¡but¡on ot this r€port and then only in ¡ts entirety. Any uss of thê lntert€k name or one of its mark6 for thê sale or advertissmsnt of thê test€d mat€rial, product or sêrv¡co must f¡rst b€ approved in wr¡t¡ng by lntortek The obs€rvalions and test results in th¡s reporl Bre rêlêvant only to the sample tested This r€port by ¡tself doo8 not imply that th€ mater¡al, product, or ssrvice is or has €vsr b€en under sn lntertok cerlificat¡on program Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Webs¡te: www.hk.intertek-etlsemko.com Approved by: Supervisor Date: July 21,2014 Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14070655HKG-001 i FCC ID: A2HONB14AV204 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Grantee: Alco Electronics Ltd. Grantee Address: 11/F., Zung Fu Industrial Building, 1067 King’s Road, Quarry Bay, Hong Kong. Contact Person: Peggy Suen Tel: (852) 2562 6121 Fax: (852) 2597 5201 e-mail: [email protected] Manufacturer: Alco Electronics (Dongguan) Limited Manufacturer Address: Gong Ye Xi Road, Houjie Technology Industrial Park, Houjie, Dongguan, Guangdong P.R.C. 523960 China Brand Name: VENTURER / ONN Model: CR82060BE1 / ONB14AV204 Type of EUT: Transceiver Description of EUT: Clock Radio Serial Number: N/A FCC ID: A2HONB14AV204 Date of Sample Submitted: July 15, 2014 Date of Test: July 15, 2014 to July 19, 2014 Report No.: 14070655HKG-001 Report Date: July 21, 2014 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14070655HKG-001 ii FCC ID: A2HONB14AV204 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 Pass Radiated Emission Radiated Emission on the Bandedge 15.249 Pass Radiated Emission in Restricted Bands 15.205 Pass Digital Device Radiated Emissions 15.109 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2012 Edition Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report No.: 14070655HKG-001 iii FCC ID: A2HONB14AV204 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 2 2.0 System Test Configuration ............................................................................ 3 2.1 Justification................................................................................................... 3 2.2 EUT Exercising Software .............................................................................. 4 2.3 Special Accessories...................................................................................... 4 2.4 Measurement Uncertainty ............................................................................. 5 2.5 Support Equipment List and Description.................................................…

Text truncated - open the document above for the full version.

INTE…

Text truncated - open the document above for the full version.