ABZ99FT3083MOTOTRBO VHF 25 W Mobile Radio

XPR 4500 / XPR 4550 Mobile Radio User’s Guide 6816817H01 MOTOROLA, the Stylized Logo and CommPort are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. All Rights Reserved. ii XPR 4500 / XPR 4550 Mobile Radioi Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C99) to ensure compliance with RF energy exposure limits. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. MOTOROLA and the Stylized M Logo are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. !
 iv Notations Used in This Manual Throughout the text in this publication, you will notice the use of WARNINGS, CAUTIONS, and Notes. These notations are used to emphasize that safety hazards exist, and care that must be taken or observed. The following special notations identify certain items: WARNING: An operational procedure, practice, or other condition, which might result in injury or death if not carefully observed. CAUTION: An operational procedure, practice, or other condition, which might result in damage to the equipment if not carefully observed. Note:Note: An operational procedure, practice, or other condition, which is essential to emphasize. ExampleDescription Light button or > Buttons and keys are shown in bold print or as a key symbol. PHONE Menu items (softkeys) are similar to the way they appear on the radio’s display. WARNING ! CAUTION ! Contents Declaration of Conformity .................................................................. ii Computer Software Copyrights .........................................................iii Documentation Copyrights ................................................................iii Disclaimer .........................................................................................iii Notations Used in This Manual ........................................................ iv Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using Your Radio: The Basics .......................................................... 1 Getting Started .................................................................................. 2 Identifying Your Radio ....................................................................... 3 Control Head .............................................................................. 3 Operating Your Control Head ............................................................ 3 Turning On the Radio ........................................................................ 4 Setting the Volume ..................................................................... 5 Adjusting the Display Brightness ................................................ 5 Using the navigation key ............................................................ 5 Trunked Modes or Conventional Channels ................................ 6 Field Programming ..................................................................... 6 Display Status ................................................................................... 7 Feature Control ................................................................................. 7 Alert Tones ........................................................................................ 7 Basic Operating Procedures . . . . . . . . . . . . . . . . . . . 11 Basic Functions ............................................................................... 11 Selecting the Zone or Mode ............................................................ 12 Selecting or Changing the Zone ..........................................…

Text truncated - open the document above for the full version.

i zTitle Page XPR 4300/4350/4500/4550 Mobile Radio Installation Manual Motorola, Inc. 8000 West Sunrise Boulevard Fort Lauderdale, Florida 33322 6816812H01 ii Foreword This manual covers the XPR 4300/4350/4500/4550 digital mobile radios. It includes all the information necessary to maintain peak product performance and maximum working time, using levels 1 and 2 maintenance procedures. This level of service goes down to the board replacement level and is typical of some local service centers, self-maintained customers, and distributors. For details on radio operation or component-level troubleshooting, refer to the applicable manuals available separately. A list of related publications is provided in the section “Related Publications,” on page vi. Product Safety and RF Exposure Compliance See “Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards,” on page iii. Manual Revisions Changes which occur after this manual is printed are described in FMRs (Florida Manual Revisions). These FMRs provide complete replacement pages for all added, changed, and deleted items. To obtain FMRs, go to https://businessonline.motorola.com. Parts Ordering See Appendix A: Replacement Parts Ordering for information on how to obtain replacement parts. For part numbers, refer to the XPR 4300/4350/4500/4550 Digital Mobile Radio Basic Service Manual (Motorola publication part number 6816816H01). Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Trademarks MOTOROLA, the Stylized M logo, FLASHport are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. iii Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards ATTENTION! This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. To ensure compliance to RF Energy Safety Standards: •Install only Motorola approved antennas and accessories •Be sure that antenna installation is per “Antenna Installation,” on page 2-8 of this manual •Be sure that Product Safety and RF Safety Booklet enclosed with this radio is available to the end user upon completion of the installation of this radio Before using this product, the operator must be familiar with the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with each radio (Motorola Publication part number 68P81095C99) to ensure compliance with Radio Frequency (RF) energy exposure limits. For a list of Motorola-approved antennas and other accessories, visit the following web site which lists approved accessories for your radio model: http://www.motorola.com/governmentandenterprise . This Page Intentionally Left Blank iv Table of Contentsv 6816812H01March 23, 2006 Table of Contents Foreword .........................................................................................................ii Product Safety and RF Exposure Compliance ............................................................................................ii Manual Revisions ........................................................................................................................................ii Parts Ordering .............................................................................................................................................ii Computer Software Copyrights ...................................................................................................................ii Document Copyrights ..................................................................................................................................ii Disclaimer....................................................................................................................................................ii Trademarks ................................................................................................................…

Text truncated - open the document above for the full version.

MOTOROLA INC FCC ID: ABZ99FT3083 CERTIFICATION OF DATA Pursuant to 47 CFR 2.1517 (g) The technical data supplied with this application, having been taken under my supervision, is hereby duly certified. The following is a statement of my qualifications: 1) I have received a BSc EE degree from the Bradley University, Peoria, Illinois, USA 2) I have 7 years experience in developing, testing, and certifying Land Mobile Communications Products. NAME: Jalmi Shafary B. Abdul Jalil SIGNATURE: /s/ Jalmi Shafary B. Abdul Jalil DATE: August 6, 2007 POSITION: Engineering Section Manager I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Kok Gee Siong SIGNATURE: /s/ Kok Gee Siong DATE: August 6, 2007 POSITION: Senior Engineering Manager EXHIBIT 2 SHEET 1 OF 1

FCC ID: ABZ99FT3083 Date: August 29, 2007 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3083; VHF Mobile (136 – 174 MHz), 1 – 30 Watts Variable Power Dear Sir or Madam: Motorola Inc., 1313 East Algonquin Road, Schaumburg, Illinois, herein submits application for Certification of equipment identified by FCC ID number ABZ99FT3083. This transmitter is primarily intended for use in a mobile radio application with capabilities for conventional and 2 to 1 TDMA digital communications with a conducted transmit power which is adjustable from 1 Watt to 25 Watts nominal, 30 Watts Maximum. Please note that this radio will also be sold to NTIA customers. There are two models using the same transmitter – one with a GPS receiver and one without. The subject transmitter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible extern controls of the unit. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, /s/Donna Tokarz(signed) Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13A SHEET 1 OF 1

FCC ID: ABZ99FT3083 Date: Augst 29, 2007 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: ABZ99FT3083; VHF Mobile (136 – 174 MHz) Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos) and Exhibit 9, (Internal Photos) as Temporary or Short-Term Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibit 3 (External Photos) & 9 (Internal Photos) as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/Donna Tokarz(signed) Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13A SHEET 1 OF 1

FCC ID: ABZ99FT3083 18 th September, 2007 Ms. Linda Elliot Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Re: Form 731 Confirmation Number: EA320255 with FCC ID: ABZ99FT3083 and Correspondence Number: 33805. Dear Ms. Elliot; Motorola Inc., 1313 E. Algonquin Rd, Schaumburg, IL, herein submits its response to the 18 th September 2007 request for information in Correspondence Number 33805. Q1) Submit a sketch or photograph showing where the identification label will be placed on the device, pursuant to Section 2.1033(b)(7) of the FCC Rules. R1) Exhibit 1A has been uploaded via the Electronic Filing. This exhibit contains a photograph showing the identification label and its location on the device. Please contact me if you require any additional information. Sincerely, /s/ Larry D. Larsen (signed) Eng. Section Manager Email: [email protected]

FCC ID: ABZ99FT3083 22th October, 2007 Mr. Stanley Lyles Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Re: Form 731 Confirmation Number: EA320255 with FCC ID: ABZ99FT3083 and Correspondence Number: 34011. Dear Mr. Lyles; Motorola Inc., 1313 E. Algonquin Rd, Schaumburg, IL, herein submits its response to the 22 th October 2007 request for information in Correspondence Number 34011. Q1) This filing has requested Form-731 line-entry including frequencies at which part 90 operations are not licensable, in which case FCC requests applicants to address items per KDB pub. 634817. R1) Exhibit 13D has been uploaded via the Electronic Filing. Q2) Please submit external photos. R2) Exhibit 03 (External Photos) has been uploaded via the Electronic Filing. Please contact me if you require any additional information. Sincerely, /s/ Larry D. Larsen (signed) Eng. Section Manager Email: [email protected]

FCC ID: ABZ99FT3083 Date: Oct. 22, 2007 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Extended Frequencies for Transmitter with FCC ID: ABZ99FT3083 Dear Sir or Madam: Motorola Inc., 1313 East Algonquin Road, Schaumburg, Illinois, herein requests grant for extended frequencies within the range of FCC Rule Part 90 for the 25 Watt VHF transceiver identified by FCC ID:ABZ99FT3083. The transceiver is designed to operate in the 136 to 174 MHz band and we request the grant for contigious range of 136-174 MHz. This repeater will also be marketed to elements of the US Federal government (NTIA), exported to Canada and other international markets. For the United States market, the radios will be programed on authorized frequencies that are licensed by the FCC. This repeaterter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible external controls of the unit. The transmitter programming is the responsibility of authorized dealers and service agents. Please contact me if I can be of assistance. Sincerely, /s/Larry D. Larsen(signed) Larry D. Larsen Engr. Section Mgr. Tel: (847)-538-2239 Fax: (847)-538-4312 E-mail: [email protected]

MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 1 OF 5 GENERAL VIEW, 256 CHANNEL MODEL WITH MICROPHONE (CLOSE-UP OF RF EXPOSURE LABEL ON FOLLOWING PAGE) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 2 OF 5 RF EXPOSURE LABEL (CLOSE-UP VIEW) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 3 OF 5 FRONT VIEW, 256 CHANNEL MODEL FRONT VIEW, 32 CHANNEL MODEL MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 4 OF 5 BOTTOM VIEW, SHOWING FCC ID LABEL (CLOSE-UP OF FCC ID LABEL ON FOLLOWING PAGE) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 5 OF 5 CLOSE-UP VIEW OF FCC ID LABEL

MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 1 SHEET 1 OF 2 LIST OF EXHIBITS DESCRIPTION EXHIBIT REFERENCE I. Identification Label Information 1 2.1033-(c) 11 & General Information 1A 1. Production Plans 2.1033-(c) 2. Application References 2.1061 3. Data Submittal Procedure II. Certification of Data 2 2.1517-(g) III. External Photographs 3 2.1033-(c) 12 IV. Circuit Descriptions 4 V. Schematic Diagrams 5 2.1033-(c) 10 VI. Test Report 1. Data Index 6 2. RF Output Data 6A 2.1046 3. Modulation Characteristics A. Audio Response & Low Pass Filter Response 6B, 6C 2.1047-(a) B. Modulation Limiting 6D 2.1047-(b) 4. Occupied Bandwidth 6E 2.1049 5. Conducted Spurious Emissions 6F 2.1051 6. Radiated Spurious Emissions 6G 2.1053 7. Frequency Stability A. Frequency Stability vs. Temperature 6H-1 2.1055 B. Frequency Stability vs. Supply Voltage 6H-2 2.1055 8. Transient Frequency Behavior 6I 90.214 VII. Test Set-up Procedures 7 2.1041 VIII. Instruction Manuals 8 2.1033-(c) 3 IX. Internal Photographs 9 2.1033-(c) 11, 12 X. Parts List and Tune-up Procedures 10 2.1033-(c) 9, 10 XI. RF Exposure Information 11 2.1091 XII. Operational Description 12 2.1033-(c) 4, 5 1. Technical Characteristics 2. Application XIII. Cover Letter 13 MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 1 SHEET 2 OF 2 IDENTIFICATION LABEL Pursuant to 47 CFR 2.1033(c) LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. TYPE The label is a paper polyester film laminated with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 1A SHEET 1 OF 1 EXHIBIT 1A – GENERAL INFORMATION 1. Production Plans – Pursuant 2.1033 (c) Quantity production is planned. 2. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057, and Part 90 Sec. 90.210. 3. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commissions’ rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Part 90. Maximum transmitter power shall not be adjustable by the user.

MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 1A SHEET 1 OF 2 FCC BOTTOM VIEW, SHOWING FCC ID LABEL (CLOSE-UP OF FCC ID LABEL ON FOLLOWING PAGE) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 1A SHEET 2 OF 2 CLOSE-UP VIEW OF FCC ID LABEL

MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 1 OF 4 TOP VIEW OF GPS MODEL WITH CHASSIS TOP COVER REMOVED (MATING SURFACES OF TOP COVER AND CIRCUIT BOARD IN CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 2 OF 4 TOP VIEW OF NON-GPS MODEL WITH CHASSIS TOP COVER REMOVED (MATING SURFACES OF TOP COVER AND CIRCUIT BOARD IN CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 3 OF 4 TOP VIEW OF GPS MODEL WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT3083 EXHIBIT 3 SHEET 4 OF 4 TOP VIEW OF NON-GPS MODEL WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN)

MOTOROLA INC. FCC ID: ABZ99FT3083 RF EXPOSURE INFORMATION Pursuant 47 CFR 2.1091 In accordance with 47 CFR 2.1091(c) this transmitter has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1091(d) for mobile devices, using measurements per methods stated in 47 CFR 2.1091(d)(1). The complete S.A.R. EME Compliance Test Report is attached as Exhibit 11B. EXHIBIT 11A SHEET 1 OF 1

FCC ID: ABZ99FT3083 SR5135 Form-MPE Vehicle rpt. Rev 3.00 Page 1 of 61 TESTING CERT #2518.01 FCC ID: ABZ99FT3083 DECLARATION OF COMPLIANCE MPE ASSESSMENT Networks & Enterprise EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 8/15/07 Report Revision: Rev. O Report ID: MPE rpt_XPR4550_VHF _ Rev O_070815_SR5135 Responsible Engineer: Kim Uong (Principle Staff EME Eng.) Date/s Tested: 7/19/07 – 8/13/07 Manufacturer/Location: Motorola, Penang Date submitted for test: 7/5/07 DUT Description: XPR4550 VHF 25W MINI-U GPS Test TX mode(s): CW Max. Power output: 30W, 50% Duty Cycle (PTT) TX Frequency Bands: 136-174 MHz Signaling type: FM Model(s) Tested: PMUD2039A Model(s) Certified: PMUD2039A Serial Number(s): 038THL0202 Classification: Occupational Controlled (Operator); General Population/Uncontrolled (Passengers/Bystanders) Rule Part(s): 2.1091 (d) Approved Accessories: Antenna(s): HAD4006A (136-144MHz 1/4 Wave 0dBd, Mini-U connector) HAD4007A (146-150.8MHz 1/4 Wave 0dBd, Mini-U connector) HAD4008A (150.8-162MHz 1/4 Wave 0dBd, Mini-U connector) HAD4009A (162-174MHz 1/4 Wave 0dBd, Mini-U connector) HAD4014A (146-172MHz 5/8 Wave 3.0dBd, Mini-U connector) RAD4198A (136-144MHz 1/4 Wave 0dBd, BNC connector) RAD4199A (146-150.8MHz 1/4 Wave 0dBd, BNC connector) RAD4200A (150.8-162MHz 1/4 Wave 0dBd, BNC connector) RAD4201A (162-174MHz 1/4 Wave 0dBd, BNC connector) RAD4214A (Combo GPS/VHF - 136-144MHz 1/4 Wave 0dBd , Mini-U connector) RAD4215A (Combo GPS/VHF - 146-150.8MHz 1/4 Wave 0dBd, Mini-U connector) RAD4216A (Combo GPS/VHF - 150.8-162MHz 1/4 Wave 0dBd, Mini-U connector) RAD4217A (Combo GPS/VHF - 162-174MHz 1/4 Wave 0dBd, Mini-U connector) RAD4218A (Combo GPS/VHF - 146-172MHz 5/8 Wave 3.0dBd, Mini-U connector) RAD4219A (Combo GPS/VHF - 136-144MHz 1/4 Wave 0dBd, BNC connector) RAD4220A (Combo GPS/VHF - 146-150.8MHz 1/4 Wave 0dBd, BNC connector) RAD4221A (Combo GPS/VHF - 150.8-162MHz 1/4 Wave 0dBd, BNC connector) RAD4222A (Combo GPS/VHF - 162-174MHz 1/4 Wave 0dBd, BNC connector) Final RF Exposure Results: Mobile max calculated 1-g Avg. SAR: 0.16 mW/g Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 3.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. Signature on file – Deanna Zakharia Deanna Zakharia – N&E EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 8/15/2007 Certification Date: 8/15/2007 Certification No.: L1070806P FCC ID: ABZ99FT3083 SR5135 Form-MPE Vehicle rpt. Rev 3.00 Page 2 of 61 TABLE OF CONTENTS 1.0 Product and System Description 2.0 Additional Options and Accessories 3.0 Measurement and Limit Standards 4.0 Data Collection Consideration 5.0 Measurement System Uncertainty Levels 6.0 Method of Measurement 6.1 EME measurements made with trunk mounted antenna(s) 6.1.1 External vehicle EME measurement 6.1.2 Internal vehicle EME measurement 6.2 EME measurements made with roof mounted antenna 6.2.1 External vehicle EME measurements 6.2.2 Internal vehicle EME measurement 7.0 Test Site 8.0 Measurement System/Equipment 9.0 Test Unit Description 10.0 Test Set-Up Description 11.0 Test Results Summary 12.0 Conclusion APPENDIX A: Illustration of Antenna Location and Test Distances APPENDIX B: Meter/Probe Calibration Certificates APPENDIX C: Photos of Assessed Antennas APPENDIX D: Detailed MPE Measurement Data APPENDIX E: SAR Simulation Results REVISION HISTORY Date Revision Comments 8/15/07 O Initial release FCC ID: ABZ99FT3083 SR5135 Form-MPE Vehicle rpt. Rev 3.00 Page 3 of 61 1.0 Product and System Description FCC ID: ABZ99FT3083, model PMUD2039A is a mobile transceiver that utilizes both analog and digital two-way radio communications and also includes GPS capability. The modulation scheme used for analog is narrowband Frequency Modulation (FM). The modulation scheme used for digital is 4 Level Frequency Shift Keying (4FSK) and Time Division Multiple Access (TDMA). TDMA is used to allocate portions of the RF signal by dividing time into two slots. Transmission from a unit or base station is accommodated in time-slot lengths of 30 milliseconds and frame lengths of 60 milliseconds. The intended use of the radio is Push-To-Talk (PTT) while the device is properly installed in a vehicle with an external antenna mounted at the center of the roof or trunk. This device will be marketed to and used by employees solely for work-related operations, such as public safety agencies, e.g. police, fire and emergency medical. User training is the responsibility of these agencies which can be expected to employ the usage instructions, safety information and operational cautions set forth in the user's manual, instructional sessions or other means. Accordingly this product is classified as Occupational/Controlled Exposure. However, In accordance with FCC requirements, the passengers inside the vehicle and the bystanders external to the vehicle are evaluated to the General Population/Uncontrolled Exposure Limits. (Note that “By-standers” as used herein mean people other than operator) 2.0 Additional Options and Accessories: All antennas are listed on front cover page. Note 1: Antennas have optional mini-U and BNC radio termination connectors and therefore only mini-U was tested. 3.0 Measurement and Limit Standards Measurements were performed according to the recommended guidelines in IEEE/ANSI C95.3- 2002 and compared to FCC Limits Per 47 CFR 2.1091 (d) for General Population/Uncontrolled RF Exposure. For test frequencies ranging from 136-174MHz the MPE (Maximum Permissible Exposure) limit to electromagnetic energy in equivalent plane wave free-space power density is 0.20mW/cm 2 . FCC ID: ABZ99FT3083 SR5135 Form-MPE Vehicle rpt. Rev 3.00 Page 4…

Text truncated - open the document above for the full version.

MOTOROLA INC. FCC ID: ABZ99FT3083 EXHIBIT 6 SHEET 1 OF 2 INDEX OF SUBMITTED MEASURED DATA This exhibit contains the measured data for this equipment as follows: EXHIBIT 6A - RF Power Output (Table) EXHIBIT 6B - Transmit Audio Response (2 Graphs) 6B-1 – 12.5 kHz Channel Spacing 6B-2 – 25 kHz Channel Spacing EXHIBIT 6C - Transmit Audio Post Limiter Lowpass Filter Response (Graph) EXHIBIT 6D - Modulation Limiting Characteristics (6 Graphs) 6D-1 – 12.5 kHz Carrier Squelch Mode 6D-2 – 12.5 kHz Tone Private Line (CTCSS) Mode 6D-3 – 12.5 kHz Digital Private Line (CDCSS) Mode 6D-4 – 25 kHz Carrier Squelch Mode 6D-5 – 25 kHz Tone Private Line (CTCSS) Mode 6D-6 – 25 kHz Digital Private Line (CDCSS)…

Text truncated - open the document above for the full version.