A2HRCT6773W227 Inch Tablet

7” Tablet Computer User Manual It's important to read these instructions prior to using your new product for the first time. CT9773W22 EN - 1 Safety Precautions Equipment tested for compliance as a complete unit FCC Information This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b e d e t e r m i n e d by t u r n i n g t h e equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CT9773W22 EN - 2 CAN ICES-3(B) / NMB-3(B) This device complies with Industry Canada license- exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent apparei l est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C o n s u l t t h e d e a l e r o r a n ex p e r i e n c e d r a d i o / T V technician for help. Warning: C h a n g e s o r m o d i f i c a t i o n s n o t ex p r e s s l y approved by the party responsible for compliance (MLB International Inc., P.O. Box 1535, Buffalo, NY 14226, Tel: 516-236-4556) could void the user’s authority to operate the equipment. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. I n o r d e r to d i s c o n n e c t t h e m a i n s p l u g fr o m m a i n s completely, the AC adapter should be disconnected from the mains socket outlet completely. Service Information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this guide. Caution: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. EN - 3 Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • D o n o t bl o ck a ny ve n t i l a t i o n o p e n i n g s. I n s t a l l i n accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE EN - 4 • Refer all ser vicing to qualified ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This p r o d u c t d o e s n o t c o n t a i n c u s t o m e r s e r v i c e a b l e components. • To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. EN - 5 EN - 6 Safety Precautions .....................................................1 Important Safety Instructions ................................... 4 Startup ..................................................................... 7 Overview of Controls ........................................................ 7 Buttons .......................................................................... 8 Accessories ................................................................... 8 Navigating the Home Screen .........................................…

Text truncated - open the document above for the full version.

7” Tablet Computer User Manual It's important to read these instructions prior to using your new product for the first time. CT9773W23 EN - 1 Safety Precautions Equipment tested for compliance as a complete unit FCC Information This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b e d e t e r m i n e d by t u r n i n g t h e equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CT9773W23 EN - 2 CAN ICES-3(B) / NMB-3(B) This device complies with Industry Canada license- exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent apparei l est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C o n s u l t t h e d e a l e r o r a n ex p e r i e n c e d r a d i o / T V technician for help. Warning: C h a n g e s o r m o d i f i c a t i o n s n o t ex p r e s s l y approved by the party responsible for compliance (MLB International Inc., P.O. Box 1535, Buffalo, NY 14226, Tel: 516-236-4556) could void the user’s authority to operate the equipment. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. I n o r d e r to d i s c o n n e c t t h e m a i n s p l u g fr o m m a i n s completely, the AC adapter should be disconnected from the mains socket outlet completely. Service Information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this guide. Caution: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. EN - 3 Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • D o n o t bl o ck a ny ve n t i l a t i o n o p e n i n g s. I n s t a l l i n accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE EN - 4 • Refer all ser vicing to qualified ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This p r o d u c t d o e s n o t c o n t a i n c u s t o m e r s e r v i c e a b l e components. • To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. EN - 5 EN - 6 Safety Precautions .....................................................1 Important Safety Instructions ................................... 4 Startup ..................................................................... 7 Overview of Controls ........................................................ 7 Buttons .......................................................................... 8 Accessories ................................................................... 8 Navigating the Home Screen .........................................…

Text truncated - open the document above for the full version.

RCT6773W22 7” Tablet Computer User Manual It's important to read these instructions prior to using your new product for the first time. EN - 1 Safety Precautions Equipment tested for compliance as a complete unit FCC Information This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b e d e t e r m i n e d by t u r n i n g t h e equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: RCT6773W22 EN - 2 CAN ICES-3(B) / NMB-3(B) This device complies with Industry Canada license- exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent apparei l est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C o n s u l t t h e d e a l e r o r a n ex p e r i e n c e d r a d i o / T V technician for help. Warning: C h a n g e s o r m o d i f i c a t i o n s n o t ex p r e s s l y approved by the party responsible for compliance (MLB International Inc., P.O. Box 1535, Buffalo, NY 14226, Tel: 516-236-4556) could void the user’s authority to operate the equipment. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. I n o r d e r to d i s c o n n e c t t h e m a i n s p l u g fr o m m a i n s completely, the AC adapter should be disconnected from the mains socket outlet completely. Service Information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this guide. Caution: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. EN - 3 Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • D o n o t bl o ck a ny ve n t i l a t i o n o p e n i n g s. I n s t a l l i n accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE EN - 4 • Refer all ser vicing to qualified ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This p r o d u c t d o e s n o t c o n t a i n c u s t o m e r s e r v i c e a b l e components. • To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. EN - 5 EN - 6 Safety Precautions .....................................................1 Important Safety Instructions ................................... 4 Startup ..................................................................... 7 Overview of Controls ........................................................ 7 Buttons .......................................................................... 8 Accessories ................................................................... 8 Navigating the Home Screen .......................................…

Text truncated - open the document above for the full version.

RCT6773W23 7” Tablet Computer User Manual It's important to read these instructions prior to using your new product for the first time. EN - 1 Safety Precautions Equipment tested for compliance as a complete unit FCC Information This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b e d e t e r m i n e d by t u r n i n g t h e equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: RCT6773W23 EN - 2 CAN ICES-3(B) / NMB-3(B) This device complies with Industry Canada license- exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent apparei l est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • C o n s u l t t h e d e a l e r o r a n ex p e r i e n c e d r a d i o / T V technician for help. Warning: C h a n g e s o r m o d i f i c a t i o n s n o t ex p r e s s l y approved by the party responsible for compliance (MLB International Inc., P.O. Box 1535, Buffalo, NY 14226, Tel: 516-236-4556) could void the user’s authority to operate the equipment. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. I n o r d e r to d i s c o n n e c t t h e m a i n s p l u g fr o m m a i n s completely, the AC adapter should be disconnected from the mains socket outlet completely. Service Information This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this guide. Caution: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. EN - 3 Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • D o n o t bl o ck a ny ve n t i l a t i o n o p e n i n g s. I n s t a l l i n accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE EN - 4 • Refer all ser vicing to qualified ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This p r o d u c t d o e s n o t c o n t a i n c u s t o m e r s e r v i c e a b l e components. • To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. EN - 5 EN - 6 Safety Precautions .....................................................1 Important Safety Instructions ................................... 4 Startup ..................................................................... 7 Overview of Controls ........................................................ 7 Buttons .......................................................................... 8 Accessories ................................................................... 8 Navigating the Home Screen .......................................…

Text truncated - open the document above for the full version.

WiFiInterface MT6627 Datasheet Confidential A MediaTek Confidential © 2014 MediaTek Inc. Page 6 of 30 This document contains information that is proprietary to MediaTek Inc. Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited. GPS RF LNA GPS RF TWSW WiFi / BT Shared RF TRx PA LNA 1.6G / 2.4G Antenna WiFi/BT RF FM Rx Modem FM Rx FM RX RF+AFE Top & 3-wire Ctrl PTA / WBT Control 2.4G RF dedicated ctrl FM DSP WBT 3-wire Ctrl FM 3-wire GPS 3-wire GPS dig Always -On LDO FM CLK FM DATA WiFi/BT Tx IQ WiFi/BT Rx IQ GPS Rx IQ FM Antenna XO in 3-wire IPD Balun + BPF 2.4G/1.6G Diplexer 1.6G 2.4G 50: on PCB LPF Pin 39 Pin 31 Pin 32 GPS RF LNA GPS RF TWSW WiFi / BT Shared RF TRx PA LNA 1.6G / 2.4G Antenna WiFi/BT RF FM Rx Modem FM Rx FM RX RF+AFE Top & 3-wire Ctrl PTA / WBT Control 2.4G RF dedicated ctrl FM DSP WBT 3-wire Ctrl FM 3-wire GPS 3-wire GPS dig Always -On LDO FM CLK FM DATA WiFi/BT Tx IQ WiFi/BT Rx IQ GPS Rx IQ FM Antenna XO in 3-wire IPD Balun + BPF 2.4G/1.6G Diplexer 1.6G 2.4G 50: termination LPF LNA 2.4G/1.6G Diplexer GPS Saw Pin 39 Pin 31 Pin 32 00057797 Block Diagram MT6627N (FM not use in this product) (GPS not use in this product) 802.11b/g/n (HT20) 2412MHz - 2462MHz 802.11n (HT40) 2422MHz - 2452MHz (Bluetooth not use in this product) (no connection to this point) 26MHz crystal (Y2)

Date: 16 May, 2014

INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (External) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (External) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (External)

INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W23, RCT6773W23 IC Model: RCT6773W23 (External) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W23, RCT6773W23 IC Model: RCT6773W23 (External) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W23, RCT6773W23 IC Model: RCT6773W23 (External)

BOTTOM CABINET FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 CAN ICES-3(B) / NMB-3(B) MODEL / MODÈLE: RCT6773W22 DC / C.C. 5V 1.0A - 1.5A Made in China / Fabriqué en Chine SERIAL NO. LABEL Size: 28x7mm figures for example only .S/N:UJ181DL10001 for RCA / RCT6773W22 for VENTURER / CT9773W22 4.5mm FCC ID: A2HRCT6773W22IC: 9903A-RCT6773W22CAN ICES-3(B) / NMB-3(B) MODEL / MODÈLE: RCT6773W22DC / C.C. 5V 1.0A - 1.5AMade in China / Fabriqué en Chine FCC ID: A2HRCT6773W22IC: 9903A-RCT6773W22CAN ICES-3(B) / NMB-3(B) MODEL / MODÈLE: CT9773W22DC / C.C. 5V 1.0A - 1.5AMade in China / Fabriqué en Chine Letter size 2mm

INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, RCT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: RCT6773W22 (Internal) INTERTEK TESTING SERVICE Report No.: 14071181HKG-001 FCC ID: A2HRCT6773W22 IC: 9903A-RCT6773W22 Equipment Photographs FCC Model: CT9773W22, R CT6773W22 IC Model: R…

Text truncated - open the document above for the full version.