ABZ99FT3080HT1250LS+ 220MHz Portable Radio

Motorola, The Stylized M logo, Professional Radio - As Dedicated As You Are, HT Series,HT1250 • LS + , and Call Alert are trademarks of Motorola, Inc. PassPort is a trademark of Trident Micro Systems.LTR is a trademark of E.F. Johnson Company. © 1999, 2000, 2001 Motorola, Inc. All rights reserved. Printed in U.S.A. *6864110R11*6866110R11-O HT1250 •• LS ++ User Guide Professional Radio - As Dedicated As You Are ™ 6864110R11-O_cvr.qxd 11/30/01 2:09 PM Page 1 1 English CONTENTS CONTENTS Computer Software Copyrights . . . . . . . . . 5Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7User Safety, Training, andGeneral Information . . . . . . . . . . . . . . . . . . 7Compliance with RF Energy ExposureStandards. . . . . . . . . . . . . . . . . . . . . . . . . . 7Operational Instructions and TrainingGuidelines . . . . . . . . . . . . . . . . . . . . . . . . . 8 Transmit and Receive . . . . . . . . . . . . . . 8Hand-held Radio Operation . . . . . . . . . 8Body-worn Operation . . . . . . . . . . . . . . 8Antenna & Batteries . . . . . . . . . . . . . . . 9Approved Accessories . . . . . . . . . . . . . 9 Electromagnetic Interference/Compatibility 9 Facilities . . . . . . . . . . . . . . . . . . . . . . . . 9Aircraft. . . . . . . . . . . . . . . . . . . . . . . . . . 9Medical Devices . . . . . . . . . . . . . . . . . 10Driver Safety . . . . . . . . . . . . . . . . . . . . 10 Operational Warnings . . . . . . . . . . . . . . . 11 For Vehicles With an Air Bag . . . . . . . 11Potentially Explosive Atmospheres . . . 11Blasting Caps and Areas . . . . . . . . . . 11 Operational Cautions. . . . . . . . . . . . . . . . . 12 Antennas . . . . . . . . . . . . . . . . . . . . . . .12Batteries . . . . . . . . . . . . . . . . . . . . . . . . 12 Battery Information . . . . . . . . . . . . . . . . . . 12 Charging Batteries . . . . . . . . . . . . . . . .12 Introduction . . . . . . . . . . . . . . . . . . . . . . .13Trunked Radio Systems . . . . . . . . . . . . . . 13 PassPort™ Trunked Systems . . . . . . . 13LTR™ Trunked Systems . . . . . . . . . . . 13 Conventional Radio Systems . . . . . . . . . .14HT1250•LS+ Radio Features . . . . . . . . . .14 Radio Wide Features . . . . . . . . . . . . . . 14PassPort Zone Features . . . . . . . . . . . 14LTR Zone Features . . . . . . . . . . . . . . . 15Conventional Zone Features . . . . . . . . 15 Radio Overview . . . . . . . . . . . . . . . . . . . . 17Parts of the Radio . . . . . . . . . . . . . . . . . . . 17 HT1250•LS+ Model . . . . . . . . . . . . . . . 17On/Off/Volume Knob . . . . . . . . . . . . . . 18Zone Selector Knob . . . . . . . . . . . . . . . 18LED Indicator . . . . . . . . . . . . . . . . . . . . 18Push-to-Talk (PTT) Button . . . . . . . . . . 18Microphone. . . . . . . . . . . . . . . . . . . . . . 18Menu Keys . . . . . . . . . . . . . . . . . . . . . . 18Keypad Keys . . . . . . . . . . . . . . . . . . . . 19 6864110R11-OTOC.fm Page 1 Tuesday, November 20, 2001 11:56 AM 2 English CONTENTS Display . . . . . . . . . . . . . . . . . . . . . . . . . 21Programmable Buttons . . . . . . . . . . . . 22 Audio Indicators for ProgrammableButtons . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Battery Information . . . . . . . . . . . . . . . . . . 29 Charging the Battery . . . . . . . . . . . . . . 29 Getting Started . . . . . . . . . . . . . . . . . . . . 29 Battery Charge Status . . . . . . . . . . . . . 30Attaching the Battery . . . . . . . . . . . . . . 31Removing the Battery . . . . . . . . . . . . . 31 Accessory Information . . . . . . . . . . . . . . . 31 Attaching the Antenna . . . . . . . . . . . . . 31Removing the Antenna . . . . . . . . . . . . 32Attaching the Belt Clip . . . . . . . . . . . . . 33Removing the Belt Clip . . . . . . . . . . . . 33Attaching the Side Connector Cover . . 34 Turning the Radio On or Off . . . . . . . . . . . 34Adjusting the Volume . . . . . . . . . . . . . . . . 35Selecting a Trunked Zone and Talkgroup. 35Sending a Trunked Call . . . . . . . . . . . . . . 36Selecting a Conventional Zone andChannel . . . . . . . . . . . . . . . . . . . . . . . . . . 37Sending a Conventional Call . . . . . . . . . . 37Receiving a Trunked or Conventional Call 37Repeater or Talkaround J Mode (Conventional Operation Only) . . . . . . . . . 38 Call Light (Trunked Operation Only) . . . . . . . . . . . . 38Home Channel Revert . . . . . . . . . . . . . . . 39Sounding an Emergency Siren . . . . . . . . 39 To Start the Emergency Siren. . . . . . . 39To Stop the Emergency Siren . . . . . . . 39 PASSPORT TRUNKING . . . . . . . . . . . . . 41Seamless Roaming . . . . . . . . . . . . . . . . . 41 Initial Registration . . . . . . . . . . . . . . . . 41Roaming and Registering BetweenSites . . . . . . . . . . . . . . . . . . . . . . . . . . 42Site/MIN View . . . . . . . . . . . . . . . . . . . 43 Roam Request . . . . . . . . . . . . . . . . . . . . . 43 To Start a Roam Request . . . . . . . . . 44To Cancel a Roam Request . . . . . . . . 44 Site Lock . . . . . . . . . . . . . . . . . . . . . . . . . 45 To Start Site Lock . . . . . . . . . . . . . . . . 45To Cancel Site Lock . . . . . . . . . . . . . . 45 Troubleshooting . . . . . . . . . . . . . . . . . . . . 46Making a Selective Call . . . . . . . . . . . . . . 47Radio Calls(Trunked Operation Only) . . . . . . . . . . . 47Receiving a Selective Call F . . . . . . . . . . 48 Receiving a Call Alert Page . . . . . . . . . . . 49 6864110R11-OTOC.fm Page 2 Tuesday, November 20, 2001 11:56 AM 3 English CONTENTS Radio Check(LTR Trunked Operation Only) . . . . . . . . . 49Editing a Radio Call List K . . . . . . . . . . . 50 Name and Call Tone Tagging(LTR Trunked Operation Only) . . . . . . . . . 51 To Tag a Specific User ’ s Name . . . . . . 52 To Tag a Type of Radio Call . . . . . . . . 52 Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . 55PassPort Primary Auto Group Scan . . . . . 56Passport Group Scan G (PassPort Trunked Operatio…

Text truncated - open the document above for the full version.

55 English SCAN SCAN Your radio is equipped with the Scan feature, which allows you to search for, lock onto, and monitor voice activity on trunked talkgroups and conventional channels.There are five types of Scan available in your radio: • Auto Group Scan • All Group Scan • PassPort Primary Auto Scan • Passport Group Scan • System Scan The table below summarizes the Scan types available in each zone type. Shaded areas indicate that Scan can be enabled through a programmable button (see page 22) or through your radio menu. TALKBACKWhen activity is detected during any type of scan, scanning stops and the active talkgroup or channel appears and remains on the display until scanning resumes. Your dealer can program the amount of time you can respond (or “TALKBACK”) to the caller before your radio resumes scanning.You must press the PTT button to participate in the call; otherwise, scanning continues to the other talkgroups or channels. Zone PassPort Primary Auto Scan Pass- Port Group Scan LT R Auto Group Scan LTR All Group Scan System Scan PassPor t Trunked X X LTR Trunked X X X Conven-tional X Zone PassPort Primary Auto Scan Pass- Port Group Scan LTR Auto Group Scan LTR All Group Scan System Scan 56 English SCAN PASSPORT PRIMARY AUTO GROUP SCANPassPort Primary Auto Group Scan automatically scans the primary (first) talkgroup within the selected PassPort zone. Any time you are positioned on a PassPort talkgroup other than the first one, your radio automatically scans activity on the first talkgroup within that zone.Note: This feature is enabled AUTOMATICALLY with your radio. It is not enabled through the radio menu or through a prepro-grammed scan button. PASSPORT GROUP SCAN G (PASSPORT TRUNKED OPERATION ONLY) PassPort Group Scan scans talkgroups within the selected Passport trunked zone, as programmed by your dealer. Up to 16 different talkgroups can be programmed into each Scan list, with one Scan list assigned to each position on the Zone Selector knob. You can edit these Scan lists through your radio ’ s menu (see page 60). When PassPort Group Scan is Enabled• The G symbol appears on the display. • The LED indicator blinks green during PassPort Group Scan operation; it stops blinking when the radio switches to an active talkgroup or channel. Note: • PassPort Group Scan is not available when registered on a non-home site. • If you switch to another PassPort zone, LTR, or conventional zone while the radio is scan-ning, scanning resumes upon return to the PassPort zone where PassPort Group Scan was enabled. • If the radio is turned off while scanning, the radio resumes scanning when you turn it back on. If the radio registers on a non-home site, scanning is not enabled until the radio regis-ters at its home site. 57 English SCAN To Start or Stop PassPort Group Scan Operation through a Preprogrammed Button (see page 22)• Press the preprogrammed Scan button to start PassPort Group Scan. • Press the preprogrammed Scan button again to stop the PassPort Group Scan. –or–To Start or Stop PassPort Group Scan Operation through the Menu AUTO GROUP SCAN G (LTR TRUNKED OPERATION ONLY)Auto Group Scan automatically scans talkgroups within an LTR trunked zone as programmed by your dealer. Auto Group Scan can be either non-prioritized or prioritized. • Non-prioritized Auto Group Scan automatically scans all talkgroups programmed with Auto Group Scan. • Prioritized Auto Group Scan automatically scans the selected talkgroup and all lower 4-numbered talkgroups. For example, if talkgroups 1, 3, and 4 have been programmed by your dealer with Auto Group Scan and talkgroup 4 is selected, the radio automatically scans talkgroups 1, 3, and 4, and skips talkgroup 2. To Start Auto Group ScanSelect a talkgroup that has been programmed for Auto Group Scan by your dealer. Note: You do not need to press a preprogrammed Scan button. 1 ) to enter menu mode. 2 + or ? until 3 ) to select You see the current scan status. 4 + or ? until – or – 5 ) to confirm your selection. 3DVV*US6FDQ 3DVV *US6FDQ 3S*S6 FDQ2II" 3S*S6FD Q2Q" 58 English SCAN • The G symbol appears on the display when non-prioritized Auto Group Scan has been activated. • The H symbol appears on the display when prioritized Auto Group Scan has been activated. • There is no LED indicator during Auto Group Scan. To Stop Auto Group ScanSelect a talkgroup that has not been programmed for Auto Group Scan by your dealer.ALL GROUP SCAN G (LTR TRUNKED OPERATION ONLY)All Group Scan scans all talkgroups within the selected LTR trunked zone. When All Group Scan is enabled:• The G symbol appears on the display. • The LED indicator blinks green during All Group Scan operation; it stops blinking when the radio switches to an active talk-group. Note: If you enter menu mode while the radio is scanning, scanning stops. It resumes when you exit menu mode. To Start or Stop All Group Scan Operation through the Menu (see page 22)• Press the preprogrammed All Group Scan button once to start All Group Scan. • Press the preprogrammed All Group Scan button again to stop All Group Scan. – or – To Start or Stop All Group Scan Operation through the Menu 1 ) to enter menu mode. 2 + or ? until 3 ) to select You see the current scan status. 4 + or ? until – or – 5 ) to confirm your selection. $OO* URXS6FDQ $OO*U RXS6FDQ $OO*U RXS2Q" $OO*U RXS2II" 59 English SCAN SYSTEM SCAN G (LTR TRUNKED AND CONVENTIONAL OPERATION)System Scan scans trunked talkgroups and conventional channels between LTR and conventional zones, as programmed by your dealer. Up to 16 different talkgroups or conventional channels can be programmed into each Scan list. You can edit these lists through your radio ’ s menu (see page 60). When System Scan is Enabled• The G symbol appears on the display. • The LED indicator blinks green during Sys-tem Scan operation; it stops blinking when the radio switches to an active talkgroup or channel. Note: If you enter menu mode while the radio is scanning, scanning stops. …

Text truncated - open the document above for the full version.

MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 2 SHEET 1 OF 1 CERTIFICATION OF DATA Pursuant to CFR 47 2.1517(g) The technical data supplied with this application, having been taken under my supervision, is hereby duly certified. The following is a statement of my qualifications: 1) I have received a BSEE degree in Electrical Engineering from Northwestern University, Evanston, Illinois. 2) I have 29 years experience in developing, testing and certifying Land Mobile Communications Products. NAME: James M. Zima SIGNATURE: DATE: February 18, 2002 POSITION: Senior Staff Engineer I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct: NAME: Jean-Robert Achille SIGNATURE: DATE: February 18, 2002 POSITION: Engineering Section Manager

MOTOROLA INC. FCC ID: ABZ99FT3080 LIST OF EXHIBITS FCC 47 CFR DESCRIPTION EXHIBIT REFERENCE I. Identification Label Information 1 2.925(a), 2.1033(c)(11), 2.1065 General Information 1A 1. Production Plans 2. Application References 2.1061 3. Data Submittal Procedure II. Certification of Data 2 III. External Photographs 3 2.1033(c)(12) IV. Circuit Descriptions 4 2.1033(c)(10) 1. Means for Frequency Stabilization 4A 2. Means for Limiting Modulation 4B 3. Means for Attenuation of Higher Audio Frequencies 4C 4. Means for Attenuation of Spurious Emissions 4D 5. Means for Limiting Power Output 4E 6. Modulation Techniques 4F 7. Means for Controlling Transient Frequency Behavior 4G V. Schematic Diagrams 5 2.1033(c)(10) 1. Transmitter Audio, PL/DPL/DTMF/Trunking 5A 2. Microprocessor/Controller 5B 3. Fractional-N Synthesizer, Reference Oscillator 5C 4. VCO’s, Buffers and Modulator 5D 5. RF Power Amp/LPF/Antenna Switch, Power Control 5E VI. Test Report 6 1. Data Index 6 2. RF Output Data 6A 2.1046(a) 3. Modulation Characteristics A. Audio Response & Low Pass Filter Response 6B, 6C 2.1047(a) B. Modulation Limiting 6D 2.1047(b) 4. Occupied Bandwidth 6E 2.1049(c)(1) 5. Conducted Spurious Emissions 6F 2.1051 6. Radiated Spurious Emissions 6G 2.1053 7. Frequency Stability A. Frequency Stability vs. Temperature 6H-1 2.1055(a,b) B. Frequency Stability vs. Voltage 6H-2 2.1055(d) MOTOROLA INC. FCC ID: ABZ99FT3080 LIST OF EXHIBITS (CONTINUED) FCC 47 CFR DESCRIPTION EXHIBIT REFERENCE VII. Test Set-up Procedures 7 2.1033(c)(14) VIII. Instruction Manual 8 2.1033(c)(3) IX. Internal Photographs 9 2.1033(c)(12) X. Parts List and Tune Up Procedures 10 1. Function of RF Semiconductors & Active Devices 10A 2.1033(c)(10) 2. List of Recommended Test Equipment for Servicing 10B 3. Tune Up Information 10C 2.1033(c)(9) XI. RF Exposure Information 11A 2.1093 S.A.R. EME Compliance Test Report 11B XII. Operational Description 12 2.1033(c)(4-7) 1. Technical Characteristics 2. Application XIII. Cover Letter 13A Request for Confidentiality 13B

EXHIBIT 13A SHEET 1 OF 2 FCC ID: ABZ99FT3080 Date: February 18, 2002 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3080 Gentlemen: Motorola Inc., 5201 Tollview Drive, Rolling Meadows, Illinois, herein submits application for Certification of the equipment identified by FCC ID number ABZ99FT3080. This transmitter is primarily intended for use in a portable radio application with capabilities for conventional and trunked communications with a transmit power of 1 Watt (+30 dBm) or 5.5 Watts (+37.4 dBm). The subject transmitter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible external controls of the unit. On December 6, 2001, representatives from Motorola Inc. and one of our customers met with the Commercial Wireless Division to discuss our intention for the use of this equipment, utilizing 12.5 kHz channel spacing with + 2.5 ppm frequency stability, in the 220-222 MHz band. In attendance were representatives from the FCC’s Equipment Authorization Branch and from the Wireless Telecommunications Bureau. At that time we presented an analysis to demonstrate that our intended operation of this equipment would not impact existing 5 kHz users in this band, in that the undesired emissions from our equipment, operating under the frequency assignment guidelines we propose, would not exceed the undesired emissions level from an adjacent 5 kHz user, even if the effects of + 2.5 ppm stability were included. We indicated that the subject transmitter is similar to that previously certified under FCC ID: AZ489FT3794, except having been redesigned for operation in the 217-218, 219-220 and 220-222 MHz bands, and for 12.5 kHz channel spacing only. Because the subject transmitter complies with all applicable rules, and no request for a change of rules was made, it was felt that Certification was achievable. EXHIBIT 13A SHEET 2 OF 2 We are requesting Certification under Part 80 as well as Part 90 of the Commission’s Rules to allow operation of this equipment in the 217-218 MHz and 219-220 MHz AMTS bands, per CFR Title 47 Part 80.385. This equipment meets or exceeds the technical requirements of CFR Title 47 Part 80 Subpart E. The equivalence of G3E phase modulation emission is achieved by frequency modulation with pre-emphasis. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

EXHIBIT 13B SHEET 1 OF 1 FCC ID: ABZ99FT3080 REQUEST FOR CONFIDENTIALITY Date: February 18, 2002 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3080 Gentlemen: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures) and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola is in the process of licensing the technology employed. Please mark Exhibits 4, 5, 10 and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 1 OF 6 REPLY TO CORRESPONDENCE REFERENCE NUMBER: 22775 FCC ID: ABZ99FT3080 Form 731 Confirmation Number: EA216745 HT1250•LS+ 200 MHz Portable Radio April 17, 2002 Motorola Inc. herein submits its response to the May 2, 2002 request for information in Correspondence Number 22775. Q1.) Please submit internal photos with all shield removed. R1.) The requested photos are attached as follows: PAGE 3 – Figure 1 - View of Circuit Board As Shown in Exhibit 9 Sheet 1 of 2 With All Shields Removed PAGE 4 – Figure 2 - View of Circuit Board As Shown in Exhibit 9 Sheet 2 of 2 With All Shields Removed Q2.) The rule part in the line items Tech Specs were blank. You have three line items in Tech Specs. Please specify the rule parts for each line item. Note: 217-220 MHz is authorized for telemetry in Part 90. This device is PTT. Please explain. R2.) There was a typographical error made in the first line item entry of the frequency ranges in Item 13 of the 731 Form. We apologize for the error. The frequency ranges we are requesting in this application, with the applicable FCC Rule Part for each range, are as follows: Frequency Range FCC Rules Part Power Tolerance Emissions 217 – 218 MHz 80 and 90 5.5 Watts +2.5 ppm 11K0F3E 219 – 220 MHz 80 and 90 5.5 Watts +2.5 ppm 11K0F3E 220 – 222 MHz 90 5.5 Watts +2.5 ppm 11K0F3E We are not requesting telemetry operation in the 218-219 MHz band. Q3.) Test report used emission mask 90.210(d) . Please resubmit all bandwidth plots using emission mask 90.210(f). R3.) In accordance with FCC Code of Federal Regulations Title 47, Part 90.733 (e), this equipment utilizes authorized contiguous 5 kHz channels which are combined to form wider channels suitable for the operation of 12.5 kHz channel spacing equipment. It was demonstrated to the Commission’s satisfaction, in a meeting on December 6, 2001, that the interference level to adjacent 5 kHz users from our equipment was less than or equal to interference from another adjacent 5 kHz user, when operated in accordance with our intended channel implementation, which includes the use of “guard channels” as well as geographic considerations to prevent interference. This satisfies the requirement of meeting the emissions limit of 90.210(f) at the outermost edges of contiguous channels. A summary of the report which was presented to the Commission is attached as follows (this report has been amended to include details identifying the emissions masks for 5 kHz and 12.5 kHz users, which had been conveyed verbally): PAGES 5-6 – Relative Adjacent Channel Interference Levels MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 2 OF 6 Because our equipment operates at 12.5 kHz channel spacing with a maximum deviation of +2.5 kHz and a necessary bandwidth of 11.0 kHz as calculated in Exhibit 4(F), the supplied occupied bandwidth data was submitted using emissions mask 90.210(d), as is appropriate for this type of modulation. Q4.) You submitted data for high and low power. Is the power switchable or variable. R4.) The power is switchable between two factory-preset power levels. The Programming Software available to the Dealers allows the power level of each channel to be programmed to “Low Power” (1 watt) or “High Power” (5.5 watts) only. For questions Q5.) - Q8.), and our responses R5.) - R8.), please refer to the attached document Reply to 22775 Part 2. Please contact me at (847) 576-3697 if you require any additional information. Sincerely, James M. Zima Principal Staff Engineer Phone: (847) 576-3697 FAX: (847) 538-4312 Email: [email protected] Attachments: IEEE-DosiProbes.pdf SARremindersheet.doc Reply to 22775 Part 2 MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 3 OF 6 Figure 1 - View of Circuit Board As Shown in Exhibit 9 Sheet 1 of 2 With All Shields Removed MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 4 OF 6 Figure 2 - View of Circuit Board As Shown in Exhibit 9 Sheet 2 of 2 With All Shields Removed MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 5 OF 6 RELATIVE ADJACENT CHANNEL INTERFERENCE LEVELS (Refer to Graphical Representation on Following Page) (A) Two Adjacent 5 kHz Users (each 5 kHz user represented by emissions mask D) center frequencies: -2.5 kHz / +2.5 kHz center freq separation: 5 kHz degree of overlap: 11.8% interference level: -9.28 dB (B) 5 kHz User Adjacent to 12.5 kHz User (one full channel from band edge) (5 kHz user represented by emissions mask D at the left) (12.5 kHz user represented by emissions mask F at the right) nominal frequency with 2.5 ppm shift (dashed) 5 kHz center freq: -2.5 kHz -2.5 kHz 12.5 kHz center freq: +12.5 kHz +11.95 kHz center freq separation: 15 kHz 14.45 kHz degree of overlap: 1.5% 2.8% interference level: -18.16 dB -15.51 dB (C) 5 kHz User (with guard channel) Adjacent to 12.5 kHz User (1/2 channel from edge) (5 kHz user represented by emissions mask D at the left) (12.5 kHz user represented by emissions mask F at the right) nominal frequency with 2.5 ppm shift 5 kHz center freq: -7.5 kHz -7.5 kHz 12.5 kHz center freq: +6.25 kHz +5.7 kHz center freq separation: 13.75 kHz 13.2 kHz degree of overlap: 4.9% 8.5% interference level: -13.1 dB -10.7 dB Conclusion: The interference from an adjacent 12.5 kHz user with 2.5 ppm stability is less than the interference from an adjacent 5 kHz user. jz 11-04-01 MOTOROLA INC. FCC ID: ABZ99FT3080 PAGE 6 OF 6 -80 -70 -60 -50 -40 -30 -20 -10 0 -10-505101520 Offset (kHz) Attenuation (dB) -80 -70 -60 -50 -40 -30 -20 -10 0 -10-505101520 Offset (kHz) Attenuation (dB) -80 -70 -60 -50 -40 -30 -20 -10 0 -10-505101520 Offset (kHz) Attenuation (dB) (A) Two Adjacent 5 kHz Users (B) 5 kHz User Adjacent to 12.5 kHz User (one full channel from band edge) (C) 5 kHz User (with guard channel) Adjacent to 12.5 kHz User (1/2 channel from band edge)

MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 3 SHEET 1 OF 5 FRONT VIEW WITH ANTENNA ATTACHED HT1250•LS+ FULL KEYPAD MODEL SHOWN MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 3 SHEET 2 OF 5 GENERAL VIEWS WITH ANTENNA REMOVED HT1250•LS+ FULL KEYPAD MODEL (LEFT) HT1250•LS+ LIMITED KEYPAD MODEL (RIGHT) MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 3 SHEET 3 OF 5 REAR VIEW WITH BATTERY ATTACHED MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 3 SHEET 4 OF 5 REAR VIEW WITH BATTERY REMOVED SHOWING FCC ID LABEL MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 3 SHEET 5 OF 5 REAR VIEW WITH BATTERY REMOVED SHOWING FCC ID LABEL (CLOSE-UP)

MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 1 SHEET 1 OF 2 IDENTIFICATION LABEL Pursuant to 47 CFR 2.925(a), 2.1033(c), 2.1065 LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the outside of the cast housing at the bottom rear of the unit. Shown below is a photo of the actual label affixed to the cast housing of the transmitter. TYPE The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with a minimum peel strength of 40 oz/inch. MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 1 SHEET 2 OF 2 EXHIBIT 1A - GENERAL INFORMATION 1. Production Plans: Quantity production is planned. 2. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057, Part 80, and Part 90, Sec.90.210 3. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commission’s rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Parts 80 and 90. Maximum transmitter power shall not be adjustable by the user. 4. Similar to “Currently Certified Transmitter Type”: AZ489FT3794 – Motorola GP338 Professional Two-Way VHF Portable Radio

MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 9 SHEET 1 OF 2 REAR VIEW WITH CIRCUIT BOARD REMOVED FROM HOUSING (MATING SURFACES OF BOARD AND HOUSING ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3080 EXHIBIT 9 SHEET 2 OF 2 REAR VIEW WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN)

MOTOROLA INC. FCC ID: ABZ99FT3080 EXHIBIT 11A SHEET 1 OF 1 RF EXPOSURE INFORMATION Pursuant 47 CFR 2.1093 In accordance with 47 CFR 2.1093(c) this transmitter has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1093(d) for portable devices, using measurements per methods stated in 47 CFR 2.1093(d)(3). The complete S.A.R. EME Compliance Test Report is attached as Exhibit 11B.

Certificate Number: 1449-02 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Attention: Federal Communication Commission Date of Report: February 27, 2002 Report Revision: Rev. O Device Manufacturer: Motorola Device Description: HT1250LS 5W Portable 217-222 MHz FCC ID: ABZ99FT3080 Device Model: PMUD1761A Test Period: 2/01/02 – 2/13/02 Test Engineer: Kim Uong Lead SAR Test Engineer Author: Michael Sailsman EME Regulatory Affairs Liaison Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. ____________________________________________________________ _________________________ Ken Enger Date Approved Senior Resource Manager, Product Safety and EME Director Form-SAR-Rpt-B9 Page 1 of 61 TABLE OF CONTENTS 1.0 Introduction 2.0 Reference Standards and Guidelines 3.0 Description of Test Sample 3.1 Test Signal 3.2 Test Output Power 4.0 Description of Test Equipment 4.1 Description of SAR Measurement System 4.2 Description of Phantom 4.2.1 Body Phantom 4.3 Simulated Tissue Properties 4.3.1 Type of Simulated Tissue 4.3.2 Simulated Tissue Composition 4.4 Test condition 5.0 Description of Test Procedure 5.1 Description of Test Positions 5.2 Probe Scan Procedures 6.0 Measurement Uncertainty 7.0 SAR Test Results 8.0 Conclusion Form-SAR-Rpt-B9 Page 2 of 61 TABLE OF CONTENTS (Cont.) Appendix A: Data Results Appendix B: Dipole System Performance Check Results Appendix C: Calibration Certificates Appendix D: Illustration of Body-worn Accessories REVISION HISTORY Date Revision Comments 2/27/02 O Initial release Form-SAR-Rpt-B9 Page 3 of 61 1.0 Introduction This report details the utilization, test setup, test equipment, and test results of the Specific Absorption Rate (S.A.R.) measurements performed at the CGISS EME Test Lab for the HT1250LS, model PMUD1761A, FCC ID ABZ99FT3080. The applicable exposure environment is Occupational/Controlled. The test results included herein represent the highest SAR levels applicable to this product and clearly demonstrate compliance with FCC Occupational/Controlled RF Exposure limits of 8.0 mW/g per the requirements of 47 CFR 2.1093(d). 2.0 Reference Standards and Guidelines This product is designed to comply with the following national and international standards and guidelines. • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Terminal frequency…

Text truncated - open the document above for the full version.