Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 2 | 24E | 1.93 GHz - 1.99 GHz | 25.12 W | 300KG7W | 90
Hz |
Grant NotesPower output listed is conducted.
The equipment can be configured in both GMSK and 8PSK modulation techniques with following coupling devices:
- Dual Diplexer Module (DDM) with or without Hybrid two way combiner (H2)
- Tx Filter (TxF) with or without Hybrid two way combiner (H2)
To comply with the FCC Rule Part 24 Subpart E spurious emissions requirements, some configurations must be adjusted with the following restrictions for "Tx Filter without H2" and "Dual Diplexer Module (DDM) without H2" using both GMSK and 8PSK modulations: The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing with 2 dB power reduction required for edge channels ARFCN.
The antenna(s) used for this transmitter must be fixed mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3).