A4RGP4BCPhone

Regulatory Information Regulatory information, certification, and compliance marks specific to your phone can be found under Settings > About Phone > Regulatory labels. EMC Compliance Statement Important: This device and in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Wireless Charging Your phone may be charged with a Qi-compliant or Google approved wireless charger. Do not place other metallic or magnetic objects between the wireless charger and your phone, as this could cause heating of the other object or cause your device not to charge properly. Examples of such objects include coins, jewelry, SIM tray tools and credit cards. If using a phone case that is metallic or magnetic, remove the case prior to wireless charging as this may cause the device or charger to overheat or cause the device not to charge properly. When using Battery Share, this equipment should be operated with a minimum distance of 20cm between the device and your body. Regulatory Information: United States FCC Regulatory Compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Google could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1. These devices may not cause harmful interference. 2. These devices must accept any interference received, including interference that may cause undesired operation. Model: GP4BC Responsible Party: Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 g.co/pixel/support Hearing Aid Compatibility (HAC) Your device has been evaluated and certified to be compatible with hearing aids per technical specification ANSI C63.19. There are two measures of HAC: M rating, which is a measure of immunity to radio frequency interference for acoustic coupling hearing aids; and T rating, which is a measure of performance when used with an inductive coupling (telecoil) hearing aid. Your phone is rated M3/T4, according to the FCC's HAC regulations for wireless devices. Per FCC rules, a mobile phone is considered hearing aid compatible if rated M3 or M4 for acoustic coupling or T3 or T4 for inductive coupling. Your phone has been tested and rated for use with hearing aids for some of the wireless technologies that they use. However, there may be some newer wireless technologies used in these phones that have not yet been tested for use with hearing aids. It is important to try the different features of your phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Google for information on HAC. If you have questions about return or exchange policies, consult your service provider or phone retailer. Radio Frequency (RF) Exposure This device has been evaluated and meets the applicable regulatory requirements for exposure to radio waves and is designed and manufactured not to exceed the applicable emission limits for exposure to RF energy. You can learn more about RF exposure at g.co/pixel/RFE and on your device under Settings > About phone > Safety & regulatory manual Your phone complies with RF specifications when used near your ear or at a distance of 0.4 in (1.0 cm) from your body. To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or other similar accessories. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. Keep the device away from your body to meet the distance requirement. You can find the Specific Absorption Rate (SAR) values applicable to each of those jurisdictions on your device: Settings > About phone > Regulatory labels. Radio Frequency Interference Observe rules that prohibit the use of wireless technology (e.g. cellular, Wi-Fi or UWB). Your device is designed to comply with regulations governing radio frequency emissions but use of wireless devices can negatively affect other electronic equipment. For example, while flying in an aircraft or immediately before boarding, use your wireless device only according to instructions provided by the airline. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal. To turn off your UWB or other radios, turn on airplane mode from the setting menu. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 May 15, 2022 Subject:Request for Confidentiality FCC ID:A4RGP4BC To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 C.F.R. §§ 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. ● Schematic Diagram ● Block Diagram ● Theory of Operation (Operational and Technical Descriptions) ● Tune Up Procedure In support of this request, we provide the following information: 1.Identificationofthespecificinformationforwhichconfidentialtreatmentissought(§0.459(b)(1)):We requestthatalloftheinformationcontainedintheabove-referencedexhibitstothecertificationapplicationbe withheld from routine public disclosure. 2.IdentificationoftheCommissionproceedinginwhichtheinformationwassubmittedoradescriptionofthe circumstancesgivingrisetothesubmission(§0.459(b)(2)):Thematerialisbeingsubmittedinconnectionwith our certification application for the above-captioned FCC ID. 3.Explanationofthedegreetowhichtheinformationiscommercial,orfinancialorcontainsatradesecretor isprivileged(§0.459(b)(3)):Themarketforthetechnologythatisthesubjectofthecertificationapplicationis highlycompetitive,withnumerouscompaniescompetingforthebusinessofpotentialcustomers.Were competitorstobecomeawareofthefactssetforthintheabove-referencedexhibitstotheapplicationatthistime, itcouldhaveanadverseimpactonourcompetitivestandinganddepriveusofthemarketplacebenefitwe otherwisemightachievebyvirtueofhavingtheproductavailablebeforeothercompetitors.Ifanyofthe informationforwhichconfidentialtreatmentissoughtwasmadepubliclyavailable,competitorscouldreasonably determine the scope and status of our activities. 4.Explanationofthedegreetowhichtheinformationconcernsaservicethatiscompetitive(§0.459(b)(4)): Thetechnologythatisthesubjectofthecertificationapplicationissubjecttointensecompetitionfromother manufacturers and service providers that are developing competing services and technology. 5.Explanationofhowdisclosureoftheinformationcouldresultinsubstantialcompetitiveharm(§ 0.459(b)(5)):Asnotedabove,wereourcompetitorstobecomeawareofthefactssetforthinthe above-referencedexhibitstotheapplication,itcouldhaveanadverseimpactonourcompetitivestandingand depriveusofthemarketplacebenefitweotherwisewouldachievebyvirtueofhavingtheproductavailablebefore other providers. 6.Identificationofanymeasurestakenbytherequestingpartytopreventunauthorizeddisclosure(§ 0.459(b)(6)):Theinformationcontainedintheabove-referencedexhibitstothecertificationapplicationhasbeen strictlycontrolledbyus,withdistributionlimitedtointernaluseonlyandforthespecificpurposeofconducting research, development, and testing of the technology. 7.Identificationofwhethertheinformationisavailabletothepublicandtheextentofanyprevious disclosuresoftheinformationtoanythirdparties(§0.459(b)(7)):Theinformationthatwerequestbe maintainedasconfidentialisnotavailablepublicly.Theinformationhasbeenprotectedandkeptconfidentialby limiting external contacts to privileged and confidential communications. 8.Justificationoftheperiodduringwhichthesubmittingpartyassertsthatmaterialshouldnotbeavailable forpublicdisclosure(§0.459(b)(8)):Giventhecompetitivenatureofthemarketplace,anydisclosurethatwe havedevelopedthetechnologydiscussedintheabove-referencedexhibitstothecertificationapplicationwould harmourcompetitiveposition.Theinformationsubjecttothisrequestforconfidentialityshouldnotbemade available for public disclosure at any time. In addition, pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we also request that the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180days after the grant date. ● External Photos ● Internal Photos ● Test Setup Photos ● User Manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, ____________________________________ Dominik Mente Regulatory Compliance Program Manager Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 2

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 May 20, 2022 Subject: Declaration - MIF for HAC RF Interference Evaluation FCC ID:A4RGP4BC To Whom It May Concern: Google LLC hereby declares that the MIF values detailed below are based on worst-case operating modes for all air interfaces for which the HAC M rating is provided based on the current methodology for determining MIF values. UIDCommunication System NameMIF(dB) 10021GSM-FDD(TDMA,GMSK)3.63 10025EDGE-FDD (TDMA, 8PSK, TN 0)3.75 10460UMTS-FDD(WCDMA, AMR)-25.43 10225UMTS-FDD (HSPA+)-20.39 10170LTE-FDD(SC-FDMA,1RB,20MHz,16-QAM)-9.76 10173LTE-TDD (SC-FDMA, 1 RB, 20 MHz, 16-QAM)-1.44 107695G NR (CP-OFDM, 1 RB, 15 MHz, QPSK, 15 kHz)-12.08 107975G NR (CP-OFDM, 1 RB, 40 MHz, QPSK, 30 kHz)-14.32 109005G NR (DFT-s-OFDM, 1 RB, 20 MHz, QPSK, 30 kHz)-16.68 109325G NR (DFT-s-OFDM, 1 RB, 25 MHz, QPSK, 15 kHz)-15.06 10061IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 Mbps)-2.02 10077IEEE 802.11g WiFi 2.4 GHz (DSSS/OFDM, 54 Mbps)0.12 10427IEEE 802.11n (HT Greeneld, 150 Mbps, 64-QAM)-13.44 10069IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 Mbps)-3.15 10616IEEE 802.11ac WiFi (40MHz, MCS0, 90pc duty cycle)-5.57 10671IEEE 802.11ax (20MHz, MCS0, 90pc duty cycle)-5.58 Sincerely yours, ____________________________ Dominik Mente Regulatory Compliance Program Manager Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Date: May 15, 2022 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4RGP4BC To Whom It May Concern: I, the undersigned, hereby authorize Sporton International Inc. (Sporton) to act on Google LLC’s (Google) behalf in all manners relating to the above-captioned application for equipment authorization, including signing of all documents relating to this matter. Any and all acts carried out by Sporton on Google’s behalf shall have the same effect as acts of Google’s own. I,theundersigned,herebycertifythatGoogleisnotsubjecttoadenialoffederalbenefits, includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.§853(a). InauthorizingSportonasGoogle’srepresentative,Googlerecognizesthatitisstillresponsible for: a)complying with the relevant provisions of the certification program; b)making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)making claims regarding certification only in respect of the scope for which certification has been granted; d)not using the product certification in such a manner as to bring Sporton into disrepute and not making any statement regarding the product certification that Sporton may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and returning any certification documents as required by Sporton; f)using the certification only to indicate that the products are certified as being in conformity with specified standards; g)endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner; h)ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Sporton’s requirements; i)keeping a record of all complaints made known to Google relating to the product’s compliance with the requirements of the relevant standard and making these records available to the applicable authorities when requested; j)taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; and k)documenting the actions taken. This authorization is valid until further written notice from Google. Sincerely yours, ____________________________________ Dominik Mente Regulatory Compliance Program Manager Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 2

PHOTOGRAPHS OF EUT Page Number : 1 of 6 1. External Photograph of EUT PHOTOGRAPHS OF EUT Page Number : 2 of 6 PHOTOGRAPHS OF EUT Page Number : 3 of 6 PHOTOGRAPHS OF EUT Page Number : 4 of 6 PHOTOGRAPHS OF EUT Page Number : 5 of 6 PHOTOGRAPHS OF EUT Page Number : 6 of 6 ─────THE END────

E-label Declaration FCC ID: A4RGP4BC FCC §2.935 Electronic labeling of radiofrequency devices. (a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device. InformationOn e-labelIn Manual FCC ID numberYesNo 15.19 Statement(“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.”) NoYes Class B Digital Device user manual statementNoYes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment NoYes Image of the e-label screen is provided below: (b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related website, if such a web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification. The instruction on how to access the information is in the box in the Safety/Warranty/Regulatory booklet, and in the online version of the Safety/Warranty/Regulatory booklet: “ Regulatory information, certification, and compliancemarks can be found with the following steps from the Home screen:Settings > Aboutphone > Regulatory labels.” (c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access. No special accessories or supplemental plug-ins are required to access the information. To access the e-label information, in the device from the Home screen: Select: Settings > About phone > Regulatory labels (d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification. Yes (e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. (f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled, either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a webpage that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCC’s equipment authorization requirements. Devices can be labeled with a stick-on label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The FCC ID is present on the product packaging.

PHOTOGRAPHS OF EUT Page Number : 1 of 5 1. Internal Photograph of EUT PHOTOGRAPHS OF EUT Page Number : 2 of 5 PHOTOGRAPHS OF EUT Page Number : 3 of 5 PHOTOGRAPHS OF EUT Page Number : 4 of 5 PHOTOGRAPHS OF EUT Page Number : 5 of 5 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 25 FAX : 886-3-328-4978 Issued Date : Jun. 06, 2022 Form version: 210422 HAC RF EMISSIONS TEST REPORT Report No. : HA1O2919-06A HEARING AID COMPATIBILITY RF EMISSIONS TEST REPORT FCC ID : A4RGP4BC Equipment : Phone M-Rating : M3 Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC 47 CFR §20.19 ANSI C63.19-2011 The product was received on Apr. 08, 2022 and testing was started from May. 08, 2022 and completed on May. 08, 2022. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in ANSI 63.19-2011 / 47 CFR Part 20.19 and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 25 FAX : 886-3-328-4978 Issued Date : Jun. 06, 2022 Form version: 210422 HAC RF EMISSIONS TEST REPORT Report No. : HA1O2919-06A Table of Contents 1. General Information ................................................................................................................................................... 4 2. Testing Location ......................................................................................................................................................... 5 3. Applied Standards ..................................................................................................................................................... 5 4. RF Audio Interference Level ...................................................................................................................................... 5 5. Air Interface and Operating Mode............................................................................................................................. 6 6. Measurement System Specification ......................................................................................................................... 7 6.1 E-Field Probe System ....................................................................................................................................... 7 6.2 Data Storage and Evaluation ............................................................................................................................ 8 7. RF Emissions Test Procedure................................................................................................................................... 9 8. Test Equipment List ..................................................................................................................................................12 9. Measurement System Validation .............................................................................................................................13 10. Modulation Interference Factor................................................................................................................................14 11. Low-power Exemption ..............................................................................................................................................15 12. Conducted RF Output Power (Unit: dBm) ...............................................................................................................19 13. HAC RF Emission Test Results ................................................................................................................................22 14. Uncertainty Assessment ..........................................................................................................................................24 15. References .................................................................................................................................................................25 Appendix A. Plots of System Performance Check Appendix B. Plots of RF Emission Measurement Appendix C. DASY Calibration Certificate Appendix D. Test Setup Photos Appendix E. UID specifications for HAC RFE TEL : 886-3-327-3456 Page : 3 of 25 FAX : 886-3-328-4978 Issued Date : Jun. 06, 2022 Form version: 210422 HAC RF EMISSIONS TEST REPORT Report No. : HA1O2919-06A History of this test report Report No. Version Description Issued Date HA1O2919-06A Rev. 01 Initial issue of report Jun. 06, 2022 TEL : 886-3-327-3456 Page : 4 of 25 FAX : 886-3-328-4978 Issued Date : Jun. 06, 2022 Form version: 210422 HAC RF EMISSIONS TEST REPORT Report No. : HA1O2919-06A 1. General Information Product Feature & Specification Applicant Name Google LLC Equipment Name Phone FCC ID A4RGP4BC S / N 23231FDH300006 Frequency Band GSM850: 824.2 MHz ~ 848.8 MHz GSM1900: 1850.2 MHz ~ 1909.8 MHz WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 48: 3550 MHz ~ 3700 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12 : 699 MHz ~ 716 MHz 5G NR n14 : 788 MHz ~ 798 MHz 5G NR n25 : 1850 MHz ~ 1915 MHz 5G NR n30 : 2305 MHz ~ 2315 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n48 : 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz 5G NR …

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page 1 of 27 FAX : 886-3-328-4978 Issued Date : Jul. 28, 2022 Template version: 211220 FCC SAR TEST REPORT Report No. : FA1O2919-06D FCC SAR TEST REPORT FCC ID : A4RGP4BC Equipment : Phone Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Mar. 21, 2022 and testing was started from Apr. 22, 2022 and completed on Jul. 26, 2022. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. EMC & Wireless Communications Laboratory No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 27 FAX : 886-3-328-4978 Issued Date : Jul. 28, 2022 Template version: 211220 FCC SAR TEST REPORT Report No. : FA1O2919-06D Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Data Reuse Approach ................................................................................................................................................... 5 3. Model Difference Information ....................................................................................................................................... 5 4. Reference detail Section ............................................................................................................................................... 6 5. Guidance Applied .......................................................................................................................................................... 7 6. Equipment Under Test (EUT) Information ................................................................................................................... 8 6.1 General Information ............................................................................................................................................... 8 7. RF Exposure Limits....................................................................................................................................................... 9 7.1 Uncontrolled Environment ...................................................................................................................................... 9 7.2 Controlled Environment .......................................................................................................................................... 9 8. Specific Absorption Rate (SAR) ................................................................................................................................. 11 8.1 Introduction ...........................................................................................................................................................11 8.2 SAR Definition .......................................................................................................................................................11 9. System Description and Setup .................................................................................................................................. 12 9.1 Test Site Location ................................................................................................................................................. 12 9.2 E-Field Probe ....................................................................................................................................................... 13 9.3 Data Acquisition Electronics (DAE) ...................................................................................................................... 13 9.4 Phantom ............................................................................................................................................................... 14 9.5 Device Holder....................................................…

Text truncated - open the document above for the full version.