A2HRCT6213W8711.6 INCH Android Tablet

Equipment tested forcompliance as acomplete unit This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a reside ntial installation. This equipment generates, uses, and c an radiate radio frequency energy and, if not insta lled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, th e user is encouraged to try to correct the interference by one or more of the following measures:s฀ 2EORIENT฀ OR฀ RELOCATE฀ THE฀ RECEIVING฀ ANTENNA s฀ )NCREASE฀ THE฀ SEPARATION฀ BETWEEN฀ THE฀ EQUIPMENT฀ AND฀ RECEIVER s฀ #ONNECT฀ THE฀ EQUIPMENT฀ INTO฀ AN฀ OUTLET฀ ON฀ A฀ CIRCUIT฀ DIFFERENT฀ FROM฀ THAT฀ TO฀ WHICH฀ THE฀ RECEIVER฀ IS฀ CONNECTED s฀ #ONSULT฀ THE฀ DEALER฀ OR฀ AN฀ EXPERIENCED฀ RADIO46฀ TECHNICIAN฀ FOR฀ HELP Warning: ฀#HANGES฀OR฀MODIFICATIONS฀NOT฀EXPRESSLY฀APPROVED฀BY฀THE฀PARTY฀RESPONSIBLE฀FOR฀COMPLIANCE฀-,"฀)NTERNATIONAL฀)NC ฀0/฀ "OX฀ ฀,OCKPORT ฀.9 ฀ ฀฀4EL฀   ฀COULD฀VOID฀THE฀USERS฀AUTHORITY฀TO฀OPERATE฀THE฀EQUIPMENT CAN ICES-3(B) / NMB-3(B)4HIS฀ DEVICE฀ COMPLIES฀ WITH฀ )NDUSTRY฀ #ANADA฀ ,ICENCE E XEMPT฀ 233 ฀ /PERATION฀ IS฀ SUBJECT฀ TO฀ THE฀ FOLLOWIN G฀ TWO฀ CONDITIONS฀ (1) this device may not cause interference, and (2) this devi ce must accept any interference, including interference th at may cause undesired operation of the device. CT9213W87 DKCT9303W87 DK Warning: the AC adapter is used as disconnect device and it should rema in readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC ฀ ADAPTER฀ SHOULD฀ BE฀ DISCONNECTED฀ FROM฀ THE฀ MAINS฀ SOCKET฀ OUTLET ฀ completely.3OME฀ OF฀ THE฀ FOLLOWING฀ INFORMATION฀ MAY฀ NOT฀ APPLY฀ TO฀ YOUR฀ PARTICULAR฀ PRODUCT฀ HOWEVER ฀ AS฀ WITH฀ ANY฀ ELECT RONIC฀ PRODUCT ฀ PRECAUTIONS฀ should be observed during handling and use.s฀ ฀ 2EAD฀ THESE฀ INSTRUCTIONS s฀ ฀ +EEP฀ THESE฀ INSTRUCTIONS s฀ ฀ (EED฀ ALL฀ WARNINGS s฀ ฀ &OLLOW฀ ALL฀ INSTRUCTIONS s฀ ฀ $O฀ NOT฀ USE฀ THIS฀ APPARATUS฀ NEAR฀ WATER s฀ #LEAN฀ ONLY฀ WITH฀ DRY฀ CLOTH s฀ ฀ $O฀ NOT฀ BLOCK฀ ANY฀ VENTILATION฀ OPENINGS฀ )NSTALL฀ IN฀ ACCORDANCE฀ WITH฀ THE฀ MANUFACTURERS฀ INSTRUCTIONS s฀ ฀ $O฀ NOT฀ INSTALL฀ NEAR฀ ANY฀ HEAT฀ SOURCES฀ SUCH฀ AS฀ RADIATORS ฀ HEAT฀ REGISTERS ฀ STOVES ฀ OR฀ OTHER฀ APPARATUS฀ INCLUDING฀ AMPLIlERS ฀ THAT฀ produce heat. s฀ 0ROTECT฀ THE฀ POWER฀ CORD฀ FROM฀ BEING฀ WALKED฀ ON฀ OR฀ PIN CHED฀ PARTICULARLY฀ AT฀ PLUGS ฀ CONVENIENCE฀ RECEPTACLES ฀ AND฀ THE฀ POINT฀ WHERE฀ THEY฀ EXIT฀ FROM฀ THE฀ APPARATUS s฀ ฀ /NLY฀ USE฀ ATTACHMENTS฀ ฀ ACCESSORIES฀ SPECIlED฀ BY฀ THE฀ MANUFACTURER s฀ 5NPLUG฀ THIS฀ APPARATUS฀ DURING฀ LIGHTNING฀ STORMS฀ OR฀ WHEN฀ UNUSED฀ FOR฀ LONG฀ PERIODS฀ OF฀ TIME s฀ ฀ 2EFER฀ ALL฀ SERVICING฀ TO฀ QUALIFIED฀ SERVICE฀ PERSONNE L฀ 3ERVICING฀ IS฀ REQUIRED฀ WHEN฀ THE฀ APPARATUS฀ HAS฀ BEE N฀ DAMAGED฀ IN฀ ANY฀ WAY ฀ SUCH฀ AS฀ POWER SUPPLY฀ CORD฀ OR฀ PLUG฀ IS฀ DAMAGED ฀ LIQUID฀ HAS฀ BEEN฀ SPILLED฀ OR฀ OBJECTS฀ HAVE฀ FALLEN฀ INTO฀ THE฀ APPARATUS ฀ THE฀ APPARATUS฀ HAS฀ BEEN฀ EXPOSED฀ TO฀ RAIN฀ OR฀ MOISTURE ฀ DOES฀ NOT฀ OPERATE฀ NORMALLY ฀ OR฀ HAS฀ BEEN฀ DROPPED IMPORTANT SAFETY INSTRUCTIONSADDITIONAL SAFETY INFORMATIONs฀ 4HE฀ !#฀ ADAPTER฀ AND฀ APPARATUS฀ SHALL฀ NOT฀ BE฀ EXPOSED฀ TO฀ DRIPPING฀ OR฀ SPLASHING฀ AND฀ NO฀ OBJECTS฀ FILLED฀ WITH ฀ LIQUIDS ฀ SUCH฀ AS฀ vases, shall be placed on the apparatus. s฀ !LWAYS฀ LEAVE฀ SUFlCIENT฀ SPACE฀ AROUND฀ THE฀ PRODUCT฀ FOR฀ VENTILATION฀ $O฀ NOT฀ PLACE฀ PRODUCT฀ IN฀ OR฀ ON฀ A฀ BED ฀ RUG ฀ IN฀ A฀ BOOKCASE฀ OR฀ cabinet that may prevent air flow through vent openings. s฀ $O฀ NOT฀ PLACE฀ LIGHTED฀ CANDLES ฀ CIGARETTES ฀ CIGARS ฀ ETC฀ ON฀ THE฀ PRODUCT s฀ #ARE฀ SHOULD฀ BE฀ TAKEN฀ SO฀ THAT฀ OBJECTS฀ DO฀ NOT฀ FALL฀ INTO฀ THE฀ PRODUCT s฀ $O฀ NOT฀ ATTEMPT฀ TO฀ DISASSEMBLE฀ THE฀ CABINET฀ 4HIS฀ PRODUCT฀ DOES฀ NOT฀ CONTAIN฀ CUSTOMER฀ SERVICEABLE฀ COMPONENTS s฀ 4O฀ PREVENT฀ THE฀ RISK฀ OF฀ lRE฀ OR฀ ELECTRIC฀ SHOCK ฀ DO฀ NOT฀ EXPOSE฀ THIS฀ APPARATUS฀ TO฀ RAIN฀ OR฀ MOISTURE s฀ $O฀ NOT฀ PLAY฀ YOUR฀ HEADSET฀ AT฀ HIGH฀ VOLUME฀ (EARING฀ EXPERTS฀ WARN฀ AGAINST฀ EXTENDED฀ HIGH VOLUME฀ PLAY Copyright and Trademark Notices!NDROID ฀'OOGLE ฀'OOGLE฀0LAY฀AND฀OTHER฀MARKS฀ARE฀TRADEMARKS฀OF฀'OOGLE฀)NC4HE฀7I &I฀ #%24)&)%$฀ ,OGO฀ IS฀ A฀ CERTIFICATION฀ MARK฀ OF฀ THE฀7I &I฀ !LLIANCE฀4HE฀7I &I฀ 0ROTECTED฀ 3ETUP฀ -ARK฀ IS฀ A฀ MARK฀ OF฀ THE฀7I &I฀ Alliance. The Bluetooth ® ฀ WORD฀ MARK฀ AND฀ LOGOS฀ ARE฀ REGISTERED฀ TRADEMARKS฀ OWNED฀ BY฀ THE฀ Bluetooth ฀ 3)'฀ )NC฀ /THER฀ TRADEMARKS฀ AND฀ TRADE฀ names are those of their respective owners. About HDMI(IGH $ElNITION฀-ULTIMEDIA฀)NTERFACE฀($-) ฀IS฀A฀HIGH SPEED฀DIGITAL฀INTERFACE฀THAT฀CAN฀TRANSMIT฀UNCOMPRESSED฀HIGH฀DElNITION฀VIDEO฀ AND฀ DIGITAL฀ MULTICHANNEL฀ AUDIO฀ )T฀ DELIVERS฀ HIGH฀ QUALITY฀ PICTURE฀ AND฀ SOUND฀ QUALITY฀ ($-)฀ IS฀ FULLY฀ BACKWARD฀ COMPATIBLE฀ WITH฀ $6)฀ !S฀ REQUIRED฀BY฀THE฀($-)฀STANDARD ฀CONNECTING฀TO฀($-)฀OR฀$6)฀PRODUCTS฀WITHOUT฀($#0฀(IGH฀BANDWIDTH฀$IGITAL฀#ONTENT฀0ROTECTION ฀ WILL฀RESULT฀IN฀NO฀6IDEO฀OR฀!UDIO฀OUTPUT 4HE฀TERMS฀($-)฀AND฀($-)฀(IGH $ElNITION฀-ULTIMEDIA฀)NTERFACE ฀AND฀THE฀($-)฀,OGO฀ARE฀TRADEMARKS฀OR฀REGISTERED฀TRADEMARKS฀OF฀ ($-)฀,ICENSING฀,,#฀IN฀THE฀5NITED฀3TATES฀AND฀OTHER฀COUNTRIES !LL฀OTHER฀TRADEMARK฀APPEARING฀HEREIN฀ARE฀THE฀PROPERTY฀OF฀THEIR฀RESPECTIVE฀OWNERS฀3PECIFICATIONS฀SUBJECT฀TO฀CHANGE฀WITHOUT฀NOTICE Turning on your tablet for the first timeTablet docking Press and hold the Power butto…

Text truncated - open the document above for the full version.

Equipment tested forcompliance as acomplete unit This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a reside ntial installation. This equipment generates, uses, and c an radiate radio frequency energy and, if not insta lled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, th e user is encouraged to try to correct the interference by one or more of the following measures:s฀ 2EORIENT฀ OR฀ RELOCATE฀ THE฀ RECEIVING฀ ANTENNA s฀ )NCREASE฀ THE฀ SEPARATION฀ BETWEEN฀ THE฀ EQUIPMENT฀ AND฀ RECEIVER s฀ #ONNECT฀ THE฀ EQUIPMENT฀ INTO฀ AN฀ OUTLET฀ ON฀ A฀ CIRCUIT฀ DIFFERENT฀ FROM฀ THAT฀ TO฀ WHICH฀ THE฀ RECEIVER฀ IS฀ CONNECTED s฀ #ONSULT฀ THE฀ DEALER฀ OR฀ AN฀ EXPERIENCED฀ RADIO46฀ TECHNICIAN฀ FOR฀ HELP Warning: ฀#HANGES฀OR฀MODIFICATIONS฀NOT฀EXPRESSLY฀APPROVED฀BY฀THE฀PARTY฀RESPONSIBLE฀FOR฀COMPLIANCE฀-,"฀)NTERNATIONAL฀)NC ฀0/฀ "OX฀ ฀,OCKPORT ฀.9 ฀ ฀฀4EL฀   ฀COULD฀VOID฀THE฀USERS฀AUTHORITY฀TO฀OPERATE฀THE฀EQUIPMENT CAN ICES-3(B) / NMB-3(B)4HIS฀ DEVICE฀ COMPLIES฀ WITH฀ )NDUSTRY฀ #ANADA฀ ,ICENCE E XEMPT฀ 233 ฀ /PERATION฀ IS฀ SUBJECT฀ TO฀ THE฀ FOLLOWIN G฀ TWO฀ CONDITIONS฀ (1) this device may not cause interference, and (2) this devi ce must accept any interference, including interference th at may cause undesired operation of the device. RCT6213W87 DKRCT6303W87 DK Warning: the AC adapter is used as disconnect device and it should rema in readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC ฀ ADAPTER฀ SHOULD฀ BE฀ DISCONNECTED฀ FROM฀ THE฀ MAINS฀ SOCKET฀ OUTLET฀ completely.3OME฀ OF฀ THE฀ FOLLOWING฀ INFORMATION฀ MAY฀ NOT฀ APPLY฀ TO฀ YOUR฀ PARTICULAR฀ PRODUCT฀ HOWEVER ฀ AS฀ WITH฀ ANY฀ ELECT RONIC฀ PRODUCT ฀ PRECAUTIONS฀ should be observed during handling and use.s฀ ฀ 2EAD฀ THESE฀ INSTRUCTIONS s฀ ฀ +EEP฀ THESE฀ INSTRUCTIONS s฀ ฀ (EED฀ ALL฀ WARNINGS s฀ ฀ &OLLOW฀ ALL฀ INSTRUCTIONS s฀ ฀ $O฀ NOT฀ USE฀ THIS฀ APPARATUS฀ NEAR฀ WATER s฀ #LEAN฀ ONLY฀ WITH฀ DRY฀ CLOTH s฀ ฀ $O฀ NOT฀ BLOCK฀ ANY฀ VENTILATION฀ OPENINGS฀ )NSTALL฀ IN฀ ACCORDANCE฀ WITH฀ THE฀ MANUFACTURERS฀ INSTRUCTIONS s฀ ฀ $O฀ NOT฀ INSTALL฀ NEAR฀ ANY฀ HEAT฀ SOURCES฀ SUCH฀ AS฀ RADIATORS ฀ HEAT฀ REGISTERS ฀ STOVES ฀ OR฀ OTHER฀ APPARATUS฀ INCLUDING฀ AMPLIlERS ฀ THAT฀ produce heat. s฀ 0ROTECT฀ THE฀ POWER฀ CORD฀ FROM฀ BEING฀ WALKED฀ ON฀ OR฀ PIN CHED฀ PARTICULARLY฀ AT฀ PLUGS ฀ CONVENIENCE฀ RECEPTACLES ฀ AND฀ THE฀ POINT฀ WHERE฀ THEY฀ EXIT฀ FROM฀ THE฀ APPARATUS s฀ ฀ /NLY฀ USE฀ ATTACHMENTS฀ ฀ ACCESSORIES฀ SPECIlED฀ BY฀ THE฀ MANUFACTURER s฀ 5NPLUG฀ THIS฀ APPARATUS฀ DURING฀ LIGHTNING฀ STORMS฀ OR฀ WHEN฀ UNUSED฀ FOR฀ LONG฀ PERIODS฀ OF฀ TIME s฀ ฀ 2EFER฀ ALL฀ SERVICING฀ TO฀ QUALIFIED฀ SERVICE฀ PERSONNE L฀ 3ERVICING฀ IS฀ REQUIRED฀ WHEN฀ THE฀ APPARATUS฀ HAS฀ BEE N฀ DAMAGED฀ IN฀ ANY฀ WAY ฀ SUCH฀ AS฀ POWER SUPPLY฀ CORD฀ OR฀ PLUG฀ IS฀ DAMAGED ฀ LIQUID฀ HAS฀ BEEN฀ SPILLED฀ OR฀ OBJECTS฀ HAVE฀ FALLEN฀ INTO฀ THE฀ APPARATUS ฀ THE฀ APPARATUS฀ HAS฀ BEEN฀ EXPOSED฀ TO฀ RAIN฀ OR฀ MOISTURE ฀ DOES฀ NOT฀ OPERATE฀ NORMALLY ฀ OR฀ HAS฀ BEEN฀ DROPPED IMPORTANT SAFETY INSTRUCTIONSADDITIONAL SAFETY INFORMATIONs฀ 4HE฀ !#฀ ADAPTER฀ AND฀ APPARATUS฀ SHALL฀ NOT฀ BE฀ EXPOSED฀ TO฀ DRIPPING฀ OR฀ SPLASHING฀ AND฀ NO฀ OBJECTS฀ FILLED฀ WITH ฀ LIQUIDS ฀ SUCH฀ AS฀ vases, shall be placed on the apparatus. s฀ !LWAYS฀ LEAVE฀ SUFlCIENT฀ SPACE฀ AROUND฀ THE฀ PRODUCT฀ FOR฀ VENTILATION฀ $O฀ NOT฀ PLACE฀ PRODUCT฀ IN฀ OR฀ ON฀ A฀ BED ฀ RUG ฀ IN฀ A฀ BOOKCASE฀ OR฀ cabinet that may prevent air flow through vent openings. s฀ $O฀ NOT฀ PLACE฀ LIGHTED฀ CANDLES ฀ CIGARETTES ฀ CIGARS ฀ ETC฀ ON฀ THE฀ PRODUCT s฀ #ARE฀ SHOULD฀ BE฀ TAKEN฀ SO฀ THAT฀ OBJECTS฀ DO฀ NOT฀ FALL฀ INTO฀ THE฀ PRODUCT s฀ $O฀ NOT฀ ATTEMPT฀ TO฀ DISASSEMBLE฀ THE฀ CABINET฀ 4HIS฀ PRODUCT฀ DOES฀ NOT฀ CONTAIN฀ CUSTOMER฀ SERVICEABLE฀ COMPONENTS s฀ 4O฀ PREVENT฀ THE฀ RISK฀ OF฀ lRE฀ OR฀ ELECTRIC฀ SHOCK ฀ DO฀ NOT฀ EXPOSE฀ THIS฀ APPARATUS฀ TO฀ RAIN฀ OR฀ MOISTURE s฀ $O฀ NOT฀ PLAY฀ YOUR฀ HEADSET฀ AT฀ HIGH฀ VOLUME฀ (EARING฀ EXPERTS฀ WARN฀ AGAINST฀ EXTENDED฀ HIGH VOLUME฀ PLAY Copyright and Trademark Notices!NDROID ฀'OOGLE ฀'OOGLE฀0LAY฀AND฀OTHER฀MARKS฀ARE฀TRADEMARKS฀OF฀'OOGLE฀)NC4HE฀7I &I฀ #%24)&)%$฀ ,OGO฀ IS฀ A฀ CERTIFICATION฀ MARK฀ OF฀ THE฀7I &I฀ !LLIANCE฀4HE฀7I &I฀ 0ROTECTED฀ 3ETUP฀ -ARK฀ IS฀ A฀ MARK฀ OF฀ THE฀7I &I฀ Alliance. The Bluetooth ® ฀ WORD฀ MARK฀ AND฀ LOGOS฀ ARE฀ REGISTERED฀ TRADEMARKS฀ OWNED฀ BY฀ THE฀ Bluetooth ฀ 3)'฀ )NC฀ /THER฀ TRADEMARKS฀ AND฀ TRADE฀ names are those of their respective owners. About HDMI(IGH $ElNITION฀-ULTIMEDIA฀)NTERFACE฀($-) ฀IS฀A฀HIGH SPEED฀DIGITAL฀INTERFACE฀THAT฀CAN฀TRANSMIT฀UNCOMPRESSED฀HIGH฀DElNITION฀VIDEO฀ AND฀ DIGITAL฀ MULTICHANNEL฀ AUDIO฀ )T฀ DELIVERS฀ HIGH฀ QUALITY฀ PICTURE฀ AND฀ SOUND฀ QUALITY฀ ($-)฀ IS฀ FULLY฀ BACKWARD฀ COMPATIBLE฀ WITH฀ $6)฀ !S฀ REQUIRED฀BY฀THE฀($-)฀STANDARD ฀CONNECTING฀TO฀($-)฀OR฀$6)฀PRODUCTS฀WITHOUT฀($#0฀(IGH฀BANDWIDTH฀$IGITAL฀#ONTENT฀0ROTECTION ฀ WILL฀RESULT฀IN฀NO฀6IDEO฀OR฀!UDIO฀OUTPUT 4HE฀TERMS฀($-)฀AND฀($-)฀(IGH $ElNITION฀-ULTIMEDIA฀)NTERFACE ฀AND฀THE฀($-)฀,OGO฀ARE฀TRADEMARKS฀OR฀REGISTERED฀TRADEMARKS฀OF฀ ($-)฀,ICENSING฀,,#฀IN฀THE฀5NITED฀3TATES฀AND฀OTHER฀COUNTRIES !LL฀OTHER฀TRADEMARK฀APPEARING฀HEREIN฀ARE฀THE฀PROPERTY฀OF฀THEIR฀RESPECTIVE฀OWNERS฀3PECIFICATIONS฀SUBJECT฀TO฀CHANGE฀WITHOUT฀NOTICE Turning on your tablet for the first timeTablet docking Press and hold the Power butt…

Text truncated - open the document above for the full version.

Electronics Limited A member of the ALCO group 11/F Zung Fu Industrial Building,1067 King’s Road, Quarry Bay, Hong Kong Tel: (852) 2562 6121, Fax: (852) 2597 5201 , (852) 2811 1056 Letter of Agency "I, an officer of Alco Electronics Ltd., do hereby authorize Intertek Testing Services (Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 2 nd day of March, 2015 By _____________ ____ Signature _ Peggy Suen_____ _ ____ Printed Name _ Secretary, Engineering Dept. __ Title Remark: The person who signs this authorization letter must be the grantee contact of record in the Grantee Code data base.

Electronics Limited A member of the ALCO group 11/F Zung Fu Industrial Building,1067 King’s Road, Quarry Bay, Hong Kong Tel: (852) 2562 6121, Fax: (852) 2597 5201 , (852) 2811 1056 Attention: Application Examiner Re: Request for confidentiality Applicant: Alco Electronics Ltd. FCC ID: A2HRCT6213W87 To whom it may concern, Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by Alco Electronics Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request is hereby submitted by Alco Electronics Ltd. to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: [Select one or more of items below that are not selected in the list above, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description • Test setup photos • External photos • Internal photos • User manual Rationale for request for confidentiality: Alco Electronics Ltd. has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality: Disclosure of the shortterm confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] Secretary, Engineering Dept. [Title] Alco Electronics Ltd. [Company name] Peggy Suen

INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External) INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External) INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External) INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External) INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External) INTERTEK TESTING SERVICE Report No.: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (External)

MODEL: CT9213W87 BRANDNAME: VENTURER DC 5V RESET MIC POWER HDMI MODEL / MODÈLE: CT9213W87DC / C.C. 5V 2.0A FCC ID: A2HRCT6213W87IC: 9903A-RCT6213W87 CAN ICES-3(B) / NMB-3(B)Made in China / Fabriqué en Chine Brand Name Letter size 1mm

Letter size 1mm Brand Name

INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal)

INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal)

INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal) INTERTEK TESTING SERVICE Report No: 15011110HKG-001 FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Equipment Photographs Model: CT9213W87 (Internal)

Analysis Report Report No.: 1501111 0HKG-001 The Equipment Under Test (EUT) is a Tablet, equipped with keyboard, headphone, WiFi, Bluetooth, SD, HDMI and USB Interface. For WiFi, the EUT operates in a frequency range from 2412MHz to 2462MHz at 802.11b,g,n HT20 (11 channels with 5MHz spacing) while from 2422MHz to 2452MHz at 802.11n HT40 (7 channels with 5MHz channel spacing). For Bluetooth 4.0 BLE, the EUT occupies a frequency range from 2402MHz to 2480MHz (40 channels with channel spacing of 2MHz). The EUT is powered by an external AC/DC adaptor (5VDC output) or/and internal 3.7VDC (2x 3.7V rechargeable battery). The adaptor accepts 100-240VAC. The applicant declared that only WiFi 2.4GHz band and Bluetooth 4.0 BLE functions are used in this product. GPS, FM, NFC, Bluetooth 3.0 features will not be used in this product. WiFi 802.11b, 802.11g, 802.11n (HT20): 2412MHz – 2462MHz, 11 channels, 5MHz spacing WiFi 802.11n (HT40): 2422MHz – 2452MHz, 7 channels, 5MHz spacing Bluetooth 4.0 BLE: 2402MHz – 2480MHz, 40 channels, 2MHz spacing Antenna Type: Internal integral antenna Antenna Gain: 0dBi Operating mode Nominal Production Modulation Radiated Tolerance Type Field Strength 802.11b 99.8dBμV/m at 3m +1 /- 3dB DSSS 802.11g 98.8dBμV/m at 3m +1 /- 3dB OFDM 802.11n (HT20) 9 7.8dBμV/m at 3m +1 /- 3dB MCSn (n=1 to 7) 802.11n (HT40) 96. 5dBμV/m at 3m +1 /- 3dB MCSn (n=1 to 7) Bluetooth 4.0 BLE 88. 7dBμV/m at 3m +1 /- 3dB GFSK According to the KDB 447498: For WiFi: Based on the Maximum allowed field strength of production tolerance was 10 0.8dBμV/m at 3m in frequency 2.462GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 3.61mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 3.61mW. The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.462) mW = 9.56 mW For Bluetooth 4.0 BLE: Based on the Maximum allowed field strength of production tolerance was 89.7dBμV/m at 3m in frequency 2.480GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0. 28mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 0. 28mW. The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.53 mW Since the above conducted output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing. Simultaneous Transmission SAR exclusion considerations Since the WiFi and Bluetooth transmitters of this device may operate simultaneously, simultaneous transmission analysis is required. Per KDB 447498, simultaneous transmission SAR test exclusion can be applied when the sum of 1-g SAR of all simultaneously transmitting antennas in an operating mode and exposure condition combination is within the SAR limit ( ≤ 1.6W/kg). When the standalone SAR test exclusion is applied, the standalone 1-g SAR must be estimated according to the following equation, Estimated SAR = )max/()5.7/)((TDPxGHzF where F(GHz) is the RF channel transmit frequency in GHz Pmax is the max. power of channel, including tune-up tolerance, mW TD is the min. test separation distance, mm For WiFi operation, Maximum Time-averaged Conducted Power of this device = 3.61 mW Therefore, the Estimated SAR will be determined as follow, Estimated SAR = )max/()5.7/)((TDPxGHzF = 0. 151 W/kg where Pmax = 3.61 mW, TD = 5 mm and F(GHz) = 2.462 GHz For Bluetooth 4.0 BLE operation, Maximum Time-averaged Conducted Power of this device = 0. 28 mW Therefore, the Estimated SAR will be determined as follow, Estimated SAR = )max/()5.7/)((TDPxGHzF = 0.01 2 W/kg where Pmax = 0. 28mW, TD = 5 mm and F(GHz) = 2.480 GHz Simultaneous Transmission Analysis WiFi SAR (W/kg ) Blueto oth SAR (W/kg) Σ ΣΣ Σ SAR (W/kg) Simultaneous SAR Required 0.151 0.012 0.163 No Conclusion Since the above summed SAR result for all simultaneous transmission conditions were below the SAR limit (1.6 W/kg), SAR evaluation for simultaneous transmission configuration are not required.

- Intertek's standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: 15011110HKG-001 Alco Electronics Ltd Application For Certification (Original Grant) (FCC ID: A2HRCT6213W87) (IC: 9903A-RCT6213W87) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Chan Chi Hung, Terry Senior Supervisor Date: March 23, 2015 INTERTEK TESTING SERVICES Report No.: 15011110HKG-001 i FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Grantee: Alco Electronics Ltd Grantee Address: 11/F., Zung Fu Industrial Building, 1067 King’s Road, Quarry Bay, Hong Kong. Contact Person: Peggy Suen Tel: (852) 2562 6121 Fax: (852) 2597 5201 e-mail: [email protected] Manufacturer: Alco Electronics (Dongguan) Limited Manufacturer Address: Gong Ye Xi Road, Houjie Technology Industrial Park, Houjie, Dongguan, Guangdong P.R.C. 523960 China Brand Name: VENTURER / RCA Model: CT9213W87 / RCT6213W87 Type of EUT: Transceiver Description of EUT: 11.6" Android Tablet Serial Number: N/A FCC ID / IC: A2HRCT6213W87 / 9903A-RCT6213W87 Date of Sample Submitted: January 30, 2015 Date of Test: January 30, 2015 to February 16, 2015 Report No.: 15011110HKG-001 Report Date: March 23, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: 15011110HKG-001 ii FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 8.8 Pass Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 / RSS-210 A2.9, RSS-210 2.5 Pass Radiated Emission in Restricted Bands 15.205 / RSS-210 2.2 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2013 Edition RSS-210 Issue 8, December 2010 RSS-Gen Issue 4, December 2014 Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: 15011110HKG-001 iii FCC ID: A2HRCT6213W87 IC: 9903A-RCT6213W87 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 2 1.4 Test Facility .................................................................................................. 2 2.0 System Test Configuration ............................................................................ 3 2.1 Justification................................................................................................... 3 2.2 EUT Exercising Software .............................................................................. 4 2.3 Special Accessories...................................................................................... 4 2.4 Measurement Uncertainty ............................................................................. 4 2.5 Support Equipment List and Description........................................................ 4 3.0 Emission Results ........................................................................................... 5 3.1 Field Strength Calculation ............................................................................. 5 3.2 Radiat…

Text truncated - open the document above for the full version.