AB6NTE301BAWireless Access Point

FINAL April 8th-2005 Part No. 318527-A Rev 01 March 2005 Installing the Nortel Wireless Access Point 7220 2 318527-A Rev 01 FINAL April 8th-2005 Copyright © 2005 Nortel Networks All rights reserved. March 2005 The information in this document is subject to change without notice. The statements, configurations, technical data, and recommendations in this document are believed to be accurate and reliable, but are presented without express or implied warranty. Users must take full responsibility for their applications of any products specified in this document. The information in this document is proprietary to Nortel Networks Inc. The software described in this document is furnished under a license agreement and may be used only in accordance with the terms of that license. The software license agreement is included in this document. Trademarks Nortel Networks, the Nortel Networks logo, the Globemark, Unified Networks, and [other Nortel trademarked product names] are trademarks of Nortel Networks. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation. Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated. Huber+Suhner is a trademark of Huber+Suhner Incorporated. Andrew Corporation is a trademark of Andrew Corporation, Inc. Dow Corning is a trademark of Dow Corning Incorporated. Ethernet is a trademark of Xerox Corporation. The asterisk after a name denotes a trademarked item. Statement of conditions In the interest of improving internal design, operational function, and/or reliability, Nortel Networks Inc. reserves the right to make changes to the products described in this document without notice. Nortel Networks Inc. does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Portions of the code in this software product may be Copyright © 1988, Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms of such portions are permitted, provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that such portions of the software were developed by the University of California, Berkeley. The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission. SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third parties). 3 Installing the Nortel Wireless Access Point 7220 FINAL April 8th-2005 Regulatory Statements This device is designed for installation and use in the USA, Canada, China and Taiwan regulatory rules. For operation in other countries, please consult Nortel Networks. This device contains one radio operating in the 2.4 GHz band and one radio operating in the 5 GHz bands in point-to-point fashion. Regulatory statements pursuant to CFR 47 Part 15 for the United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Re-orient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The installation and operation of this device shall be in strict compliance with the manufacturer's instructions for its installation and use. Any changes in the installation, or modification of the device or of its optional accessories that are not expressly approved by the manufacturer and the party responsible for compliance could void the user's authority to operate the device. Only those optional accessories listed in the operating manual shall be used with this device. The use of any other accessories (including antennas) will void the warranty and the user's authority to operate the device. The manufacturer is not responsible for interference to other radio systems caused by the use of this device or by any unauthorized modification to the device or its associated antennas. The manufacturer assumes no liability for any damage or violation of regulations arising from the use of the device. This device is designed to be installed by professionals trained in its installation and who are responsible for compliance with the relevant regulations. This device is designed for installation in fixed locations only. This device …

Text truncated - open the document above for the full version.

#1 – Front/top external view

#2 – Bottom external view

Nortel Networks FCC / IC Label AP 7220 NTE301BA LABEL REQUIREMENTS RF IC & FCC NortelModel: NTE301BA IC: 332H-NTE301BAFCC ID: AB6NTE301BA * This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NortelModel: NTE301BA IC: 332H-NTE301BAFCC ID: AB6NTE301BA * This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 70mm 10mm Nortel Networks AP7220 Model NTE301BA FCC / IC Label Location NortelModel: NTE301BA IC: 332H-NTE301BAFCC ID: AB6NTE301BA * This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 70mm 10mm Nortel Networks AP7220 Model NTE301BA FCC / IC Label Location NortelModel: NTE301BA IC: 332H-NTE301BAFCC ID: AB6NTE301BA * This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NortelModel: NTE301BA IC: 332H-NTE301BAFCC ID: AB6NTE301BA * This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Nortel Networks FCC / IC Label AP 7220 NTE301BA FCC/IC Regulatory Label Location

#3 – Overall internal view

Prediction of MPE limit at a given distance 10.7dBi Integral Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 21.00 (dBm) Maximum peak output power at antenna input terminal: 125.8925412 (mW) Antenna gain(typical): 10.7 (dBi) Maximum antenna gain: 11.74897555 (numeric) Prediction distance: 50 (cm) Prediction frequency: 5725 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.047081 (mW/cm^2) Maximum allowable antenna gain: 23.97149873 (dBi) Margin of Compliance: 13.27149873 2 4 R PG S π =

Prediction of MPE limit at a given distance 13dBi Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 21.00 (dBm) Maximum peak output power at antenna input terminal: 125.8925412 (mW) Antenna gain(typical): 13 (dBi) Maximum antenna gain: 19.95262315 (numeric) Prediction distance: 50 (cm) Prediction frequency: 5725 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.079956 (mW/cm^2) Maximum allowable antenna gain: 23.97149873 (dBi) Margin of Compliance: 10.97149873 2 4 R PG S π =

Prediction of MPE limit at a given distance 18dBi Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 21.00 (dBm) Maximum peak output power at antenna input terminal: 125.8925412 (mW) Antenna gain(typical): 18 (dBi) Maximum antenna gain: 63.09573445 (numeric) Prediction distance: 50 (cm) Prediction frequency: 5725 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.252843 (mW/cm^2) Maximum allowable antenna gain: 23.97149873 (dBi) Margin of Compliance: 5.971498727 2 4 R PG S π =

Prediction of MPE limit at a given distance 23dBi Antenna - Outdoor Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 21.00 (dBm) Maximum peak output power at antenna input terminal: 125.8925412 (mW) Antenna gain(typical): 23 (dBi) Maximum antenna gain: 199.5262315 (numeric) Prediction distance: 100 (cm) Prediction frequency: 5725 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.199890 (mW/cm^2) Maximum allowable antenna gain: 29.99209864 (dBi) Margin of Compliance: 6.99209864 2 4 R PG S π =

Prediction of MPE limit at a given distance 0dBi PIFA Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 22.00 (dBm) Maximum peak output power at antenna input terminal: 158.4893192 (mW) Antenna gain(typical): 0 (dBi) Maximum antenna gain: 1 (numeric) Prediction distance: 50 (cm) Prediction frequency: 2412 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.005045 (mW/cm^2) Maximum allowable antenna gain: 22.97149873 (dBi) Margin of Compliance: 22.97149873 2 4 R PG S π =

Prediction of MPE limit at a given distance 4dBi Whip Antenna Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 22.00 (dBm) Maximum peak output power at antenna input terminal: 158.4893192 (mW) Antenna gain(typical): 4 (dBi) Maximum antenna gain: 2.511886432 (numeric) Prediction distance: 50 (cm) Prediction frequency: 2412 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.012672 (mW/cm^2) Maximum allowable antenna gain: 22.97149873 (dBi) Margin of Compliance: 18.97149873 2 4 R PG S π =

Master: PT15C-FHT Date: February 7, 2002 Test Report: 5W39796, Issue 2 Applicant: Nortel Networks 3500 Carling Ave. Nepean, Ontario K2H 8E9 Equipment Under Test: Wireless AP7220 (EUT) FCC ID: AB6NTE301BA In Accordance With: FCC Part 15.247, Subpart C Tested By: Nemko Canada Inc. 303 River Road, R.R. 5 Ottawa, Ontario K1V 1H2 Authorized By: Sim Jagpal, General Manager Date: 12 April 2005 Total Number of Pages: 68 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 2 of 68 Table of Contents Section 1. Summary of Test Results 3 Section 2. General Equipment Specification 5 Section 3. Powerline Conducted Emissions 6 Section 4. 6dB Bandwidth 10 Section 5. Peak Output Power 17 Section 6. Spurious Emissions 38 Section 7. Peak Power Spectral Density 57 Section 8. RF Exposure Evaluation 64 Section 9. Block Diagram 66 Section 10. Test Equipment List 68 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 3 of 68 Section 1. Summary of Test Results General All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 15, Subpart C. Radiated tests were conducted is accordance with ANSI C63.4-1992. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. TESTED BY: _______________________________ DATE: 12 April 2005 Xu Jin, Wireless Specialist Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation. The results apply only to the samples tested. Nemko Canada Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.: 5W39796, Issue 2 EQUIPMENT:NTE301AA Page 4 of 68 Summary Of Test Data Name Of Test Para. No. Result Powerline Conducted Emissions 15.207(a) Complies 6dB Bandwidth 15.247(a)(2) Complies Peak Output Power 15.247(b)(3) Complies Spurious Emissions (Antenna Conducted) 15.247(c) Complies Spurious Emissions (Radiated) 15.247(c) Complies Peak Power Spectral Density 15.247(d) Complies Test Conditions: Indoor Temperature: 23°C Humidity: 24% Outdoor Temperature: 7°C Humidity: 23% Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 5 of 68 Section 2. General Equipment Specification Manufacturer: Nortel Networks Model No.: NTE301BA Serial No.: NNTMENC5T1TB Date Received In Laboratory: 28 Feb. 2005 Nemko Identification No.: #6 Operating Frequency(s): 2412-2462MHz 5740-5840MHz Rated Power (maximum): 2.4GHz Band = 22dBm* 5GHz Band = 21dBm* Modulation/Access Method: 802.11b/g & 802.11a Antenna Data: 2.4GHz, 802.11b/g (1) Nearson Whip, S151AM-2450 151 = 4dBi (2) PIFA Integral, NTE30211 = 0dBi 5GHz, 802.11a (1) Integral antenna = 10.7dBi (2) H&S 5600/40/14/0/V = 13dBi (3) Andrews #FPA5150-18-1 = 18dBi (4) Andrews #FPA5150-23PM-1 = 23dBi * Manufacture’s rated power is average power measured using a wide band power meter with a thermocouple detector. Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 6 of 68 Section 3. Powerline Conducted Emissions Para. No.: 15.207 (a) Test Performed By: Xu Jin Date of Test: Mar. 1, 2005 Test Results: Complies. Measurement Data: See attached graph(s). Limits For Conducted Disturbance At The Mains Ports Of Class B Limits dB(μV) Frequency Range MHz Quasi-Peak Average Result 0.15 to 0.50 66 to 56 56 to 46 0.5 to 5 56 46 5 to 30 60 50 Complies. Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50MHz. 3. The test was performed using a peak detector. Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 7 of 68 Conducted Disturbance at Mains Detailed Setup Photos: Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 8 of 68 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 9 of 68 Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 10 of 68 Section 4. 6dB Bandwidth Para. No.: 15.247 (a)(2) Test Performed By: Xu Jin Date of Test: 28 Feb. 2005 Limit: ≥ 500kHz Test Results: Complies Measurement Data: See attached Plots 6dB Occupied Bandwidth 2412MHz 2432MHz 2462MHz 802.11b 10.98MHz 10.9MHz 10.58MHz 2412MHz 2432MHz 2462MHz 802.11g 16.59MHz 16.59MHz 16.67MHz 5740MHz 5800MHz 5840MHz 802.11a 16.75MHz 16.75MHz 16.75MHz Nemko Canada Inc. FCC PART 15, SUBPART C PROJECT NO.:5W39796, Issue 2 EQUIPMENT: Wireless AP7220 Page 11 of 68 802.11b_Ch1, 2412MHz A Offset 12 dB LVL Ref 30 dBmAtt 45 dB Center 2.412 GHzSpan 50 MHz5 MHz/ * * RBW 300 kHz VBW 300 kHz SWT 2.5 ms *1 AV VIEW -70 -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -0.37 dBm 2.406391026 GHz 2 Delta 2 [T1 ] -0.29 dB 10.977564103 MHz 802.11b_1 Date: 28.FEB.2005 12:50:21 802.11b_Ch5, 2432MHz A Offset 12 dB LVL Ref 30 dBmAtt 45 dB Center 2.432 GHzSpan 50 MHz5 MHz/ * * RBW 300 kHz VBW 300 kHz SWT 2.5 ms VIEW *1 AV -70 -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 1.56 dBm 2.426471154 GHz 2 Delta 2…

Text truncated - open the document above for the full version.

Conducted Disturbance at Mains Detailed Setup Photos:

5GHz Andrews Antenna, 23dBi 5GHz Andrews Antenna 18dBi 5GHz H&S SPA Antenna, 13dBi 5G Integral Antenna, 10.7dBi 2.4GHz Nearson Whip Antenna, 4dBi 2.4GHz PIFA Antenna (integral), 0dBi