A5UTTIVNWMT02KitchenAid Smart Thermometer

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Whirlpool Corporation FRN: 0011042405 Grantee Code: A5U Contact person name: Paul Friis Agent name: Whirlpool Corporation Street address: 2000 N M-63 Benton Harbor, Michigan 49022, United States ZIP/City/State Benton Harbor, Michigan 49022, United States Telephone number: 2692471123 Email address: [email protected] Signature Contact person*: Date: Signature Agent*: Date: Note *Must be signed by both the applicant, and agent on behalf

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_03 06-06-2024 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Certification Application Attestation Statements < Whirlpool Corporation > <FRN:> 0011042405 <adress> 2000 N M-63 Benton Harbor, Michigan 49022, United States <ZIP / Postcode> 49022 <city> <country> Benton Harbor Subject: FCC ID: < A5UTTIVNWMT02 > To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) [Gardena Germany AB] certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) [Insert Company Name Here] (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2025.10.16 City: Benton Harbor Name (2) : Paul Friis Function: Regulatory Affairs, Codes & Standards Lead Telephone number: 2692471123 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 (On manufacturer’s company letter heading) Declaration of Authorization We Name: Whirlpool Corporation Address: 2000 N M-63 Benton Harbor, Michigan City: Benton Harbor Country: United States Declare that: Name Representative of agent: Gao Han (1) Agent Company name: DEKRA Testing and Certification (Shanghai) Co., Ltd. Address: 8F, No. 250, Jiangchangsan Road, 200436 City: Shanghai Country CHINA is authorized to apply for Certification of the following product(s): Product description: KitchenAid Smart Thermometer Type designation: KTH11BM Trademark: KitchenAid Validity/ expiry date on our behalf. Date: 2025.10.16 City: Benton Harbor Name: Paul Friis Function: Regulatory Affairs, Codes & Standards Lead Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 23-06-2023 RF_501, Issue 11 Page 1 of 2 Company Name: Whirlpool Corporation Address: 2000 N M-63 Benton Harbor, Michigan 49022, City: Benton Harbor Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: A5UTTIVNWMT02 Reference number: 6236422 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Product Confidentiality requirement Date: 2025.10.26 Name and signature of applicant: Paul Friis Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

5V 0.35A 0.35Ah 1.3Wh MADE IN VIETNAM FABRIQUÉ AU VIETNAM BT DID: R074360 MOD.: KTH11BM FCC ID: A5UTTIVNWMT02 D096 RATING ARTWORK

DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.China www.dekra.com Test report No: 6223821.51 ASSESSMENT REPORT RF Exposure Evaluation Identification of item tested KitchenAid Smart Thermometer Trademark KitchenAid Model and /or type reference KTH11BM Features USB 5Vdc, 0.35A； Repeater battery : 0.35AH, 1.3Wh FCC ID A5UTTIVNWMT02 ISED Number 10248A-TTIVNWMT02 Applicant ́s name / address Whirlpool Corporation 2000 N M-63 Benton Harbor, Michigan 49022, United States Test method requested, standard FCC CFR Title 47 Part 2 Subpart J Section 2.1093 RSS-102 Issue 5 IEEE Std C95.3:2002 Verdict Summary IN COMPLIANCE Prepared by (name / position & signature) Adrian Shi Technical Supervisor Approved by (name / position & signature) Lei Chen Senior Project Manager Date of issue 2025-10-12 Report template No TRF_MPE_RF01 V1.0 DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.China www.dekra.com Report no.: 6223821.51 Page 2 / 10 INDEX page Competences and Guarantees ........................................................................................................................3 General conditions ..........................................................................................................................................3 Environmental conditions.................................................................................................................................3 Possible test case verdicts...............................................................................................................................4 Definition of symbols used in this test report .....................................................................................................4 Abbreviations..................................................................................................................................................4 Document History ...........................................................................................................................................4 Remarks and Comments .................................................................................................................................5 1 General Information ................................................................................................................................6 1.1 General Description of the Item(s) ..................................................................................................6 1.2 Test date ......................................................................................................................................7 1.3 Test Facility ..................................................................................................................................7 2 Single RF Sources .................................................................................................................................8 2.1 FCC Limit .....................................................................................................................................8 2.2 IC Limit.........................................................................................................................................9 2.3 Result of Exemption .................................................................................................................... 10 DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.China www.dekra.com Report no.: 6223821.51 Page 3 / 10 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. 5. The information provided by the customer in this report may affect the validity of the results, the test lab is not responsible for it. 6. This report will not be used for social proof function in China market. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% Atmospheric pressure 86 kPa – 106 kPa If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.C…

Text truncated - open the document above for the full version.

ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX PagenumberPage 1 of10 ProjectNoCS2304DPCBVersion2820960002_V1.0 TesterQiMoDate2025/7/25 AuditingJinbeiLiDate2025/7/25 ApprovalDate AntennaTestReport ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX PagenumberPage 2 of10 RevisionRecord VersionRevisedcontent Revision Department/Reviewer EffectivedateRemarks V1.0 Xuning、zhuwanli ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page3of10 Contents 1.ProjectInformation....................................................................................................4 2.TechnicalSpecification...............................................................................................5 3.Theshapeandsizeoftheantenna............................................................................6 4.Theresultofthetest..................................................................................................6 4.1VSWR&Returnloss&Smith........................................................................6 4.2AntennaTestingEnvironment.......................................................................7 4.3GainandEfficiency........................................................................................8 4.43DRadiationPattern.....................................................................................9 4.52DRadiationPattern...................................................................................10 ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page4of10 1.ProjectInformation 1.1AntennaCoding ： / 1.2AntennaType：MonopoleAntenna 1.3ModeloftheDUT：Probe 1.4TestData ： 2025.6.13 1.5Productpicture： Product appearance PCBboardand antenna ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page5of10 2.TechnicalSpecification ElectricalSpecifications FrequencyRange2400-2480MHz PeakGain-3.10dBi Efficiency9.52% ReturnLoss≤-1.83dB VSWR ≤ 9.47 Bandwidth80MHz InputImpedance50 Ω RadiationdirectionOmni PolarizationTypeLinear LightningProtectionDCgrounding PowerCapacity1000mW（30dBm） MechanicalSpecifications AntennaSize14.65x11.2mm CoreRadiatorstainlesssteel Substratematerialstainlesssteel Substratethickness/ SubstrateSize(mm)115x35mm Coaxialwire/ ConnectTypeantennashrapnel OperatingTemperature-40to+150°C StorageTemperature-40to+150°C ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page6of10 3.Theshapeandsizeoftheantenna 4.Theresultofthetest 4.1VSWR&Returnloss&Smith ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page7of10 4.2AntennaTestingEnvironment A.TestEquipment：SATIMO，SG24-L，Agilent-E5071C B.TestEngineer：zhuwanli C.TestEnvironment：Themicrowaveunreflectedchamber Frequency(MHz)ReturnLoss(dB)VSWR 2402-1.948.98 2440-1.859.41 2480-1.839.47 Bandwidth80MHz InsidethemicrowaveanechoicchamberProductcoordinateaxisposition ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page8of10 4.3GainandEfficiency A.AntennaEfficiency B.AntennaGain ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page9of10 4.43DRadiationPattern 2402MHz 2440MHz 2480MHz ShenzhenMinew TechnologiesCo.,Ltd. Documenttype DocumentnumberY-YB-CD-002 VersionV001 Antennatestreport Effectivedate20XX/XX/XX Pagenumber Page10of10 4.52DRadiationPattern E1，XZ-Face，phi=0°;（E1，theta=0~360°，phi=0°） E2，YZ-Face，phi=90°;（E2，theta=0~360°，phi=90°） H，XY-Face，theta=90°;（H，phi=0~360°，theta=90°）

DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.China www.dekra.com Test report No: 6223821.50 TEST REPORT Radio Spectrum Matters (RF) Identification of item tested KitchenAid Smart Thermometer Trademark KitchenAid Model and /or type reference KTH11BM Features USB 5Vdc, 0.35A； Repeater battery : 0.35AH, 1.3Wh FCC ID A5UTTIVNWMT02 ISED Number 10248A-TTIVNWMT02 Applicant ́s name / address Whirlpool Corporation 2000 N M-63 Benton Harbor, Michigan 49022, United States Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020+Cor 1-2023+C63.10a-2024 + Errata to c63.10a-2024 RSS-Gen Issue 5 / RSS-247 Issue 3 Verdict Summary IN COMPLIANCE Prepared by (name / position & signature) Adrian Shi Technical Supervisor Approved by (name / position & signature) Lei Chen Senior Project Manager Date of issue 2025-10-12 Report template No TRF_Part15C_247_RF03 V1.0 DEKRA Testing and Certification (Shanghai) Ltd. No.250,Jiangchangsan Road, Shanghai ,200436 P.R.China www.dekra.com Report no.: 6223821.50 Page 2 / 71 INDEX page Competences and Guarantees ........................................................................................................................4 General conditions ..........................................................................................................................................4 Uncertainty .....................................................................................................................................................4 Environmental conditions.................................................................................................................................5 Possible test case verdicts...............................................................................................................................5 Definition of symbols used in this test report .....................................................................................................5 Abbreviations..................................................................................................................................................5 Document History ...........................................................................................................................................6 Remarks and Comments .................................................................................................................................6 1 General Information ................................................................................................................................7 1.1 General Description of the Item(s) ..................................................................................................7 1.2 Test date ......................................................................................................................................8 2 Description of Test Setup ........................................................................................................................9 2.1 Operating mode(s) used for tests ...................................................................................................9 2.2 Support / Auxiliary equipment / unit / software for the EUT ...............................................................9 2.3 Test Configuration / Block diagram used for tests ............................................................................9 3 Verdict summary section ....................................................................................................................... 10 3.1 Standards................................................................................................................................... 10 3.2 Deviation(s) from the Standard(s) / Test Specification(s)................................................................ 10 3.3 Overview of results ..................................................................................................................... 10 3.4 Test Facility ................................................................................................................................ 11 3.5 Measurement procedure.............................................................................................................. 12 4 Test Results......................................................................................................................................... 13 4.1 AC Power Line Conducted Emission ............................................................................................ 13 4.2 Emissions in restricted frequency bands ....................................................................................... 16 4.3 Emissions in non-restricted frequency band .................................................................................. 32 4.4 Duty Cycle.................................................................................................................................. 41 4.5 Radiated Emission Band Edge..................................................................................................... 43 4.6 DTS Bandwidth & Occupied Bandwidth ........................................................................................ 60 4.7 Fundamental emission output power ............................................................................................ 63 4.8 Power Spectral Density ............................................................................................................... 65 4.9 Antenna Requirement ................................................................................................................. 67 5 Identification of the Equipment Under Test ............................................................................................. 68 Annex 1 – Measurement Uncertainty ..........................................................................…

Text truncated - open the document above for the full version.