A2HW10110.1 Inches Windows Tablet

Equipment tested forcompliance as acomplete unit WT19303W87 Turning on your tablet for the first time Tablet docking P r e s s a n d h o l d t h e P ow e r b u t t o n 4 ~ 5 seconds until the RCA logo appears. Select the region and language, then tap and follow the onscreen instructions to setup the tablet. Be sure your home Wi-Fi network is turned on and connected to the internet.To wall outlet NOTEThe keyboard connects to the tablet via the Connector. When the connection is successful, the tablet willautomatically adjust its settings to use the keyboard.Remove tablet from keyboard Power off the tablet Turn on the tablet in standby mode Press the Power button to turn on the tablet screen. Swipe up the lock screen fromthe bottom edge of the display. Sleep / Standby mode Press the Power button to turn off the tablet screen. You can shut down your tablet by doing either of the following: a. If your tablet is unresponsive, Press and hold the Power button until the message " Slide to shut down you PC" appears. b. Slide to the bottom edge of the display, then the tablet will be completely powered off. Tap Settings from the Charms bar, then tap Power and select Shut down to do a normal shutdown. Volume +/- ConnectorUse to connect the tablet to keyboard.Touch padKeys There are two ways to dock the tablet onto the keyboard. or Quick Start Guide Getting To Know Your Tablet Windows buttonPress to open/closethe Windows Startscreen. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the li mits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against har mful interference in a residential installatio n. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the i nstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not oc cur in a particular installation. If this equipment does cause harm ful interference to radio or television reception, which can be determined by turning the equipment off and o n, the user is encouraged to try to correct the interference by one or more of the following measures:s Reorient or relocate the receiving antenna. s Increase the separation between the equipment and receiver. s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. s Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-0902) could void the user’s authority to operate the equipment. CAN ICES-3(B) / NMB-3(B) Warning: the AC adapter is used as disconnect device and it should rema in readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC adap ter should be disconnected from the mains socket outlet compl etely. Some of the following information may not apply to your parti cular product; however, as with any electronic product, pre cautions should be observed during handling and use.s Read these instructions. s Keep these instructions. s Heed all warnings. s Follow all instructions. s Do not use this apparatus near water. s Clean only with dry cloth. s Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. s Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. s Protect the power cord from being walked on or pinched partic ularly at plugs, convenience receptacles, and the point whe re they exit from the apparatus. s Only use attachments / accessories specified by the manufacturer. s Unplug this apparatus during lightning storms or when unused for long periods of time. s Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spille d or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONSADDITIONAL SAFETY INFORMATIONs The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. s Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. s Do not place lighted candles, cigarettes, cigars, etc. on the product. s Care should be taken so that objects do not fall into the product. s Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. s To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. s Do not play your headset at high volume. Hearing experts warn against extended high-volume play. Copyright and Trademark NoticesIntel Inside logo is trademarks of Intel Corporation in the U.S. and /or other countries, Copyright Intel Corporation, 2015. All rights reserved. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names are those of their respective owners. About HDMIHigh-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed hig…

Text truncated - open the document above for the full version.

Equipment tested for compliance as a complete unit This de vice complies with Par t 15 of the FCC Rules. Operation is subject to the following tw o conditions: (1) This de vice may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no t occur in a particular installation. If this equipment does cause harm ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver . • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance (MLB International Inc., PO Box 1214, Lockport, NY, 14095, Tel: 716-240-0902) could void the user’s authority to operate the equipment. CAN ICES-3(B) / NMB-3(B) W101 Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the mains plug from mains completely, the AC adapter should be disconnected from the mains socke t outlet completely. Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all war nings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dr y cloth. • Do not block an y ventilation openings. Install in accordance with the manuf acturer’s instructions. • Do not install near an y heat sources such as radiators, heat registers, stoves , or other apparatus (including amplifi ers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specifi ed by the manufacturer. • Unplug this apparatus during lightning storms or when un used for long periods of time. • Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in an y way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the appa ratus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus. • Always leave suffi cient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air fl ow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. • To prevent the risk of fi re or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. Copyright and Trademark Notices Intel Inside logo is tr ademarks of Intel Corporation in the U.S . and /or other countries, Copyr ight Intel Corporation, 2015. All rights reserved. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. The Bluetooth ® word mark and logos are registered tr ademarks owned by the Bluetooth SIG Inc. Other tr ademarks and tr ade names are those of their respective owners. About HDMI High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can tr ansmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audio output. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are tr ademarks or registered tr ademarks of HDMI Licensing LLC in the United States and other countries. All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice . Turning on your tablet for the fi rst time Tablet docking Press and hold the P ower button 4~5 seconds until the RCA logo appears. Select the region and language, then tap and follow the onscreen instructions to setup the tablet. Be sure your home Wi-Fi networ k is turned on and connected to the internet. To wall outlet NOTE The keyboard connects to the tablet via the Connector. When the connection is successful, the tablet will automatically adjust its settings to use the keyboard. Remove tablet fr om ke yboard Power off the tablet Turn on the tablet in standby mode Press the Power button to turn on the tablet screen. Swipe up the lock screen from the bottom edge of the display. Sleep / Standby mode Press the Power button…

Text truncated - open the document above for the full version.

Electronics Limited A member of the ALCO group 11/F Zung Fu Industrial Building,1067 King’s Road, Quarry Bay, Hong Kong Tel: (852) 2562 6121, Fax: (852) 2597 5201 , (852) 2811 1056 Letter of Agency "I, an officer of Alco Electronics Ltd., do hereby authorize Intertek Testing Services (Mr. Terry Chan / Koo Wai Ip / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Dated this 2 nd day of March, 2015 By _____________ ____ Signature _ Peggy Suen_____ _ ____ Printed Name _ Secretary, Engineering Dept. __ Title Remark: The person who signs this authorization letter must be the grantee contact of record in the Grantee Code data base.

Electronics Limited A member of the ALCO group 11/F Zung Fu Industrial Building,1067 King’s Road, Quarry Bay, Hong Kong Tel: (852) 2562 6121, Fax: (852) 2597 5201 , (852) 2811 1056 Atte ntion: Application Examiner Re: Request for confidentiality Applicant: Alco Electronics Ltd. FCC ID: A2HW101 T o whom it may concern, Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by Alco Electronics Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: [Select one or more of items below, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Short-term Confidentiality [Complete this section if short-term confidentiality is requested] Request is hereby submitted by Alco Electronics Ltd. to withhold from public review for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: [Select one or more of items below that are not selected in the list above, as appropriate] • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description • Test setup photos • External photos • Internal photos • User manual Rationale for request for confidentiality: Alco Electronics Ltd. has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.][Short term confidentiality: Disclosure of the short term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] [For FCC certification; delete for TCB certification: The fee for confidentiality has been submitted along with the fee for certification.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] Secretary, Engineering Dept. [Title] Alco Electronics Ltd. [Company name] Peggy Suen

INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (External)

‘VENTURER / WT19303W87’ Date : 18-05-2015 MODEL / MODÈLE: WT19303W87DC / C.C. 5V 2.0A CAN ICES-3(B) / NMB-3(B)Made in China / Fabriqué en Chine SERIAL NO FCC ID: A2HW101IC: 9903A-W101

‘RCA / W101’ Date : 18-05-2015 MODEL / MODÈLE: W101 DC / C.C. 5V 2.0A FCC ID: A2HW101IC: 9903A-W101 CAN ICES-3(B) / NMB-3(B)Made in China / Fabriqué en Chine SERIAL NO

INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal)

INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal)

INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal) INTERTEK TESTING SERVICE Report No.: 15041543HKG-001 FCC ID: A2HW101 IC: 9903A-W101 Equipment Photographs Model: WT19303W87 (Internal)

Analysis Report Report No.: 15041543HKG-001 The Equipment Under Test (EUT) is a 10.1" Windows Tablet, equipped with keyboard, headphone, WiFi, Bluetooth, SD, HDMI and USB Interface. For WiFi, the EUT operates in a frequency range from 2412MHz to 2462MHz at 802.11b,g,n HT20 (11 channels with 5MHz spacing) while from 2422MHz to 2452MHz at 802.11n HT40 (7 channels with 5MHz channel spacing). For Bluetooth 3.0, the EUT occupies a frequency range from 2402MHz to 2480MHz (79 channels with channel spacing of 1MHz). For Bluetooth 4.0 BLE, the EUT occupies a frequency range from 2402MHz to 2480MHz (40 channels with channel spacing of 2MHz). The EUT is powered by an external AC/DC adaptor (5VDC output) or/and internal 3.7VDC (2x 3.7V rechargeable battery). The adaptor accepts 100- 240VAC. WiFi 802.11b, 802.11g, 802.11n (HT20): 2412MHz – 2462MHz, 11 channels, 5MHz spacing WiFi 802.11n (HT40): 2422MHz – 2452MHz, 7 channels, 5MHz spacing Bluetooth 3.0: 2402MHz – 2480MHz, 79 channels, 1MHz spacing Bluetooth 4.0 BLE: 2402MHz – 2480MHz, 40 channels, 2MHz spacing Antenna Type: Internal integral antenna Antenna Gain: 0dBi Operating mode Nominal Production Modulation Radiated Tolerance Type Field Strength 802.11b 98.6 dBμV/m at 3m +2/-3dB DSSS 802.11g 98.4 dBμV/m at 3m +2/-3dB OFDM 802.11n (HT20) 97.8 dBμV/m at 3m +2/-3dB MCSn (n=1 to 7) 802.11n (HT40) 97.4 dBμV/m at 3m +2/-3dB MCSn (n=1 to 7) Bluetooth 3.0 89.8 dBμV/m at 3m +2/-3dB GFSK Bluetooth 4.0 BLE 90.8 dBμV/m at 3m +2/-3dB GFSK According to the KDB 447498: For WiFi: Based on the Maximum allowed field strength of production tolerance was 100.6dBμV/m at 3m in frequency 2.462GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 3.44mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 3.44mW. The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.462) mW = 9.56 mW For Bluetooth: Based on the Maximum allowed field strength of production tolerance was 92.8dBμV/m at 3m in frequency 2.480GHz, thus; The EIRP = [(FS*D) ^2*1000 / 30] = 0.57mW Conducted power = Radiated Power (EIRP) – Antenna Gain So; Conducted Power = 0.57mW. The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.53 mW Since the above conducted output power is well below the SAR Exclusion threshold level, so the EUT is considered to comply with SAR requirement without testing. Simultaneous Transmission SAR exclusion considerations Since the WiFi and Bluetooth transmitters of this device may operate simultaneously, simultaneous transmission analysis is required. Per KDB 447498, simultaneous transmission SAR test exclusion can be applied when the sum of 1-g SAR of all simultaneously transmitting antennas in an operating mode and exposure condition combination is within the SAR limit ( ≤ 1.6W/kg). When the standalone SAR test exclusion is applied, the standalone 1-g SAR must be estimated according to the following equation, Estimated SAR = )max/()5.7/)((TDPxGHzF where F(GHz) is the RF channel transmit frequency in GHz Pmax is the max. power of channel, including tune-up tolerance, mW TD is the min. test separation distance, mm For WiFi operation, Maximum Time-averaged Conducted Power of this device = 3.44 mW Therefore, the Estimated SAR will be determined as follow, Estimated SAR = )max/()5.7/)((TDPxGHzF = 0.1 4 W/kg where Pmax = 3.44 mW, TD = 5 mm and F(GHz) = 2.462 GHz For Bluetooth operation, Maximum Time-averaged Conducted Power of this device = 0.57 mW Therefore, the Estimated SAR will be determined as follow, Estimated SAR = )max/()5.7/)((TDPxGHzF = 0.02 W/kg where Pmax = 0.57mW, TD = 5 mm and F(GHz) = 2.480 GHz Simultaneous Transmission Analysis WiFi SAR (W/kg ) Blueto oth SAR (W/kg) Σ ΣΣ Σ SAR (W/kg) Simultaneous SAR Required 0.14 0.02 0.16 No Conclusion Since the above summed SAR result for all simultaneous transmission conditions were below the SAR limit (1.6 W/kg), SAR evaluation for simultaneous transmission configuration are not required.

- Intertek's standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report No.: 15041543HKG-001 Alco Electronics Ltd Application For Certification (Original Grant) (FCC ID: A2HW101) (IC: 9903A-W101) Transceiver Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Chan Chi Hung, Terry Senior Supervisor Date: May 28, 2015 INTERTEK TESTING SERVICES Report No.: 15041543HKG-001 i FCC ID: A2HW101 IC: 9903A-W101 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Grantee: Alco Electronics Ltd Grantee Address: 11/F., Zung Fu Industrial Building, 1067 King’s Road, Quarry Bay, Hong Kong. Contact Person: Peggy Suen Tel: (852) 2562 6121 Fax: (852) 2597 5201 e-mail: [email protected] Manufacturer: Alco Electronics (Dongguan) Limited Manufacturer Address: Gong Ye Xi Road, Houjie Technology Industrial Park, Houjie, Dongguan, Guangdong P.R.C. 523960 China Brand Name: VENTURER / RCA Model: WT19303W87 / W101 Type of EUT: Transceiver Description of EUT: 10.1" Windows Tablet Serial Number: N/A FCC ID / IC: A2HW101 / 9903A-W101 Date of Sample Submitted: April 27, 2015 Date of Test: April 27, 2015 to May 14, 2015 Report No.: 15041543HKG-001 Report Date: May 28, 2015 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Report No.: 15041543HKG-001 ii FCC ID: A2HW101 IC: 9903A-W101 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com SUMMARY OF TEST RESULT TEST SPECIFICATION REFERENCE RESULTS Transmitter Power Line Conducted Emissions 15.207 / RSS-Gen 8.8 Pass Radiated Emission Radiated Emission on the Bandedge 15.249, 15.209 / RSS-210 A2.9, RSS-210 2.5 Pass Radiated Emission in Restricted Bands 15.205 / RSS-210 2.2 Pass The equipment under test is found to be complying with the following standards: FCC Part 15, October 1, 2013 Edition RSS-210 Issue 8, December 2010 RSS-Gen Issue 4, December 2014 Note: 1. The EUT uses a permanently attached antenna which, in accordance to section 15.203, is considered sufficient to comply with the pervisions of this section. 2. Pursuant to FCC part 15 Section 15.215(c), the 20 dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. INTERTEK TESTING SERVICES Report No.: 15041543HKG-001 iii FCC ID: A2HW101 IC: 9903A-W101 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 General Description....................................................................................... 1 1.1 Product Description ...................................................................................... 1 1.2 Related Submittal(s) Grants .......................................................................... 1 1.3 Test Methodology ......................................................................................... 2 1.4 Test Facility .................................................................................................. 2 2.0 System Test Configuration ............................................................................ 3 2.1 Justification................................................................................................... 3 2.2 EUT Exercising Software .............................................................................. 4 2.3 Special Accessories...................................................................................... 4 2.4 Measurement Uncertainty ............................................................................. 4 2.5 Support Equipment List and Description........................................................ 4 3.0 Emission Results ........................................................................................... 5 3.1 Field Strength Calculation ............................................................................. 5 3.2 Radiated Emission Configuration Photograph ............................................... 6 3.3 Radiated Emission Data ............................................................................... 6 3.4 Conducted Emission Configuration Photog…

Text truncated - open the document above for the full version.