A4RGE1GQPhone

Appendix CReport No.: FA550731B Page169/311 Appendix CReport No.: FA550731B Page170/311 Appendix CReport No.: FA550731B Page171/311 Appendix CReport No.: FA550731B Page172/311 Appendix CReport No.: FA550731B Page173/311 Appendix CReport No.: FA550731B Page174/311 Appendix CReport No.: FA550731B Page175/311 Appendix CReport No.: FA550731B Page176/311 Appendix CReport No.: FA550731B Page177/311 Appendix CReport No.: FA550731B Page178/311 Appendix CReport No.: FA550731B Page179/311 Appendix CReport No.: FA550731B Page180/311 Appendix CReport No.: FA550731B Page181/311 Appendix CReport No.: FA550731B Page182/311 Appendix CReport No.: FA550731B Page183/311 Appendix CReport No.: FA550731B Page184/311 Appendix CReport No.: FA550731B Page185/311 Appendix CReport No.: FA550731B Page186/311 Appendix CReport No.: FA550731B Page187/311 Appendix CReport No.: FA550731B Page188/311 Appendix CReport No.: FA550731B Page189/311 Appendix CReport No.: FA550731B Page190/311 Appendix CReport No.: FA550731B Page191/311 Appendix CReport No.: FA550731B Page192/311 Appendix CReport No.: FA550731B Page193/311 Appendix CReport No.: FA550731B Page194/311 Appendix CReport No.: FA550731B Page195/311 Appendix CReport No.: FA550731B Page196/311 Appendix CReport No.: FA550731B Page197/311 Appendix CReport No.: FA550731B Page198/311 Appendix CReport No.: FA550731B Page199/311 Appendix CReport No.: FA550731B Page200/311 Appendix CReport No.: FA550731B Page201/311 Appendix CReport No.: FA550731B Page202/311 Appendix CReport No.: FA550731B Page203/311 Appendix CReport No.: FA550731B Page204/311 Appendix CReport No.: FA550731B Page205/311 Appendix CReport No.: FA550731B Page206/311 Appendix CReport No.: FA550731B Page207/311 Appendix CReport No.: FA550731B Page208/311 Appendix CReport No.: FA550731B Page209/311 Appendix CReport No.: FA550731B Page210/311 Appendix CReport No.: FA550731B Page211/311 Appendix CReport No.: FA550731B Page212/311 Appendix CReport No.: FA550731B Page213/311 Appendix CReport No.: FA550731B Page214/311 Appendix CReport No.: FA550731B Page215/311 Appendix CReport No.: FA550731B Page216/311 Appendix CReport No.: FA550731B Page217/311 Appendix CReport No.: FA550731B Page218/311

TEL : 886-3-327-3456 Page Number : 1 of 22 FAX : 886-3-328-4978 Issue Date : Nov. 04, 2025 Report Template No.: BU5-FR15CNFC Version 2.5 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR550731D FCC RADIO TEST REPORT FCC ID : A4RGE1GQ Equipment : Phone Model Name : GE1GQ Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, CA, 94043 USA Standard : FCC Part 15 Subpart C §15.225 The product was received on Jul. 02, 2025 and testing was performed from Jul. 04, 2025 to Jul. 17, 2025. We, Sporton International Inc. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 22 FAX : 886-3-328-4978 Issue Date : Nov. 04, 2025 Report Template No.: BU5-FR15CNFC Version 2.5 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR550731D Table of Contents History of this test report ....................................................................................................................................3 Summary of Test Result......................................................................................................................................4 1. General Description ........................................................................................................................................5 1.1 Product Feature of Equipment Under Test ............................................................................................................. 5 1.2 Modification of EUT ................................................................................................................................................ 5 1.3 Testing Location ..................................................................................................................................................... 6 1.4 Applicable Standards.............................................................................................................................................. 6 2. Test Configuration of Equipment Under Test ...............................................................................................7 2.1 Descriptions of Test Mode ...................................................................................................................................... 7 2.2 Connection Diagram of Test System ...................................................................................................................... 8 2.3 Table for Supporting Units ...................................................................................................................................... 9 2.4 EUT Operation Test Setup ................................................................................................................................... 10 3. Test Results .................................................................................................................................................. 11 3.1 AC Power Line Conducted Emissions Measurement ........................................................................................... 11 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement .................................................................................... 13 3.3 Frequency Stability Measurement ........................................................................................................................ 14 3.4 Field Strength of Fundamental Emissions and Mask Measurement ..................................................................... 15 3.5 Radiated Emissions Measurement ....................................................................................................................... 17 3.6 Antenna Requirements ......................................................................................................................................... 20 4. List of Measuring Equipment ...................................................................................................................... 21 5. Measurement Uncertainty ............................................................................................................................ 22 Appendix A. Test Results of Conducted Emission Test Appendix B. Test Results of Near Field Test Items B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions C2. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) Appendix D. Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 22 FAX : 886-3-328-4978 Issue Date : Nov. 04, 2025 Report Template No.: BU5-FR15CNFC Version 2.5 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR550731D History of this test report Report No. Version Description Issue Date FR550731D 01 Initial issue of report Sep. 24, 2025 FR550731D 02 Revise FCC ID in cover page This report is an updated version, replacing the report issued on Sep. 24, 2025. Oct. 01, 2025 FR550731D 03 Revise Appendix C This report is an updated version, replacing the report issued on Oct. 01, 2025. Nov. 04, 2025 TEL : 886-3-327-3456 Page Number : 4 of 22 FAX : 886-3-328-4978 Issue Date : Nov. 04, 2025 Report Template No.: BU5-FR15CNFC Version 2.5 Report Version : 03 FCC RADIO TEST REPORT Report No. : FR550731D Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.207…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page 1 of 137 FAX : 886-3-328-4978 Issued Date : Dec. 01, 2025 Template version: 240125 FCC SAR TEST REPORT Report No. : FA550731B FCC SAR TEST REPORT FCC ID : A4RGE1GQ Equipment : Phone Model Name : GE1GQ Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, CA, 94043 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on May 09, 2025 and testing was started from Jul. 19, 2025 and completed on Oct. 13, 2025. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 137 FAX : 886-3-328-4978 Issued Date : Dec. 01, 2025 Template version: 240125 FCC SAR TEST REPORT Report No. : FA550731B Table of Contents 1. Statement of Compliance ................................................................................................................................................................... 4 2. Equipment Under Test (EUT) Information ......................................................................................................................................... 5 General Information .......................................................................................................................................................................... 5 2.1 Maximum Tune-up Limit ............................................................................................................................................................. 6 2.2 General LTE SAR Test and Reporting Considerations .............................................................................................................. 31 2.3 General 5G NR SAR Test and Reporting Considerations ......................................................................................................... 34 3. TAS feature for RF Exposure compliance....................................................................................................................................... 37 3.1 SAR Characterization – Power Table ........................................................................................................................................ 38 4. RF Exposure Limits .......................................................................................................................................................................... 41 4.1 Uncontrolled Environment ......................................................................................................................................................... 41 4.2 Controlled Environment ............................................................................................................................................................ 41 4.3 RF Exposure limit for above 6GHz ............................................................................................................................................ 42 5. Guidance Applied ............................................................................................................................................................................. 43 6. Specific Absorption Rate (SAR) ...................................................................................................................................................... 43 6.1 Introduction ............................................................................................................................................................................... 43 6.2 SAR Definition .......................................................................................................................................................................... 43 7. System Description and Setup ........................................................................................................................................................ 44 7.1 Test Site Location ..................................................................................................................................................................... 44 7.2 E-Field Probe ........................................................................................................................................................................... 45 7.3 EUmmWave Probe / E-Field 5G Probe ..................................................................................................................................... 46 7.4 Data Acquisition Electronics (DAE) ........................................................................................................................................... 47 7.5 Phantom ................................................................................................................................................................................... 47 7.6 Device Holder ........................................................................................................................................................................... 48 8. Measurement Procedures ................................................................................................................................................................ 49 8.1 Spatial Peak SAR Evaluation .................................................................................................................................................... 49 8.2 Power Reference Measurement ..............................................…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page : G1 of G3 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. :FA550731B Appendix G. Supplemental Antenna Tuner Tests Results General Note: 1. This device implements antenna tuning techniques in the several frequency band and list as below. SAR test proposal was measured according to the normally required SAR configurations with the tuner active and worst tune state (auto tune) was used for SAR testing and this design will provide the highest power at different user scenarios and would not influence to the antenna characteristics other than impedance matching. 2. Dynamic antenna tuning mechanism is available at Ant.0 for its < 1GHz LTE and NR band. The number of supported tune codes is different for each frequency band as shown in the following table. And it’s verified that tune state results in the highest SAR configuration 3. The antenna tuner state shall be controlled remotely such that the DUT position is not moved during the series of single-point SAR measurements. 4. For each air interface, exposure condition, and antenna that supports dynamic antenna tuning (DAT), the following procedure shall be followed: a. An area scan is performed with the DUT positioned for the exposure condition with auto-tuner enabled to determine the peak SAR location b. A single-point SAR measurement (i.e., time sweep) is performed at the peak SAR location of step a (that is, with auto-tuner enabled). The auto-tuner state shall be recorded, after verifying that it is stable. If fluctuations occur, the scan procedure can be restarted, or the state with the highest SAR needs to be recorded c. Without moving the probe, or introducing any other perturbation, the auto-tuner shall be disabled, and two other adjacent tune states shall be chosen by increasing and decreasing the state identification number by 1 d. A single point SAR measurement is then performed on both chosen adjacent states and compared with the value of step b. The measured SAR for auto-tuner disabled is expected to be less than or equal to the recorded SAR of step b. If the measured SAR is higher beyond documented tolerance, then the auto-tuning feature is not working as intended and is not suitable for compliance. DAT functionality shall be removed or adjusted by the manufacturer. If the measured SAR is higher than the value of step b but within tolerance, the next adjacent state(s) shall be chosen and the measure repeated until a lower SAR value can be shown; otherwise, the DAT is considered inoperative and shall be removed or adjusted by the manufacturer. e. Repeat step b with auto-tuning enabled as a test for variability within tolerance: the previous measured value in step 2.2 shall be recovered. If the measured SAR is outside the expected tolerance, then the auto-tuning feature is considered not working as intended and not suitable for compliance. DAT functionality shall be removed or adjusted by the manufacturer f. If any single-point SAR measurement result is >1.4 W/kg, then all tune states for that particular combination of air interface, exposure condition, and antenna selection shall be evaluated with single-point SAR measurements. Antenna Band Number of tune states Ant 0 LTE Band 12/17/ FR1 n12 84 LTE Band 13 68 LTE Band 14 / FR1 n14 34 LTE Band 26/5 / FR1 n26/5 82 LTE Band 71 / FR1 n71 53 TEL : 886-3-327-3456 Page : G2 of G3 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. :FA550731B <Antenna tuner Verification result> Config TX0 RF exposure position Band Mode Channel Test Position Measured 1g SAR (W/kg) Reported 1g SAR (W/kg) Auto-tuner enable_Initial Auto-tuner disabled Verify adjacent tuner Repeat Auto-tuner enable State Single Point SAR (W/kg) State Single Point SAR (W/kg) State Single Point SAR (W/kg) State Single Point SAR (W/kg) Ant 0 LTE Band 12 10M QPSK 1 0 23095 707.5 Left Cheek 0.257 0.338 42 0.301 41 0.275 43 0.266 42 0.298 Ant 0 LTE Band 12 10M QPSK 1 0 23095 707.5 Left Edge 5mm 0.372 0.416 37 0.967 36 0.819 38 0.842 37 0.944 Ant 0 LTE Band 13 10M QPSK 1 0 23230 782 Left Cheek 0.264 0.332 40 0.362 39 0.272 41 0.330 40 0.357 Ant 0 LTE Band 13 10M QPSK 1 0 23230 782 Left Edge 5mm 0.412 0.440 37 0.662 36 0.613 38 0.615 37 0.659 Ant 0 LTE Band 14 10M QPSK 1 0 23330 793 Right Cheek 0.271 0.333 7 0.359 6 0.274 8 0.318 7 0.361 Ant 0 LTE Band 14 10M QPSK 1 0 23330 793 Left Edge 5mm 0.441 0.446 4 0.725 3 0.714 5 0.663 4 0.692 Ant 0 LTE Band 26 15M QPSK 1 0 26865 831.5 Left Cheek 0.264 0.335 7 0.437 6 0.308 8 0.317 7 0.435 Ant 0 LTE Band 26 15M QPSK 1 0 26865 831.5 Left Edge 5mm 0.309 0.320 7 0.617 6 0.476 8 0.370 7 0.613 Ant 0 LTE Band 71 20M QPSK 1 0 133297 680.5 Left Cheek 0.245 0.310 20 0.496 19 0.458 21 0.378 20 0.501 Ant 0 LTE Band 71 20M QPSK 1 0 133297 680.5 Back 5mm 0.407 0.480 20 0.725 19 0.613 21 0.355 20 0.726 Ant 0 FR1 n12 15M BPSK 36 22 141500 707.5 Left Cheek 0.207 0.254 42 0.287 41 0.266 43 0.212 42 0.279 Ant 0 FR1 n12 15M BPSK 36 22 141500 707.5 Left Edge 5mm 0.411 0.442 37 0.679 36 0.605 38 0.579 37 0.682 Ant 0 FR1 n14 10M BPSK 1 1 158600 793 Left Cheek 0.269 0.342 7 0.348 6 0.269 8 0.322 7 0.344 Ant 0 FR1 n14 10M BPSK 1 1 158600 793 Left Edge 5mm 0.438 0.448 4 0.751 3 0.692 5 0.644 4 0.736 Ant 0 FR1 n26 20M BPSK 50 28 166300 831.5 Left Cheek 0.284 0.361 7 0.456 6 0.329 8 0.325 7 0.456 Ant 0 FR1 n26 20M BPSK 1 1 166300 831.5 Left Edge 5mm 0.306 0.339 7 0.623 6 0.502 8 0.402 7 0.613 Ant 0 FR1 n71 20M BPSK 1 1 136100 680.5 Left Cheek 0.207 0.250 20 0.266 19 0.228 21 0.196 20 0.263 Ant 0 FR1 n71 20M BPSK 1 1 136100 680.5 Back 5mm 0.394 0.507 20 0.642 19 0.587 21 0.533 20 0.636 TEL : 886-3-327-3456 Page : G3 of G3 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. :FA550731B Appendix G. Supplemental SAR Tests Results SAR test result 1. The test data is selected according to the worst case SAR configuration per cellular technology. 2. The test data is to demonstrate the device is in compliance with FCC requirements at 25mm when all power reduction mechanisms are OFF. The worst case bo…

Text truncated - open the document above for the full version.

Page : F1 of F60 FCC SAR TEST REPORT Report No. :FA550731B Appendix F. Sim-Tx SAR consideration F.1 Sim-Tx Configuration Exposure Condition Tx mode Capable TX Configurations WWAN Power Index WiFi Power Index BT Power Index Head WWAN standalone WWAN Index 2 WiFi standalone WiFi 2.4G SISO (Ant4 or Ant3) Index 1 WiFi 2.4G MIMO/CDD (Ant4+3) WiFi 5G MIMO (Ant4+3) WiFi 6E MIMO (Ant4+3) WiFi 2.4G SISO (Ant3) + WiFi 5G SISO (Ant4) Index 2 (SDB) WiFi 2.4G SISO (Ant3) + WiFi 6E SISO (Ant4) BT standalone Bluetooth (Ant4) Index 1 Bluetooth (Ant3) WiFi +BT WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant4) Index 1 Index 1 WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant3) WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant4) WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant3) WiFi 5G SISO (Ant 4) + Bluetooth (Ant 4) Index 2 (SDB) WiFi 5G SISO (Ant 4) + Bluetooth (Ant 3) WiFi 6E SISO (Ant4) + Bluetooth (Ant4) WiFi 6E SISO (Ant4) + Bluetooth (Ant3) WWAN + WiFi WWAN + WiFi 2.4G SISO (Ant4 or Ant3) Index 3 Index 3 WWAN + WiFi 2.4G MIMO/CDD (Ant4+3) WWAN + WiFi 5G MIMO (Ant4+3) WWAN + WiFi 6E MIMO (Ant4+3) WWAN + WiFi 2.4G SISO (Ant3) + WiFi 5G SISO(Ant4) Index 4 (SDB) WWAN + WiFi 2.4G SISO (Ant3) + WiFi 6E SISO(Ant4) WWAN + BT WWAN + Bluetooth (Ant4) Index 1 WWAN + Bluetooth (Ant3) WWAN + WiFi +BT WWAN + WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant4) Index 3 Index 1 WWAN + WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant3) WWAN + WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant4) WWAN + WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant3) WWAN + WiFi 5G SISO (Ant 4) + Bluetooth (Ant 4) Index 4 WWAN + WiFi 5G SISO (Ant 4) + Bluetooth (Ant 3) WWAN + WiFi 6E SISO (Ant4) + Bluetooth (Ant4) WWAN + WiFi 6E SISO (Ant4) + Bluetooth (Ant3) Page : F2 of F60 FCC SAR TEST REPORT Report No. :FA550731B Exposure Condition Tx mode Capable TX Configurations WWAN Power Index WiFi Power Index BT Power Index Body WWAN standalone WWAN Index 5 WiFi standalone WiFi 2.4G SISO (Ant4 or Ant3) Index 5 WiFi 2.4G MIMO/CDD (Ant4+3) WiFi 5G MIMO (Ant4+3) WiFi 6E MIMO (Ant4+3) WiFi 2.4G SISO (Ant3) + WiFi 5G SISO (Ant4) Index 6 (SDB) WiFi 2.4G SISO (Ant3) + WiFi 6E SISO (Ant4) BT standalone Bluetooth (Ant4) Index 2 Bluetooth (Ant3) WiFi +BT WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant4) Index 5 Index 4 WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant3) WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant4) WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant3) WiFi 5G SISO (Ant 4) + Bluetooth (Ant 4) Index 6 WiFi 5G SISO (Ant 4) + Bluetooth (Ant 3) WiFi 6E SISO (Ant4) + Bluetooth (Ant4) WiFi 6E SISO (Ant4) + Bluetooth (Ant3) WWAN + WiFi WWAN + WiFi 2.4G SISO (Ant4 or Ant3) Index 6 / Index 4 (Hotspot) Index 7 WWAN + WiFi 2.4G MIMO/CDD (Ant4+3) WWAN + WiFi 5G MIMO (Ant4+3) WWAN + WiFi 6E MIMO (Ant4+3) WWAN + WiFi 2.4G SISO (Ant3) + WiFi 5G SISO(Ant4) Index 8 (SDB) WWAN + WiFi 2.4G SISO (Ant3) + WiFi 6E SISO(Ant4) WWAN + BT WWAN + Bluetooth (Ant4) Index 6 / Index 4 (Hotspot) Index 3 WWAN + Bluetooth (Ant3) WWAN + WiFi +BT WWAN + WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant4) Index 6 / Index 4 (Hotspot) Index 9 Index 5 WWAN + WiFi 5G MIMO (Ant4+3) + Bluetooth (Ant3) WWAN + WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant4) WWAN + WiFi 6E MIMO (Ant4+3) + Bluetooth (Ant3) WWAN + WiFi 5G SISO (Ant 4) + Bluetooth (Ant 4) Index 8 WWAN + WiFi 5G SISO (Ant 4) + Bluetooth (Ant 3) WWAN + WiFi 6E SISO (Ant4) + Bluetooth (Ant4) WWAN + WiFi 6E SISO (Ant4) + Bluetooth (Ant3) General Note: 1. This device WLAN 2.4GHz / 5.2GHz / 5.8GHz and WLAN 6GHz VLP supports Hotspot operation and Bluetooth support tethering applications. 2. The worst case reported SAR from each transmit antennas were using for SAR summation. Therefore, the following summations represent the absolute worst cases for simultaneous transmission configuration. 3. The SAR summation is calculated based on the same exposure configuration and test position from each transmit antenna worst case reported SAR results. 4. Per KDB 447498 D01v06, simultaneous transmission SAR is compliant if, i) Scalar SAR summation < 1.6W/kg. ii) SPLSR = (SAR1 + SAR2)^1.5 / (min. separation distance, mm), and the peak separation distance is determined from the square root of [(x1-x2) 2 + (y1-y2) 2 + (z1-z2) 2 ], where (x1, y1, z1) and (x2, y2, z2) are the coordinates of the extrapolated peak SAR locations in the zoom scan. iii) If SPLSR ≤ 0.04, simultaneously transmission SAR measurement is not necessary. iv) Simultaneously transmission SAR measurement, and the reported multi-band SAR < 1.6W/kg. Page : F3 of F60 FCC SAR TEST REPORT Report No. :FA550731B F.2 5G NR + LTE + WLAN + BT Sim-Tx analysis Samsung proprietary TAS feature manages transmitting power effectively in real time and ensures that overall average RF exposure from 3G/4G/5G NR WWAN including NTN, 5GNR EN-DC, and LTE/FR1 intra-band/inter-band uplink CA are in compliance with RF Exposure requirements, while the RF exposure from 2G and WLAN/BT radios is managed using the legacy approach, i.e., through a fixed power back-off if needed. The test device features a TAS function to keep average RF exposure below the given limit for all cases while allowing temporarily high power transmission for better performance For the 5GNR EN-DC, the power ratio factors are g1 and g2 for LTE and NR respectively. The purpose of these power ratio factors is to split the available SAR budget among different RATs, so g1 + g2 ≤ 1. The value of g1 is computed based on the need of the anchor (LTE) and can be changed if the anchor changes its power request. Based on the SAR Budget portion allocated to the anchor, the value of g2 will be computed. At steady state (where all RATs are being on for a while), the allocated power ratio factors will guarantee that the total exposure ratio never exceeds the highest exposure of either one. g1* LTEexposure + g2* NRexposure ≤ 1.0, then, g1* LTEexposure + g2* NRexposure ≤ max ( LTEexposure , NRexposure ) In simultaneous transmission for this device, 5G NR and LTE transmission are managed and controlled by Samsung S.LSI TAS, while the RF exposure from WLAN, BT radios are managed usi…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page : E1 of E5 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. : FA550731B Appendix E. Power reduction mechanism verification 1. Power verification introduction ⚫ This device supports the manufacturer’s proprietary power reduction mechanisms for cellular and Wi- Fi transmitters. Further details of the specific mechanisms for the power reduction mechanism can be found in the Operational Description ⚫ Demonstration of proper functioning of the detection and triggering mechanisms to support the corresponding RF exposure conditions, the verification plan consists of measuring the power levels of the cellular and Wi-Fi transmitters at each wireless technology under different operating conditions related to the power reduction mechanisms. ⚫ This device incorporates the WWAN TAS algorithm feature and through under varying Tx power transmission scenarios in real-time to maintain the time-averaged Tx power compliant with FCC RF exposure requirement. In this power validation purpose is to demonstrate of proper functioning of the detection and triggering mechanisms to support the corresponding RF exposure conditions. In order to avoid real-time TX power varying may affect monitor output power related to the power reduction mechanisms, therefore WWAN real-time TX power varying was disabled and keep in static output power for power reduction mechanism validation. ⚫ For testing purposes, the device was measured against each Index supported for the cellular and Wi- Fi technologies. The target power level and measured power levels are detailed in the following table and clearly shows that each power reduction mechanism operates as expected. 2. Power verification procedure ⚫ The verification is through a base station simulator is used to establish a conducted RF connection and record output power under different operating conditions related to the power reduction mechanisms. ⚫ Verification of power reduction levels for Wi-Fi is performed with cellular transmitters on and off, for cellular is performed with Wi-Fi transmitters on and off. ⚫ Verification of RCV mechanism is via establish voice call and audio routed through the earpiece to record output power under head power states. ⚫ Verification of Hotspot power reduction is via establish data connection and enable hotspot feature to record output power under hotspot power state. ⚫ Verification of Body Detector mechanism is via establish data connection to record output power under body worn power state. ➢ On a stationary object (placed on a table) ➢ In-hand or on knee ➢ Body detect and monitor period validation TEL : 886-3-327-3456 Page : E2 of E5 FAX : 886-3-328-4978 FCC SAR TEST REPORT Report No. : FA550731B 3. Test setup for conducted power measurement 4. Verification output Power Results Head exposure conditions Head Exposure condition Output Power for Voice Call Ear acoustic output Status: ON ON WiFi Status: OFF ON Power state WWAN Index 2 WWAN Index 3 Wireless technology Antenna Measured (dBm) Max. Tune-up (dBm) Measured (dBm) Max. Tune-up (dBm) GSM850 (Voice) Ant 0 31.95 33.50 31.91 33.50 Ant 1 31.41 33.10 26.58 28.30 UMTS Band 5 Ant 0 24.85 25.50 24.86 25.50 Ant 1 22.48 23.70 18.32 19.60 LTE Band 7 (FDD) Ant 2 22.85 23.20 21.07 21.70 Ant 0 23.08 24.60 23.07 24.60 LTE Band 26 (FDD) Ant 0 24.39 25.50 24.39 25.50 Ant 1 21.79 22.00 17.35 18.00 LTE Band 41 (TDD) PC3 Ant 2 23.41 24.10 21.89 22.60 Ant 0 23.75 24.60 23.75 24.60 NR SA n7 Ant 2 22.64 23.40 21.24 21.90 Ant 0 23.80 24.60 23.42 24.60 Head Exposure condition Output Power for Voice Call Ear acoustic output Status: ON ON WWAN Status: OFF ON Power state WIFI Index 1 WIFI Index 3 Wireless technology Antenna Measured (dBm) Max. Tune-up (dBm) Measured (dBm) Max. Tune-up (dBm) WiFi 802.11g (CH6) (Ant4+3)Ant 4 14.62 15.…

Text truncated - open the document above for the full version.