A2HPA5075U-1SPAMini 3D Soundbar with Subwoofer

Mini 3D Sound Bar and Subwoofer User’s Guide If you need assistance Toshiba’s Support Web site support.toshiba.com Call Toshiba Customer Support Center Within the United States at (800) 631-3811 Outside the United States at (949) 583-3050 For more information see Troubleshooting on page 19 in this guide GMAA00400010 07/12 2 Table of contents Introduction ....................................................................................... 8 Safety icons ........................................................................................ 8 Box contents ....................................................................................... 8 Mini 3D Sound Bar speaker system controls ..................................... 9 Remote control .................................................................................. 11 Mini 3D Sound Bar speaker system placement .................................. 11 Mini 3D Sound Bar speaker system connections ............................... 11 3D Sound ........................................................................................... 16 Audio playback mode ......................................................................... 17 Playback via Bluetooth ® -enabled devices ........................................... 18 Troubleshooting ................................................................................. 19 Maintenance ....................................................................................... 19 Specifi cations ..................................................................................... 20 3 The lightning fl ash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this User’s Guide. Remark: The marking plate is located on the bottom enclosure. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER OUTLET, THEN FULLY INSERT. The symbol for Class II (Double lnsulation) To ensure proper use of this product, please read this User’s Guide carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specifi ed herein may result in hazardous radiation exposure. • The mains plug is used as disconnect device and it should remain readily operable during intended used. In order to disconnect the apparatus from the mains completely, the main plug should be disconnected from the mains socket outlet completely. • Minimum 10 cm (4 inches) distances around the apparatus for suffi cient ventilations. • Never use the apparatus in environments that exceed the recommended operating temperatures of 41 F to 95 F (5 C - 35 C). Safety precautions 4 14. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fi re or electric shock. 15. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item fi lled with liquid, or candles on top of the unit. 16. Do not place anything on top of this unit. 17. Do not place the apparatus on amplifi ers or equipment that may produce heat. 18. Never block or cover the slots or openings in the unit. Never place the main console: • on a bed, sofa, rug or similar surface. Never place the main console or the subwoofer: • too close to drapes, curtains, or walls; or • in a confi ned space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation. 19. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fi re. 20. During lighting, do not touch the connecting cables or the apparatus. 21. Warning: To prevent the spread of fi re, keep candles or other open fl ames away from this product at all times. Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifi ers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specifi ed by the manufacturer. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects hav…

Text truncated - open the document above for the full version.

ALCO CONFIDENTIAL

WLINK TECHNOLOGY LTD. Product Specification __________________________________________________________________________________ Page 2 of 10 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 and cost and performance-optimized stereo headsets. The BT3GMD-A30P supports Bluetooth SIG-compliant wideband speech implementation to greatly enhance the audio quality with both PCs and cell phones. The BT3GMD-A30P supports the Bluetooth 3.0 standard, adding enhanced power control, simple and secure pairing, and enhanced inquiry response as value-added features for Bluetooth headsets. All major functional blocks required for a Bluetooth stereo headset, including switcher, charger, and stereo audio codec are The module includes EEPROM, crystal, and PCB antenna. Applications: ● High-End Stereo Wireless Headsets ● High-END Mono Headsets ● Hands-Free Car Kits ● Wireless Speakers Functional Block Diagram: Figure 1: BT3GMD-A30P Block Diagram

INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model : PA5075U-1SPA (External) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model : PA5075U-1SPA (External) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model : PA5075U-1SPA (External)

INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model : PA5075U-1SPA (Label Location) PA5075U-1SPA (TAIS/US version) /SB93133S20 SOUND BAR Mini 3D Sound Bar Spec label Size : W102 x H80mm , R=2mm.Last updated : 08 Aug,2012 Actual size **100%** FOR APPLICATION ONLYDate: 08 Aug,2012 MINI 3D SOUND BAR WITH SUBWOOFER MODEL: PA5075U-1SPAPOWER SOURCE: DC19V 3.42APOWER CONSUMPTION: 40WIMPEDANCE: 4WARNING: SHOCK HAZARD - DO NOT OPENDO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.MADE IN CHINA FCC ID: A2HPA5075U-1SPAIC: 9903A-PA5075U1SPA 1. Letter size 2mm Brand name5mm Letter size3mm Letter size2.5mm

INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal) INTERTEK TESTING SERVICE Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Equipment Photographs Model: PA5075U-1SPA (Internal)

Technical Description The Equipment Under Test (EUT) is Micro 3D Soundbar with Subwoofer. It can accept both analog input sources (RCA aux-in and 3.5mm phone-jack line-in), digital input sources (optical and coaxial) and wireless Bluetooth device. The Bluetooth module in the EUT operating in the frequency range from 2402MHz to 2480MHz (79 channels with 1MHz channel spacing). The audio signal is amplified and fed to the built-in stereo loudspeakers. The separate passive Subwoofer unit is driven by the internal subwoofer power amplifier. The EUT is powered by 19VDC from an AC/DC adaptor. The AC/DC adaptor can accept universal AC input voltage (100V-240VAC). The RF output power of the Bluetooth module is fixed at -8dBm during test. BlueTooth Module Modulation Type: GFSK Antenna Type: Integral, Internal (PCB Trace) Frequency Range: 2402MHz - 2480MHz, 1MHz channel spacing, 79 channels The functions of main ICs are mentioned below. 1. BlueTooth module: 1) U100 (BCM20771) acts as the 2.4GHz radio core of Bluetooth module (BT3GMD-A03P) which is integrating with audio CODEC. 2) C6, C5, L4, C3, L2, C1 and C7 act as antenna matching network. 3) Y2 provides system clock (oscillation frequency 26MHz). 4) U24, U25 (LM358) are op-amp for audio signal buffering. 2. Power supply module: 1) U5 (RT8258GE) acts as buck regulator providing 5V DC. 2) U19 (LM1117-3.3) acts as 3.3V DC regulator. 3. DSP module: 1) U2 (SE-W58-11) acts as audio DSP core. 2) U1 (CS5343) acts as stereo analog-to-digital converter. 3) U3 (M25P40) acts as 4Mbit flash memory. 4) U4 (UTC1117) acts as 1.5V DC regulator. 4. Analog Input Module: 1) U7 (PT2314) acts as analog signal processor (source selector/volume control/ treble/bass). 5. Digital input module: 1) U6 (CS8416) acts as SPDIF receiver and sampling-rate converter. 2) U8 (CE2711) acts 24bit/192kHz Digital-to-analog converter. 3) JK1 (DLR1180) is TOSLINK optical receiver for optical digital input. 6. MCU module: 1) U27 (GS372AL01-1) acts as the MCU of the Soundbar Unit. 2) U28 (TC7WH04) is the clock signal buffer. 7. Amplifier Module: 1) U18 (TAS5602) acts as the power amplifier for the built-in stereo speakers. 2) U9 (TAS5602) acts as the power amplifier for the separate subwoofer. Channel Frequency Table of Bluetooth Module WLINK TECHNOLOGY LTD. Product Specification __________________________________________________________________________________ Page 1 of 10 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 Features： Bluetooth 3.0 Audi o Module, Class 2 The BT3GMD-A30P offers the following features: ● A2DP1.2 using SBC decoder for streaming audio over Version: V1.0 Bluetooth and AVRCP 1.4 for remote control functionality Mar 2012 ● Configurable seven-band speaker equalization as well as ten presets allowing multiple music listening styles ● High quality 96 dB SNR DACs with 44.1 and 48 kHz sample rates for high-fidelity playback ● Single-chip Bluetooth 3.0 transceiver supporting Bluetooth 2.1 + Enhanced Data Rate (EDR) and Bluetooth 2.0, 1.2, and 1.1 backward compatibility ● Best-in -class Bluetooth radio with up to 8 dBm transmit power and -91dBm receive sensitivity ● Support for side tone and digital microphones ● Supports microphone and speaker HW equalization ● automatic volume control (AVC) ● Switching regulator, battery charger, and power management unit ● Supports fast charging, power dissipation monitoring, and optional charger voltage regulation ● Dual high quality 8 kHz and 16 kHz audio MIC inputs ● Multilanguage voice prompt ● Voice command recognition Product Description: The BT3GMD-A30P is a Bluetooth 3.0 Module solution integrating common components required for cost and performance-optimized stereo headset designs. The BT3GMD-A30P also delivers differentiating features including enhanced audio quality, reduced charging times, A2DP, and multipoint connections through the integration of various noise suppression technologies, noise and echo reduction headset, for high-end WLINK TECHNOLOGY LTD. Product Specification __________________________________________________________________________________ Page 2 of 10 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 and cost and performance-optimized stereo headsets. The BT3GMD-A30P supports Bluetooth SIG-compliant wideband speech implementation to greatly enhance the audio quality with both PCs and cell phones. The BT3GMD-A30P supports the Bluetooth 3.0 standard, adding enhanced power control, simple and secure pairing, and enhanced inquiry response as value-added features for Bluetooth headsets. All major functional blocks required for a Bluetooth stereo headset, including switcher, charger, and stereo audio codec are The module includes EEPROM, crystal, and PCB antenna. Applications: ● High-End Stereo Wireless Headsets ● High-END Mono Headsets ● Hands-Free Car Kits ● Wireless Speakers Functional Block Diagram: Figure 1: BT30MD-A30P Block Diagram WLINK TECHNOLOGY LTD. Product Specification __________________________________________________________________________________ Page 3 of 10 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 Physical Description: The BT30MD-A30P is a 13.5mm×22mm FR4 PCB with 30 pads located around the perimeter. Table 1 shows the pinout diagram of the module. Table 1 Pin Location Figure 2: Module PCB Top View WLINK TECHNOLOGY LTD. Product Specification __________________________________________________________________________________ Page 4 of 10 Taiwan H/Q Add.: No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan (R.O.C.) Tel: +886-3-4811534 Table 2 Pin Function Descriptions WLINK TECHNOLOGY LTD. Product Specification ________________________________________________________________________________…

Text truncated - open the document above for the full version.

1 2 3 4 5 6 78 ABCD 8 7 6 5 4 3 2 1 D CBA Product Name Schematic Name Revision Page Date Drawing byAuthorize by WLINK Auditing by Li Mei Hai BT3 GMD -A30P BT3 GMD -A30P 1 of 1 1.0 20120308 C2 2.2uF C5 10nF C7 10pF C10 10pF C8 2.2uF C11 0.01uF R1 5.1R L2 3.9nH C1 1.5pF C3 3pF 1P2VC VDDRF HVLDO 1 2 3 4 Y 2 26MHZ C12 12pF C14 10pF R3 10K C17 0.01uF 1 2 FB1 600@ 100Mhz 1P2VC C18 0.1uF C19 0.1uF R5 4.7K R6 4.7K R7 4.7K E0 1 E1 2 E2 3 VSS 4 SDA 5 SCL 6 WP 7 VCC 8 U2 24C256 C20 0.1uF C4 10uF VBATT L1 10uH C3 10uF C6 1uF C9 1uF HVLDO C13 1uF VDD_AUDIO C151uF C16 2.2uF MICREF R215K LED1LED2 VDD_SPK HVLDO HVLDO HVLDO GPIO8_VOL+GPIO9_VOL-GPIO10_MFBGPIO11_LED3 VCHGAUX A4 NPNCNTL C7 VCHG A5 VBAT A7 VBAT_AU_AVDD D9 VLXSWG A9 VFSW A10 VIOMLDO B9 LED1 A6 LED2 B6 SPK_AVDD G10 SPKOUTN1 J9 SPKOUTP1 H9 SPKOUTN2 J10 SPKOUTP2 H10 SPKAVSS H8 MICBIAS H7 AUD_RXP1 H5 AUD_RXN1 J5 AUD_RXP2 H6 AUD_RXN2 J6 MICREF J7 VSSP A8 AVSS B8 AUD_AVSS H4 AUD_AVSS J4 AUD_AVSS G5 AUD_AVSS J8 HVLDO C10 WAKEB B7 AUD_AVDD F6 U 100( C ) BCM20771 RFP F1 V12 B10 VDDPX J1 VDDIF D1 VDDLNA G1 VDDRF H1 VDDTF E1 VDDXO J2 TM1 D2 TM2 C1 XIN J3 XOUT H3 RES H2 U 100( B ) BCM20771 RST_N G9 VDDC A3 VDDC D10 VDDO A2 VDDO E10 GPIO_0 F8 GPIO_1 E7 GPIO_2 C8 GPIO_3 F10 GPIO_4 E9 GPIO_5 D5 GPIO_6 D7 GPIO_7 F9 GPIO_8 D4 GPIO_9 C4 GPIO_10 A1 GPIO_11 B2 GPIO_12 B3 GPIO_13 B5 GPIO_14 E5 GPIO_15 E6 GPIO_16 B1 GPIO_17 F4 VSS G2 VSS E2 VSS F3 VSS C9 VSS E8 U1 00( A ) BCM20771 SPKL_NSPKL_PSPKR_NSPKR_P MIC1_PMIC1_NMIC2_PMIC2_N R8 220K R9 220K RXDTXD HVLDO GPIO16_PLAY MIC1_PMIC1_NMIC2_PMIC2_N MICBIAS MICBIASSPKL_NSPKL_PSPKR_NSPKR_PGPIO10_MFBGPIO9_VOL-GPIO8_VOL+ VCHGAUX NPNCNTL VCHG VCHGAUXVCHGNPNCNTLWKUPLED2LED1GPIO16_PLAYTXDRXD C7 NC L4 1.5nH C5 10pF C 6 NC 123456789 101112131415161718192021222324252627282930 J1 BT3 GMD -A30P RST RSTGPI015_REVGPI014_FWDVOUTVBATTGPIO13_ShutdownGNDGND WKUP 1 ANT1 2402MHz - 2480MHz C21 33pF C22 33pF C23 33pF C24 33pF VOUT GPIO11_LED3 GPI015_REVGPI014_FWDGPIO13_Shutdown SO 2 CE/ 1 WP/ 3 HOLD/ 7 SCK 6 VSS 4 SI 5 VDD 8 VSS H U3 MX25L4006E R11 4.7K R10 4.7K HVLDO Alternative: A or B A B C25 0.1uF WLINK TECHNOLOGY

ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL ALCO CONFIDENTIAL

11 22 33 44 D D C C B B A A CK1 CK2 12 PC1:1 A R K U2 G DS Q1 RG1 RG2 RG3 RS1 DG1 RS2 DA1 CA1 RA5 CE1 C1 VoGnd RF1 RF2 RF4 RF5 RF6 CF2 CY1 F1 T1:1T1:6 F2 A1 K A2 DE1 LED RJ4 RA2 RX4 RH1 DH1 43 PC1:2 CF1 NTC2 CS1 RT1 B CE QV1(OP) RV1(OP) ZD1(OP) T1:4T1:3 CH2 CV1(OP) CB2 CB1 RX5 C2(OP) FS1 T3.15AL/250V LF2:1 LN VDR1(OP) DB1DB2DB3DB4 LF2:2 NTC1(OP) LAT 1 NC 7 OUT 5 VCC 6 COMP 2 GND 4 CS 3 HV 8 U1 LD7750A RA4 CH1 C3(OP) CE2 LF1:1LF1:2 RB1 RA3 RJ1RJ2RJ3 CX1 RX1RX2RX3 RL :Safety Component:Optional (OP) RB2RB3 RT2 DE1* E8030-60150 Page of 098-30238 00 A ISO No.:OP-04-300-06 Rev:1.6 :7 Mrsun,Tang XJM,Xian Oubao,Wang 2010-11-17 11

INTERTEK TESTING SERVICES Report No.: HK12061489-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) Bandwidth / Bandedge Plot – Pursuant to FCC Part 15 Section 15. 249 Requirement (Pass/Fail)

INTERTEK TESTING SERVICES Report No.: HK12061489-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 172.5 kHz 49.50 N gnd -15.33 2 CISPR Average208.5 kHz 32.65 N gnd -20.61 1 Quasi Peak 213 kHz 45.57 N gnd -17.51 2 CISPR Average240 kHz 34.66 N gnd -17.43 1 Quasi Peak 402 kHz 46.09 L1 gnd -11.71 2 CISPR Average402 kHz 37.01 L1 gnd -10.79 1 Quasi Peak 411 kHz 48.25 N gnd -9.37 2 CISPR Average415.5 kHz 40.23 N gnd -7.30 1 Quasi Peak 766.5 kHz 39.82 L1 gnd -16.17 2 CISPR Average766.5 kHz 32.77 N gnd -13.22 1 Quasi Peak 1.0815 MHz 38.62 N gnd -17.37 2 CISPR Average1.086 MHz 30.42 N gnd -15.57 2 CISPR Average1.203 MHz 32.15 N gnd -13.84 1 Quasi Peak 1.2165 MHz 39.89 N gnd -16.10 1 Quasi Peak 1.5315 MHz 37.90 L1 gnd -18.09 2 CISPR Average1.617 MHz 30.27 L1 gnd -15.72 2 CISPR Average2.1255 MHz 28.36 N gnd -17.63 1 Quasi Peak 2.859 MHz 32.37 N gnd -23.62 1 Quasi Peak 3.183 MHz 34.62 N gnd -21.37 2 CISPR Average3.3045 MHz 26.41 N gnd -19.58 EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 2 CISPR Average4.758 MHz 26.01 L1 gnd -19.98 1 Quasi Peak 4.7805 MHz 32.69 N gnd -23.30 2 CISPR Average24.576 MHz 35.95 N gnd -14.04 Conducted Plot – Pursuant to FCC Part 15 Requirement (Pass/Fail) INTERTEK TESTING SERVICES Report No.: HK12061489-1 Sample No.: 1/1 Code: FCC15C_f / Effective Date: 24 Jun 2011 ( of ) 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Conducted Plot – Pursuant to FCC Part 15 Requirement (Pass/Fail)

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: HK12061489-1(R1) ALCO Electronics Ltd. Application For Certification (Original Grant) (FCC ID: A2HPA5075U-1SPA) (IC: 9903A-PA5075U1SPA) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Engineer Chan Chi Hung, Terry Assistant Supervisor Date: August 13, 2012 INTERTEK TESTING SERVICES Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA i GENERAL INFORMATION ALCO Electronics Ltd. BRAND NAME: TOSHIBA, MODEL: PA5075U-1SPA FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Grantee: ALCO Electronics Ltd. Grantee Address: 11/F., Zung Fu Industrial Building, 1067 King’s Road, Quarry Bay, Hong Kong. Contact Person: Peggy Suen Tel: 852-2562 6121 Fax: 852-2597 5201 e-mail: [email protected] Manufacturer: Dongguan Houjie Alco Electronics General Factory Manufacturer Address: The 3 rd Industrial District, Houjie, Dongguan, Guangdong, P.R.C. Brand Name: TOSHIBA Model: PA5075U-1SPA Type of EUT: Transceiver Description of EUT: Mini 3D Soundbar with Subwoofer Serial Number: N/A FCC ID / IC: A2HPA5075U-1SPA / 9903A-PA5075U1SPA Date of Sample Submitted: June 27, 2012 Date of Test: August 07, 2012 Report No.: HK12061489-1 Report Date: August 13, 2012 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA ii SUMMARY OF TEST RESULT ALCO Electronics Ltd. BRAND NAME: TOSHIBA, MODEL: PA5075U-1SPA FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA TEST SPECIFICATION REFERENCE RESULTS Maximum Peak Output Power 15.247(b), (c) / RSS-210 A8.4 N/A Hopping Channel Carrier Frequencies Separation 15.247(e) / RSS-210 A8.1 N/A 20dB Bandwidth of the Hopping Channel 15.247(a) / RSS-210 A8.1 N/A Number of Hopping Frequencies 15.247(e) / RSS-210 A8.1 N/A Average Time of Occupancy of Hopping Frequency 15.247(e) / RSS-210 A8.1 N/A Antenna Conducted Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A Radiated Spurious Emissions 15.247(d) / RSS-210 A8.5 N/A RF Exposure Compliance 15.247(i) / RSS-Gen 5.6 N/A Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 7.2.4 Pass Transmitter Field Strength 15.227 / RSS-310 3.8 N/A Transmitter Field Strength 15.229 / RSS-210 A2.7 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(a) / RSS-210 A1.1.1 N/A Transmitter Field Strength, Bandwidth and Timing Requirement 15.231(e) / RSS-210 A1.1.5 N/A Transmitter Field Strength and Bandwidth Requirement 15.239 / RSS-210 A2.8 N/A Transmitter Field Strength and Bandwidth Requirement 15.249 / RSS-210 A2.9 Pass Transmitter Field Strength and Bandwidth Requirement 15.235 / RSS-310 3.9 N/A Receiver / Digital Device Radiated Emissions 15.109 / RSS-210 2.5 N/A Digital Device Conducted Emissions 15.107 / ICES-003 N/A Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA iii Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 1 1.4 Test Facility .................................................................................................. 1 2.0 System Test Configuration ............................................................................ 2 2.1 Justification................................................................................................... 2 2.2 EUT Exercising Software .............................................................................. 2 2.3 Special Accessories...................................................................................... 2 2.4 Equipment Modification................................................................................. 2 2.5 Measurement Uncertainty ............................................................................. 2 2.6 Support Equipment List and Description............................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Configuration Photographs Worst-Case Radiated Emissions (Front View) Model: PA5075U-1SPA HK12061489-1 PA5075U-1SPA side B INTERTEK TESTING SERVICE Report No: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA Configuration Photographs Worst-Case Radiated Emissions (Rear View) Model: PA5075U-1SPA HK12061489-1 PA5075U-1SPA side B

INTERTEK TESTING SERVICE Report No: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) Model: PA5075U-1SPA INTERTEK TESTING SERVICE Report No: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) Model: PA5075U-1SPA INTERTEK TESTING SERVICE Report No: HK12061489-1 FCC ID: A2HPA5075U-1SPA IC: 9903A-PA5075U1SPA iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View) Model: PA5075U-1SPA