AB6NT800FRMA800 MHz CDMA Flexible Radio Module for Base Statio

Proprietary FCC ID AB6NT800FRMA Exhibit E User Documentation Proprietary NORTEL CDMA METRO CELL (MetroDE -- MetroRE) 800/1900 MHz Outdoor Cell Site Requirements Issue 0.02 Document: NORTEL CDMA Metro Cell (MetroDE -- MetroRE) Cell Site Requirements February, 2001 NORTEL Wireless Networks CDMA BTS Radio Development BTS Radio Systems 2M41 Security Warning: The information contained in this document is the property of Northern Telecom Ltd. The holder of this document shall keep all information contained herein confidential and shall protect the same in whole or in part from disclosure and dissemination to all third parties. METRO CELL OUTDOOR (DE/RE)CDMA BTS RADIO DEVELOPMENT PROPRIETARY CELL SITE REQUIREMENTS Feb. 2001- 2 - Issue 01 Stream 00 Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.0Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.0Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.0Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4.0Mechanical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.1Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.2Digital Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.3Digital Enclosure Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.4External Battery Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.4.1FRM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.5General Cabinet Anchoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.6Pad mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.7Rubber Isolation Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5.0AC Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.2AC Power Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6.0 RF Overlay Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6.1Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7.0GPS Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 8.0Connections and Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 8.1FRM Power Connections and Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 8.2FRM Interconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 8.3Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 9.0T1/E1 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 10.0 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 10.1BTS grounding Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 10.2Antenna Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 METRO CELL OUTDOOR (DE/RE) CDMA BTS RADIO DEVELOPMENT PROPRIETARY CELL SITE REQUIREMENTS Issue 01 Stream 00- 3 -Feb. 2001 10.3Radio rack Grounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 10.4Site Ground Ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 11.0 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 METRO CELL OUTDOOR (DE/RE)CDMA BTS RADIO DEVELOPMENT PROPRIETARY CELL SITE REQUIREMENTS Feb. 2001- 4 - Issue 01 Stream 00 1.0 Executive Summary The CDMA Outdoor Metro Cell is a new product development for Nortel’s wireless markets in North America. Metrocell targets the high capacity market. This document details cell site requirements for the Outdoor CDMA Metro Cell product. The Metro Cell can be configured in a 800 MHz, 1900 MHz, or mixed frequency variants. The document addresses initial deployment requirements and also covers future expansion requirements. METRO CELL OUTDOOR (DE/RE) CDMA BTS RADIO DEVELOPMENT PROPRIETARY CELL SITE REQUIREMENTS Issue 01 Stream 00- 5 -Feb. 2001 2.0 Introduction This document outlines the cell site engineering requirements for the CDMA MCBTS 1900 System. Its intended audience is the cell site engineering team who will use this information on the capabilities of the MCBTS to plan the installation of the product at a cell site. the cell site engineering team should have expertise in mechanical, grounding, power, telecom and RF engineering. Specifications in the Product Specification |agreement (PSA) shall take precedence over information in this docum…

Text truncated - open the document above for the full version.

EXHIBIT 13 COVER LETTER 27 East Lake HillP.O. Box 3485 Airdrie, AlbertaAirdrie, Alberta T4B 2B7 T4B 2B7Phone: (403) 912-0037 Fax: (403) 912-0083 24 April, 2002 Office of Engineering & Technology Federal Communications Commission 445 12 St. SW Washington, DC 20554 USA Subject:Certification Application for the Nortel Networks CDMA 800 MHz TRM-2000 in accordance with FCC Part 22 Rules FCC ID: AB6NT800FRMA Our File No.:n01e2240 To Whom It May Concern: Please find the enclosed copy of Report n01e2240 providing you with the required information on a submission by Marin Sampaleanu of Nortel Networks, to be approved in accordance with FCC Part 22 Rules. This submission is made by the Electronics Test Centre, acting as an agent on behalf of Nortel Networks located in Calgary, Alberta, CANADA. The formal application form and all the necessary exhibits are included. If you have any questions regarding this submission, please do not hesitate to contact me. Sincerely, David Raynes Laboratory Supervisor Electronics Test Centre [email protected]

Nortel Networks Limited 5050 40 Street NE Calgary, Alberta, Canada, T3J 4P8 Tel403.769.4781 Fax403.769.7806 [email protected] www.nortelnetworks.com Marin Sampaleanu Technical Advisor Federal Communications Commission 445 12th Street SW. Washington, DC 20554 USA Request for Confidentiality Ref.:FCC ID: AB6NT800FRMA Please be advised that the following documents submitted to FCC contain information which Nortel Networks deems to be proprietary and wishes to be withheld from public inspection. We consider this leading edge technology developed by Nortel as being new technology and we do not wish to be disclosed or made otherwise available to our competition. (i) Circuit Schematics: Exhibit 5 (ii) Block Diagrams: Exhibit 4 If this information were to be made public, it might be used to the disadvantage of the applicant, Nortel Networks. Thank you for taking this matter into consideration, Sincerely, Marin Sampaleanu, P.Eng. Technical Advisor Nortel Networks, Wireless Internet Willowglen Business Park, 8 Manning Close Calgary, Alberta, Canada T2E 7N5 Phone: 403 769 4781, ESN 758 4781 Fax: 403 769 7806, ESN 758 7806 Email:[email protected]

Exhibit 03 External Photos

SHEET 2 of 2 P0941271 STREAM/ ISSUE0001 FULL SCALE 800 FRM TX FCC ID: AB6NT800FRMA CANADA: 332291120A STREAMISSUE APPD DRAWN SCALE B (V2 -FRAMEBUILDER 9511) 654321 DD CC BB AA 65432 INITIAL APPLICATION TITLE DRAWING NUMBER SIZE T H E I N F O R M A T I O N C O N T A I N E D I N T H I S D O C U M E N T I S T H E P R O P E R T Y O F N O R T H E R N T E L E C O M L I M I T E D . E X C E P T A S S P E C I F I C A L L Y A U T H O R I Z E D I N W R I T I N G B Y N O R T H E R N T E L E C O M L I M I T E D , T H E H O L D E R O F T H I S D O C U M E N T : ( 1 ) S H A L L K E E P A L L I N F O R M A T I O N C O N T A I N E D H E R E I N C O N F I D E N T I A L A N D S H A L L P R O T E C T S A M E I N W H O L E O R I N P A R T F R O M D I S C L O S U R E A N D D I S S E M I N A T I O N T O A L L T H I R D P A R T I E S A N D ( 2 ) S H A L L U S E S A M E F O R O P E R A T I N G A N D M A I N T E N A N C E P U R P O S E S O N L Y . 1/1 1 NORTHERN TELECOM SHEET 1 of 2 REGULATORY LABEL 800 FRM P0941271 NTGS85BA JOM AW0002 0 . 6 2 5 NOTE 1 3.000 NORTEL LOGO OXFORG GRAY PER S33477 800 FRM TX FCC ID: AB6NT800FRMA CANADA: 332291120A NOTES: 1. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE EXPRESSED IN INCHES. TOLERANCES SHALL BE: 2 DECIMAL PLACES = +.01 3 DECIMAL PLACES =+.005 ALL LABEL CORNERS SHALL HAVE A .03 RADIUS. 2. THIS DESIGN FILE WAS CREATED IN ACCORDANCE WITH NT STD 1517.20. LABEL/ARTWORKS MUST BE MANUFACTURED IN ACCORDANCE WITH NPS90942. 3. THE ARTWORK (SEE SHEET 2) SHALL BE PLOTTED AT A MINIMUM OF 1200 DPI PER NPS90942. THE TEXT FONT(S) SHALL BE: UNIVERS 67 CONDENSED BOLD PER NPS90942. 4. MATERIAL: .010 CLEAR POLYCARBONATE PER R0115902 FINISH:VELVET/MATTE ADHESIVE: .002 PRESSURE SENSITIVE WITH PEEL OFF LINER PER R0113138 5. COLORS SHALL CONFORM TO NORTHERN TELECOM OBSERVATIONAL STANDARD 2701.01. 6. LABEL TO BE REVERSE SCREEN PRINTED PER NPS90942-2. 7. LABEL TO BE UL-969 APPROVED. EC 102-XXXXX 12/17/2001 BACKGROUND COLOR DOLPHIN LIGHT GRAY PER S-33470 TEXT: UNIVERS 67 OXFORG GRAY PER S-33477 P R O P R I E T A R Y I N F O R M A T I O N :

EXHIBIT Label Photos Applicant: Nortel Networks For Certification on: AB6NT800FRMA FCC Label Photographs igure 1 Nortel Networks, AB6NT800FRMA, FCC Identifier Location igure 2 Nortel Networks, AB6NT800FRMA, FCC Identifier Label F F

This document contains Proprietary Information of Northern Telecom Limited. This information is considered to be CONFIDENTIAL and should be treated appropriately. EXHIBIT 3 Technical Description Applicant: Northern Telecom Ltd. For Type Acceptance/Certification on: AB6NT800FRM Application for Type AcceptancePrepared on: 30 November 1998 FCC ID: AB6NT800FRMPage 3-2 This document contains Proprietary Information of Northern Telecom Limited. This information is considered to be CONFIDENTIAL and should be treated appropriately. 1 MCBTS 800 MHz Flexible Radio Module Hardware Description The 800 MHz FRM is the RF equipment portion of Nortel’s Multi-Carrier BTS product. All the IF and RF circuitry is contained in the FRM. The digital portion of the MCBTS product is contained in a Digital Enclosure (DE). The DE is responsible for the baseband signal processing and control circuitry. 1.1 Brief Description of Digital Equipment Module Figure 1: MCBTS Product Architecture Figure 1 shows the product architecture of the MCBTS and the interfaces between the FRMs and the Digital Enclosure. The DE modules comprise: the Channel Element Module (CEM), COnfiguration REsource module (CORE), Control Module (CM), and Global Positioning System module (GPS). The CEM contains 24 or 48 Channel Elements (CE) on one or two channel cards, CEM Interface circuitry, serial/parallel converters and a power supply. The CCs themselves are identical to the current design with the exception that the analogue output block is removed and Tx and Rx baseband data is transported through serial/parallel conversion circuitry to reduce the interconnect. Baseband digital Rx signals, BCN, and frequency/timing reference from each CORE are via high speed serial copper connections. Baseband DE FRM Application for Type AcceptancePrepared on: 30 November 1998 FCC ID: AB6NT800FRMPage 3-3 This document contains Proprietary Information of Northern Telecom Limited. This information is considered to be CONFIDENTIAL and should be treated appropriately. digital Tx signals to each CORE are via high speed serial copper connections. Power and the Tx/Rx baseband are distributed on a simple shielded backplane. The CORE Module provides the interface between the FRMs and the CEMs. The CORE comprises optical interfaces to the FRMs, baseband signal routing, and timing reference circuitry. Essentially the CORE provides switching, routing, addition and multiplexing of signals between the CEMs and the FRMs. The CORE module can be flexibly programmed to support many different system configurations. The Control Module consists of a BTSC and a BTS Interface (BTSI). The BTSI provides termination of up to 6 T1/E1 ports. The BTSI provides support for the following: • BCN • fractional, daisy-chained (drop and insert), and redundancy (1+1) for the T1/E1 ports The BTSI utilizes an embedded processor to control/monitor the T1/E1 ports, to emulate the CSU interface, and to perform card level maintenance and diagnostics. In addition the BTSI provides the BCN interface to both the BTSC and the CORE modules. The GPS module is the source of frequency reference and timing information for the BTS. The GPS module directly provides reference signals to the CORE module and Control module. Other modules (i.e., CEMs, RFM etc.) receive reference signals indirectly through the CORE module. The GPS module is controlled via an RS-422 port by the BTSC. 1.2 FRM Description A picture of the FRM is shown below and the FRM architecture is shown in Figure 2: Application for Type AcceptancePrepared on: 30 November 1998 FCC ID: AB6NT800FRMPage 3-4 This document contains Proprietary Information of Northern Telecom Limited. This information is considered to be CONFIDENTIAL and should be treated appropriately. Figure 2: 800 MHz FRM Architecture Each FRM can support one CDMA carrier on one sector. However, for compatibility with future multi carrier HPAs, the optical interface is designed for three carrier operation. With single carrier HPAs, multi- frequency operation is achieved using multiple FRMs. Multi-frequency operation necessitates multiple antennas per sector. Multi-faceted antennas or multiple single facet antennas are to provide this functionality. A duplexer/LNA module is required for each antenna. Two carriers in each sector can be supported on a diversity pair of antennas (a diversity pair per sector is the minimum antenna requirement for any CDMA system) in each sector. Within the receiver and upconverter many of the functions (E.G. filtering, Channelization, AGC) are performed digitally. Hence, the FRM interfaces to the digital enclosure are digital. The interface is implemented as a high speed serial digital optical link. The data transmitted over the optical link between the FRM and the CORE comprises Tx and Rx data , OA&M signalling, and frequency and timing reference signals. The micro-controller and associated control circuitry within the FRM performs configuration, fault monitoring and several real time functions (mainly concerned with Tx sector power control) for the RF electronics. LNA Optical I/F Frequency Ref. Recovery μ Controller Up Conv Rx PA RFM α D u p l e x e r LNA P r e s e l e c t o r RF Power detector 2 fibre pairs Application for Type AcceptancePrepared on: 30 November 1998 FCC ID: AB6NT800FRMPage 3-5 This document contains Proprietary Information of Northern Telecom Limited. This information is considered to be CONFIDENTIAL and should be treated appropriately. The frequency reference recovery circuit recovers a frequency reference received over the optical interface with sufficient accuracy and low phase noise to meet ANSI J-STD-008 and IS-95 specifications. A block diagram of the FRM is shown in Figure 3. Figure 3: FRM Block Diagram The FRM interfaces with the Configuration Resource (CORE) module within the digital enclosure (DE) via a completely digital optical link representing both the forward and reverse air interface, and OA&M information. DC power is sup…

Text truncated - open the document above for the full version.

EXHIBIT 10 PARTS LIST/TUNE-UP INFO S A M S T O C K L I S T F O R CONFIDENTIAL – NOT FOR PUBLIC INSPECTION ASSEMBLY NUMBER : NTGS81AC TITLE OF ASSEMBLY : 800MHZ MCBTS TX /RX ASSY CR PCP COMMON PRODUCT CODE : A0841944 SYSTEM : MCBTS FRM DATE : 2001-05-14 ORIG CIL REL EC ---- ---- ---- --------- Y 0010 02 102-25838 PROPRIETARY INFORMATION THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF NORTEL NETWORKS CORP. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY NORTEL NETWORKS CORP., THE HOLDER OF THIS DOCUMENT: (1) SHALL KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES AND (2) SHALL USE SAME FOR OPERATING AND MAINTENANCE PURPOSES ONLY. DOCUMENT INFORMATION ==================== DRAWING NUMBER : SLGS81AC MSL STREAM : 07 ISSUE : 06 ENGINEER : BEVERLY JOHNSTON APPROVED DATE : NORTEL NETWORKS CORP. STOCKLIST REPORT CONFIDENTIAL – NOT FOR PUBLIC INSPECTION SYSTEM : MCBTS FRM PRODUCT : NTGS81AC - 800MHZ MCBTS TX /RX ASSY CR PCP ====== == ======== ========================== ==== =============== ========================== ========================== ==== QTY. UN CPC-CODE ENGINEERING CODE REL SPEC. DESCRIPTION/ COMPONENT ITEM IT PAS PRODUCT NAME DESIGNATION NO ====== == ======== ========================== ==== =============== ========================== ========================== ==== 1.00 EA P0874098 NTGS8101 07 P0874098 800 MCBTS TX/RX MODULE 100 RX/UC PCB 7.00 EA A0322287 CHC0805X7R103J5B NPS00009-1 CAP CER CHIP 10.0NF 5.00% C160,C215,C290,C958,C960, 110 50.0V X7R 0805 C963,C965 53.00 EA A0353467 CHC0603X7R103K5B NPS00009-1 CAP CER CHIP 10.0NF C83-C86,C114,C121,C124, 120 10.00% 50.0V X7R 0603 C166,C187,C194,C195,C201, NICKEL C203,C208,C219,C239,C291, C299,C312,C322,C340,C368, C393,C394,C404,C406,C417, C418,C563,C564,C572,C617, C618,C621,C626-C635,C637, C639,C640,C642,C649,C651, C652,C654,R738 2.00 EA A0319231 CHC0805X7R223J5B NPS00009-1 CAP CER CHIP 22.0NF 5.00% C517,C518 130 50.0V X7R 0805 24.00 EA A0385806 CHC0603X7R473K4B NPS00009-1 CAP CER CHIP 47.0NF C162,C163,C169-C171, 140 10.00% 16.0V X7R 0603 C174-C176,C244,C245, NICKEL C256-C259,C266,C269,C320, C321,C325-C328,C333,C335 187.00 EA A0618849 CHC0603X7R104K4B NPS00009-1 CAP CER CHIP 100.0NF C13,C21,C22,C73,C75-C77, 150 10.00% 16.0V X7R 0603 C96,C105,C138,C155,C165, NICKEL C178-C180,C183,C190,C193, C197-C199,C222,C227,C232, C234-C236,C238,C255,C260, C273,C284,C287,C288,C296, C297,C300,C301,C310,C313, C314,C316,C323,C336,C337, C343,C344,C348-C352,C363, C366,C367,C369,C372,C373, C378,C379,C383-C385, C388-C390,C400-C403, C407-C412,C414,C415,C419, C421,C425,C429,C430,C432, C435,C436,C492,C493, C548-C551,C555,C558-C562, C565,C575,C577,C578, C581-C584,C586,C588, C590-C592,C595,C602,C606, C607,C610,C613-C616,C619, C622,C623,C636,C638,C641, C643-C648,C650,C653, C655-C662,C664,C665,C668, C670,C671,C674-C682, C686-C689,C692,C695,C696, C698,C700,C702-C710, C712-C717,C719,C721-C725, STOCKLIST REPORT CONFIDENTIAL – NOT FOR PUBLIC INSPECTION SYSTEM : MCBTS FRM PRODUCT : NTGS81AC - 800MHZ MCBTS TX /RX ASSY CR PCP ====== == ======== ========================== ==== =============== ========================== ========================== ==== QTY. UN CPC-CODE ENGINEERING CODE REL SPEC. DESCRIPTION/ COMPONENT ITEM IT PAS PRODUCT NAME DESIGNATION NO ====== == ======== ========================== ==== =============== ========================== ========================== ==== C956 2.00 EA A0618217 CHC1812X7R474K1B NPS00009-1 CAP CER CHIP 470.0NF C489,C496 160 10.00% 100.0V X7R 1812 NICKEL 4.00 EA A0380707 CHR11E0000 NPS25161-11 ZERO OHM JUMPER, L68,L69,L100,L102 200 50MILLIOHM MAXIMUM. CURRENT 1A MA 58.00 EA A0600431 CHR11F0000 NPS25161-11 RES FILM SMT 0.05 OHM C125,R43,R47,R48,R53,R55, 210 MAXIMUM 1A MAXIMUM R103,R104,R110,R138,R149, R155,R158,R165,R169,R184, R199,R206,R221,R224,R225, R236,R239,R240,R242,R244, R257,R261,R262,R267,R275, R276,R287,R290-R293,R345, R359,R392-R395,R421,R424, R425,R445,R460,R463,R476, R501,R513,R517,R519,R719, R720,R731,R734 2.00 EA A0609413 CHR01F1101 NPS25161-20 RES FILM SMT 1.10 KOHM R122,R127 220 0.062W 1.00% 100 PPM/C 3.00 EA A0609409 CHR01F1211X NPS25161-20 RES FILM SMT 1.21 KOHM R10,R11,R117 230 0.062W 1.00% 250 PPM/C 1.00 EA A0609228 CHR01F1621X NPS25161-20 RES FILM SMT 1.62 KOHM R180 240 0.062W 1.00% 250 PPM/C 1.00 EA A0336709 CHC0805C0G102J5B NPS00009-1 CAP CER CHIP 1.0NF 5.00% C957 250 50.0V C0G 0805 20.00 EA A0353259 CHC0603X7R102K5B NPS00009-1 CAP CER CHIP 1.0NF 10.00% C40,C146,C147,C151,C152, 260 50.0V X7R 0603 NICKEL C210,C212,C214,C229,C233, C241,C253,C264,C280,C306, C341,C342,C380,C387,L105 2.00 EA A0377577 CHR15A1003 NPS25161-21 RES FILM SMT 100.00 KOHM R2,R8 270 0.125W 0.10% 25 PPM/C 7.00 EA A0382477 CHR01F1003X NPS25161-20 RES FILM SMT 100.00 KOHM R136,R146,R193,R194,R278, 280 0.062W 1.00% 100 PPM/C R284,R512 1.00 EA A0684187 QM-MC100LVELT22H5 NPS00018-1183.A MICROCIRCUIT, DUAL U45 290 0684187 LVTTL/LVCMOS TO DIFFERENTIAL LV 4.00 EA A0382441 CHC0603C0G101F5B NPS00009-1 CAP CER CHIP 100PF 50V 1% C230,C231,C308,C309 300 STOCKLIST REPORT CONFIDENTIAL – NOT FOR PUBLIC INSPECTION SYSTEM : MCBTS FRM PRODUCT : NTGS81AC - 800MHZ MCBTS TX /RX ASSY CR PCP ====== == ======== ========================== ==== =============== ========================== ========================== ==== QTY. UN CPC-CODE ENGINEERING CODE REL SPEC. DESCRIPTION/ COMPONENT ITEM IT PAS PRODUCT NAME DESIGNATION NO ====== == ======== ========================== ==== =============== ========================== ========================== ==== 37.00 EA A0385057 CHC0603C0G101J5B NPS00009-1 CAP CER CHIP 100.0PF C112,C120,C122,C261,C365, 310 5.00% 50.0V C0G 0603 C426,C428,C439,C440,C442, NICKEL C596,C600,C601,C605,C663, C666,C667,C672,C684,C685, C690,C691,C693,C694,C697, C701,C729-C735,C737-C740 9.00 EA A0353256 CHC0603C0G101K5B NPS00009-1 CAP CER CHIP 100PF 50V 10% C223,C225,C274,C298,C304, 320 C354,C370,C381,C589 6.00 EA A0609545 CHR01F1000X NPS25161-20 RES FILM S…

Text truncated - open the document above for the full version.

Exhibit 07 Test Setup Photos