A3LSMA156MPortable Handset

Quick Reference Guide (Terms an d Conditions) SM-A156M/DSN, SM-A156M/N Read this document before operating the mobile device, accessories, or software (defined collectively and individually as the “Product”) and keep it for future reference. This document contains important Terms and Conditions. Electronic acceptance, opening the packaging, use, or retention of the Product constitutes acceptance of these Terms and Conditions. Visit www.samsung.com/us to view device information, the user manual, and more. You may incur additional charges for accessing the Internet. Device Layout To turn on the device, pr ess and hold th e Side key for a few seconds. The charger should remain close to the electric socket and easily accessible while charging. Installing a nano-SIM card Nano- SIM cards are sold separately. Contact us Questions? Visit us.community.samsung.com Get Support Call 1.800.SAMSUNG Service locations Find a service location near you at Samsung.com/us/support/service/locations Switching made simple Whether you are coming from an iOS or Android platform, you can easily transfer your data with Smart Switch. Back up your old phone Back up your old phone using your favorite back-up app. Samsung Smart Switch 1. From your new Galaxy device, tap Settings > Accounts and backup > Smart Switch. 2. Tap Receive data. 3. Select your old device type. 4. Tap Cable (Android) or Wireless (Android and iOS) and follow the prompts to connect your phones. Customize Tap Settings to personalize your phone. Flight mode This disables all wireless functions on your devic e. You can use only non- network services On the setting screen, tap Flight mode. Important l egal information Arbitration Agreement - This Product is subject to a binding arbitrat ion agreement between you and SAMSUNG ELECTRONICS AMERICA, INC. (“Samsung”). You can opt out of t he agreement within 30 calendar days of the first consumer purchase by emailing [email protected] or calling 1-800-SAMSUNG (726-7864) and providing the applicable information. The full Arbitration Agreement, Standard One-year Limited Warranty, End User License Agreement (EULA), and Health & Safety Information for your device are available online: •English: www.samsung.com/us/Legal/Phone-HSGuide •Spanish: www.samsung.com/us/Legal/Phone-HSGuide-SP This information can also be found on the device in the “About device” or “About phone” or “About tablet” section, for example: •Settings > About phone or About device or About tablet > Legal information > Samsung legal •Or,Search “Legal” If your device required Federal Communications Commission (FCC) approval, you can view the FCC certification by opening Settings > About phone or About device or About tablet> Status Information Health and Safety WARNING! To avoid electri c shock and damage to your device, do not charge device while it is wet or in an area where it co uld get wet. Do not handle device, c harger or cords with wet hands while charging. Maint aining dust and water resistance The device is not impervious to dust and water damage in any situation. It is important that all c ompartments are closed tightly. Follow these tips carefully to prevent damage to the device and maintain dust and water resistance performance: •Water resistant based on IP68 rating, which tests submersion in fresh water deeper than 1.5 meters or keep it submerged for more than 30 minutes. If device is exposed to fresh water, dry it thoroughly with a clean, soft cloth; if exposed to liquid other than fresh water, rinse with fresh water and dry as directed. •Any device which uses accessible compar tments or por ts that can be opened should have these se aled or closed tightly to prevent liquid from entering th e system. •If the device has been immersed i n water or the microphone or speaker is wet, sound may not be heard clearly during a call. After wiping the device with a dry cloth, dry it thoroughly before using it. •Do not expose the device to water at high pressure. •If the device is dropped or receives an impact, the water and dust resistant features of the device may be damaged. Note: Liquid other than fresh water may enter the device fa ster. Failure to rinse the device in fresh water and dry it as instructed may cause the device to suffer from operability or cosmetic issues. Samsung Knox Samsung Knox is Samsung’s security platf orm. Additional licensing fees may be required for enterprise use. For more information about Knox, pl ease refer to: www.samsung.com/us/knox Specific Absorption Rate (SAR) certification information For information about SAR, visit : •https://www.fcc.gov/general/radio-frequency-safety-0 •www.fcc.gov/encyclopedia/ speci fic -absorption-rate-sar-cellular-telephones •www.samsung.com/sar Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between the device and the user's body. Samsung Wireless Power Sharing feature allows device -to -device charging without the need for a charger. If your device supports the wireless power sharing function, this equipment should be operated with a minimum distance of 20 cm between the device and your body. Note: Foldable devices can be stored in an environment with ambient temperatures of -10°C / 14.0°F to 50°C / 122°F safely; prolonged exposure to temperatures outside these recommended temperatures can pose a high risk of damage to the device. Samsung mobile products and recycling WARNING! Never dispose of batteries in a fire because they may explode. Do not disassemble, crush, puncture, heat, burn or reuse. F or battery and cell phone recycling, go to call2re cycle. org or call 1- 800-822-8837. F or more recycling information, go to our website: www.samsung.com/re cycling or call 1-800-S AMSUNG. Your location Location-based information on that can be used to determine the approximate location of a mobile device. If you use applic ations that require location-b…

Text truncated - open the document above for the full version.

Samsung Electronics America, Inc 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: November 07, 2023 FCC ID: A3LSMA156M To whom it may concern: We, the undersigned, hereby authorize Element Washington DC LLC, to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Element Washington DC LLC. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to any application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S. C. 862. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

47 CFR §2.903 and §2.911 (d)(5) Attestation Date: 10-17-2023 FCC ID: A3LSMA156M To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1.Samsung Electron ics Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Samsung Electronics Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

47 CFR §2.911 (d)(7) Agent Designation Attestation Date: 10-17-2023 FCC ID: A3LSMA156M To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Samsung Electronics Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person : Ms. Jenni Chun Company Name : Samsung Electronics Co., Ltd. Company Address : Email : FRN: 19 Chapin Rd., Building D, Pine Brook, NJ 07058, USA [email protected] 0027908797 Sincerely yours, Name: Ms. Jenni Chun Job Title: Head of Regulatory & Environmental Affairs Company Name: Samsung Electronics Co., Ltd.

SAMSUNG ELECTRONICS CO., LTD 129, Samsung-ro, Yeongtong-gu Suwon-si, Gyeonggi-do, 443-742 Korea Nov. 7, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Label Statement FCC ID : A3LSMA156M To whom it may concern We hereby provide the following attestations according to CFR 2.935 and FCC KDB 784748 D02: At t he time of purchase, the FCC ID is readily and physically visible to the purchaser on the exterior package per CFR 2.935(f). The FCC ID will be readily legible without the aid of magnification according to CFR 2.935(d). The literature in the package describes how to access the electronic display to find the FCC ID per CRF 2.935(b) and FCC KDB 784748. Per CFR 2.935(c), the user will be able to access this information within a maximum of 3 steps. The user will be able to access this information without a SIM card, special accessories or supplemental plug-ins. Per CFR 2.935(e), We, Samsung have programmed the e-label and it is not able to be modified by any third party. Per CF R 2.935(f), the FCC ID will be able to survive normal shipping and handling so it is visible for inspection at the time of import. Should you have any questions or comments concerning the above, please contact the undersigned. Sincer ely Yours, Jenni C hun/ General Manager Samsung Electronics America. Inc Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

MPR Attestation letter for LTE - FCC ID : A3LSMA156M - Model name : SM-A156M/DSN, SM-A156M/N To Whom it May Concern Samsung Electronics Co., Ltd. 129, Samsung-ro, Yeontong-gu, Suwon-si, Gyeonggi-do, 16677, Korea We attest the following regarding FCC ID A3LSMA156M. 1.MPR is permanently implemented for all channel BWs, modulations, frequency bands and RB sizes. 2.A-MPR was disabled for all SAR test samples for SAR testing purposes only. 3.We confirm the specific MPR targets and tolerances shown in the SAR Report. All deviations in the power measurements from the specific MPR targets shown in the SAR Report are expected and within factory tolerances. 4.LTE Release 15 implementation is limited. The uplink does not support enhanced SC-FDMA. Features such as CoMP, HetNet, Relay, SON, cross carrier scheduling, eICIC, enhanced downlink MIMO, MBMS, M2M/D2 are also not supported. SVLTE is not supported as described in the operational description. 5.This device complies with FCC Part 27.75(a)(1) requirements: Mobile and portable stations that operate on any portion of frequencies in the paired 1755-1780 MHz and 2155-2180 MHz band must be capable of operating on all frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band, using the same air interfaces that the equipment utilizes on any frequencies in the paired 1710-1780 MHz and 2110-2180 MHz band. 6.This device complies with FCC Part 27.77 requirements: Mobile and portable stations in the 1695-1710 MHz and 1755-1780 MHz bands may operate only when under the control of a base station. Base stations that enable mobile or portable equipment to operate in the 1695-1710 MHz and 1755-1780 MHz band are subject to prior coordination requirements. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely, Ms. Jenni Chun GGeeneral Manager Samsung Electronics CO. LTD TEL: 1 -973-808-6375 E-mail: [email protected]

SAMSUNG ELECTRONICS AMERICA, INC. American QA Lab 19 Chapin Rd, Building D. Pine Brook, NJ 07058 Date: November 07, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE:Request of Confidentiality for FCC ID: A3LSMA156M To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, SAMSUNG ELECTRONICS CO.,LTD. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to th e public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give SAMSUNG ELECTRONICS CO.,LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST ExhibitDescription PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 Parts List & Tune-Up Procedure SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 Users Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely, Jenni Chun / General Manager Samsung Electronics America, Inc. Address: 19 Chapin Rd., Building D Pine Brook, NJ 07058 Tel: 1-973-808-6375

External 1(front view) FCC ID: A3LSMA156M External Photos External 2(rear view) External 3(left side view) External 4(right side view) External 5(top view) External 6(bottom view)

Description of E-label on the A3LSMA156M Date: Nov. 16, 2023 FCC ID: A3LSMA156M This model is applied E-label, please find description of E-label below. 1.FCC ID (E-label): Settings > About Phone > Status Information FCC certification FCC ID: A3LSMA156M <Device D isplay Screen> 2.FCC ID on the Quick Start Guide The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guide lines. This device has a FCC ID number A3LSMA156M [Model Number: SM-A156M/DSN, SM-A156M/N] and the specific SAR levels for this device can be found at the following. FCC website: www.fcc.gov/oet/ea/ The SAR information for this device can be found on Samsung’s website: www.samsung.com/sar

FCC ID: A3LSMA156M In ternal Photos

YW 5/24/2023 Object: Date Issued: Page 1 of 4 D835V2 – SN: 4d040 05/16/2023 Certification of Calibration Object D835V2 – SN: 4d040 Calibration procedure(s) Procedure for Calibration Extension for SAR Dipoles. Extended Calibration date: May 16, 2023 Description: SAR Validation Dipole at 835 MHz. Calibration Equipment used: Measurement Uncertainty = ±23% (k=2) Name Function Signature Calibrated By: Arturo Oliveros Compliance Engineer l Approved By: Greg Snyder Executive VP of Operations Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number Agilent 8753ES S-Parameter Vector Network Analyzer 6/14/2022 Annual 6/14/2023 US39170118 Agilent E4438C ESG Vector Signal Generator 11/17/2022 Annual 11/17/2023 MY45093852 Amplifier Research 15S1G6 Amplifier CBT N/A CBT 343972 Rohde & Schwarz NRX Power Meter 1/11/2023 Annual 1/11/2024 102583 Rohde & Schwarz NRP-Z81 Wide Band Power Sensor 5/19/2022 Annual 5/19/2023 106562 Rohde & Schwarz NRP-Z81 Wide Band Power Sensor 5/19/2022 Annual 5/19/2023 106559 Traceable 4040 90080-06 Therm./ Clock/ Humidity Monitor 5/11/2022 Biennial 5/11/2024 221514974 Control Company 4353 Long Stem Thermometer 9/10/2021 Biennial 9/10/2023 210774685 Agilent 85033E 3.5mm Standard Calibration Kit 6/21/2022 Annual 6/21/2023 MY53402352 Mini-Circuits VLF-6000+ Low Pass Filter DC to 6000 MHz CBT N/A CBT N/A Narda 4772-3 Attenuator (3dB) CBT N/A CBT 9406 Mini-Circuits ZHDC-16-63-S+ 50-6000MHz Bidirectional Coupler CBT N/A CBT N/A Pasternack NC-100 Torque Wrench 12/5/2022 Biennial 12/5/2024 N/A SPEAG DAK-3.5 Dielectric Assessment Kit 8/15/2022 Annual 8/15/2023 1041 SPEAG EX3DV4 SAR Probe 2/13/2023 Annual 2/13/2024 7427 SPEAG DAE4 Dasy Data Acquisition Electronics 2/15/2023 Annual 2/15/2024 1403 Element Materials Technology (formerly PCTEST) 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. +1.408.538.5600 http://www.element.com Object: Date Issued: Page 2 of 4 D835V2 – SN: 4d040 05/16/2023 DIPOLE CALIBRATION EXTENSION Per KDB 865664 D01, calibration intervals of up to three years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements: 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 2-year calibration period from the calibration date: Calibration Date Extension Date Certificate Electrical Delay (ns) Certificate SAR Target Head (1g) W/kg @ 23.0 dBm Measured Head SAR (1g) W/kg @ 23.0 dBm Deviation 1g (%) Certificate SAR Target Head (10g) W/kg @ 23.0 dBm Measured Head SAR (10g) W/kg @ 23.0 dBm Deviation 10g (%) Certificate Impedance Head (Ohm) Real Measured Impedance Head (Ohm) Real Difference (Ohm) Real Certificate Impedance Head (Ohm) Imaginary Measured Impedance Head (Ohm) Imaginary Difference (Ohm) Imaginary Certificate Return Loss Head (dB) Measured Return Loss Head (dB) Deviation (%) PASS/FAIL 5/16/2022 5/16/2023 1.393 1.958 1.99 1.63% 1.28 1.31 2.66% 50.8 48.8 2.0 -1.6 3.0 4.6 -34.9 -28.2 19.20% PASS Calibration Date Extension Date Certificate Electrical Delay (ns) Certificate SAR Target Body (1g) W/kg @ 23.0 dBm Measured Body SAR (1g) W/kg @ 23.0 dBm Deviation 1g (%) Certificate SAR Target Body (10g) W/kg @ 23.0 dBm Measured Body SAR (10g) W/kg @ 23.0 dBm Deviation 10g (%) Certificate Impedance Body (Ohm) Real Measured Impedance Body (Ohm) Real Difference (Ohm) Real Certificate Impedance Body (Ohm) Imaginary Measured Impedance Body (Ohm) Imaginary Difference (Ohm) Imaginary Certificate Return Loss Body (dB) Measured Return Loss Body (dB) Deviation (%) PASS/FAIL 5/16/2022 5/16/2023 1.393 1.958 2.00 2.15% 1.30 1.36 4.62% 46.7 44.2 2.5 -6.8 -2.1 4.7 -22.2 -26.1 -17.50% PASS Object: Date Issued: Page 3 of 4 D835V2 – SN: 4d040 05/16/2023 Impedance & Return-Loss Measurement Plot for Head TSL Object: Date Issued: Page 4 of 4 D835V2 – SN: 4d040 05/16/2023 Impedance & Return-Loss Measurement Plot for Body TSL

FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX D: Page 1 of 4 APPENDIX D: SAR TISSUE SPECIFICATIONS Measurement Procedure for Tissue verification: 1) The network analyzer and probe system was configured and calibrated. 2) The probe was immersed in the tissue. The tissue was placed in a nonmetallic container. Trapped air bubbles beneath the flange were minimized by placing the probe at a slight angle. 3) The complex admittance with respect to the probe aperture was measured 4) The complex relative permittivity ε ’ can be calculated from the below equation (Pournaropoulos and Misra): where Y is the admittance of the probe in contact with the sample, the primed and unprimed coordinates refer to source and observation points, respectively, , ω is the angular frequency, and . Figure D-1 Note: Liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. ( ) [] [] ∫ ∫ ∫ ′′ − ′ = b a b a rr ddd r rj ab j Y π ρρφ εεμω φ εωε 0 2/1 0 ' 0 2 0 )(exp cos ln 2 φρρρρ ′′ − ′ +=cos2 222 r 1−=j FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX D: Page 2 of 4 Figure D-2 600 – 6000 MHz Body Tissue Equivalent Matter FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX D: Page 3 of 4 Figure D-3 600 – 10000 MHz Head Tissue Equivalent Matter FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX D: Page 4 of 4 Figure D-4 5– 250 MHz Head Tissue Equivalent Matter

FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX F: Page 1 of 3 APPENDIX F: POWER REDUCTION VERIFICATION Per the May 2017 TCBC Workshop Notes, demonstration of proper functioning of the power reduction mechanisms is required to support the corresponding SAR configurations. The verification process was divided into two parts: (1) evaluation of output power levels for individual or multiple triggering mechanisms and (2) evaluation of the triggering distances for proximity-based sensors. F.1 Power Verification Procedure The power verification was performed according to the following procedure: 1. A base station simulator was used to establish a conducted RF connection and the output power was monitored. The power measurements were confirmed to be within expected tolerances for all states before and after a power reduction mechanism was triggered. 2. Step 1 was repeated for all relevant modes and frequency bands for the mechanism being investigated. 3. Steps 1 and 2 were repeated for all individual power reduction mechanisms and combinations thereof. For the combination cases, one mechanism was switched to a 'triggered' state at a time; powers were confirmed to be within tolerances after each additional mechanism was activated. FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX F: Page 2 of 3 F.2 Main Antenna Verification Summary Table F- 1 Power Measurement Verification for Main Antenna *Note: Low band refers to: GSM850, UMTS B5, LTE 12/17/13/26/5, NR n5; Mid band refers to: GSM1900, UMTS B2/4, LTE B2/66/4, NR n66; High band refers to: LTE B41 This device uses different Exposure Condition Indices (ECI) to configure different time averaged power levels based on certain exposure scenarios. For this device ECI = 1 represents the case where the device is held to ear, and ECI = 2 represents the case when hotspot mode is active. ECI = 4 is configured when the device cannot detect the use conditions. 1st2nd Free SpaceMechanism #1Mechanism #2 Held-to-EarHotspot OnLow Band Ant A411 Hotspot OnHeld-to-EarLow Band Ant A421 Held-to-EarHotspot OnMid Band Ant B411 Hotspot OnHeld-to-EarMid Band Ant B421 Held-to-EarHotspot OnMid Band Ant C411 Hotspot OnHeld-to-EarMid Band Ant C421 Held-to-EarHotspot OnHigh Band Ant B411 Hotspot OnHeld-to-EarHigh Band Ant B421 Mode/Band Mechanism(s) Exposure Condition Index (ECI) FCC ID A3LSMA156M SAR EVALUATION REPORT Approved by: Technical Manager DUT Type: Portable Handset APPENDIX F: Page 3 of 3 F.3 WIFI Verification Summary Table F- 2 Power Measurement Verification WIFI This device uses different Exposure Condition Indices (ECI) to configure different time averaged power levels based on certain exposure scenarios. For this device ECI = 1 represents the case where the device is held to ear, ECI = 0 is configured when the device cannot detect the use conditions. 1st Un-triggered (Max) Mechanism #1 (Reduced) Held-to-Ear802.11b0 1 Held-to-Ear 802.11g01 Held-to-Ear 802.11n (2.4GHz) 01 Held-to-Ear 802.11a (5GHz) 01 Held-to-Ear 802.11n (5GHz, 20MHz BW)0 1 Held-to-Ear802.11n (5GHz, 40MHz BW)01 Held-to-Ear 802.11ac (20MHz BW)0 1 Held-to-Ear 802.11ac (40MHz BW)01 Held-to-Ear802.11ac (80MHz BW)0 1 Mechanism(s) Mode/Band Exposure Condition Index (ECI)

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : TESA2310000627ES Page : 1 of 52 FCC TAS validation – Part 2: Tests under dynamic transmit power scenarios The following samples were submitted and identified on behalf of the client as: Equipment Under Test SAMSUNG Mobile Phone Brand Name Galaxy A Series Model No. SM-A156M/DSN Family Model No. SM-A156M/N Model Difference: Please refer to section 1.3 Applicant SAMSUNG Electronics Co., Ltd. 129, Samsung-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Rep. of Korea Standards IEEE/ANSI C95.1-1992, IEEE 1528-2013 FCC ID A3LSMA156M Date of Receipt Oct. 12, 2023 Date of Test(s) Oct. 30, 2023 ~ Oct. 31, 2023 Date of Issue Nov. 15, 2023 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Ltd. Central RF Lab or testing done by SGS Taiwan Ltd. Central RF Lab in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Ltd. Central RF Lab in writing. Signed on behalf of SGS Clerk / Cindy Chou PM / Kiki Lin Approved By / John Yeh Date: Nov. 15, 2023 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No. : TESA2310000627ES Page : 2 of 52 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2310000627ES 00 Initial creation of document Nov. 02, 2023 Cindy Chou TESA2310000627ES 01 Modify comment Nov. 15, 2023 Cindy Chou * Note: 1. The mark " * " is the revised version of the report due to comments submitted by the certification. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s inst…

Text truncated - open the document above for the full version.