ABZ89FC3799Non Broadcast Transmitter

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D User / Operational Manual Operational or User’s Manual The manual should include instruction, installation, operator, or technical manuals with required ‘information to the users’. This manual should include a statement that cautions the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The manual shall include RF Hazard warning statements, if applicable. Draft copy of some of the manual information has been assembled and has been included as part of this filing package. Upon request, published and/or printed manuals will be sent to the commission and/or telecommunication certification body (TCB). All of the descriptions, block diagrams, and schematics that are included in this filing package are current as of the package submittal date. EXHIBIT DESCRIPTION D1-1 Manual Front Matter (Draft) D1-2 Specifications (Draft) D1-3 Field Replaceable Units and Orderable Parts (Draft) D1-4 Tune-Up Procedure D1-5 Racking Configurations D1-6 Functional Description / Operation of Modules (Draft) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-1 User / Operational Manual Manual Front Matter (Draft) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-1 User / Operational Manual Manual Front Matter (Draft, Continued) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-1 User / Operational Manual Manual Front Matter (Draft, Continued) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-1 User / Operational Manual Manual Front Matter (Draft, Continued) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-2 User / Operational Manual Specifications (Draft) General Performance ModelT7039 H x W x D5.25" x 19" x 18" (133x483x457mm) Weight46 lbs (21 kg) Power Requirements AC: 90-264 VAC, 47-63 Hz DC: 43.2-60 VDC Temperature Range-30 to 60C (-22 to 140F) Input / Output Impedance50 ohms Antenna Connectors Transmit: N female Receive: N female Modulation IV&D Transmit / Receive: C4FM, LSM, H-DQPSK, TDMA Analog: Frequency Modulation Frequency StabilityExternal Reference Channel Spacing Digital - C4FM, Linear Modulations: 12.5 kHz Analog Frequency Modulation: 12.5 kHz, 25 kHz Transmitter Frequency Range136-174 MHz Power output C4FM Digital and Analog: 2-100 Watts Linear Digital Modulations: 2-100 Watts (Average) Electronic BandwidthFull Bandwidth Intermodulation Attenuation55 dB Spurious and Harmonic Emissions Attenuation 90 dB FCC Type Acceptance FCC Designation:Frequency RangeTypePower Output ABZ89FC3799136-174 MHzTransmitter (FM)Variable 2-100 W Transmitter (Linear)Variable 2-100 W (Avg) ABZ89FR3791136-174 MHzReceiverN/A APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-3 User / Operational Manual Field Replaceable Units and Orderable Parts (Draft) Field replaceable units, or FRUs, include special packaging to allow shipment to customers. Parts and FRUs available for customer order are listed in this section. All parts and FRUs are sourced through the Radio Products and Service Division (RPSD). VHF Product OfferingP/NVHF PA – Power Amplifier CLD1315A Output Board / Low Pass Filter CLD6131A LDM – Linear driver module CLD6107B Distribution CLD6128B LFM – Final Module CLD6130A VHF XCVR –Transceiver PCUD1000B, PCUD2000B XCVR VHF RF kit CUD6000B RMC Pass Through Module MCLD6106A RMC Pass Through Module MCLD1309A VHF BR – Base Radio T7039A VHF – 6 pack includes expansion rack T7054A PMU – Power Monitoring Unit 0171259H01 Model/Option Description FRU Description CA00290AC INC: VHF 150-174 TRANSCEIVER DLN6568A FRU: AC / 48V DC Power Supply CA00292AC INC: VHF 136-174 PA 5985167Y02 FRU: Power Supply Fan Module CA00292AE INC: VHF 100W LINEAR 136-174 PA DLN6569A FRU: Site Controller X530BG ADD: VHF LINEAR PA (136-174 MHz) DLN6636A FRU: Expansion HUB X531BG ADD: VHF 100W LINEAR PA (136-174 MHz) DLN1380A FRU: Cabinet RMC Pass Through Module TFD6511A INC: PRESELCTOR VHF136-154 MHz DLN1338A FRU: Fan Module TFD6512A INC: PRESELCTOR VHF150-174 MHz DLN1329A FRU: Site Controller Backplane CA01170AA ADD: PMU VHF (136-174 MHz) DLN1330A FRU: Base Radio Backplane CA01164AA CABINET RMC PASS THROUGH MOD DLN1343A FRU: Expandable Site Subsystem Backplane DLN1339A FRU: AC Power Distribution Module X265AN NARROW PRESELECTOR, 136-154 MHz TFD6511A FRU: PRESELECTOR, 136-154 MHz X265AM NARROW PRESELECTOR, 150-174 MHz TFD6512A FRU: PRESELECTOR, 150-174 MHz X182CC DUPLEXER, 136-146 MHz 018541U01 DUPLEXER, 136-146 MHz X182CB DUPLEXER, 144-160 MHz 018541U02 DUPLEXER, 144-160 MHz X182CA DUPLEXER, 158-174 MHz 018541U03 DUPLEXER, 158-174 MHz CA01182AA VHF DUPLEXER HARDWARE KIT DLN1380A FRU: CABINET RMC PASS THROUGH MOD X676BJ EXT DUAL CIRCULATOR, 136-146 MHz 0185416U01 EXT DUAL CIRCULATOR, 136-146 MHz X676BI EXT DUAL CIRCULATOR, 144-160 MHz 0185416U02 EXT DUAL CIRCULATOR, 144-160 MHz X676BH EXT DUAL CIRCULATOR, 158-174 MHz 0185416U03 EXT DUAL CIRCULATOR, 158-174 MHz 9185856Y03 LOW PASS / HARMONIC FILTER VHF DLN1376A FRU: TRANSCEIVER VHF 136-174 T7321A GCM 8000 COMPARATOR DLN1431A FRU: TRANSCEIVER VHF 136-174 w/ SAC CA01183AA GCM 8000 COMPARATOR DLN1377A FRU: VHF 136-174 PA X153AW Rack Mount Hardware DLN6725A FRU: VHF 100W LINEAR 136-174 PA Customer Replaceable Power Cables for Standalone Base Radio Other Customer Replaceable Parts Part Number Description Part Number Description TRN7663A Power Cable, North America 3084827Y01 Battery Temperature Sensor Extension Cable TRN7755A Power Cable, Continental Europe 6484850Y01 Junction Panel (Cabinet Mounting) TTN5049A Power Cable, UK / Ireland 6485367Y01 Junction Panel (Rack Mounting) TTN5103A Power Cable, Australia APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-3 User / Operational Manual Field Replaceable Units and Orderable Parts (Draft) (Continued) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-4 User / Operational Manual Tune-Up Procedure There is no field tune-up procedure. All …

Text truncated - open the document above for the full version.

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C1-1 Photographs of the Device External Front View of Base Radio APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C1-2 Photographs of the Device External Front View of Base Radio, Front Panel Removed APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C1-3 Photographs of the Device External Front View of Base Radio, Alternate Racking of Base Radio in ‘GTR 8000 Expandable Site Sub-system’ Configuration APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C2-1 Photographs of the Device External Back View of Base Radio APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C2-2 Photographs of the Device FCC Identification Label Serial No: F.O . Page No: Item No: Model No. T7039A TX FCC ID: ABZ89FC3799 RX FCC ID: ABZ 89F R3791 IC: 109AB-T 7039 IC Model No: T7039-VH F100 This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that t his device does not cause harmful interference. 90-230V 10A Max. 50/60 Hz 48V 18A I.T.E. 31 NH

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT A1 Equipment Label FCC Identification Number The FCC Identifier (FCC ID) is made up of the Grantee Code, supplied by the FCC, and an Equipment Product Code. This equipment product code may be to 14 characters in length, and is assigned by the grantee (applicant). The Grantee Code for this product is ABZ The Equipment Product Code for this product is 89FC3799 The entire FCC ID number is ABZ89FC3799 APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT A2-1 Equipment Label FCC ID Label A representative image of the FCC Identification label is shown below. This label is generated as part of the standard manufacturing process and is printed in the factory. Much of the information that is on the label, such as serial number, model number, etc. is driven by the ordering process and is unique per customer order. Serial No: F.O . Page No: Item No: Model No. T7039A TX FCC ID: ABZ89FC3799 RX FCC ID: ABZ 89F R3791 IC: 109AB-T 7039 IC Model No: T7039-VH F100 This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that t his device does not cause harmful interference. 90-230V 10A Max. 50/60 Hz 48V 18A I.T.E. 31 NH FCC Identification Label APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT A2-2 Equipment Label FCC ID Label The location of the FCC ID label is on the back of the radio, as shown in the photograph below. Location of FCC ID Label

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-1.1 Photographs of the Device Internal Front View – Transceiver Module Transceiver Module without the Supplementary Audio Card (SAC) Transceiver Module with the Supplementary Audio Card (SAC) Installed Front View of Base Radio Showing Transceiver Module with SAC Installed and Identifying Connections APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-1.2 Photographs of the Device Internal Front View – Transceiver Module Circuit Board Top View APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-1.3 Photographs of the Device Internal Front View – Transceiver Module, Control Section APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-1.4 Photographs of the Device Internal Front View – Transceiver Module, Exciter Section APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-1.5 Photographs of the Device Internal Front View – Transceiver Module, Receiver Section APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-2 Photographs of the Device Internal Front View – Power Amplifier Module, Cover Removed APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-3.1 Photographs of the Device Internal Front View – Power Supply Module APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-3.2 Photographs of the Device Internal Front View – Power Supply Module, Circuit Boards, Top View APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-4 Photographs of the Device Internal Front View – Backplane APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C3-5 Photographs of the Device Internal Front View – Supplementary Audio Card (SAC) APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C4-1 Photographs of the Device Internal Back View – Transceiver Module APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C4-2 Photographs of the Device Internal Back View – Power Amplifier Module APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C4-3 Photographs of the Device Internal Back View – Power Supply Module, Circuit Boards, Back View APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C4-4 Photographs of the Device Internal Back View – Backplane APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT C4-5 Photographs of the Device Internal Back View – Supplementary Audio Card (SAC)

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT D1-4 User / Operational Manual Tune-Up Procedure There is no field tune-up procedure. All adjustments are software controlled and are pre-set at the factory. Certain station operating parameters can be changed via man-machine interface (MMI) commands, within predetermined limits. Examples include transmit / receiver operating frequencies and transmitter power level.

APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT E Report on Test Measurements Measurements Report The measurement report shows compliance information against the pertinent technical standards. Each section of the report contains either verbiage or graphs which show compliance to applicable standards as required. Each section also explains testing method and indicates what the applicable specification is. A list of test equipment for all sections, and certification signoff page are included at the end of the measurement report. SUBMITTED MEASURED DATA -- INDEX EXHIBIT DESCRIPTION E1-1 RF Output-Data E1-2 Occupied Bandwidth: Setup, Specifications, and Index E1-2.1 Linear Simulcast Modulation (LSM) E1-2.2 Compatible 4-Level Frequency Modulation (C4FM) E1-2.3 TDMA Linear Simulcast Modulation (LSM) E1-2.4 TDMA Compatible 4-Level Frequency Modulation (C4FM) E1-2.5 H-DQPSK, P25 Two Slot TDMA Digital Modulation E1-3 Conducted Spurious Emissions: Setup, Specifications, and Index E1-3.1 LSM Conducted Spurious Emissions, Harmonics, Power 100 Watts, Multiple Frequencies E1-3.2 LSM Conducted Spurious Emissions, Harmonics, Power 2 Watts, Multiple Frequencies E1-3.3 C4FM Conducted Spurious Emissions, Harmonics, Power 100 Watts, Multiple Frequencies E1-3.4 C4FM Conducted Spurious Emissions, Harmonics, Power 2 Watts, Multiple Frequencies E1-3.5 Analog Conducted Spurious Emissions, Harmonics, Power 100 Watts, Multiple Frequencies E1-3.6 Analog Conducted Spurious Emissions, Harmonics, Power 2 Watts, Multiple Frequencies E1-3.7 Conducted Spurious Emissions, Close-In, 100 MHz Span, Power Output at 100 Watts, LSM E1-3.8 Conducted Spurious Emissions, Close-In, 100 MHz Span, Power Output at 100 Watts, C4FM E1-3.9 Conducted Spurious Emissions, Close-In, 100 MHz Span, Power Output at 100 Watts, Analog E1-4 Radiated Spurious Emissions: Setup, Specifications, and Index E1-4.1 LSM Radiated Spurious Emissions, Harmonics, Power 100 Watts, Representative Frequency E1-4.2 LSM Radiated Spurious Emissions, Harmonics, Power 2 Watts, Representative Frequency E1-4.3 Analog Radiated Spurious Emissions, Harmonics, Power 100 Watts, Representative Frequency E1-4.4 Analog Radiated Spurious Emissions, Harmonics, Power 2 Watts, Representative Frequency APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT E Report on Test Measurements Measurements Report SUBMITTED MEASURED DATA – INDEX (Continued) EXHIBIT DESCRIPTION E1-5 Frequency Stability: Setup, Specifications, and Index E1-5.1 Frequency Stability Vs Temperature E1-5.2 Frequency Stability Vs Voltage E1-6 Frequency Transient Behavior: Setup, Specifications, Index E1-6.1 Frequency Transient Behavior, 25 kHz Channel Key-Up, Middle of Band E1-6.2 Frequency Transient Behavior, 25 kHz Channel De-Key, Middle of Band E1-6.3 Frequency Transient Behavior, 12.5 kHz Channel Key-Up, Middle of Band E1-6.4 Frequency Transient Behavior, 12.5 kHz Channel De-key, Middle of Band E1-7 Audio Frequency Response – Modulation Characteristics: Setup, Specifications, Index E1-7.1 Audio Frequency Response – Modulation Characteristics, 25 kHz Channels E1-7.2 Audio Frequency Response – Modulation Characteristics, 12.5 kHz Channels E1-8 Audio Modulation Limiting – Modulation Characteristics: Setup, Specifications, Index E1-8.1 Audio Modulation Limiting – Modulation Characteristics, 25 kHz Channels E1-8.2 Audio Modulation Limiting – Modulation Characteristics, 12.5 kHz Channels E1-9 Occupied Bandwidth Description – 25 kHz Analog Modulation E1-9 Occupied Bandwidth Description – 12.5 kHz Analog Modulation E1-9.1 Occupied Bandwidth Plot – Analog, no sub audible signaling, 25 kHz Channels E1-9.2 Occupied Bandwidth Plot – Analog, Private Line signaling, 25 kHz Channels E1-9.3 Occupied Bandwidth Plot – Analog, Digital Private Line signaling, 25 kHz Channels E1-9.4 Occupied Bandwidth Plot – Analog, no sub audible signaling, 12.5 kHz Channels E1-9.5 Occupied Bandwidth Plot – Analog, Private Line signaling, 12.5 kHz Channels E1-9.6 Occupied Bandwidth Plot – Analog, Digital Private Line signaling, 12.5 kHz Channels E1-11 Test Equipment Used E1-12 Statement of Certification APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT E1-1 Report on Test Measurements RF Power Output Data The RF power output was measured with the indicated voltage applied to and current into the final RF amplifying device. The DC current indicated is the total for the final RF amplifier stage, consisting of six parallel power transistors. Linear Modulation Mode: Measured RF output 100 Watts, Average DC Voltage 24.0 Volts DC Current 16.0 Amperes Input power for final RF amplifying device(s) 384 Watts Primary Radio Input Supply Voltage 120 Volts AC Minimum Measured RF output 2 Watts, Average Normal DC Voltage 21.0 Volts Normal DC Current 5.0 Amperes Input power for final RF amplifying device(s) 105 Watts Primary Radio Input Supply Voltage 120 Volts AC Frequency Modulation and Compatible 4-Level Frequency Modulation Mode: Measured RF output 100 Watts DC Voltage 21.0 Volts DC Current 16.0 Amperes Input power for final RF amplifying device(s) 336 Watts Primary Radio Input Supply Voltage 120 Volts AC Minimum Measured RF output 2 Watts Normal DC Voltage 21.0 Volts Normal DC Current 5.0 Amperes Input power for final RF amplifying device(s) 105 Watts Primary Radio Input Supply Voltage 120 Volts AC APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC3799 EXHIBIT E1-2 Report on Test Measurements Occupied Bandwidth – Linear Simulcast Modulation (LSM), 12.5 kHz Channel Spacing There is one exhibit shown for Linear Simulcast Modulation. It can be used in a system configuration based upon channel usage as described in Exhibit B. The occupied bandwidth chart references the following setup and specification requirements. Modulation Type: Linear Simulcast Modulation, LSM Emission Designator: 8K70D1W Channelization: 12.5 kHz Power Setting: 100 Watts, Average Specification Requirement § 90.210(d) Emission Limits: Emission Mask D. For transmitters designed to op…

Text truncated - open the document above for the full version.