ABZ89FC4821CNon-Broadcast Transmitter

GTR 8000 Base Radio ASTRO ® 25 INTEGRATED VOICE AND DATA MN003286A01-E FEBRUARY 2020 © 2020 Motorola Solutions, Inc. All rights reserved Declaration of Conformity Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product: GTR 8000 conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Class A Digital Device This device complies with Part 15 of the FCC. Note: This equipment has been tested and found to comply with the limits for a Class A digital de- vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communi- cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Notice to Users (FCC) This device complies with Part 15 of the FCC rules per the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause unde- sired operation. • Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. MN003286A01-E Declaration of Conformity 2 Copyrights The Motorola Solutions products described in this document may include copyrighted Motorola Solutions computer programs. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Solutions. © 2020 Motorola Solutions, Inc. All Rights Reserved No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Disclaimer Please note that certain features, facilities, and capabilities described in this document may not be applicable to or licensed for use on a particular system, or may be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola Solutions contact for further information. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. MN003286A01-E Copyrights 3 Contact Us The Solutions Support Center (SSC) is the primary contact for technical support included in your organization's service agreement with Motorola Solutions. Service agreement customers should be sure to call the SSC in all situations listed under Customer Responsibilities in their agreement, such as: • Before reloading software • To confirm troubleshooting results and analysis before taking action Your organization received support phone numbers and other contact information appropriate for your geographic region and service agreement. Use that contact information for the most efficient response. However, if needed, you can also find general support contact information on the Motorola Solutions website, by following these steps: 1Enter motorolasolutions.com in your browser. 2Ensure that your organization's country or region is displayed on the page. Clicking or tapping the name of the region provides a way to change it. 3Select "Support" on the motorolasolutions.com page. Comments Send questions and comments regarding user documentation to [email protected]. Provide the following information when reporting a documentation error: • The document title and part number • The page number or title of the section with the error • A description of the error Motorola Solutions offers various courses designed to assist in learning about the system. For information, go to https://learning.motorolasolutions.com to view the current course offerings and technology paths. MN003286A01-E Contact Us 4 Document History VersionDescriptionDate MN003286A01-AOriginal release of the GTR 8000 Base Radio manual November 2016 MN003286A01-BUpdated the following sections: • CSS Initial Device Configuration on page 134 • GTR 8000 Base Radio General Troubleshoot- ing on page 212 November…

Text truncated - open the document above for the full version.

f1' MOTOROLA SOLUTIONS Certification Department Elite Electronic Engineering Inc. 1516 Centre Circle D owners Grove, IL 60515 Date: March 16, 2020 Subject: Application Authorization for FCC and IC Filing To whom it may concern, I hereby authorize Arine Lee to apply, on my behalf, the application for the following FCC and IC filing: FCC ID: ABZ89FC4821C IC ID: 109AB-4821C IC H VIN: T7039-UHFR1C Please contact me if there are any questions or issues. Regards, Robert Sarocka Engineering Manager 847-344-6075 [email protected]

FCC ID: ABZ89FC4821C _______________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13C Date: June 11, 2020 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter with FCC ID: ABZ89FC4821C Dear Sir/Madam: This transmitter is designed to operate in the following frequency ranges: Band/Mode Frequency ranges FCC rule parts UHF 380-435 MHz 90 To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola Solutions is requesting that the FCC lists the above applicable frequencies range under FCC Rule Parts 90 on the FCC Grant. For the FCC’s Rule Parts 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) Part 22 Part 24D Part 74 Part 80 Part 90 Federal Other Regions 380-406.1 X X 406.1-435 X *Canada Please contact me at +604 224 0258 if you required any additional information. Sincerely, Arine Lee FCC/IC Certification Manager E-mail: [email protected]

FCC ID: ABZ89FC4821C ___________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas Penang, Malaysia EXHIBIT 13A Date: June 11, 2020 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communiations Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ89FC4821C Dear Sir/Madam, Motorola Solutions Malaysia Sdn Bhd herein submits application for Certification of the subject transmitter. This transmitter is intended for use at fixed base station sites only with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges: Product Name Model Numbers Frequency Rated Power FCC Rules Part GTR 8000 T7039A 380 - 435 MHz 2 – 100 W; Max=110W 90 We are requesting certification under Part(s) of the Commission’s Rules listed above to allow operation of this equipment. The transmitter is intended for work related occupational use only under Part 90 of the FCC rules. The subject transmitter complies with Section 90.203 in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at +604 224 0258. Sincerely, Arine Lee FCC/IC Certification Manager E-mail: [email protected]

FCC ID: ABZ89FC4821C ___________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13B CONFIDENTIALITY REQUEST June 11, 2020 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communiations Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request of Transmitter with FCC ID: ABZ89FC4821C Dear Sir / Madam, Motorola Solutions Malaysia Sdn Bhd is requesting that Exhibit 4 (Block Diagram), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions consider the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d). 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any information. Sincerely, Arine Lee FCC/IC Certification Manager E-mail: [email protected]

Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 1 OF 5 EXHIBIT 3 EXTERNAL PHOTOGRAPHS (Pursuant to FCC Part 2.1033(b)(7) and 2.1033(c)(12) and RSP 100 Annex C) The following photographs are attached. Exhibit 1. External Front View of Base Radio 3A 2. External Front View of Base Radio, Front Panel Removed 3B 3. External Front View, Alternate Racking of Base Radio on ‘GTR 8000 Expandable Site Sub-system’ 3C 4. Back View of Base Radio (FCC/IC Label Location) 3D 5. Side View of Base Radio (Left) 3E 6. Side View of Base Radio (Right) 3F 7. Top View of Base Radio 3G 8. Bottom View of Base Radio 3H Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 2 OF 5 Exhibit 3A – External Front View of Base Radio Exhibit 3B – External Front View of Base Radio, Front Panel Removed Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 3 OF 5 Exhibit 3C – External Front View, Alternate Racking of Base Radio on ‘GTR 8000 Expandable Site Sub- system’ Exhibit 3D – Back View of Base Radio (FCC/IC Label Location) Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 4 OF 5 Exhibit 3E – Side View of Base Radio (Left) Exhibit 3F – Side View of Base Radio (Right) Exhibit 3G – Top View of Base Radio Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 5 OF 5 Exhibit 3H – Bottom View of Base Radio

Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 1 SHEET 1 OF 2 EXHIBIT 1 IDENTIFICATION LABEL (Pursuant to FCC Part 2.1033(c)(11), 2.1033(b)(7) and RSP 100 Annex C and Sec 3) LOCATION See the Attached Photograph or Sketch Bottom of Radio Top of Radio X Back of Radio Back of Radio under Belt Clip TYPE X The label must be made of tamper-evident material; i.e. the label must tear, distort, or otherwise show evidence of having been tampered with when an attempt is made to remove the label from the rack. The printable area is 69.85 mm wide and 50.8 mm MARKINGS (TEXT) X See the Attached Photograph and Exhibit 3 for the actual location of the FCC/IC label on the device. X Label Attached Below. See Attached Drawing. Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 1 SHEET 2 OF 2 *** END ***

Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 1 OF 14 EXHIBIT 9 INTERNAL PHOTOGRAPHS (Pursuant to FCC Part 2.1033(b)(7), 2.1033(c)(12) and RSP 100 Annex C) The following photographs are attached. Exhibit 1. Internal Front View – Transceiver Module 3A 2. Internal Front View – Transceiver Module, Circuit Board, Top View 3B 3. Internal Front View – Transceiver Module, Control Section 3C 4. Internal Front View – Transceiver Module, Exciter Section 3D 5. Internal Front View – Transceiver Module, Receiver Section 3E 6. Internal Front View – Power Amplifier Module, Cover Removed 3F 7. Internal Front View – Power Supply Module 3G 8. Internal Front View – Power Supply Module, Circuit Boards, Top View 3H 9. Internal Front View – Backplane 3I 10. Internal Front View – Transceiver Option Card (TOC) 3J 11. Internal Back View – Transceiver Module 3K 12. Internal Back View – Power Amplifier Module 3L 13. Internal Back View – Power Supply Module, Circuit Boards, Back View 3M 14. Internal Back View – Backplane 3N 15. Internal Back View – Transceiver Option Card (TOC) 3O Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 2 OF 14 Exhibit 3A – Internal Front View – Transceiver Module Transceiver Module without the Transceiver Option Card (TOC) Transceiver Module with the Transceiver Option Card (TOC) Installed Front View of Base Radio Showing Transceiver Module with TOC Installed and Identifying Connections Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 3 OF 14 Exhibit 3B – Internal Front View – Transceiver Module, Circuit Board, Top View Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 4 OF 14 Exhibit 3C – Internal Front View – Transceiver Module, Control Section Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 5 OF 14 Exhibit 3D – Internal Front View – Transceiver Module, Exciter Section Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 6 OF 14 Exhibit 3E – Internal Front View – Transceiver Module, Receiver Section Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 7 OF 14 Exhibit 3F – Internal Front View – Power Amplifier Module, Cover Removed Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 8 OF 14 Exhibit 3G – Internal Front View – Power Supply Module Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 9 OF 14 Exhibit 3H – Internal Front View – Power Supply Module, Circuit Boards, Top View Exhibit 3I – Internal Front View – Backplane Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 10 OF 14 Exhibit 3J – Internal Front View – Transceiver Option Card (TOC) Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 11 OF 14 Exhibit 3K – Internal Back View – Transceiver Module Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 12 OF 14 Exhibit 3L – Internal Back View – Power Amplifier Module Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 13 OF 14 Exhibit 3M – Internal Back View – Power Supply Module, Circuit Boards, Back View Applicant: Motorola Solutions Inc FCC ID: ABZ89FC4821C / IC: 109AB-4821C EXHIBIT 3 SHEET 14 OF 14 Exhibit 3N – Internal Back View – Backplane Exhibit 3O – Internal Back View – Transceiver Option Card (TOC)

Motorola Solutions Canada, Inc. UPN Number: 4821C Company Number: 109AB HVIN: T7039-UHFR1C Page 1 RF Exposure Technical Brief This Technical Brief calculates the minimum separation distance from an antenna, connected to the subject base station, such that the power density value listed in RSS-102, Radio Frequency (RF) Exposure Compliance of Radiocommunications Apparatus (All Frequency Bands) Issue 5 Table 6 is not exceeded. The analysis is for a typical installation using a structure mounted antenna. Within the frequency range that the subject equipment operates, 406.1 MHz – 430 MHz the permitted exposure limit is frequency dependent per the equation 0.6455*sqrt(f). Table 1 lists the maximum permitted exposure limits for the lowest and highest operating frequencies. The smaller maximum permissible exposure limit will be used for the computation because it requires a larger separation distance from the antenna to the exposed person. Table 1 - Maximum Permissible Exposure Limits Controlled Environment Frequency 406.1 MHz 430 MHz Limit 13.0 W/m 2 13.4 W/m 2 Example Calculations for GTR8000, UHF Transmitter: The example configuration is a single frequency site, with minimal RF network losses, set to zero for this example, between the transmitter output connector and the antenna input connector. The antenna has an omni directional pattern in the horizontal plane. Table 2 lists the key RF system and antenna parameters. Table 2 - Transmitter Configuration Frequency 406.1-435 MHz Base Station Output Power 110 W RF Network Loss 0 dB Antenna Type DS3X00P36U-D 0 dBd / 2.1 dBi (Omni) Antenna length 0.91 m Controlled Environment: Cylindrical Method 1 Using Equation 1 the spatially averaged plane-wave equivalent power density parallel to the antenna in the vertical plane is estimated by dividing the net input power to the antenna by the surface area of an imaginary cylinder at a distance R from the antenna, with the height of the cylinder equal to the length of the antenna 2 . Rh Pnet S π2 = (1) 1 Federal Communications Commission Office of Engineering & Technology, OET Bulletin 65, “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields”, Edition 97-01, page 32, Tell’s cylindrical model. 2 Federal Communications Commission Office of Engineering & Technology, OET Bulletin 65, “Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields”, Edition 97-01, page 32, Tell’s cylindrical model. Motorola Solutions Canada, Inc. UPN Number: 4821C Company Number: 109AB HVIN: T7039-UHFR1C Page 2 Where: S = power density, W/m 2 Pnet = net input power to the antenna, W R = radial distance from the antenna, m h = height of the antenna, m The minimum separation distance can be found by solving Equation 1 for R and setting S to the smaller maximum power density for the environment per Table 1. 48.1 91.00.132 110 2 = ×× = = π π hS Pnet R m (2) For the example site configuration the minimum separation distance for a controlled environment is 1.48 m.

Rep Rep MO Mot Plot Muk Pen Dat Re p Ma n Ma n Re q Pro Pro Mo d Fre q Firm Lo w Ap p App IS E FCC The This r Comm port Template D port Template R OTOROLA PE torola Solutio t 2A, Medan B kim 12 S.W.D nang, Malaysia e/s Tested port Issue Date nufacturer nufacturer Ad questor duct T ype duct Version del Number (H quency Band mware Versio w / Max RF Ou plicant Name plicant Addres ED Registratio C Registration e equipment w (LMR ) FCC 47 C F ISED RSS- report shall no m. Laboratory. Prepared B _________ Gan Boon Test Perso Document Num Revision Numb ENANG ADV. ns Malaysia S Bayan Lepas, D, 11900 Bayan a. e ddress (PMN) HVIN) n (FVIN) utput Power ss ns ns was tested acco FR Part 90 - 119 Issue 12 ot be reproduce . The results a By: ____________ n Teong onnel mber: FCD-00 ber: Rev. K . COMM. LA SDN BHD, n Lepas, : 1 : 3 : M : P L : T : B : G : T : : 3 3 : 2 : : M 8 F : : M 4 ordance to the ed without writ and statements ______ 84 BORATORY 5-JAN-2020 - 0-MAR-2020 Motorola Soluti Plot 2A, Medan Lepas, Penang, TEH TIAN HO Base Station GTR 8000 T7039A (T7039 80-435 MHz 5.00.09 Watts / 110 W Motorola Soluti 000 West Sunr Fort Lauderdale MY0001 61337 e requirement ten approval f r contained in th Y 5-MAR-2020 ions Malaysia n Bayan Lepas, Malaysia ONG 9-UHFR1C) Watts ions Inc rise Boulevard e, Florida 3332 listed below: rom an official his report perta FCC / ISED Report Rev i SDN BHD , Mukim 12 SW d, 22. PA S lly designated r ain only to the d App Vi n Dep R TEST REPO ision WD, 11900 Bay SS representative device(s) evalu proved Signato ncent Foong C puty Technica Report ID: 19 FCC ID: AB IC: ORT : Rev.B yan of the Motorol uated. ory: Chuen Kit al Manager 9587-RF-00007 BZ89FC4821C 109AB-4821C Page 1 o la Penang Adv 7 C C of 186 v. Report Template Document Number: FCD-0084 Report ID: 19587-RF-00007 Report Template Revision Number: Rev. K FCC ID: ABZ89FC4821C IC: 109AB-4821C Page 2 of 186 Table of Contents Report Revision History ............................................................................................................................................... 3 1.0 General Information .......................................................................................................................................... 4 2.0 Summary of Test Results .................................................................................................................................. 5 3.0 Measurement Uncertainty ................................................................................................................................. 6 4.0 Equipment List .................................................................................................................................................. 7 5.0 Test Condition ................................................................................................................................................. 10 5.1. Transmitter Test Conditions ................................................................................................................. 10 6.0 Transmitter Test Parameters ........................................................................................................................... 11 6.1. RF Output Power .................................................................................................................................. 11 6.1.1. Test Setup............................................................................................................................................ 11 6.1.2. Test Result .......................................................................................................................................... 12 6.2. Frequency Stability ............................................................................................................................... 13 6.2.1. Test Setup............................................................................................................................................ 13 6.2.2. Test Result .......................................................................................................................................... 14 6.2.3. Test Limit ............................................................................................................................................ 19 6.3. Audio Frequency Response .................................................................................................................. 20 6.3.1. Test Setup............................................................................................................................................ 20 6.3.2. Test Result .......................................................................................................................................... 21 6.3.3. Test Limit ............................................................................................................................................ 22 6.4. Audio Low Pass Filter Response .......................................................................................................... 23 6.4.1. Test Setup............................................................................................................................................ 23 6.4.2. Test Result .......................................................................................................................................... 24 6.4.3. Test Limit ............................................................................................................................................ 25 6.5. Modulation Limiting ............................................................................................................................. 26 6.5.1. Test Setup............................................................................................................................................ 26 6.5.2. Test Result ...............................................................…

Text truncated - open the document above for the full version.

Report Template Document Number : FCD-0085 Report ID: 19587-RF-00007 Report Template Revision Number : Rev. L FCC ID: ABZ89FC4821C IC: 109AB-4821C 1 MOTOROLA PENANG ADV. COMM. LABORATORY FCC / ISED TEST REPORT Motorola Solutions Malaysia Sdn Bhd Report Revision : Rev.B Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas Penang, MALAYSIA Date/s Tested : 15-JAN-2020 - 3-FEB-2020 Manufacturer : Motorola Solutions Malaysia SDN BHD Manufacturer Address : Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia Requestor : TEH TIAN HONG Product Type : Base Station Model Number : T7039A (T7039-UHFR1C) Frequency Band : 380-435 MHz Firmware Version Max RF Output Power : : 35.00.09 110 Watts Applicant Name Applicant Address : : Motorola Solution Inc 1301 E.Algonquin Road, Room 1043, Schamburg, IL, 60196 ISED Registrations FCC Registrations : : MY0001 461337 The equipment was tested accordance to the requirement listed below: (LMR ) FCC 47 CFR Part 15B / RSS Gen Issue 5 PASS This report shall not be reproduced without written approval from an officially designated representative of the Motorola Penang Adv. Comm. Laboratory. The results and statements contained in this report pertain only to the device(s) evaluated. Prepared By: Approved Signatory : _________________________ _________________________ Gan Boon Teong Vincent Foong Chuen Kit Test Personnel Deputy Technical Manager Report Template Document Number : FCD-0085 Report ID: 19587-RF-00007 Report Template Revision Number : Rev. L FCC ID: ABZ89FC4821C IC: 109AB-4821C 2 Table of Contents 1.0. General Information ................................................................................................................................. 3 2.0. Summary of Test Results ......................................................................................................................... 3 3.0. Measurement Uncertainty ........................................................................................................................ 3 4.0. Equipment List ......................................................................................................................................... 4 5.0. Test Condition .......................................................................................................................................... 5 5.1 Receiver Test Conditions .................................................................................................................. 5 6.0. Receiver Test Parameters ......................................................................................................................... 6 6.1. Conducted Spurious Output Power .......................................................................................................... 6 6.1.1. Test Setup ................................................................................................................................ 6 6.1.2. Test Result ............................................................................................................................... 7 6.1.3. Test Limit ............................................................................................................................... 14 6.2. Radiated Spurious Output Power ........................................................................................................... 15 6.2.1. Test Setup .............................................................................................................................. 15 6.2.2. Test Result ............................................................................................................................. 16 6.2.3. Test Limit ............................................................................................................................... 32 6.3. AC Power Line Conducted Sp…

Text truncated - open the document above for the full version.