A3LSCHR920Cellular/AWS/PCS CDMA and AWS/PCS LTE Phone with WLAN and Bluetooth

User manual SCH-R90 Using this manual This user manual has been specially designed to guide you through the functions and features of your mobile phone. To get started quickly, refer to the sections “Introducing your mobile phone”, ”Assembling and preparing your mobile phone” and “Using basic functions”. Instructional icons Before you start, familiarise yourself with the icons you will see in this manual: Warning—situations that could cause injury to yourself or others Caution—situations that could cause damage to your phone or other equipment Note—notes, usage tips, or additional information X Refer to—pages with related information; for example: X p. 12 (represents “see page 12”) Õ Followed by—the order of options or menus you must select to perform a step; for example: In Menu mode, select Messages Õ Create new message (represents Messages, followed by Create new message) [ ] Square brackets—phone keys; for example: [] (represents the Power/ Menu exit key) < > Angled brackets—softkeys that control different functions at each screen; for example: <OK> (represents the OK softkey) Copyright information Rights to all technologies and products that comprise this device are the property of their respective owners: ® z Bluetooth is a registered trademark of the Bluetooth SIG, Inc. worldwide z Java™ is a trademark of Sun Microsystems, Inc. ® z Windows Media Player is a registered trademark of Microsoft Corporation. Contents Safety and usage information Safety warnings Safety precautions Important usage information Introducing your mobile phone Unpack Phone layout Keys Display Icons Assembling and preparing your mobile phone Install the USIM card and battery Charge the battery Using basic functions Turn your phone on and off Access menus Customize your phone Use basic call functions Send and view messages Add and find contacts Troubleshooting Safety and usage information Comply with the following precautions to avoid dangerous or illegal situations and ensure peak performance of your mobile phone. Safety warnings Keep your phone away from small children and pets Keep your phone and all accessories out of the reach of small children or animals. Small parts may cause choking or serious injury if swallowed. Protect your hearing Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Install mobile phones and equipment with caution Ensure that any mobile phones or related equipments installed in your vehicle are securely mounted. Avoid placing your phone and accessories near or in an air bag deployment area. Improperly installed wireless equipment can cause serious injury when air bags inflate rapidly. Handle and dispose of batteries and chargers with care z Use only Samsung-approved batteries and chargers specifically designed for your phone. Incompatible batteries and chargers can cause serious injuries or damage to your phone. z Never dispose of batteries or phones in a fire. Follow all local regulations when disposing used batteries or phones. z Never place batteries or phones on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. z Never crush or puncture the battery. Avoid exposing the battery to high external pressure, which can lead to an internal short circuit and overheating. Avoid interference with pacemakers Maintain a minimum distance of 15 cm (6 inches) between mobile phones and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your phone is interfering with a pacemaker or other medical device, turn off the phone immediately and c ontact the manufacturer of the pacemaker or medical device for guidance. Turn off the phone in potentially explosiv e environments Do not use your phone at refuelling points (service stations) or near fuels or chemicals. Turn off your phone whenever directed by warning signs or instructions. Your phone could cause explosions or fire in and around fuel or chemical storage and transfer areas or blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the phone, its parts, or accessories. Reduce the risk of repetitive motion injuries When sending text messages or playing games on your phone, hold the phone with a relaxed grip, press the keys lightly, use special features that reduce the number of keys you have to press (such as templates and predictive text), and take frequent breaks. Safety precautions Drive safely at all times Avoid using your phone while driving and obey all regulations that restrict the use of mobile phones while driving. Use hands-free accessories to increase your safety when possible. Follow all safety warnings and regulations Comply with any regulations that restrict the use of a mobile phone in a certain area. Use only Samsung-approved accessories Using incompatible accessories may damage your phone or cause injury. Turn off the phone near medical equipments Your phone can interfere with medical equipments in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel. Turn off the phone or disable the wireless functions when in an air craft Your phone can cause interference with aircraft equipment. Follow all airline regulations and turn off your phone or switch to a mode that disables the wireless functions when directed by airline personnel. Protect batteries and chargers from damage Avoid exposing batteries to very cold or very hot temperatures (below 0° C/32° F or above 45° C/ 113° F). Extreme temperatures can reduce the charging capacity and life of your batteries. Prevent batteries from contacting metal objects, as this can create a connection between the + …

Text truncated - open the document above for the full version.

To Whom It May Concern: We attest to the following for this application: 1. MPR is permanently implemented for all channel BWs, modulations, frequency bands and RB sizes: Supported channel BWs, modulations, frequency bands: a. LTE Band 2 & 4(Channel BW 1.4 & 3 & 5 MHz)/QPSK & 16QAM 2. MPR is implemented per 3GPP TS 36.101. With the MPR permanently implemented, this device will never operate at 23.5dBm or higher in QPSK and at 22.5dBm or higher in 16QAM. 3. We confirm the specific MPR targets and tolerances shown below November 18, 2011 A3LSCHR920 LTE Band 2 (PCS) Frequency [MHz] Uplink Channel Number BW [MHz] Modulation RB Size RB Offset Target Power [dBm] MPR Target MPR Allowed by 3GPP Low 1850.7 Mid 1880.0 High 1909.3 Low 18607 Mid 18900 High 19193 1.4 QPSK 1023+0.5 00 1523+0.5 00 3223+0.5 00 6022+0.5 10-1 16-QAM 1022+0.5 10-1 1522+0.5 10-1 3222+0.5 10-1 6021+0.5 20-2 Low 1851.5 Mid 1880.0 High 1908.5 Low 18615 Mid 18900 High 19185 3 QPSK 1023+0.5 00 11423+0.5 00 8422+0.5 10-1 15022+0.5 10-1 16-QAM 1022+0.5 10-1 11422+0.5 10-1 8421+0.5 20-2 15021+0.5 20-2 Low 1852.5 Mid 1880.0 High 1907.5 Low 18625 Mid 18900 High 19175 5 QPSK 1023+0.5 00 12423+0.5 00 126 22+0.5 10-1 25022+0.5 10-1 16-QAM 1022+0.5 10-1 12422+0.5 10-1 12621+0.5 20-2 25021+0.5 20-2 4. A-MPR was disabled for all SAR test samples for SAR testing purposes only. 5. This device does not implement power back-off schemes for SAR compliance. 6. We attest to the Simultaneous Tx listed on Operational Description to be accurate and furthermore, any other simultaneous Tx combinations not listed on the SAR report are not supported by software/hardware design. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Taekkyun Choi, Senior Engineer Samsung Electronics,. LTE Band 4 (AWS) Frequency [MHz] Uplink Channel Number BW [MHz] Modulation RB Size RB Offset Target Power [dBm] MPR Target MPR Allowed by 3GPP Low 1710.7 Mid 1732.5 High 1754.3 Low 19957 Mid 20175 High 20393 1.4 QPSK 1023+0.5 00 1523+0.5 00 3223+0.5 00 6022+0.5 10-1 16-QAM 1022+0.5 10-1 1522+0.5 10-1 3222+0.5 10-1 6021+0.5 20-2 Low 1711.5 Mid 1732.5 High 1753.5 Low 19965 Mid 20175 High 20385 3 QPSK 1023+0.5 00 11423+0.5 00 8422+0.5 10-1 15022+0.5 10-1 16-QAM 1022+0.5 10-1 11422+0.5 10-1 8421+0.5 20-2 15021+0.5 20-2 Low 1712.5 Mid 1732.5 High 1752.5 Low 19975 Mid 20175 High 20375 5 QPSK 1023+0.5 00 12423+0.5 00 12622+0.5 10-1 25022+0.5 10-1 16-QAM 1022+0.5 10-1 12422+0.5 10-1 12621+0.5 20-2 25021+0.5 20-2

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 18600 Broadwick St. Rancho Dominguez, CA 90220 Date: October 25, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, http Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: A3LSCHR920 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram 2 Operational Description 3 Schematics PERMANENT 4 Parts List & Tune-Up Procedure 5 External Photos 6 Internal Photos 7 Test-Setup Photos SHORT-TERM 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Peter Ra General Manager American QA Lab SAMSUNG Electronics America INC.

SAMSUNG ELECTRONICS CO., LTD 416,Maetan-3dong,Yeongtong-gu Suwon-si,Gyeonggi-do, 443-742 Korea October 25 Federal Communicat ions Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJ ECT : Label Stat ement FCC ID : A3LSCHR920 Gentlemen: We hereby provide the label statement letter f or the above-mentioned phone by a new label statement policy instituted at the September 12, 2006, TCB-FCC Teleconference. The label statement is as follows: The FCC ID shown in the FCC ID label page will be readily visible at the time of purchase because the phone will be marketed without the battery installed. This statement could not be included in the label. So we inform you of it through this letter. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Seoung Ho Park Senior Manager SAMSUNG ELECTRONICS CO.,LTD Telecommunication Network Business Mobile Communication Division Regulatory Compliance Group.

Date: November 18, 2011 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: SAMSUNG ELECTRONICS CO.,LTD. FCC ID: A3LSCHR920 Part 20.19 Certification To Whom It May Concern: The following are the model designations and their associated key features for this FCC ID, according to requirem ent in the TCB Guidance issued on June 20, 2008. We, Samsung Electronics, hereby declare the samples evaluated in this application are equivalent to production s amples. FCC ID: A3LSCHR920 Model(s): SCH-R920 Air Interfaces: CDMA, USPCS, EVDO Rev.0 Radio Services: CDMA, USPCS, EVDO Rev.0 GPS SMS Bluetooth, Wi-Fi Key Features: MP3 Player Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Taekkyun Choi Senior Engineer Samsung Electronics

FCC ID: A3LSCHR920 Applicant: Samsung Electronics Co., Ltd. Subject: LTE Checklist – in support of KDB 388624 for PBA submission The following information is submitted in accordance with FCC KDB 388624 for providing information related to the FCC ID: A3LSCHR920 LTE handset in this filing. The FCC ID: A3LSCHR920 is a portable handset that was tested according SAR test procedures described in KDB 941225 D05 for devices incorporating Long Term Evolution (LTE). No additional testing guidance was required for this device. The following checklist provides the device specifications used to evaluate the device. 1) 2) LowHigh 1850.71909.3 1851.51908.5 1852.51907.5 LowHigh 1710.71754.3 1711.51753.5 1712.51752.5 4)(a) 5) 6) 7) 8) RF Output Power (dBm) 11) 12) 13-15) 1750 MHz CDMA A3LSCHR920 1.4, 3, and 5 MHz BW See 3) Handset QPSK, 16QAM 2 1880 1880 See Section 18 of SAR Report 1 TX/RX Ant (Primary); 1 Rx Only Ant (Secondary) More details in Technical Descriptions Yes: Section 13 of SAR Report Yes Yes No See Section 15 of SAR Report See Section 18 of SAR Report Yes 1732.5 1732.5 1.4 MHz BW 3 MHz BW 1.4 MHz BW 3 MHz BW Band 2 FCC ID Form Factor Frequency Range of each LTE transmission band Channel Bandwidths KDB 941225 Pub LTE Information 2.4 GHz Bluetooth Simultaneous Tx conditions 9-10) (b) LTE Transmitter and Antenna Implementation Description of LTE Tx and Ant. Implementation A-MPR (Additional MPR) disabled for SAR Testing? Power Reduction used for SAR Compliance? 2.4 GHz WI-FI UE Category LTE MPR Permanently implemented per 3GPP TS 36.101 section 6.2.3~6.2.5? (manufacturer attestation to be provided) Hotspot with LTE+WIFI Conducted power Table provided for 1RB (low and high offset), 50% RB (centered), 100% RB 835 MHz CDMA Modulations Supported in UL LTE Voice available? RF Exposure Configurations 3) H, M, L channel numbers and frequencies Mid 1880 Band 4 5 MHz BW N/A Non-LTE US Wireless Operating Modes/Band Hotspot with LTE+WIFI active with 1XVoice sessions? Mid 1732.5 1900 MHz CDMA 5 MHz BW No No

SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 External Photos EUT Type: Portable Handset Page 1 of 4 © 2011 PCTEST Engineering Laboratory Inc. EXTERNAL PHOTOGRAPHS SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 External Photos EUT Type: Portable Handset Page 2 of 4 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 External Photos EUT Type: Portable Handset Page 3 of 4 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 External Photos EUT Type: Portable Handset Page 4 of 4 © 2011 PCTEST Engineering Laboratory Inc.

Confidential SC H-R920 Tri - Band Quad - Mode 2011. 10 -1- FCCApprovalDocument for SCH- R920 FCC ID : A3LSCHR920 3. Label Location SAMSUNG ELECTRONICS CO, LTD GH68-00000A 110516110516110516 LABEL-MAIN SCH-R920 Yun Jun SangJo Kyeong HwanKim June Sop Technical Description 1. Use ‘AI/PDF’ provided by ‘SAMSUNG’ for letter and contents 2. Background color is ‘WHITE’, letter color is ‘BLACK’ (reverse for SAMSUNG LOGO) 3. Back side should be attached to release paper once adhesive is applied. 4. No letter should be blur/smeared 5. The production must be proceed after the approval of R&D Group 6. The product must be within approved sample's specification tolerance. 7. The product must be finished in a ROLL 8. Release paper must be unified for material and color(blue) Vendor HANSUNG P&I 43.0 R1.0 C2 2-R0.5 56.0 OPP Laminating 16 Adhesive 8 WHITE POLYPROPYLENE 80 Adhesive 25 (0.13T±0.01) MODEL: SCH-R920 FCC ID: A3LSCHR920 FOR INFORMATION CALL: 1 888 987 4357 Confidential SC H-R920 Tri - Band Quad - Mode 2011. 10 -1- FCCApprovalDocument for SCH- R920 FCC ID : A3LSCHR920 2. Sample Label SAMSUNG ELECTRONICS CO, LTD The label is placed inside the battery compartment MODEL: SCH-R920 FCC ID: A3LSCHR920 FOR INFORMATION CALL: 1 888 987 4357

SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 1 of 8 © 2011 PCTEST Engineering Laboratory Inc. INTERNAL PHOTOGRAPHS SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 2 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 3 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 4 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 5 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 6 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 7 of 8 © 2011 PCTEST Engineering Laboratory Inc. SAMSUNG ELECTRONICS FCC ID: A3LSCHR920 Model: SCH-R920 Internal Photos EUT Type: Portable Handset Page 8 of 8 © 2011 PCTEST Engineering Laboratory Inc.

FCC ID: A3LSCHR920 SAR COMPLIANCE REPORT Reviewed by: Quality Manager Filename: Test Dates: EUT Type: Page 1 of 44 0Y1110171818.A3L 10/10/11 – 10/21/11 Portable Handset © 2011 PCTEST Engineering Laboratory, Inc. REV 9.4M 09/08/2011 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. 10/10/11 - 10/21/11 18600 Broadwick St. Test Site/Location: Rancho Dominguez, CA 90220 PCTEST Lab, Columbia, MD, USA United States Test Report Serial No.: 0Y1110171818.A3L FCC ID: A3LSCHR920 APPLICANT: SAMSUNG ELECTRONICS, CO. LTD. EUT Type: Portable Handset Application Type: Certification FCC Rule Part(s): Model(s): CFR §2.1093; FCC/OET Bulletin 65 Supplement C [June 2001] SCH-R920 Test Device Serial No.: Pre-Production [S/N: 99, 94, 93, 19] 1 gm Head (W/kg) 1 gm Body-Worn (W/kg) 1 gm Hotspot (W/kg) Cell. CDMA/EVDO824.70 - 848.31 MHz24.380.300.91 AWS CDMA/EVDO1711.25 - 1753.75 MHz24.370.540.84 AWS LTE1710.7-1754.3 MHz23.400.780.32 PCS CDMA/EVDO1851.25 - 1908.75 MHz24.500.550.90 PCS LTE1850.7-1909.3 MHz23.350.600.44 2.4 GHz WLAN2412 - 2462 MHz15.960.020.01 Bluetooth2402 - 2480 MHz11.83 N/A 1.35 W/kg Simultaneous SAR per KDB 690783: SAR Band & Mode N/A Tx Frequency Conducted Power [dBm] Note: Powers in the above table represent output powers for the SAR test configurations and may not represent the highest output powers for all capabilities. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001), IEEE 1528-2003 and in applicable Industry Canada Radio Standards Specifications (RSS); for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. PCTEST certifies that no party to this application has been subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.pctestlab.com SAR COMPLIANCE EVALUATION REPORT FCC ID: A3LSCHR920 SAR COMPLIANCE REPORT Reviewed by: Quality Manager Filename: Test Dates: EUT Type: Page 2 of 44 0Y1110171818.A3L 10/10/11 – 10/21/11 Portable Handset © 2011 PCTEST Engineering Laboratory, Inc. REV 9.4M 09/08/2011 TABLE OF CONTENTS 1 LTE INFORMATION PER KDB 941225 D05 .................................................................................. 3 2 INTRODUCTION ............................................................................................................................. 4 3 TEST SITE LOCATION ................................................................................................................... 5 4 SAR MEASUREMENT SETUP ....................................................................................................... 6 5 DASY E-FIELD PROBE SYSTEM .................................................................................................. 8 6 PROBE CALIBRATION PROCESS ................................................................................................ 9 7 PHANTOM AND EQUIVALENT TISSUES .................................................................................... 10 8 DOSIMETRIC ASSESSMENT & PHANTOM SPECS................................................................... 11 9 DEFINITION OF REFERENCE POINTS ...................................................................................... 12 10 TEST CONFIGURATION POSITIONS ......................................................................................... 13 11 FCC RF EXPOSURE LIMITS ........................................................................................................ 16 12 FCC 3G MEASUREMENT PROCEDURES .................................................................................. 17 13 OUTPUT POWER MEASUREMENTS .......................................................................................... 20 14 SYSTEM VERIFICATION .............................................................................................................. 27 15 SAR DATA SUMMARY ................................................................................................................. 30 16 FCC MULTI-TX AND ANTENNA SAR CONSIDERATIONS ......................................................... 36 17 SIMULTANEOUS TRANSMISSION ANALYSIS ........................................................................... 37 18 EQUIPMENT LIST ......................................................................................................................... 40 19 MEASUREMENT UNCERTAINTIES ............................................................................................ 41 20 CONCLUSION ............................................................................................................................... 42 21 REFERENCES .............................................................................................................................. 43 FCC ID: A3LSCHR920 SAR COMPLIANCE REPORT Reviewed by: Quality Manager Filename: Test Dates: EUT Type: Page 3 of 44 0Y1110171818.A3L 10/10/11 – 10/21/11 Portable Handset © 2011 PCTEST Engineering Laboratory, Inc. REV 9.4M 09/08/2011 1 LTE INFORMATION PER KDB 941225 D05 1) 2) LowHigh 1850.71909.3 1851.51908.5 1852.51907.5 LowHigh 1710.71754.3 1711.51753.5 1712.51752.5 4)(a) 5) 6) 7) 8) RF Output Power (dBm) 11) 12) 13-15) 1750 MHz CDMA A3LSCHR920 1.4, 3, and 5 MHz BW See 3…

Text truncated - open the document above for the full version.

Reviewed by: FCC ID: A3LSCHR920 FCC Pt. 22/24/27 CDMA / EvDO MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1110171813.A3L October 20 - 24, 2011 Portable Handset Page 1 of 49 © 2011 PCTEST Engineering Laboratory, Inc. REV 1.3CAPC 09/15/2011 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. October 20 - 24, 2011 18600 Broadwick St. Test Site/Location: Rancho Dominguez, CA 90220 PCTEST Lab., Columbia, MD, USA United States Test Report Serial No.: 0Y1110171813.A3L FCC ID: A3LSCHR920 APPLICANT: SAMSUNG ELECTRONICS, CO. LTD. Application Type: Certification FCC Classification: PCS Licensed Transmitter Held to Ear (PCE) FCC Rule Part(s): §2; §22(H), §24(E), §27(C) EUT Type: Portable Handset Model(s): SCH-R920 Test Device Serial No.: identical prototype [S/N: #99] Maximu m Power (Wa tts) Maximum Power (dBm) CDMA850824.70 - 848.311M28F9W0.09719.85 CDMA17001711.25 - 1753.751M28F9W0.22023.43 CDMA19001851.25 - 1908.751M29F9W0.39525.96 Mode Tx Frequency (MHz) Em issio n Desi gn ato r ERP/EIRP This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in §2.947. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST certifies that no party to this application has been subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 22, 24, & 27 / IC RSS-132/RSS-133/RSS-139 Reviewed by: FCC ID: A3LSCHR920 FCC Pt. 22/24/27 CDMA / EvDO MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1110171813.A3L October 20 - 24, 2011 Portable Handset Page 2 of 49 © 2011 PCTEST Engineering Laboratory, Inc. REV 1.3CAPC 09/15/2011 TABLE OF CONTENTS FCC PART 22, 24 & 27 MEASUREMENT REPORT......................................................................3 1.0 INTRODUCTION ..............................................................................................................................4 1.1 SCOPE ................................................................................................................................................ 4 1.2 TESTING FACILITY............................................................................................................................. 4 2.0 PRODUCT INFORMATION..............................................................................................................5 2.1 EQUIPMENT DESCRIPTION .............................................................................................................. 5 2.2 DEVICE CAPABILITIES....................................................................................................................... 5 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ........................................................................... 5 2.4 LABELING REQUIREMENTS.............................................................................................................. 5 3.0 DESCRIPTION OF TESTS ..............................................................................................................6 3.1 MEASUREMENT PROCEDURE......................................................................................................... 6 3.2 OCCUPIED BANDWIDTH EMISSION LIMITS .................................................................................... 6 3.3 CELLULAR - BASE FREQUENCY BLOCKS....................................................................................... 6 3.4 CELLULAR - MOBILE FREQUENCY BLOCKS ................................................................................... 7 3.5 AWS - BASE FREQUENCY BLOCKS ................................................................................................. 7 3.6 AWS - MOBILE FREQUENCY BLOCKS ............................................................................................. 7 3.7 PCS - BASE FREQUENCY BLOCKS .................................................................................................. 8 3.8 PCS - MOBILE FREQUENCY BLOCKS .............................................................................................. 8 3.9 SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL.............................................. 8 3.10 RADIATED POWER AND RADIATED SPURIOUS EMISSIONS ........................................................ 8 3.11 PEAK-AVERAGE RATIO ..................................................................................................................... 9 3.12 FREQUENCY STABILITY / TEMPERATURE VARIATION ................................................................. 9 4.0 TEST EQUIPMENT CALIBRATION DATA ....................................................................................10 5.0 SAMPLE CALCULATIONS ............................................................................................................11 6.0 TEST RESULTS .............................................................................................................................12 6.1 SUMMARY......................................................................................................................................... 12 6.2 EFFECTIVE RADIATED POWER OUTPUT DATA ........................................................................... 13 6.3 EQUIVALENT ISOTROPIC RADIATED POWER OUTPUT DATA ...................…

Text truncated - open the document above for the full version.

Reviewed by: FCC ID: A3LSCHR920 FCC Pt. 24 / 27 LTE MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0Y1110171814.A3L October 18 - 21, 2011 Portable Handset Page 1 of 68 © 2011 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 Applicant Name: Date of Testing: Samsung Electronics, Co. Ltd. October 18 - 21, 2011 18600 Broadwick St. Test Site/Location: Rancho Dominguez, CA 90220 PCTEST Lab., Columbia, MD, USA United States Test Report Serial No.: 0Y1110171814.A3L FCC ID: A3LSCHR920 APPLICANT: SAMSUNG ELECTRONICS, CO. LTD. Application Type: Certification FCC Classification: PCS Licensed Transmitter Held to Ear (PCE) FCC Rule Part(s): §2; §24, §27 EUT Type: Portable Handset Model(s): SCH-R920 Test Device Serial No.: identical prototype [S/N: #93, #94] Max. Power (W) Max. Power (dBm) LTE Band…

Text truncated - open the document above for the full version.