Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 2 | 24E | 1.93 GHz - 1.99 GHz | 45.71 W | 300KGXW | 90
Hz |
Grant NotesPower output listed is Conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. The equipment can be configured with these power amplifiers HePA Hardware Code: NTQA50RA), PA (Hardware Code: NTQA50DB, NTQA50GA), PA (Hardware code: NTQA37AA) and coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22
Subpart H: For Diplexer configurations using both GMSK and 8PSK modulations, 2 dB power reduction is required for edge channels ARFCN 128, 131, 133, 181, 183, 231, 233, 251. FCC Rule Part 24 Subpart E: The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are listed below. Configurations in GMSK Modulation: HePA module (Hardware Code: NTQA50RA): 6dB power reduction[Diplexer configuration]: 2dB [Hybrid H2D diplexer configuration] PA module
(Hardware Code: NTQA50DB,NTQA50GA): 4dB power reduction [Diplexer onfiguration] configurations in 8PSK Modulation HePA module(Hardware Code: NTQA50RA): 2 dB power reduction [Diplexer configuration, RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3).