A4RG025JPhone

English Press and hold the power button for 5 seconds to turn on your phone Follow the on-screen steps to set up your phone Set up your new Pixel Meet your new Pixel Power button Pixel Old phone’s cable Old phone Quick Switch Adapter (included in box) SIM card tray 3.5 mm audio jack Power button Volume up/down USB-C™ port Pixel Imprint Tips, new features, and help On your phone, tap Settings > Tips & support For help transferring data, visit g.co/datatransferhelp For help with accessibility, visit g.co/disabilitysupport Pixel, Google, and related marks and logos are trademarks of Google LLC. USB-C™ is a trademark of USB Implementers Forum. Regulatory Information The regulatory information, certification, and compliance marks specific to your phone can be found on your device under ​Settings > About phone > Regulatory labels ​and/or on the back of your phone. Additional regulatory and environmental information can be found at ​g.co/pixel/reg Radio Frequency Exposure Your phone has been evaluated and meets the applicable regulatory requirements for exposure to radio waves. It is designed and manufactured to not exceed the applicable emission limits for exposure to radio frequency (RF) energy. Your phone complies with radio frequency specifications when used near your ear or at a distance of 0.4 in (1.0 cm) from your body. To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or other similar accessories. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. You can learn more about radio frequency exposure at .co/pixel/RFE and on your device under Settings > About phone > Safety & regulatory manual FCC Regulatory Compliance Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference in one or more of the following ways: ●Reorient or relocate the receiving antenna ●Increase the separation between the equipment and receiver ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected ●Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by Google could void your authority to operate the equipment. EMC Compliance Statement Important: This device, power adapter, and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It’s important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Model: G025J, G025N, G025M Responsible Party: Google LLC 1600 Amphitheatre Parkway, Mountain View, CA 94043 g.co/pixel/support This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: ●This device may not cause harmful interference ●This device must accept any interference received, including interference that may cause undesired operation Hearing Aid Compatibility (HAC) Your device has been evaluated and certified to be compatible with hearing aids per technical specification ANSI C63.19. There are 2 measures of hearing aid compatibility: ●M rating, which is a measure of immunity to radio frequency interference for acoustic coupling hearing aids ●T rating, which is a measure of performance when used with an inductive coupling (telecoil) hearing aid. Per FCC rules, a mobile phone is considered hearing aid compatible if rated M3 or M4 for acoustic coupling or T3 or T4 for inductive coupling. Hearing aid compatible devices offered by Google: ●Pixel phone M3/T4 Your phone has been tested and rated for use with hearing aids for some of the wireless technologies that they use. However, there may be some newer wireless technologies used in these phones that have not yet been tested for use with hearing aids. It’s important to try the different features of your phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Google for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

1600 Amphitheatre Parkway Mountain View, CA 94043 USA Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 March 25, 2020 Subject: Request for Confidentiality FCC ID: A4RG025J To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 C.F.R. §§ 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. ●Schematic Diagram ●Block Diagram ●Theory of Operation (Operational and Technical Descriptions) ●Tune Up Procedure In support of this request, we provide the following information: 1.Identification of the specific information for which confidential treatment is sought (§ 0.459(b)(1)): We request that all of the information contained in the above-referenced exhibits to the certification application be withheld from routine public disclosure. 2.Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission (§ 0.459(b)(2)): The material is being submitted in connection with our certification application for the above-captioned FCC ID . 3.Explanation of the degree to which the information is commercial, or financial or contains a trade secret or is privileged (§ 0.459(b)(3)): The market for the technology that is the subject of the certification application is highly competitive, with numerous companies competing for the business of potential customers. Were competitors to become aware of the facts set forth in the above-referenced exhibits to the application at this time, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise might achieve by virtue of having the product available before other competitors. If any of the information for which confidential treatment is sought was made publicly available, competitors could reasonably determine the scope and status of our activities. 4.Explanation of the degree to which the information concerns a service that is competitive (§ 0.459(b)(4)): The technology that is the subject of the certification application is subject to intense competition from other manufacturers and service providers that are developing competing services and technology. 1 5.Explanation of how disclosure of the information could result in substantial competitive harm (§ 0.459(b)(5)): As noted above, were our competitors to become aware of the facts set forth in the above-referenced exhibits to the application, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise would achieve by virtue of having the product available before other providers. 6.Identification of any measures taken by the requesting party to prevent unauthorized disclosure (§ 0.459(b)(6)): The information contained in the above-referenced exhibits to the certification application has been strictly controlled by us, with distribution limited to internal use only and for the specific purpose of conducting research, development, and testing of the technology. 7.Identification of whether the information is available to the public and the extent of any previous disclosures of the information to any third parties (§ 0.459(b)(7)): The information that we request be maintained as confidential is not available publicly. The information has been protected and kept confidential by limiting external contacts to privileged and confidential communications. 8.Justification of the period during which the submitting party asserts that material should not be available for public disclosure (§ 0.459(b)(8)): Given the competitive nature of the marketplace, any disclosure that we have developed the technology discussed in the above-referenced exhibits to the certification application would harm our competitive position. The information subject to this request for confidentiality should not be made available for public disclosure at any time. In addition, pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we also request that the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. ●External Photos ●Internal Photos ●Test Setup Photos ●User Manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 T: 650-253-0646 E: [email protected] 2

1600 Amphitheatre Parkway Mountain View, CA 94043 USA Date: March 25, 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4RG025J To Whom It May Concern: I, the undersigned, hereby authorize Sporton International Inc. (Sporton) to act on Google LLC’s (Google) behalf in all manners relating to the above-captioned application for equipment authorization, including signing of all documents relating to this matter. Any and all acts carried out by Sporton on Google’s behalf shall have the same effect as acts of Google’s own. I, the undersigned, hereby certify that Google is not subject to a denial of federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 853(a). In authorizing Sporton as Google’s representative, Google recognizes that it is still responsible for: a) complying with the relevant provisions of the certification program; b) making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) making claims regarding certification only in respect of the scope for which certification has been granted; d) not using the product certification in such a manner as to bring Sporton into disrepute and not making any statement regarding the product certification that Sporton may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and return any certification documents as required by Sporton; 1 1600 Amphitheatre Parkway Mountain View, CA 94043 USA f) using the certification only to indicate that the products are certified as being in conformity with specified standards; g) endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner; h)ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Sporton’s requirements; i)keeping a record of all complaints made known to Google relating to the product’s compliance with the requirements of the relevant standard and making these records available to the applicable authorities when requested; j)taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; and k)documenting the actions taken. This authorization is valid until further written notice from Google. Sincerely Yours, John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 T: 650-253-0646 E: [email protected] 2

PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 1 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 720510 External Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 2 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 3 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 4 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 5 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 6 of 6 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 ─────THE END────

E-label Declaration FCC ID: A4RG025J FCC §2.935 Electronic labeling of radiofrequency devices. (a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device. Information On e-label In Manual FCC ID number Yes No 15.19 Statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class B Digital Device user manual statement No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment No Yes Image of the e-label screen is provided below: (b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related website, if such a web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification. The instruction on how to access the information is in the box in the Safety/Warranty/Regulatory booklet, and in the online version of the Safety/Warranty/Regulatory booklet: “Regulatory information, certification, and compliance marks can be found in the device settings menu: Settings > About phone > Regulatory labels” (c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access. No special accessories or supplemental plug-ins are required to access the information. To access the e-label information, on the device from the Home screen: Select: Settings > About phone > Regulatory labels (d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification; Yes (e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. (f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled, either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a webpage that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCC’s equipment authorization requirements. Devices can be labeled with a stick-on label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The FCC ID is present on the product packaging.

PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 1 of 5 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 720510 Internal Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 2 of 5 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 3 of 5 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 4 of 5 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP9D0616-05 Model Name: G025J, G025N, G025M TEL : 886-3-327-3456 Page Number : 5 of 5 FAX : 886-3-328-4978 Issued Date : Mar. 26, 2020 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page 1 of 108 FAX : 886-3-328-4978 Issued Date : Apr. 02, 2020 Form version: 200217 FCC SAR TEST REPORT Report No. : FA9D0616-05A FCC SAR TEST REPORT FCC ID : A4RG025J Equipment : Phone Model Name : G025J, G025N, G025M Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2013 The product was received on Jan. 17, 2020 and testing was started from Jan. 26, 2020 and completed on Mar. 19, 2020. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 108 FAX : 886-3-328-4978 Issued Date : Apr. 02, 2020 Form version: 200217 FCC SAR TEST REPORT Report No. : FA9D0616-05A Table of Contents 1. Statement of Compliance ..............................................................................................................................................4 2. Guidance Applied ...........................................................................................................................................................4 3. Equipment Under Test (EUT) Information ....................................................................................................................5 3.1 General Information ................................................................................................................................................5 3.2 Maximum Tune-up Limit ..........................................................................................................................................6 3.3 General LTE SAR Test and Reporting Considerations ..........................................................................................15 4. RF Exposure Limits .....................................................................................................................................................18 4.1 Uncontrolled Environment .....................................................................................................................................18 4.2 Controlled Environment .........................................................................................................................................18 5. Specific Absorption Rate (SAR) ..................................................................................................................................19 5.1 Introduction ...........................................................................................................................................................19 5.2 SAR Definition .......................................................................................................................................................19 6. System Description and Setup ...................................................................................................................................20 6.1 E-Field Probe ........................................................................................................................................................21 6.2 Data Acquisition Electronics (DAE) .......................................................................................................................21 6.3 Phantom ................................................................................................................................................................22 6.4 Device Holder .......................................................................................................................................................23 7. Measurement Procedures ...........................................................................................................................................24 7.1 Spatial Peak SAR Evaluation ................................................................................................................................24 7.2 Power Reference Measurement............................................................................................................................25 7.3 Area Scan .............................................................................................................................................................25 7.4 Zoom Scan ............................................................................................................................................................26 7.5 Volume Scan Procedures ......................................................................................................................................26 7.6 Power Drift Monitoring ...........................................................................................................................................26 8. Test Equipment List .....................................................................................................................................................27 9. System Verification ......................................................................................................................................................28 9.1 Tissue Simulating Liquids ......................................................................................................................................28 9.2 Tissue Verifica…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2020/2/8 System Check_Head_750MHz DUT: D750V3-1107 Communication System: CW ; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_200208 Medium parameters used: f = 750 MHz; σ = 0.906 S/m; ε r = 41.497; ρ = 1000 3 kg/m Ambient Temperature：23.4 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: ES3DV3 - SN3184; ConvF(6.61, 6.61, 6.61) @ 750 MHz; Calibrated: 2019/9/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1305; Calibrated: 2019/4/30 - Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1683 - Measurement SW: DASY52, Version 52.10 (2);SEMCAD X Version 14.6.12 (7470) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.36 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.29 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.78 W/kg SAR(1 g) = 2.03 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.32 W/kg 0 dB = 2.32 W/kg = 3.65 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2020/2/9 System Check_Head_750MHz DUT: D750V3-1107 Communication System: CW ; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_200209 Medium parameters used: f = 750 MHz; σ = 0.901 S/m; ε r = 41.732; ρ = 1000 kg/m 3 Ambient Temperature：23.6 °C; Liquid Temperature：22.6 °C DASY5 Configuration: - Probe: ES3DV3 - SN3184; ConvF(6.61, 6.61, 6.61) @ 750 MHz; Calibrated: 2019/9/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1305; Calibrated: 2019/4/30 - Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1683 - Measurement SW: DASY52, Version 52.10 (2);SEMCAD X Version 14.6.12 (7470) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.34 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.29 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 2.76 W/kg SAR(1 g) = 2.02 W/kg; SAR(10 g) = 1.38 W/kg Maximum value of SAR (measured) = 2.31 W/kg 0 dB = 2.31 W/kg = 3.64 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2020/2/10 System Check_Head_750MHz DUT: D750V3-1107 Communication System: CW ; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_200210 Medium parameters used: f = 750 MHz; σ = 0.904 S/m; ε r = 41.441; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: ES3DV3 - SN3184; ConvF(6.61, 6.61, 6.61) @ 750 MHz; Calibrated: 2019/9/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1305; Calibrated: 2019/4/30 - Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1683 - Measurement SW: DASY52, Version 52.10 (2);SEMCAD X Version 14.6.12 (7470) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.35 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.29 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 2.77 W/kg SAR(1 g) = 2.02 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.32 W/kg 0 dB = 2.32 W/kg = 3.65 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2020/2/11 System Check_Head_750MHz DUT: D750V3-1107 Communication System: CW ; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_200211 Medium parameters used: f = 750 MHz; σ = 0.902 S/m; ε r = 41.401; ρ = 1000 kg/m 3 Ambient Temperature：23.4 °C; Liquid Temperature：22.4 °C DASY5 Configuration: - Probe: ES3DV3 - SN3184; ConvF(6.61, 6.61, 6.61) @ 750 MHz; Calibrated: 2019/9/25 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1305; Calibrated: 2019/4/30 - Phantom: SAM_Right; Type: QD000P40CD; Serial: TP:1683 - Measurement SW: DASY52, Version 52.10 (2);SEMCAD X Version 14.6.12 (7470) Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.35 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 52.29 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 2.76 W/kg SAR(1 g) = 2.02 W/kg; SAR(10 g) = 1.39 W/kg Maximum value of SAR (measured) = 2.31 W/kg 0 dB = 2.31 W/kg = 3.64 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2020/3/19 System Check_Head_750MHz DUT: D750V3-1107 Communication System: CW ; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750_200319 Medium parameters used: f = 750 MHz; σ = 0.905 S/m; ε r = 40.878; ρ = 1000 kg/m 3 Ambient Temperature…

Text truncated - open the document above for the full version.