AB6NTE301AAWireless Access Point

Wireless Mesh Network Wireless Access Point 7220 Hardware Installation Guide Product release code Draft 01.00 March 2004 Distribution Number What’s inside... “About this document” “Installing the Wireless AP7220” nnn-nnnn-nnn test Wireless Mesh Network Wireless Access Point 7220 Hardware Installation Guide Document number: nnn-nnnn-nnn Product release: Product release code Document version: Draft 01.00 Date: March 2004 Copyright Country of printing Confidentiality Legal statements Trademarks Copyright2004 Nortel Networks, All Rights Reserved Printed in the United States of America/Canada The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks Inc. The software described in this document is furnished under a license agreement and may be used only in accordance with the terms of that license. The software license agreement is included in this document. Trademarks Nortel Networks, the Nortel Networks logo, the Globemark, Unified Networks, and Contivity are trademarks of Nortel Networks. Huber+Suhner is a trademark of Huber+Suhner Incorporated. Andrew Corporation is a trademark of Andrew Corporation, Inc. Omnimount is a trademark of Omnimount Systems, Inc. Trademarks are acknowledged with an asterisk (*) at their first appearance in the document. Statement of conditions In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. iv Nortel Networks ConfidentialCopyright2004 Nortel Networks nnn-nnnn-nnn Draft 01.00 March 2004 Nortel Networks Inc. software license agreement This Software License Agreement (“License Agreement”) is between you, the end-user (“Customer”) and Nortel Networks Corporation and its subsidiaries and affiliates (“Nortel Networks”). PLEASE READ THE FOLLOWING CAREFULLY. YOU MUST ACCEPT THESE LICENSE TERMS IN ORDER TO DOWNLOAD AND/OR USE THE SOFTWARE. USE OF THE SOFTWARE CONSTITUTES YOUR ACCEPTANCE OF THIS LICENSE AGREEMENT. If you do not accept these terms and conditions, return the Software, unused and in the original shipping container, within 30 days of purchase to obtain a credit for the full purchase price. “Software” is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies. Nortel Networks grants you a license to use the Software only in the country where you acquired the Software. You obtain no rights other than those granted to you under this License Agreement. You are responsible for the selection of the Software and for the installation of, use of, and results obtained from the Software. 1. Licensed Use of Software.Nortel Networks grants Customer a nonexclusive license to use a copy of the Software on only one machine at any one time or to the extent of the activation or authorized usage level, whichever is applicable. To the extent Software is furnished for use with designated hardware or Customer furnished equipment (“CFE”), Customer is granted a nonexclusive license to use Software only on such hardware or CFE, as applicable. Software contains trade secrets and Customer agrees to treat Software as confidential information using the same care and discretion Customer uses with its own similar information that it does not wish to disclose, publish or disseminate. Customer will ensure that anyone who uses the Software does so only in compliance with the terms of this Agreement. Customer shall not a) use, copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engineer or otherwise translate the Software; c) create derivative works or modifications unless expressly authorized; or d) sublicense, rent or lease the Software. Licensors of intellectual property to Nortel Networks are beneficiaries of this provision. Upon termination or breach of the license by Customer or in the event designated hardware or CFE is no longer in use, Customer will promptly return the Software to Nortel Networks or certify its destruction. Nortel Networks may audit by remote polling or other reasonable means to determine Customer’s Software activation or usage levels. If suppliers of third party software included in Software require Nortel Networks to include additional or different terms, Customer agrees to abide by such terms provided by Nortel Networks with respect to such third party software. 2. Warranty.Except as may be otherwise expressly agreed to in writing between Nortel Networks and Customer, Software is provided “AS IS” without any warranties (conditions) of any kind. NORTEL NETWORKS DISCLAIMS ALL WARRANTIES (CONDITIONS) FOR THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ANY WARRANTY OF NON INFRINGEMENT. Nortel Networks is not obligated to provide support of any kind for the Software. Some jurisdictions do not allow exclusion of implied warranties, and, in such event, the above exclusions may not apply. 3. Limitation of Remedies.IN NO EVENT SHALL NORTEL NETWORKS OR ITS AGENTS OR SUPPLIERS BE LIABLE FOR ANY OF THE FOLLOWING: a) DAMAGES BASED ON ANY THIRD PARTY CLAIM;…

Text truncated - open the document above for the full version.

Response to TCB Findings 1. The internal pictures need some clarifications to determine which picture belongs to which transmitter. Pictures of each side of the boards are needed (with and without the shield). Please provide additional pictures as appropriate. Additional pictures supplied. 2. Please specify the label material. Clarified on the revised label document.

DRAWNAPPRV’L STREAMISSUE DESIGN AUTHORITY INITIAL APPLICATION TITLE DRAWING NUMBERSCALE SIZESHEET A 1OF NORTEL NETWORKS PROPRIETARY INFORMATION: THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF NORTEL NETWORKS LIMITED, EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY NORTEL NETWORKS LTD. THE HOLDER OF THIS DOCUMENT SHALL (1) KEEP ALL INFORMATION HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES AND (2) USE SAME FOR OPERATING AND MAINTENANCE PURPOSES ONLY. (CorelDRAW9 00/01/01)PRINTED IN CANADA FULL ECD: 102-XXXXX DATE: MARCH 29, 2004 01 DDDB 01 P0608468 2 NTE301AA LABEL, FCC ID NOTES: 1. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE EXPRESSED IN MILLIMETERS. TOLERANCE SSHA LLBE; ONEDECIMA LPLACE S =+ /-.1 TWO DECIMA LPLACE S =+ /-.05 A LLLABE LCORNER SSHA LLHAV E A .8RADIUS. 2. THIS DESIGN FILE WAS CREATED IN ACCORDANCE WITH STD. 1517.20. TH ELABEL S/ARTWOR KSHA LLMEE TA LLTH EREQUIREMENT SO FNPS-90942. 3. THE ARTWORK (SEE SHEET 2) SHALL BE PLOTTED AT A MINIMUM OF 1200 DPI. TH EFONT( S)SHA LLB E:C BUNIVERS 6 7 CONDENSED BOLD 4. MATERIAL: R0117261 (3M SCOTCHCAL 3690E BRIGHT WHITE CAST FILM) FINIS H : R0118329 (3M SCOTCHCAP 7735FL ) 5. NORTEL NETWORKS OBSERVATIONAL STANDARDS FOR COLORING (CORP. STD. 2701.01); TEXT: BLACK PER STANDARD S-30154 OVERLAMINATE FILM * This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Model: NTE301AA FCC ID: AB6NTE301AA NORTEL NETWORKS IC: 332H-NTE301AA 10 70 P0608468-M1 STREAM / ISSUE: 01/01 SCALE= 1/1 SHEET 2 OF 2 * This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Model: NTE301AA FCC ID: AB6NTE301AA NORTEL NETWORKS IC: 332H-NTE301AA

Switch Matrix #10

Prediction of MPE limit at a given distance 10dBi Integral Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 20.00 (dBm) Maximum peak output power at antenna input terminal: 100 (mW) Antenna gain(typical): 10 (dBi) Maximum antenna gain: 10 (numeric) Prediction distance: 20 (cm) Prediction frequency: 5800 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.198944 (mW/cm^2) Maximum allowable antenna gain: 17.01269855 (dBi) Margin of Compliance: 7.012698554 2 4 R PG S π =

Prediction of MPE limit at a given distance 13dBi Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 16.00 (dBm) Maximum peak output power at antenna input terminal: 39.81071706 (mW) Antenna gain(typical): 13 (dBi) Maximum antenna gain: 19.95262315 (numeric) Prediction distance: 20 (cm) Prediction frequency: 5700 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.158027 (mW/cm^2) Maximum allowable antenna gain: 21.01269855 (dBi) Margin of Compliance: 8.012698554 2 4 R PG S π =

Prediction of MPE limit at a given distance 18dBi Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 16.00 (dBm) Maximum peak output power at antenna input terminal: 39.81071706 (mW) Antenna gain(typical): 18 (dBi) Maximum antenna gain: 63.09573445 (numeric) Prediction distance: 20 (cm) Prediction frequency: 5700 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.499724 (mW/cm^2) Maximum allowable antenna gain: 21.01269855 (dBi) Margin of Compliance: 3.012698554 2 4 R PG S π =

Prediction of MPE limit at a given distance 23.6dBi Antenna - Outdoor Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 16.00 (dBm) Maximum peak output power at antenna input terminal: 39.81071706 (mW) Antenna gain(typical): 23.6 (dBi) Maximum antenna gain: 229.0867653 (numeric) Prediction distance: 30 (cm) Prediction frequency: 5700 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.806395 (mW/cm^2) Maximum allowable antenna gain: 24.53452373 (dBi) Margin of Compliance: 0.934523735 2 4 R PG S π =

Prediction of MPE limit at a given distance 0dBi PIFA Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 20.80 (dBm) Maximum peak output power at antenna input terminal: 120.2264435 (mW) Antenna gain(typical): 0 (dBi) Maximum antenna gain: 1 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2400 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.023918 (mW/cm^2) Maximum allowable antenna gain: 16.21269855 (dBi) Margin of Compliance: 16.21269855 2 4 R PG S π =

Prediction of MPE limit at a given distance 5dBi Whip Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 20.80 (dBm) Maximum peak output power at antenna input terminal: 120.2264435 (mW) Antenna gain(typical): 5 (dBi) Maximum antenna gain: 3.16227766 (numeric) Prediction distance: 20 (cm) Prediction frequency: 2400 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.075636 (mW/cm^2) Maximum allowable antenna gain: 16.21269855 (dBi) Margin of Compliance: 11.21269855 2 4 R PG S π =

Master: PT15C-FHT Date: February 7, 2002 Test Report: 4W07871 Applicant: Nortel Networks 3500 Carling Ave. Nepean, Ontario K2H 8E9 Equipment Under Test: NTE301AA (EUT) Wireless Network Router FCC ID: AB6NTE301AA In Accordance With: FCC Part 15.247, Subpart C Tested By: Nemko Canada Inc. 303 River Road, R.R. 5 Ottawa, Ontario K1V 1H2 Authorized By: Kevin Carr, EMC/EMI/Wireless Specialist Date: 5 March 2004 Total Number of Pages: 50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.4W07871 EQUIPMENT: NTE301AA Page 2 of 50 Table of Contents Section 1. Summary of Test Results ...................................................................................3 Section 2. General Equipment Specification......................................................................5 Section 3. Powerline Conducted Emissions........................................................................6 Section 4. 6dB Bandwidth..................................................................................................12 Section 5. Peak Output Power...........................................................................................19 Section 6. Spurious Emissions ...........................................................................................22 Section 7. Peak Power Spectral Density ...........................................................................41 Section 8. RF Exposure Evaluation ..................................................................................46 Section 9. Block Diagrams ..................................................................................................48 Section 10. Test Equipment List ..........................................................................................50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.4W07871 EQUIPMENT: NTE301AA Page 3 of 50 Section 1. Summary of Test Results General All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C. Radiated tests were conducted is accordance with ANSI C63.4-1992. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. TESTED BY: _______________________________ DATE: 5 March 2004 Glen Westwell, Wireless Technologist Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The results apply only to the samples tested. Nemko Canada Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 4 of 50 Summary Of Test Data Name Of Test Para. No. Result Powerline Conducted Emissions 15.207(a) Complies 6dB Bandwidth 15.247(a)(2) Complies Peak Output Power 15.247(b)(3) Complies Spurious Emissions (Antenna Conducted) 15.247(c) Complies Spurious Emissions (Radiated) 15.247(c) Complies Peak Power Spectral Density 15.247(d) Complies Test Conditions: Indoor Temperature: 22°C Humidity: 31% Outdoor Temperature: 10°C Humidity: 50% Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 5 of 50 Section 2. General Equipment Specification Manufacturer: Nortel Networks Model No.: NTE301AA Serial No.: NNTM536G0VD2 Date Received In Laboratory: 12 Feb. 2004 Nemko Identification No.: #2 Operating Frequency(s): 2412-2462MHz 5740-5840MHz Rated Power (maximum): 2.4GHz Band = 20dBm 5GHz Band = 20dBm Modulation/Access Method: 802.11b/g & 802.11a Antenna Data: 2.4GHz, 802.11b/g (1) Nearson Whip, Model 151 = 5dBi (2) PIFA Integral = 0dBi 5GHz, 802.11a (1) Integral = 10dBi (2) H&S SPA 5600140/14/0/V = 13dBi (3) Andrews #FPA5250D06-N = 18dBi (4) Andrews #FPA5250D12-N = 23.6dBi Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 6 of 50 Section 3. Powerline Conducted Emissions Para. No.: 15.207 (a) Test Performed By: Glen Westwell Date of Test: 16 Feb. 2004 Test Results: Complies. Measurement Data: See attached graph(s). Limits For Conducted Disturbance At The Mains Ports Of Class B Limits dB(μV) Frequency Range MHz Quasi-Peak Average Result 0.15 to 0.50 66 to 56 56 to 46 0.5 to 5 56 46 5 to 30 60 50 Complies. Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50MHz. Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 7 of 50 Conducted Disturbance at Mains Detailed Setup Photos: Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 8 of 50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 9 of 50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 10 of 50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 11 of 50 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 12 of 50 Section 4. 6dB Bandwidth Para. No.: 15.247 (a)(2) Test Performed By: Glen Westwell Date of Test: 18 Feb. 2004 Limit: ≥ 500kHz Test Results: Complies Measurement Data: See attached Plots 6dB Occupied Bandwidth 2412MHz 2432MHz 2462MHz 802.11b 11.7MHz 11.6MHz 11.8MHz 2412MHz 2432MHz 2462MHz …

Text truncated - open the document above for the full version.

Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 7 of 50 Conducted Disturbance at Mains Detailed Setup Photos: Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 38 of 50 Radiated Emissions 5GHz Large External Antenna, 23.6dBi Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 39 of 50 5GHz Mid Size External Antenna, 18dBi 5GHz Small External Antenna, 13dBi Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:4W07871 EQUIPMENT:NTE301AA Page 40 of 50 5GHz Integral Antenna & 2.4GHz 5dBi Whip Antenna. 0dBi PIFA