A2HSBX5065KUSoundstrip Sound Bar Speaker System

1 For more information see “Troubleshooting” on page 18 in this guide. Owner’s Record The model number and serial number are on the back and underside of your SoundStrip ® . Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this SoundStrip ® . Model name____________________________ Serial number___________________________ SoundStrip ® Sound Bar Speaker System User’s Guide: SBX5065KU If you need assistance: Toshiba’s Support Web site : support.toshiba.com SBX5065KU_IB_R7.indd 12013/7/8 12:19:56 2 Contents Introduction .......................................................................................... 6 Safety icons used in this manual............................................................ 6 SoundStrip ® speaker system controls ................................................... 7 Remote control ................................................................................... 10 SoundStrip ® speaker system placement ............................................. 12 SoundStrip ® speaker system connections ........................................... 13 Troubleshooting .................................................................................. 18 Specifications ..................................................................................... 19 Maintenance ....................................................................................... 19 SBX5065KU_IB_R7.indd 22013/7/8 12:19:56 3 Safety Precautions Important Safety Instructions The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this User’s Guide. To ensure proper use of this product, please read this User’s Guide carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Warnings: • The mains plug is used as disconnect device and it should remain readily operable during intended used. In order to disconnect the apparatus from the mains completely, the main plug should be disconnected from the mains socket outlet completely. The symbol for Class II (Double lnsulation) 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 14. Never expose the apparatus to dripping or splashing or place items such as vases, aquariums, any other item filled with liquid, or candles on top of the unit. 15. Do not place anything on top of this unit. 16. Do not place the apparatus on amplifiers or equipment that may produce heat. 17. Never block or cover the slots or openings in the unit. Never place the unit: • on a bed, sofa, rug or similar surface; • too close to drapes, curtains, or walls; or • in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation. The slots and openings are provided to protect the unit from overheating and to help maintain reliable operation. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC POWER UTLET, THEN FULLY INSERT. CHANGES OR MODIFICATIONS MADE TO THIS EQUIPMENT, NOT EXPRESSLY APPROVED BY TOSHIBA, OR PARTIES AUTHORIZED BY TOSHIBA, COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. SBX5065KU_IB_R7.indd 32013/7/8 12:19:56 4 Additional Safety Instructions 18. If the apparatus should emit smoke or an unusual odor, immediately disconnect the power cord from the wall outlet. Wait until the smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause fire. 19. During thunderstorms, do not touch the connecting cables or the apparatus. 20. Warning: To prevent spread of fire, keep candles or other open flames away from this product at all times. USA Federal Communications Commission Statement FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF ex…

Text truncated - open the document above for the full version.

55 44 33 22 11 D D C C B B A A Size: Rev: Sheet: of Title:MODEL: COMPANY: ALCO Electronics Limited Date: Data:Date: Drawn:Checked: Approved: LAST SAVED DATE: 1.0 Friday, July 05, 2013 55 Custom YY-MM-DD Drawn by Checked by Approved by SBX5065BLOCK YY-MM-DD YY-MM-DD Size: Rev: Sheet: of Title:MODEL: COMPANY: ALCO Electronics Limited Date: Data:Date: Drawn:Checked: Approved: LAST SAVED DATE: 1.0 Friday, July 05, 2013 55 Custom YY-MM-DD Drawn by Checked by Approved by SBX5065BLOCK YY-MM-DD YY-MM-DD Size: Rev: Sheet: of Title:MODEL: COMPANY: ALCO Electronics Limited Date: Data:Date: Drawn:Checked: Approved: LAST SAVED DATE: 1.0 Friday, July 05, 2013 55 Custom YY-MM-DD Drawn by Checked by Approved by SBX5065BLOCK YY-MM-DD YY-MM-DD ALCO SBX5065 +HDMI-IN-1.4 (300W) BLOCK DIAGRAMWITH HD-AUDIO V1.3A RECEUVER HDMI SIGNAL HDMI SIGNAL UART BUS/RESET VCC+27.5V P+12VSTB5V P+5V DDC HPDTMX POWER SUPPLY AMP SIGNAL VALUE STB-CT RX/TX CSRA671XXXXX DOWN LOAD /SD LR LINE-IN AUX-IN LR FLASH 8M HDMI-IN-1 OUTPUT OPT-IN HDMI DIGITAL-IN SOCKET LPC1114 MCU FR TAS5352 DIGITAL AMP PT6315 VFD DRIVER IR VFD DISPLAY KEY VFD-DATA FL TX 2.4G DIGITAL wireless STREAMING VIDEO BOX I2C_DATA/CLK 2-CHANNEL INPUT EP92A2E EP-HDMI 1.4 MFB/LED DIGITAL-OUT TX/RX RX 2.4G DIGITAL wireless SUB TAS5611 DIGITAL AMP VCC+32V P+12V STB5V POWER SUPPLY VCC+27.5V DC-JACK STB-VCC-CT Bluetooth KEY FR/FL 18.432MHz 20.25MHz 12MHz 16MHz 2402MHz -2480MHz 2404.5MHz - 2479.5MHz 16MHz NFC Antenna 13.56MHz 16MbitFLASH Bluetooth Module WL 38 04 16MHz Antenna MatchingNetwork WLIS3804 Bluetooth Radio 16MbitFLASH 2.4GHz Wireless Module 16MHz A7125 2.4GHz FSKTransceiver I2S Audio Interface XL9618 2404.5MHz -2479.5MHz

INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (External) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (External) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (External) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (External)

INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal) INTERTEK TESTING SERVICE Report No.: 13060108HKG-001 FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU Equipment Photographs Model: SBX5065KU / SBX5065KC (Internal)

The Equipment Under Test (EUT) is a Soundstrip Sound Bar Speaker System. It can accept analog input sources (RCA aux-in and 3.5mm phone jack line-in), digital input source (TOSLINK optical and HDMI) and wireless Bluetooth device. The Bluetooth module in the EUT is operating in the frequency range from 2402MHz to 2480MHz (79 channels with 1MHz channel spacing). The EUT supports NFC function to connect the Bluetooth communication when it is touched with NFC enabled device. The audio signal is amplified and fed to the built-in stereo loudspeakers. The EUT can send audio data to the separate wireless subwoofer via a 2.4GHz wireless module. This 2.4GHz wireless module is operating in the frequency range from 2404.0MHz to 2479.0MHz (16 channels with 5MHz channel spacing). The EUT is powered by 27.5VDC from an AC/DC adaptor. The AC/DC adaptor can accept universal input voltage (100V-240VAC). The EUT is using non-adaptive frequency hopping as declared by applicant. The NFC tag in EUT is a passive data device, which is powered by RF field of external reader. For the Bluetooth Module: Antenna Type: Internal, integral Antenna Gain: 0dBi Nominal rated field strength: 99.1dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB For the 2.4GHz Wireless Module: Antenna Type: Internal, integral Antenna Gain: 0dBi Nominal rated field strength: 93.8 dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB Functional Description of Main Components: 1. Bluetooth Module (BM100) - U1 (WL3804) is 2.4GHz Bluetooth radio core - X1 (16MHz crystal) provides system clock for U1 - L1, LC1, C2, C5 are antenna matching network - U2 (24C32) is EEPROM for parameter setup - NU1 is passive NFC tag for Bluetooth pairing - BU101 is regulator for Bluetooth Module (BM100) 2. 2.4GHz Wireless Module (modular approval FCC ID: QEC-GWNO) - U1 (XL9618) is I2S audio interface - U6 (A7125) 2.4GHz FSK Transceiver - Y1 (16MHz crystal) provides system clock for U1 - L2 is antenna matching network 3. HDMI module - HIC1 (EP92A2E) is HDMI processor - HY1 (18.432MHz) provides system clock for HIC1 4. Main Module - U302 (CSRA671) is audio DSP - Y300 (20.25MHz crystal) is clock for audio DSP (U302) - IC301 (LPC1114) is system MCU - X301 (12MHz crystal) is clock for system MCU (IC301) - TU7 (TAS5352) is stereo audio power amplifier - AIC901 (511631) is VFD display driver Channel Frequency Table of Bluetooth Module 2.4GHz wirless module (channel table) Channel Frequency 1 2.404GHz 2 2.409GHz 3 2.414GHz 4 2.419GHz 5 2.424GHz 6 2.429GHz 7 2.434GHz 8 2.439GHz 9 2.444GHz 10 2.449GHz 11 2.454GHz 12 2.459GHz 13 2.464GHz 14 2.469GHz 15 2.494GHz 16 2.479GHz ©2008-2013 Gigawit Electronics Ltd. Version 1.01 Page 1 of 13 GWK5NO_SW_TX Datasheet GWK5NO_SW 2.4GHz Wireless Subwoofer Module 1. General Description GWK5NO_SW is the optimized module dedicated for the wireless subwoofer application, it balance well between the cost and performance by utilizing the fact of subwoofer limited frequency response bandwidth. The narrow bandwidth enables GWK5NO_SW to transmit enough redundant data to combat with the 2.4GHz interference thus maintain the good co-existence performance in the 2.4GHz ISM band. Inheriting from its GWK5 family, GWK5NO_SW features both good wireless performance and audio performance. GWK5NO_SW has good RF co-existence and robust link quality, can combat the most interference from the crowded 2.4G ISM band. GWK5NO_SW uses non-compression PCM signal and 24bit high precision thus delivering very low THD audio. By adopting advance forward error correction and error concealment algorithm, GWK5NO_SW can reach <20ms latency, this makes it ideal for the Video synchronization, Home Theater applications. GWK5NO_SW is ideal for the subwoofer application not only by its competitive cost, but also by its flexibility for customized functions. The SW crossover frequency can be adjusted easily by the digital filter, and the general purpose I2C can be used to control customer peripheral unit to eliminate an extra microcontroller. 2. Applications  5.1 Subwoofer Speaker  2.1 Subwoofer Speaker  Soundbar Subwoofer  DVD 3. Features  2.4GHz AFH Solution  24bit high precision digital audio，SNR>115dB  Optimized for subwoofer application, 20~250Hz bandwidth  Co-existence: small foot-print(2MHz bandwidth) enabling better 2.4GHz co-existence  Low Power: TX: 36mA/3.3V @ -3dBm RF Output  RF Range: 15m+ indoor  Pairing function to support multi TX/RX operating simultaneously  Optional I2S digital audio interface support most audio ADCs and DACs  Power management function and control for green power policy  General purpose I2C for digital amplifier control  Flexible design, custom functions supported ©2008-2013 Gigawit Electronics Ltd. Version 1.01 Page 2 of 13 GWK5NO_SW_TX Datasheet 4. Electrical Specification Description Min/Typical/Max General Supply voltage TX:3.3V Supply current TX: 36mA Operation temperature -10 ~ +60°C RF RF Frequency 2400 ~ 2483MHZ Modulation GFSK Data rate 2M bps TX Power -3dBm RX Sensitivity -90dBm RF Channels 16 RF Range 15m+ indoor Output/input gain 1:1 Frequency response 20Hz ~ 600Hz (-3dB) Latency 20ms S/N ratio 115dB THD < 0.01% @ 100Hz Dynamic range 90dB Table [1]: Electrical Specification ©2008-2013 Gigawit Electronics Ltd. Version 1.01 Page 3 of 13 GWK5NO_SW_TX Datasheet 5. GWK5NO_SW Pin Assignment Pin # Pin name Type Description 1 GND P Ground 2 3.3V P +3.3V Power Input 3 MFB I/O Power or pairing key input, press long than 3s to turn on or off the module, press long than 10s to enter pairing mode. 4 LED I/O Status LED output 5 MCLK O I2S Master Clock Output, NC when I2S is in slave mode 6 I2SMOSI I/O I2S Data Master Output / Slave Input 7 I2SMISO I/O I2S Data Master Input / Slave Output 8 SCLK I/O I2S Bit Clock Input / Output 9 LRCK I/O I2S Left and Right Clock Input / Output 10 SDA /STANDBY I/O I2C Data or Standby Control, firmware configurable. For Standby mode, A high level will be a…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU MPE Analysis Report The Equipment Under Test (EUT) is a Soundstrip Sound Bar Speaker System. It can accept analog input sources (RCA aux-in and 3.5mm phone jack line-in), digital input source (TOSLINK optical and HDMI) and wireless Bluetooth device. The Bluetooth module in the EUT is operating in the frequency range from 2402MHz to 2480MHz (79 channels with 1MHz channel spacing). The EUT supports NFC function to connect the Bluetooth communication when it is touched with NFC enabled device. The audio signal is amplified and fed to the built-in stereo loudspeakers. The EUT can send audio data to the separate wireless subwoofer via a 2.4GHz wireless module. This 2.4GHz wireless module is operating in the frequency range from 2404.0MHz to 2479.0MHz (16 channels with 5MHz channel spacing). The EUT is powered by 27.5VDC from an AC/DC adaptor. The AC/DC adaptor can accept universal input voltage (100V-240VAC). The EUT is using non-adaptive frequency hopping as declared by applicant. The NFC tag in EUT is a passive data device, which is powered by RF field of external reader. For the Bluetooth Module: Antenna Type: Internal, integral Antenna Gain: 0dBi Nominal rated field strength: 99.1dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB For the 2.4GHz Wireless Module: Antenna Type: Internal, integral Antenna Gain: 0dBi Nominal rated field strength: 93.8 dBμV/m at 3m Maximum allowed field strength of production tolerance: +/- 3dB For Maximum Permissible Exposure (MPE) evaluation of the Soundstrip Sound Bar Speaker System (Model: SBX5065KU), the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65. 1) For the Bluetooth portion of Soundstrip Sound Bar Speaker System (Model: SBX5065KU), maximum field strength measured (FS) was 102.1 dBμV/m. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = (FS*D)^2 / 30 = 4.87 mW The radiated (EIRP) source-based time-averaging output power = (4.87 * 1) mW = 4.87 mW The power density at 20 cm from the antenna = EIRP / 4πR^2 = 0.00097 mW cm-2 INTERTEK TESTING SERVICE FCC ID: A2HSBX5065KU IC: 9903A-SBX5065KU 2) For the 2.4GHz Wireless Module portion of Soundstrip Sound Bar Speaker System (Model: SBX5065KU), maximum field strength measured (FS) was 96.8 dBμV/m. The distance (D) between the antenna and the equipment under test (EUT) was 3 meters. And the maximum source-based time-averaging duty factor is 100%. From these data, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The radiated power = (FS*D)^2 / 30 = 1.44 mW The radiated (EIRP) source-based time-averaging output power = (1.44 * 1) mW = 1.44 mW The power density at 20 cm from the antenna = EIRP / 4πR^2 = 0.00029 mW cm-2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the Soundstrip Sound Bar Speaker System at least 20cm from nearby persons.” In addition, for this multiple transmitter and antenna (Both Bluetooth & 2.4GHz wireless module portion), the requirement of Simultaneous Transmission evaluation has also been considered and has complied with the following conditions of the worse case; MPE1/Limit1 + MPE2/Limit2 ≤ 1 Thus, 0.00097/1 (Bluetooth Module) + 0.00029/1 (2.4GHz Wireless Module) = 0.000126 It is concluded that no Simultaneous Transmission evaluation is required.

55 44 33 22 11 D D C C B B A A BOOT MODE L P2_4 EEPROM SDA H APPLICATION EEPROM SCL EAN L: EXT FLASH, H: INT ROMP1_6P2_7 H REV P2_0 PLAY/PAUSE P0_2 GPIO vs. DEFAULT APP FUNCTION BUZZER DRIVER (*OPTIONAL) P1_3 BASEBAND(IBDK MODE) FWD H GPIO FUNCTION CONFIGURATION TABLE P0_1P3_5 LL VOL- P1_2 MODE VOL+ P0_5 ACX EEPROM24C32 EEPROM size depends on the need of voice prompt(>= 24C32) XO_P P20 P27 MFB LED2 VCOM AOHPM LED1P05 SPKL P02 P01 HCI_RXD XO_N SPKR P16 HCI_TXD P00 SDASDASCLSCL P30P20P00P04 GNDBK_OUTSK1/P35SYS_PWR P30 P04 P35 AIRAILRST_NADAP_INBAT_IN SPKLAOHPMCODEC_VDDGND LED2LED1MFBP16P01HCI_RXDHCI_TXDP05P27P02GND ANT1 SK1/P35 SK1 P35GND P03 AIRAIL RST_N SCL SDA SK1 P03 SPKR 1V8 CODEC_VDD BK_OUT BK_OUT VDD_IO 1V8 1V8 VDD_IO VDD_IO CODEC_VDD ADAP_IN VDD_IO VDD_IO SYS_PWR BAT_IN 1V8 SYS_PWR Board Name Size Title Rev Date: Sheet of P/N WLINK TECHNOLOGY LTD. WLIS04_SM_V1 A WL3804 ADD. No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan TEL. 886-3-5778385Design By :Shawn Chow Custom 11 Monday, April 15, 2013 001 Board Name Size Title Rev Date: Sheet of P/N WLINK TECHNOLOGY LTD. WLIS04_SM_V1 A WL3804 ADD. No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan TEL. 886-3-5778385Design By :Shawn Chow Custom 11 Monday, April 15, 2013 001 Board Name Size Title Rev Date: Sheet of P/N WLINK TECHNOLOGY LTD. WLIS04_SM_V1 A WL3804 ADD. No.46, Aly. 108-3 , Ln. 445 , Sec. 2, Meishi Rd., Yangmei City, Taoyuan County 326, Taiwan TEL. 886-3-5778385Design By :Shawn Chow Custom 11 Monday, April 15, 2013 001 TP1RF-TP1TP1RF-TP1 C50.75p/50VC50.75p/50V L1 1.8nH L1 1.8nH C1610u/16VC1610u/16V C111u/6.3VC111u/6.3V C2 1.5p/50V C2 1.5p/50V C12 10u/16V C12 10u/16V R41RR41R 1 2 L2L22uHL2L22uH C4 NP-0402 C4 NP-0402 X1X4P-16MHZX1X4P-16MHZ 41 32 C200.1u/16VC200.1u/16V J1WLIS01_SM_V1.0 <Package> J1WLIS01_SM_V1.0 <Package> SPKR 5 AOHPM 6 SPKL 7 P30 1 CODEC_VIN 8 P04 4 P00 3 P20 2 GND1 9 MIC_P1 10 MIC_N1 11 MIC_BIAS 12 AIR 13 AIL 14 RST_N 15 ADAP_IN 17 GND2 16 BAT_IN 18 SYS_PWR 19 SK1/P35 20 BKOUT 21 GND3 22 MFB 23 LED1 24 LED2 25 P02 26 P27 27 P05 28 HCI_TXD 29 HCI_RXD 30 P03 33 P01 32 P16 31 GND4 34 C71u/6.3VC71u/6.3V C14 1u/6.3V C14 1u/6.3V LC11.5nHLC11.5nH U2ACE24C32U2ACE24C32 A0 1 A1 2 A2 3 GND 4 SDA 5 SCL 6 WP 7 VCC 8 R74K7R74K7 12 R10R10 12 ANT1ANT-MP8ANT1ANT-MP8 1 C13 1u/6.3V C13 1u/6.3V R31KR31K 12 C8 10p/50V C8 10p/50V R8NP-0402R8NP-0402 C10 NP-0402 C10 NP-0402 C3NP-0402C3NP-0402 R51RR51R 1 2 R90R90 1 2 WLIS3804 U1WL3804-305 WLIS3804 U1WL3804-305 VDDAO 1 AOHPM 2 VSSAO 3 AOHPL 4 VDDA 5 VSSA 6 VCOM 7 AIR 8 AIL 9 NC1 10 VDD_IO1 12 RST_N 13 P1_2 14 P1_3 15 CODEC_VO 18 3V1_IN 19 ADAP_IN 20 BAT_IN 21 SAR_VDD 23 SYS_PWR 24 BK_VDD 25 BK_LX 26 XO_N 42 XO_P 41 VDD_IO2 40 HCI_RXD 38 HCI_TXD 37 1V8A 16 P0_5 36 P0_2 34 P2_4 32 LED2 31 LED1 30 MFB 29 BK_OUT 28 AOHPR 56 1V8B 55 EAN 54 VDD_IO3 52 P0_0 50 P2_0 49 P3_0 48 P0_3 47 P0_1 46 RTX 45 VCC_RF 43 P3_5 53 P2_7 35 3V1_O 17 GND 57 NC2 11 SK1 22 P1_6 39 RX_CLS1 44 P0_4 51 P2_2 33 BK_GND 27 C19 10u/16V C19 10u/16V C1510u/16VC1510u/16V C60.1u/16VC60.1u/16V C21 1u/6.3V C21 1u/6.3V C171u/6.3VC171u/6.3V R61KR61K 12 C910p/50VC910p/50V C181u/6.3VC181u/6.3V C10.1u/16VC10.1u/16V WLINK TECHNOLOGY LTD.

1 1 2 2 3 3 4 4 DD CC BB AA ** GWK5NO_TX * 2013/7/4 Title: Size: Date: Revision: Sheet:of A4 Cannot open file E:\K4x\template\logonew.jpg Gigawit Electronics Ltd., All Rights Reserved. Designed By:Checked By: 17:21:27 Jeff* Approved By: * 3.3VIN C18 10uF/10V/X7R RF C11 NC ANT1 C13 NC L2 2.7nH C10 10uF/10V/X7R R6 10K VCC33 RSTN 1 2 3 4 6 5 RM1 RFM_K5NO I2SSCLK I2SLRCK I2SMCLK I2SMOSITXD RXD BLED SDA SCL ADCKEY I2SMISO 3.3VIN RSTN MFB GPIO8 GPIO2 GPIO3 GPIO5 GPIO4 1 2 3 4 5 6 7 8 9 10 11 1213 23 22 21 20 19 18 17 16 15 14 24 J1 Header 12X2 PIANT101PIANT102 COANT1 PIC1001 PIC1002 COC10 PIC1101 PIC1102 COC11 PIC1301 PIC1302 COC13 PIC1801 PIC1802 COC18 PIJ101 PIJ102 PIJ103 PIJ104 PIJ105 PIJ106 PIJ107 PIJ108 PIJ109 PIJ1010 PIJ1011 PIJ1012PIJ1013 PIJ1014 PIJ1015 PIJ1016 PIJ1017 PIJ1018 PIJ1019 PIJ1020 PIJ1021 PIJ1022 PIJ1023 PIJ1024 COJ1 PIL201PIL202 COL2 PIR601 PIR602 COR6 PIRM101 PIRM102 PIRM103 PIRM104 PIRM105 PIRM106 CORM1 1 1 2 2 3 3 4 4 DD CC BB AA ** RF_A7125 * 2013/7/4 Title: Size: Date: Revision: Sheet:of A4 Cannot open file E:\K4x\template\logonew.jpg Gigawit Electronics Ltd., All Rights Reserved. Designed By:Checked By: 17:21:27 Jeff* Approved By: * BP_RSSI 1 BP_BG 2 RFI 3 RFO 4 RFC 5 V D D _ V C O 6 C P 7 V D D _ P L L 8 X I 9 X O 1 0 SCS 11 SCK 12 VDD_D 13 SDIO 14 GND 15 G I O 1 1 6 G I O 2 1 7 C K O 1 8 R E G I 1 9 V D D _ A 2 0 PAD 0 U6 A7125 C37 2.2pF C40 1nF/NPO C39 100pF/NPO C38 4.7uF/10V/X7R C46 100pF/NPO C45 0.1uF/X7R C48 0.1uF/X7R C44 100pF/NPO C36 4.7uF/10V/X7R C42 3.9pF/NPO L12 1.8nH L11 2.7nH R14 2.7K C47 180pF/NPO C49 2.2nF SPICSN SPISCK VDD_A VDD_A VDD_A SPISDO 3.3VRF3.3VRF SPISDI RFGIO2 OSCOUT C55 1nF/NPO C57 10pF/NPO RFOSC VDDA Output Internal digal circuit LDO decoupler C41 4.7uF/10V/X7R C24 NC C28 1.2pF/NPO C29 1.2pF/NPO L7 2.7nH L6 2.2nH RF R15 NC PIC2401 PIC2402 COC24 PIC2801 PIC2802 COC28 PIC2901 PIC2902 COC29 PIC3601 PIC3602 COC36 PIC3701 PIC3702 COC37 PIC3801 PIC3802 COC38 PIC3901 PIC3902 COC39 PIC4001 PIC4002 COC40 PIC4101 PIC4102 COC41 PIC4201PIC4202 COC42 PIC4401 PIC4402 COC44 PIC4501 PIC4502 COC45 PIC4601 PIC4602 COC46 PIC4701 PIC4702 COC47 PIC4801 PIC4802 COC48 PIC4901 PIC4902 COC49 PIC5501PIC5502 COC55 PIC5701PIC5702 COC57 PIL601PIL602 COL6 PIL701PIL702 COL7 PIL1101 PIL1102 COL11 PIL1201 PIL1202 COL12 PIR1401 PIR1402 COR14 PIR1501 PIR1502 COR15 PIU600 PIU601 PIU602 PIU603 PIU604 PIU605 PIU606PIU607PIU608PIU609PIU6010 PIU6011 PIU6012 PIU6013 PIU6014 PIU6015 PIU6016PIU6017PIU6018PIU6019PIU6020 COU6 1 1 2 2 3 3 4 4 DD CC BB AA ** XL9618 * 2013/7/4 Title: Size: Date: Revision: Sheet:of A4 Cannot open file E:\K4x\template\logonew.jpg Gigawit Electronics Ltd., All Rights Reserved. Designed By:Checked By: 17:21:27 Jeff* Approved By: * TXD SCL SDARLED BLED P W R E N RSTN VCC33 SPICSN VCC33 C1 4.7uF/10V/X7R C2 1nF/NPO SPISDI SPISCK C3 1 0 u F / 1 0 V / X 7 R 1 2 3 4 5 6 7 8 9 10 11 12 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 25 26 27 28 29 30 31 32 33 34 35 36 3 7 3 8 3 9 4 0 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 U1 XL9618 I2SSCLK A D C K E Y G P I O 6 M F B A D C B A T I 2 S M C L K I2SMOSI I2SMISO GPIO5 RFCKO G P I O 7 RXD RFGIO2 PA_PWM GPIO4 G P I O 1 SPISDO IRKEY T X _ R X N T X N _ R X G P I O 2 G P I O 3 I2SLRCK G P I O 0 R2 2R2 R1 2R2 VCC33 3.3VRF 3.3VIN GPIO8 I 2 S L R C K P L L _ P W M PWM Assignment PWM0 - Clock PLL PWM1 - PA PWM2 - MCLK PWM3 - LRCK PWM4 - Unused PWM5 - LED1 PWM6 - Capture for LRCK in I2S Slave PWM7 - LED0 A N S W 0 A N S W 1 I 2 S L R C K C5 8.2pF/NPO OSCOUT R3 10K C4 1uF R4 100K 1 2 D1 KDV202E-B C6 330pF X1 1 G 2 G 4 X2 3 Y1 16MHz/10ppm/9pF PIC101 PIC102 COC1 PIC201 PIC202 COC2 PIC301 PIC302 COC3 PIC401 PIC402 COC4 PIC501 PIC502 COC5 PIC601PIC602 COC6 PID101 PID102 COD1 PIR101PIR102 COR1 PIR201PIR202 COR2 PIR301 PIR302 COR3 PIR401PIR402 COR4 PIU101 PIU102 PIU103 PIU104 PIU105 PIU106 PIU107 PIU108 PIU109 PIU1010 PIU1011 PIU1012 PIU1013PIU1014PIU1015PIU1016PIU1017PIU1018PIU1019PIU1020PIU1021PIU1022PIU1023PIU1024 PIU1025 PIU1026 PIU1027 PIU1028 PIU1029 PIU1030 PIU1031 PIU1032 PIU1033 PIU1034 PIU1035 PIU1036 PIU1037PIU1038PIU1039PIU1040PIU1041PIU1042PIU1043PIU1044PIU1045PIU1046PIU1047PIU1048 COU1 PIY101 PIY102 PIY103 PIY104 COY1

ALCO CONFIDENTIAL 5 5 4 4 3 3 2 2 1 1 DD CC BB AA MAP-RESET AUX2-L AUX2-R AUX1-LAUX1-R RESTN I2SSDIN I2SLRCLK I2SSCLK RESTN W-RXD W-TXD AUX1-R AUX2-L LFE_A AUX2-R LFE_B AUX1-L VALID DM DP DPDM I2SSDIN I2SLRCLK I2SSCLK SUB-OUT+ SUB-OUT+ SUB-OUT- SUB-OUT- 3V3-AUD 3.3VD 3V3-AUD1 3V3-VDD 1V 1V-VDD 3.3V 3V3-VDD 3.3V 3.3V 3.3V P+5V GND GND P+5V GND GND GND GNDGND P+5V wireless+3.3vcc wireless+3.3vcc 3.3VD 3.3VD 3V3-VDD 3V3-VDD 3V3-AUD1 3V3-AUD 3V3-AUD 1V-VDD 1V-VDD 1V-VDD 1V-VDD1V-VDD 1V-VDD 1V-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD3V3-VDD3V3-VDD3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD 3V3-VDD USB+5V USB+5V 3V3-AUD1 GND USB+5V GND GND GNDGND /SD2,4 HDMI_SPDIF4 MAP-RESET2 MFB2 LED2 BT-L-IN 4 BT-R-IN 4 I2C-CLK 2 I2C-DATA 2 VALID2,4 LEFT_B4 LEFT_A4 RIGHT_B4 RIGHT_A4 Title SizeDocument NumberRev Date:Sheet of ALCO ELECTRONICS LIMITED Audi Dsp , Wir…

Text truncated - open the document above for the full version.