ABZ99FT3045CP200 VHF Portable Radio

Commercial SeriesTwo-Way Radio User GuideFrench goes hereCP200 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2002. All rights reserved. Printed in U.S.A.Motorola, Le logo stylisé M, et intelligence universelle sont des marques de Motorola, Inc.© 2002 Motorola, Inc. Tous droits réservés. Imprimé aux États-Unis. *6880309N60*6880309N60-O 309N60-O_cvr.qxd 9/12/2002 10:56 AM Page 1 1 English CONTENTS CONTENTS Computer Software Copyrights . . . . . . . . . . 2Safety and Warranty . . . . . . . . . . . . . . . . . 3Product Safety and RF Exposure Compliance . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Information . . . . . . . . . . . . . . . . . . . 3 Charging Batteries . . . . . . . . . . . . . . . . . 3 Limited Warranty . . . . . . . . . . . . . . . . . . . . . 4Radio Overview . . . . . . . . . . . . . . . . . . . . . 9Parts of the Radio . . . . . . . . . . . . . . . . . . . . 9 CP200™ Model . . . . . . . . . . . . . . . . . . . 9On/Off/Volume Knob . . . . . . . . . . . . . . 10Channel Selector Knob . . . . . . . . . . . . 10Push-to-Talk (PTT) Button . . . . . . . . . . 10Microphone . . . . . . . . . . . . . . . . . . . . . 10LED Indicator . . . . . . . . . . . . . . . . . . . . 10Programmable Buttons . . . . . . . . . . . . 11 Indicator Tones . . . . . . . . . . . . . . . . . . . . . 13Audio Indicators for Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Improved Audio Features . . . . . . . . . . . . . 14 Companding. . . . . . . . . . . . . . . . . . . . . 14 Getting Started . . . . . . . . . . . . . . . . . . . . 15Battery Information . . . . . . . . . . . . . . . . . . 15 Charging Your Battery . . . . . . . . . . . . . 15Wall Charger . . . . . . . . . . . . . . . . . . . . 15 Desktop Charger . . . . . . . . . . . . . . . . . 16 Accessory Information . . . . . . . . . . . . . . . 17 Attaching the Battery . . . . . . . . . . . . . . 17Removing the Battery . . . . . . . . . . . . . 17Attaching the Antenna . . . . . . . . . . . . . 18Removing the Antenna . . . . . . . . . . . . 18Attaching the Belt Clip . . . . . . . . . . . . . 19Removing the Belt Clip . . . . . . . . . . . . 19 Turning the Radio On or Off . . . . . . . . . . . 20Adjusting the Volume . . . . . . . . . . . . . . . . 20Selecting a Radio Channel . . . . . . . . . . . . 20Sending a Call . . . . . . . . . . . . . . . . . . . . . 21Receiving a Call . . . . . . . . . . . . . . . . . . . . 21Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . 21Radio Calls . . . . . . . . . . . . . . . . . . . . . . . 23Repeater or Talkaround Mode . . . . . . . . . 23Setting Tight or Normal Squelch. . . . . . . . 23Setting the Power Level . . . . . . . . . . . . . . 23Receiving a Selective Call . . . . . . . . . . . . 24Receiving a Call Alert Page . . . . . . . . . . . 24Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Starting or Stopping Scan. . . . . . . . . . . . . 25Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . 25Deleting a Nuisance Channel . . . . . . . . . . 25 Restoring a Channel to the Scan List . 25 Prioritizing a Scan List Member . . . . . . . . 26 Non-displayTOC.fm Page 1 Thur sday, September 19, 2002 4:59 PM 2 English CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . 27Carry Accessories. . . . . . . . . . . . . . . . . . . 27Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . 27Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 27Headsets . . . . . . . . . . . . . . . . . . . . . . . . . 28Surveillance Accessories . . . . . . . . . . . . . 28Remote Speaker Microphones . . . . . . . . . 29Antennas . . . . . . . . . . . . . . . . . . . . . . . . . 29 COMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Non-displayTOC.fm Page 2 Thur sday, September 19, 2002 4:59 PM 3 English SAFETY AND WARRANTY SAFETY AND WARRANTY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68P81095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/index.shtml. BATTERY INFORMATIONCharging BatteriesThis product is powered by a nickel-cadmium (NICd) or lithium-ion (Lilon) rechargeable battery. Charge the battery before use to ensure optimum capacity and performance. The battery was designed specifically to be used with a Motorola charger. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty.Note: When charging a battery attached to a radio, turn the radio off to ensure a full charge. The b…

Text truncated - open the document above for the full version.

English Product Safety and RF Exposure for Portable Two-Way Radios The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. For radios that have been approved as intrinsically safe, read the instructions and information on intrinsic safety on page 9 of this booklet. Compliance with RF Energy Exposure Standards NOTICE: This radio is intended for use in occupational/controlled applications where users have been made aware of the potential for exposure and can exercise control over their exposure. This radio device is NOT authorized for general population, consumer or similar use. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ! C a u t i o n © Motorola, Inc. 2002. Commercial, Government and Industrial Solutions Sector 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 Printed in U.S.A. 07/02. All Rights Reserved.

68P81095C98-O 2 English Federal Communication Commission (FCC) Regulations The FCC has established limits for safe exposure to radio frequency (RF) emissions from portable two-way radios. The FCC requires manufacturers to demonstrate compliance with RF exposure limits before portable two-way radios can be marketed in the U.S. When two-way radios are approved for occupational/ controlled environment exposure limits, the FCC requires users to be fully aware of, and exercise control over, their exposure. Awareness and control of RF exposure can be accomplished by the use of labels, or by education and training through appropriate means, such as information and instructions in user manuals or safety booklets. Your Motorola two-way radio has an RF exposure information label in the battery compartment. This user safety booklet includes useful information about RF exposure and helpful instructions on how to control your RF exposure. Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at usage factors of up to 50% talk–50% listen. In terms of measuring RF energy for compliance with FCC exposure guidelines, your radio radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. NOTE:The approved batteries, supplied with this radio, are rated for a 5-5-90 duty cycle (5% talk–5% listen–90% standby), even though this radio complies with FCC occupational exposure limits at usage factors of up to 50% talk. 3 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard, 2001 • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular and PCS product certification.” Compliance and Control Guidelines and Operating Instructions for Portable Two-Way Radios To control your exposure and ensure compliance with the occupational/ controlled environment exposure limits, always adhere to the following procedures: •Transmit no more than 50% of the time. To transmit (talk), push the Push- To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time or less is important since the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance). 4 English •Hold the radio in a vertical position in front of the face with the microphone (and other parts of the radio including the antenna) at least one to two inches (2.5 to 5 centimeters) away from the lips. Keeping the radio at a proper distance is important since RF exposures decrease with distance from the antenna. •For body-worn operation, always place the radio in a Motorola-approved clip, holder, holster, case, or body harness for this product. Using non– Motorola-approved accessories may result in exposure levels which exceed the FCC’s occupational/controlled environment RF exposure limits. •If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, ensure the antenna and the radio are kept one inch (2.5 centimeters) from the body when transmitting. Keeping the radio at a proper distance is important since RF exposures decrease with distance from the antenna. •Use only Motorola-approved supplied or replacement antennas, batteries, and accessories. Use of non–Motorola-approved antennas, batteries and accessories may exceed FCC RF exposure guidelines. For a list of Motorola- approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/cgiss/twowayradio.shtml For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth . 5 English Electromagnetic Interference/Compatibility NOTE:Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured …

Text truncated - open the document above for the full version.

MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 2 SHEET 1 OF 1 CERTIFICATION OF DATA Pursuant to 47 CFR 2.1517(g) The technical data supplied with this application, having been taken under my supervision, is hereby duly certified. The following is a statement of my qualifications: 1) I have received a BSEE degree in Electrical Engineering from Northwestern University, Evanston, Illinois. 2) I have 29 years experience in developing, testing and certifying Land Mobile Communications Products. NAME: James M. Zima SIGNATURE: DATE: September 23, 2002 POSITION: Principal Staff Engineer I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct: NAME: James M. Dodis SIGNATURE: DATE: September 23, 2002 POSITION: Engineering Manager

MOTOROLA INC. FCC ID: ABZ99FT3045 LIST OF EXHIBITS FCC 47 CFR DESCRIPTION EXHIBIT REFERENCE I. Identification Label Information 1 2.925(a), 2.1033(c)(11), 2.1065 General Information 1A 1. Production Plans 2. Application References 2.1061 3. Data Submittal Procedure II. Certification of Data 2 III. External Photographs 3 2.1033(c)(12) IV. Circuit Descriptions 4 2.1033(c)(10) 1. Means for Frequency Stabilization 4A 2. Means for Limiting Modulation 4B 3. Means for Attenuation of Higher Audio Frequencies 4C 4. Means for Attenuation of Spurious Emissions 4D 5. Means for Limiting Power Output 4E 6. Modulation Techniques 4F 7. Means for Controlling Transient Frequency Behavior 4G V. Schematic Diagrams 5 2.1033(c)(10) 1. Transmitter Audio, PL/DPL/DTMF/Trunking 5A 2. Microprocessor/Controller 5B 3. Fractional-N Synthesizer, Reference Oscillator 5C 4. VCO’s, Buffers and Modulator 5D 5. RF Power Amp/LPF/Antenna Switch, Power Control 5E VI. Test Report 6 1. Data Index 6 2. RF Output Data 6A 2.1046(a) 3. Modulation Characteristics A. Audio Response & Low Pass Filter Response 6B, 6C 2.1047(a) B. Modulation Limiting 6D 2.1047(b) 4. Occupied Bandwidth 6E 2.1049(c)(1) 5. Conducted Spurious Emissions 6F 2.1051 6. Radiated Spurious Emissions 6G 2.1053 7. Frequency Stability A. Frequency Stability vs. Temperature 6H-1 2.1055(a,b) B. Frequency Stability vs. Voltage 6H-2 2.1055(d) 8. Transient Frequency Behavior 6I 90.214 MOTOROLA INC. FCC ID: ABZ99FT3045 LIST OF EXHIBITS (CONTINUED) FCC 47 CFR DESCRIPTION EXHIBIT REFERENCE VII. Test Set-up Procedures 7 2.1033(c)(14) VIII. Users Manual 8A 2.1033(c)(3) RF Safety Booklet 8B IX. Internal Photographs 9 2.1033(c)(12) X. Parts List and Tune Up Procedures 10 1. Function of RF Semiconductors & Active Devices 10A 2.1033(c)(10) 2. List of Recommended Test Equipment for Servicing 10B 3. Tune Up Information 10C 2.1033(c)(9) XI. RF Exposure Information 11A 2.1093 S.A.R. EME Compliance Test Report 11B XII. Operational Description 12 2.1033(c)(4-7) 1. Technical Characteristics 2. Application XIII. Cover Letter 13

EXHIBIT 13A SHEET 1 OF 1 FCC ID: ABZ99FT3045 Date: September 24, 2002 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3045 Dear Sir or Madam: Motorola Inc., 1313 East Algonquin Road, Schaumburg, Illinois, herein submits application for Certification of the equipment identified by FCC ID number ABZ99FT3045. This transmitter is primarily intended for use in a portable radio application with capabilities for conventional communications with a conducted transmit power which is adjustable from 1 Watt (+30 dBm) to 5.8 Watts (+37.6 dBm). The subject transmitter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible external controls of the unit. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

EXHIBIT 13B SHEET 1 OF 1 FCC ID: ABZ99FT3045 REQUEST FOR CONFIDENTIALITY Date: September 24, 2002 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3045 Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 3 SHEET 1 OF 4 FRONT VIEW WITH ANTENNA ATTACHED CP200 MODEL MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 3 SHEET 2 OF 4 REAR VIEW WITH BATTERY AND ANTENNA ATTACHED CP200 MODEL MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 3 SHEET 3 OF 4 REAR VIEW WITH BATTERY REMOVED SHOWING FCC ID LABEL AND RF SAFETY LABEL MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 3 SHEET 4 OF 4 REAR VIEW WITH BATTERY REMOVED SHOWING FCC ID LABEL AND RF SAFETY LABEL (CLOSE-UP)

MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 1 SHEET 1 OF 2 IDENTIFICATION LABEL Pursuant to 47 CFR 2.925(a), 2.1033(c), 2.1065 LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the outside of the cast housing at the bottom rear of the unit. Shown below is a photo of the actual label affixed to the cast housing of the transmitter. TYPE The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with a minimum peel strength of 40 oz/inch. MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 1 SHEET 2 OF 2 EXHIBIT 1A - GENERAL INFORMATION 1. Production Plans: Quantity production is planned. 2. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Section 2.1033-2.1057, and Part 90, Section 90.210 3. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commission’s rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Parts 22, 74 and 90. Maximum transmitter power shall not be adjustable by the user.

MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 9 SHEET 1 OF 4 REAR VIEW WITH CIRCUIT BOARD REMOVED FROM HOUSING (MATING SURFACES OF BOARD AND HOUSING ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 9 SHEET 2 OF 4 VIEW OF CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 9 SHEET 3 OF 4 VIEW OF CHASSIS-SIDE OF CIRCUIT BOARD WITH ALL SHIELDS REMOVED MOTOROLA INC FCC ID: ABZ99FT3045 EXHIBIT 9 SHEET 4 OF 4 VIEW OF HOUSING-SIDE OF CIRCUIT BOARD WITH ALL SHIELDS REMOVED

MOTOROLA INC. FCC ID: ABZ99FT3045 EXHIBIT 11A SHEET 1 OF 1 RF EXPOSURE INFORMATION Pursuant 47 CFR 2.1093 In accordance with 47 CFR 2.1093(c) this transmitter has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1093(d) for portable devices, using measurements per methods stated in 47 CFR 2.1093(d)(3). The complete S.A.R. EME Compliance Test Report is attached as Exhibit 11B.

Certificate Number: 1449-02 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Attention: FCC Date of Report: September 11, 2002 Report Revision: Rev. O Manufacturer: Motorola Product Description: Portable 146-174MHz 1-5W 16 Channel FCC ID: ABZ99FT3045 Device Model: AAH50KDC9AA2AN Test Period: Test Engineer: Author: 8/12/02 –9/6/02 Stephen Whalen Sr. Test En gineer Michael Sailsman EME Regulatory Affairs Liaison Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. /s/ Ken Enger 9/13/02 _______________________________________________________ ______________________ Ken Enger Date Approved Senior Resource Manager, Laboratory Director, CGISS EME Lab Form-SAR-Rpt-Rev. 1.00 Page 1 of 69 TABLE OF CONTENTS 1.0 Introduction 2.0 Reference Standards and Guidelines 3.0 Description of Test Sample 3.1 Test Signal 3.2 Test Output Power 4.0 Description of Test Equipment 4.1 Description of S.A.R Measurement System 4.2 Description of Phantom 4.2.1 Flat Phantom 4.2.2 SAM phantom 4.3 Simulated Tissue Properties 4.3.1 Type of Simulated Tissue 4.3.2 Simulated Tissue Composition 4.4 Test condition 5.0 Description of Test Procedure 5.1 Device Test Positions 5.1.1 Abdomen 5.1.2 Head 5.1.3 Face 5.2 Test Position Photographs 5.3 Probe Scan Procedures 6.0 Measurement Uncertainty 7.0 S.A.R. Test Results 7.1 S.A.R. results 7.2 Peak S.A.R. location 7.3 Highest S.A.R. results calculation methodology 8.0 Conclusion Appendix A: Power Slump Data/Shortened scan Appendix B: Data Results Appendix C: Dipole System Performance Check Results Appendix D: Calibration Certificates Appendix E: Illustration of Body-worn Accessories Appendix F: Accessories and options test status and separation distances Form-SAR-Rpt-Rev. 1.00 Page 2 of 69 REVISION HISTORY Date Revision Comments 9/11/02 O Initial release Prototype results Form-SAR-Rpt-Rev. 1.00 Page 3 of 69 1.0 Introduction This report details the utilization, test setup, test equipment, and test results of the Specific Absorption Rate (S.A.R.) measurements performed at the CGISS EME Test Lab for model number AAH50KDC9AA2AN, FCC ID: ABZ99FT3045. The applicable exposure environment is Occupational/Controlled. The test results included herein represent the highest S.A.R. levels applicable to this product and clearly demonstrate compliance with FCC Occupational/Controlled RF Exposure limits of 8.0 mW/g per the requirements of 47 CFR 2.1093(d). 2.0 Reference Standards and Guidelines This product is designed to comply with the following national and international standards and guidelines. • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Terminal frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Terminal communications (Electromagnetic Radiation - Human Exposure) Standard 2001 • ANATEL, Brazil Regulatory Authority, Resolution 256 (April 11, 2001) "additional requirements for SMR, cellular and PCS product certification." Form-SAR-Rpt-Rev. 1.00 Page 4 of 69 3.0 Description of Test Sample The portable handheld transceiver, FCC ID: ABZ99FT3045, operates using frequency modulation (FM) and incorporates traditional simplex two-way radio transmission protocol. This product is intended for land mobile business users. The intended operating positions are “at the face” with the microphone 1 to 2 inches from the mouth, and “at the abdomen” by means of the offered body-worn accessories. Audio and PTT operation while the radio is at the abdomen is accomplished by means of optional remote accessories that connect to the radio. FCC ID: ABZ99FT3045 is capable of operating in the 146-174 MHz band. The rated power is 1-5 watts with a maximum output capability of 5.8 watts as defined by the upper limit of the production line final test station. Form-SAR-Rpt-Rev. 1.00 Page 5 of 69 FCC ID: ABZ99FT3045 is offered with the following options and accessories: Antenna NAD6502AR Heliflex 146-174MHz ¼ wave; -8.0 dBi HAD9742A Stubby 146-162MHz ¼ wave; -11dBi HAD9743A Stubby 162-174MHz ¼ wave; -11dBi Batteries NNTN4497AR Lithium Ion Battery 1800 mAh NNTN4496AR NiCd Battery 1100 mAh Body-worn Accessories HLN6602A Universal Chest Pack 1505596Z02 Replacement Strap for HLN6602 Universal Chest Pack RLN4570A Break-A-Way Chest Pack RLN4815A Universal Radio Pak 4280384F89 Replacement Belt Lengthener for RLN4815 NTN5243A Shoulder Carry Strap, attaches to D-Shaped Rings on Carry Case PMLN4124A 2.5 inch Spring Belt Clip HLN8255B 3 inch Spring Action Belt Clip HLN9701B Nylon Carry Case with Belt Loop and D-Shaped Rings RLN5383A Leather Carry Case with Belt Loop and D-Shaped Rings RLN5384A Leather Carry Case with High Activity 2.5” Swivel Belt Loop RLN5385A Leather Carry Case with High Activity 3” Swivel Belt Loop Other attachments HMN9030A Remote Speaker Microphone HMN9727B Earpiece without Volume Control - 1 Wire (Beige) RLN4894A Earpiece without Volume Control – 1 wire (Black) HMN9752B Earpiece with Volume Control - 1 Wire (Beige) HMN9754D Earpiece with Microphone & PTT Combined - 2 Wire (Beige) RLN4895A Earpiece with Microphone & PTT Combined – 2 Wire (Black) HMN9036A Earbud with Microphone & PTT Combined HLN9132A Earbud Single Wire Receive Only RLN5198AP 2 Wire Surveillance Kit w/ Clear Comfortable Acoustic Tube Included (includes HMN9754 and NTN8371) BDN6720A Flexible …

Text truncated - open the document above for the full version.

CGISS EME Laboratory responses to FCC correspondence 24358 11/20/02 Q1.) Additional power sloop data. Please include similar data analysis performed on page 21 and 22 of the SAR report for each battery tested. Please clarify if the 6 minutes scan was performed with a fully or partially charged battery. R1.) The requested additional power slump data is presented below. Note that the shortened scan presented on page 22 reflects results from the battery that exhibited the largest power slump. The 6 minutes scan was performed with fully charged batteries. 2.) Photographs for SAR test setups for each body-worn accessory. R2.) The requested photos are presented below. Carry case model PMLN4124A w-NAD6502A antenna, NNTN4496AR battery, and attached HMN9030A RSM A = 39mm B = 45mm C= 50mm Carry Case model HLN8255B W-HAD9743A antenna, NNTN4496AR battery, and attached HMN9030A RSM A = 38mm B = 42mmC = 46mm Carry case model RLN4815A w/ NAD6502AR antenna, NNTN4496AR battery, and attached HMN9030A RSM A = 45mm B = 55mmC = 65mm Carry case model HLN9701B w/ NAD6502A antenna, NNTN4496AR battery, and attached HMN9030A RSM A = 45mm B = 57mmC = 68mm Carry case model RLN5385A w/ NAD66502AR antenna, NNTN4496AR battery, and HMN9030A RSM A = 65mm B = 84mmC = 100mm 3.) SAR plots for worst-case "held to face" configuration. R3.)The requested S.A.R. plot for worst-case “held to the face” configuration is presented below. FCC ID: ABZ99FT3045; Test Date: 09/05/02 Run #: Face-R1-020905-06 Model #: AAH50KDC9AA2AN SN:VP2BA10 TX Freq: 160MHz - Accessories - Antenna: NAD6502A Battery Kit: NNTN4496A Carry: radio @ 2.5cm Audio Acc. None Flat Phantom; Device Section; Position: (90°,90°); Probe: ET3DV6 - SN1547; ConvF(8.60,8.60,8.60); Probe cal date: 11/16/01; Crest factor: 1.0; IEEE Head_160 MHz: σ = 0.74 mho/m ε = 52.9 ρ = 1.00 g/cm3; DAE3: 363-V1 DAE Cal Date: 5/23/02 Cube 5x5x7: SAR (1g): 1.45 mW/g, SAR (10g): 1.10 mW/g, (Worst-case extrapolation) Coarse: Dx = 15.0, Dy = 15.0, Dz = 10.0; Max at 19.5, 168.0, 4.0 4.) Explanation for change in hotspot location between page 22 and page 24 contour plots. R4.) The change in the “hotspot” location is due primarily to the body location for each respective assessment presented. Page 22 shows a 6 minutes shortened scan with the DUT separated 2.5cm from the flat phantom. Page 24 shows a normal scan with the DUT and carry case model HLN6602A against the flat phantom.

MOTOROLA INC. FCC ID: ABZ99FT3045 EXHIBIT 6 INDEX OF SUBMITTED MEASURED DATA This exhibit contains the measured data for this equipment as follows: EXHIBIT 6A - RF Power Output (Table) EXHIBIT 6B - Transmit Audio Response (2 Graphs) 6B-1 – 12.5 kHz Channel Spacing 6B-2 – 25 kHz Channel Spacing EXHIBIT 6C - Transmit Audio Post Limiter Lowpass Filter Response (Graph) EXHIBIT 6D - Modulation Limiting Characteristics (6 Graphs) 6D-1 – 12.5 kHz Carrier Squelch Mode 6D-2 – 12.5 kHz Tone Private Line (CTCSS) Mode 6D-3 – 12.5 kHz Digital Private Line (CDCSS) Mode 6D-4 – 25 kHz Carrier Squelch Mode 6D-5 – 25 kHz Tone Private Line (CTCSS) Mode 6D-6 – 25 kHz Digital Private Line (CDCSS) Mode EXHIBIT 6E - Occupied Bandwidth (18 Spectrum Analyzer Plots) 6E-1 - 12.5 kHz 2500 Hz Audio Modulation Only 6E-2 - 12.5 kHz 2500 Hz Audio and TPL (CTCSS) Modulation 6E-3 - 12.5 kHz 2500 Hz Audio and DPL (CDCSS) Modulation 6E-4 - 12.5 kHz DTMF Modulation Only 6E-5 - 12.5 kHz DTMF Modulation and TPL (CTCSS) Modulation 6E-6 - 12.5 kHz DTMF Modulation and DPL (CDCSS) Modulation 6E-7 - 12.5 kHz 2000/3000 Hz FSK Data Modulation Only 6E-8 - 12.5 kHz 2000/3000 Hz FSK Data and TPL (CTCSS) Modulation 6E-9 - 12.5 kHz 2000/3000 Hz FSK Data and DPL (CDCSS) Modulation 6E-10 - 25 kHz 2500 Hz Audio Modulation Only 6E-11 - 25 kHz 2500 Hz Audio and TPL (CTCSS) Modulation 6E-12 - 25 kHz 2500 Hz Audio and DPL (CDCSS) Modulation 6E-13 - 25 kHz DTMF Modulation Only 6E-14 - 25 kHz DTMF Modulation and TPL (CTCSS) Modulation 6E-15 - 25 kHz DTMF Modulation and DPL (CDCSS) Modulation 6E-16 - 25 kHz 2000/3000 Hz FSK Data Modulation Only 6E-17 - 25 kHz 2000/3000 Hz FSK Data and TPL (CTCSS) Modulation 6E-18 - 25 kHz 2000/3000 Hz FSK Data and DPL (CDCSS) Modulation EXHIBIT 6F - Conducted Spurious Emissions (6 Graphs) 6F-1 - 5.8 Watts, 146.000 MHz 6F-2 - 5.8 Watts, 160.…

Text truncated - open the document above for the full version.