A4RGZRNLInteractive Media Streaming Device

Let’s get started 1.Plug in Chromecast Plug your Chomecast into a power outlet and an HDMI port on yout TV 2.Switch TV Input Turn on your TV and switch to the input/source your Chromecast is plugged into 3.Put batteries in your voice remote You will find batteries in the box 4.Get the Google Home App

Safety, Warranty & Regulatory Guide This booklet provides important safety, regulatory, and warranty information that you should read before using your device. You can find an online version of this document at ​XXXX Basic safety WARNING: HEALTH AND SAFETY INFORMATION, READ BEFORE USE To avoid damaging your device, accessories, or any connected devices and to reduce the risk of personal injury, discomfort, property damage or other potential hazards, follow the precautions below and those found in the device Safety Information at ​XXXXX​: ●Handle your device with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture them. Be sure the power adapter and device are well ventilated when in use. Using a damaged device ​damaged cables or power adapter, or using when moisture or debris is present,​ may cause overheating, ​fire, electric shock, injury or damage to your device or other ​property​. Do not expose your device to liquids, which can cause a short circuit and overheating. Do not power the device when wet or in direct sunlight. ●Only power this device with the included power adapter and cable or compatible accessories available on the Google Store or at Google authorized resellers (look for Google’s “made for” badge). Failure to use compatible accessories can cause fire, electric shock, injury, or damage to the device and the accessories. ●Strangulation hazard. This device is not a toy. Children have strangled on cords. Keep the cords out of the reach of children (more than 3 feet / 1 meter away). Disposal & Recycling Dispose of your device, batteries and accessories according to local environmental regulations. Do not dispose of them in normal household waste. ​ ​For more information on recycling your device, batteries and accessories, visit XXXXX Service & Support [US Version & ROW Version] For online help and support, visit XXXXX. If you send your device in for service, you might receive a replacement. Repair or replacement may result in the loss of user-generated data. 1 DRAFT Regulatory information RADIO FREQUENCY EXPOSURE For the device, maintain a distance of 20 cm (8 inches) from your body to be consistent with how the device is tested for compliance with RF exposure requirements. Manufacturer address: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043. [USE FOR UNITED STATES & CANADA] FCC & ISED CANADA REGULATORY COMPLIANCE U.S. contact information: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043 Contact: XXXXX Model number: GZRNL Product name: Google Interactive Media Streaming Device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Google could void your authority to operate the equipment. 2 DRAFT This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: 1. These devices may not cause harmful interference. 2. These devices must accept any interference received, including interference that may cause undesired operation. Industry Canada, Class B This Class B digital apparatus complies with ​CAN ICES-3(B)/NMB-3(B) Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Notice: The Industry Canada regulations provide that changes or modifications not expressly approved by Google could void your authority to operate this equipment. This device complies with ​ISED ​license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Specific Absorption Rate (SAR) Information The radiated output power of this device is below the Industry Canada (IC) radio frequency exposure limits. These devices have been evaluated for and shown compliant with the IC Radio Frequency (RF) Exposure limits. These devices should be used in a manner such that the potential for human contact during normal operation is minimized. This device has been certified for use in Canada. Status of the listing in the ISED’s (Radio Equipment List) can be found at the following web address: http://ww…

Text truncated - open the document above for the full version.

1600 Amphitheatre Parkway Mountain View, CA 94043 USA April 29, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: A4RGZRNL To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 C.F.R. §§ 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. ●Schematic Diagram ●Block Diagram ●Theory of Operation (Operational and Technical Descriptions) ●Software Operation Description ●Antenna Pattern In support of this request, we provide the following information: 1.Identification of the specific information for which confidential treatment is sought (§ 0.459(b)(1)): We request that all of the information contained in the above-referenced exhibits to the certification application be withheld from routine public disclosure. 2.Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission (§ 0.459(b)(2)): The material is being submitted in connection with our certification application for the above-captioned FCC ID . 3.Explanation of the degree to which the information is commercial, or financial or contains a trade secret or is privileged (§ 0.459(b)(3)): The market for the technology that is the subject of the certification application is highly competitive, with numerous companies competing for the business of potential customers. Were competitors to become aware of the facts set forth in the above-referenced exhibits to the application at this time, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise might achieve by virtue of having the product available before other competitors. If any of the information for which confidential treatment is sought was made publicly available, competitors could reasonably determine the scope and status of our activities. 4.Explanation of the degree to which the information concerns a service that is competitive (§ 0.459(b)(4)): The technology that is the subject of the certification application is subject to intense 1 competition from other manufacturers and service providers that are developing competing services and technology. 5.Explanation of how disclosure of the information could result in substantial competitive harm (§ 0.459(b)(5)): As noted above, were our competitors to become aware of the facts set forth in the above-referenced exhibits to the application, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise would achieve by virtue of having the product available before other providers. 6.Identification of any measures taken by the requesting party to prevent unauthorized disclosure (§ 0.459(b)(6)): The information contained in the above-referenced exhibits to the certification application has been strictly controlled by us, with distribution limited to internal use only and for the specific purpose of conducting research, development, and testing of the technology. 7.Identification of whether the information is available to the public and the extent of any previous disclosures of the information to any third parties (§ 0.459(b)(7)): The information that we request be maintained as confidential is not available publicly. The information has been protected and kept confidential by limiting external contacts to privileged and confidential communications. 8.Justification of the period during which the submitting party asserts that material should not be available for public disclosure (§ 0.459(b)(8)): Given the competitive nature of the marketplace, any disclosure that we have developed the technology discussed in the above-referenced exhibits to the certification application would harm our competitive position. The information subject to this request for confidentiality should not be made available for public disclosure at any time. In addition, pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we also request that the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. ●External Photos ●Internal Photos ●Test Setup Photos ●User Manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 T: 650-203-0646 E: [email protected] 2

1600 Amphitheatre Parkway Mountain View, CA 94043 USA Date: April 29, 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4RGZRNL To Whom It May Concern: I, the undersigned, hereby authorize Sporton International Inc. (Sporton) to act on Google LLC’s (Google) behalf in all manners relating to the above-captioned application for equipment authorization, including signing of all documents relating to this matter. Any and all acts carried out by Sporton on Google’s behalf shall have the same effect as acts of Google’s own. I, the undersigned, hereby certify that Google is not subject to a denial of federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 853(a). In authorizing Sporton as Google’s representative, Google recognizes that it is still responsible for: a) complying with the relevant provisions of the certification program; b)making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)making claims regarding certification only in respect of the scope for which certification has been granted; d)not using the product certification in such a manner as to bring Sporton into disrepute and not making any statement regarding the product certification that Sporton may consider misleading or unauthorized; e)upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and return any certification documents as required by Sporton; f) using the certification only to indicate that the products are certified as being in conformity with specified standards; g) endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner; h)ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Sporton’s requirements; i)keeping a record of all complaints made known to Google relating to the product’s compliance with the requirements of the relevant standard and making these records available to the applicable authorities when requested; j)taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; and k)documenting the actions taken. This authorization is valid until further written notice from Google. Sincerely Yours, John McNulty Head of Safety and Compliance Engineering Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 T: 650-203-0646 E: [email protected] 2

PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 1 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 720510 External Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 2 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 3 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 4 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 5 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 6 of 6 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 ─────THE END────

Label Artwork and Location FCC ID: A4RGZRNL IC ID: 10395A-GZRNL

PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 1 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 720510 Internal Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 2 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 3 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 4 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 5 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 6 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 7 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP971035-01 Model Name: GZRNL TEL : 886-3-327-3456 Page Number : 8 of 8 FAX : 886-3-328-4978 Issued Date : Apr. 20, 2020 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 RF EXPOSURE EVALUATION REPORT FCC ID : A4RGZRNL Equipment : Interactive Media Streaming Device Model Name : GZRNL Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part 2.1091 and it complies with applicable limit. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 7 TEL : 886-3-327-3456 Page : 3 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 History of this test report Report No. Version Description Issued Date FA971035-01 Rev. 01 Initial issue of report Apr. 21, 2020 FA971035-01 Rev. 02 Update BT/BLE tune up Apr. 27, 2020 FA971035-01 Rev. 03 Update Section 2 May 08, 2020 FA971035-01 Rev. 04 Update Tune-up May 12, 2020 TEL : 886-3-327-3456 Page : 4 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Interactive Media Streaming Device Model Name GZRNL FCC ID A4RGZRNL Wireless Technology and Frequency Range WLAN 2.4GHz Band: 2412 MHz ~ 2462 MHz WLAN 5.2GHz Band: 5180 MHz ~ 5240 MHz WLAN 5.3GHz Band: 5260 MHz ~ 5320 MHz WLAN 5.5GHz Band: 5500 MHz ~ 5720 MHz WLAN 5.8GHz Band: 5745 MHz ~ 5825 MHz Bluetooth: 2402 MHz ~ 2480 MHz Mode WLAN: 802.11a/b/g/n/ac HT20 / HT40 / VHT20 / VHT40 / VHT80 Bluetooth BR/EDR/LE HW Version 1 SW Version 9.92.51.11.5 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Reviewed by: Jason Wang Report Producer: Daisy Peng TEL : 886-3-327-3456 Page : 5 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 2. Maximum RF average output power among production units TEL : 886-3-327-3456 Page : 6 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 7 of 7 FAX : 886-3-328-4978 Issued Date : May 12, 2020 Form version: 1900618 RF EXPOSURE EVALUATION REPORT Report No. : FA971035-01 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Frequency (MHz) Antenna Gain (dBi) Maximum Power (dBm) Maximum EIRP (dBm) Maximum EIRP (W) Average EIRP (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) Power Density / Limit 2.4GHz WLAN 2412.0 3.02 18.00 21.020 0.126 126.474 0.025 1.000 0.025 5GHz WLAN 5180.0 4.58 17.00 21.580 0.144 143.880 0.029 1.000 0.029 Bluetooth 2402.0 3.02 7.00 10.020 0.010 10.046 0.002 1.000 0.002 Note: For conservativeness, the lowest frequency of each band is used to determine the MPE limit of that band 4.2. Collocated Power Density Calculation 5GHz WLAN Power Density / Limit Bluetooth Power Density / Limit Σ(Power Density / Limit) of 5GHz WLAN + Bluetooth 0.029 0.002 0.031 Note: 1. 2.4GHz WLAN and Bluetooth cannot transmit simultaneously. 2. Σ(Power Density / Limit): This is a summation of [(power density for each transmitter/antenna included in the simultaneous transmission)/ (corresponding MPE limit)], for 5GHz WLAN + Bluetooth. 3. Considering the EIRP performance listed in the table above, the aggregated (power density /limit) is smaller than 1, and MPE of 2 collocated transmitters is compliant Conclusion: According to 47 CFR §2.1091, the RF exposure analysis concludes that the RF Exposure is FCC compliant.

TEL : 886-3-327-3456 Page Number : 1 of 19 FAX : 886-3-328-4978 Issued Date : Mar. 31, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ971035-01 FCC DFS TEST REPORT FCC ID : A4RGZRNL Equipment : Interactive Media Streaming Device Model Name : GZRNL Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC Part 15 Subpart E The product was received on Jan. 30, 2020 and testing was started from Feb. 10, 2020 and completed on Feb. 10, 2020. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in FCC Part 15 Subpart E and shown compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 19 FAX : 886-3-328-4978 Issued Date : Mar. 31, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ971035-01 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Feature of Equipment Under Test .................................................................................................... 5 1.2 Product Specification of Equipment Under Test ............................................................................... 5 1.3 Modification of EUT .......................................................................................................................... 5 1.4 Testing Site ....................................................................................................................................... 6 1.5 Applied Standards ............................................................................................................................ 6 1.6 Support Unit used in test configuration and system ......................................................................... 6 2 Requirements and Parameters for DFS Test ........................................................................................... 7 2.1 Summary of Dynamic Frequency Selection Test ............................................................................. 7 2.2 Applicability of DFS Requirements ................................................................................................... 8 2.3 Interference Threshold values, Master or Client incorporating In-Service Monitoring ..................... 9 2.4 DFS Response requirement values .................................................................................................. 9 2.5 Short Pulse Radar Test Waveforms ............................................................................................... 10 3 Calibration Setup and DFS Test Results ............................................................................................... 11 3.1 Calibration of Radar Waveform ...................................................................................................... 11 3.2 In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period ................................................................................................................... 13 4 List of Measuring Equipment .................................................................................................................. 19 TEL : 886-3-327-3456 Page Number : 3 of 19 FAX : 886-3-328-4978 Issued Date : Mar. 31, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ971035-01 History of this test report Report No. Version Description Issue Date FZ971035-01 01 Initial issue of report Mar. 31, 2020 TEL : 886-3-327-3456 Page Number : 4 of 19 FAX : 886-3-328-4978 Issued Date : Mar. 31, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ971035-01 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.2 7.8.3 Channel Move Time Pass 0.1488 sec Channel Closing Transmission time Pass <200ms + 0 ms (aggregate) Non-Occupancy Period and Client Beacon Test Pass No transmission or Beacons occurred Note: Since the product is client without radar detection function, only Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period Test are required to be performed. Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Wii Chang Report Producer: Amy Chen TEL : 886-3-327-3456 Page Number : 5 of 19 FAX : 886-3-328-4978 Issued Date : Mar. 31, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ971035-01 1 General Descr…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 28 FAX : 886-3-328-4978 Issued Date : May 05, 2020 Report Template No.: BU5-FR15EWLB4 AC MA Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR971035-01E FCC RADIO TEST REPORT FCC ID : A4RGZRNL Equipment : Interactive Media Streaming Device Model Name : GZRNL Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, California, 94043 USA Standard : FCC Part 15 Subpart E §15.407 The product was received on Jan. 30, 2020 and testing was started from Feb. 03, 2020 and completed on Mar. 25, 2020. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any agency of government. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC…

Text truncated - open the document above for the full version.