ABZ99FT30922-Way Portable Radio

1 English RF Energy Exposure and Product Safety for Portable Two-Way Radios RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE:This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high BEFORE USING THIS RADIO, READ THIS GUIDE WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL FOR COMPLIANCE WITH APPLICABLE STANDARDS AND REGULATIONS. ATT ENT ION! MainContent_EN.fm Page 1 Monday, March 25, 2013 12:16 PM 2 English levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html www.who.int/en/ www.motorolasolutions.com/rfhealth MainContent_EN.fm Page 2 Monday, March 25, 2013 12:16 PM 3 English Federal Communication Commission (FCC) Regulations When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/ controlled RF exposure environments at operating duty factors of up to 50% talk-50% listen and is approved for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. NOTE:The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. MainContent_EN.fm Page 3 Monday, March 25, 2013 12:16 PM 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. • FCC, OET Bulletin 65 • Institute of Electrical and Electronic Engineers (IEEE) C95.1 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) • Ministry of Health (Canada) Safety Code 6 • Industry Canada RSS-102 • Australian Communications Authority Radiocommunications Standard et seq. • ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. • DO NOT remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. MainContent_EN.fm Page 4 Monday, March 25, 2013 12:16 PM 5 English Operating Instructions • Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To- Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). • Private Talk Position (XTS 4000 Only). When placing or receiving a personal message, hold your radio as you would a wireline/wireless telephone. Speak directly into the microphone. Use the PTT as in a normal two-way operation. • Two-Way Radio Operation. In front of the face, hold the radio in a vertical position with the microphone (and other parts of the radio including the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio at a proper distance is important to ensure compliance. NOTE:RF exposures decrease with increasing distance from the antenna. • Body Worn Operation. When worn on the b…

Text truncated - open the document above for the full version.

PROFESSIONAL DIGITAL TWO-WAY RADIOSMOTOTRBO TM CP200d TM NON-DISPLAYPORTABLEUSER GUIDE FrontCover_HalfLetter_template.fm Pa ge 1 Friday, May 17, 2013 2:52 PM NAG-LACR.book Page ii Thursday, March 28, 2013 10:32 AM Declaration of Conformity English i Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola Solutions, Inc.Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.Phone Number: 1-800-927-2744Hereby declares that the product: Model Name: CP200d conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital DeviceAs a personal computer peripheral, this dev ice complies with Part 15 of the FCC Ru les. This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NAG-LACR.book Page i Thursday, March 28, 2013 10:32 AM Declaration of Conformity English ii Note: This equipment has been tested and found to comply with the li mits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provi de reasonable protection against harmful interference in a residential installation. This equipment generates, us es and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wi ll not occur in a particular installation. If this equipment does cause harmful interference to radi o or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected. • Consult the dealer or an experienc ed radio/TV technician for help. NAG-LACR.book Page ii Thursday, March 28, 2013 10:32 AM Contents English iii ContentsThis User Guide contains all the information you need to use the MOTOTRBO CP200d Portable Radio.Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . iImportant Safety Information . . . . . . . . . . . . . . . . . vi Product Safety and RF Exposure Compliance . . .vi Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . viComputer Software Copyrights . . . . . . . . . . . . . . . vii Handling Precautions . . . . . . . . . . . . . . . . . . . . . . viiiGetting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . 1What Your Dealer/System Administrator Can Tell You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Preparing Your Radio for Use . . . . . . . . . . . . . . . . . . 2 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 2 Attaching the Battery . . . . . . . . . . . . . . . . . . . . . . . . . 2Attaching the Antenna . . . . . . . . . . . . . . . . . . . . . . . . 3Attaching the Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . 3Powering Up the Radio . . . . . . . . . . . . . . . . . . . . . . . 4Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying Radio Controls . . . . . . . . . . . . . . . . . . . . 5 Radio Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Programmable Buttons . . . . . . . . . . . . . . . . . . . . . . . 7 Assignable Radio Functions . . . . . . . . . . . . . . . . . 7Assignable Settings or Utility Functions . . . . . . . . . 8 Push-To-Talk (PTT) Bu tton . . . . . . . . . . . . . . . . . . . . 8 Switching Between Conventional Analog and Digital Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Identifying Status Indicators . . . . . . . . . . . . . . . . . . 10 LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Receiving and Making Calls . . . . . . . . . . . . . . . . . . 12 Selecting a Channel . . . . . . . . . . . . . . . . . . . . . . . . 12Receiving and Responding to a Radio Call . . . . . . 13 The LED lights up solid green while the radio is transmitting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Receiving and Responding to a Group Call . . . . . 13Receiving and Responding to a Private Call . . . 14 Receiving an All Call . . . . . . . . . . . . . . . . . . . . . . 15 Making a Radio Call . . . . . . . . . . . . . . . . . . . . . . . . 15 Making a Group Call . . . . . . . . . . . . . . . . . . . . . 15Making a Private Call . . . . . . . . . . . . . . . . . . . . 16 Making a Selective Call . . . . . . . . . . . . . . . . . . . 17 NAG-LACR.book Page iii Thursday, March 28, 2013 10:32 AM Contents English iv Making an All Call . . . . . . . . . . . . . . . . . . . . . . 18 Talkaround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Monitoring Features . . . . . . . . . . . . . . . . . . . . . . . . 19 Monitoring a Channel . . . . . . . . . . . . . . . . . . . . . 19Permanent Monitor . . . . . . . . . . . . . . . . . . . . . . . 19 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . 20 Scan Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Starting and Stopping Scan . . . . . . . . . . . . . . . . 21Responding to a Transmission During a Scan …

Text truncated - open the document above for the full version.

Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 2 SHEET 1 OF 1 EXHIBIT 2 STATEMENT OF CERTIFICATION – Pursuant to 47 CRF 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: 1) I received an Electronic Majoring in Telecommunications Engineering degree from University Applied Science Konstanz, Germany. 2) I have 9 years experience in developing, testing, and certifying Land Mobile Communications Products. NAME: Khairil Anuar Khairi SIGNATURE: _______ DATE: April 1, 2013 POSITION: Senior Electrical Engineer 3) I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Samsun Zaini SIGNATURE: DATE: April 1, 2013 POSITION: Engineering Section Manager

FCC ID: ABZ99FT3092 EXHIBITS 13A ______________________________________________________________________________ Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. May 10 th , 2013 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT3092 MOTOTRBO VHF Range (136 – 174 MHz), 1–5 Watts Rated variable power, Max Power 6 Watts Dear Sir/Madam, Motorola Solutions Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits application for Certification of the subject transmitter. This transmitter is primarily intended for use in a portable radio application with capabilities for conventional communications with a conducted transmit power which is adjustable from 1.0 Watts (+30dBm) to 5.0 Watts (+36.98dBm). We are requesting Certification under Part 22, 90.210 and 90.210(e) of the Commission’s Rules to allow operation of this equipment in 136-174 MHz. The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at (954) 723-5793. Sincerely, Mike Ramnath Manager, Regulatory Compliance Email: [email protected]

Date: May 13, 2013 Certification Department ACS Engineering, Inc Subject: Letter of Authorization for FCC and IC filings This letter is to authorize Mike Ramnath to sign application forms and associated documentation on my behalf for the following FCC and Industry Canada Filings: FCC IC ABZ99FT3092 109AB ‐99FT3092 Please contact me if there are any questions or issues. Sincerely, Ken Weiss Senior Staff Engineer Tel: (847)‐576‐2789 Fax: (847)‐538‐3905 E‐mail: [email protected]

FCC ID: ABZ99FT3092 EXHIBITS 13C Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. May 10 th , 2013 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification. Dear Sir/Madam: The CP200d Portable 2-Way radio was designed to operate in the frequency bands 136-174 MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola is requesting that the FCC lists the frequencies 136-174 MHz under FCC Rule Parts 90 on the FCC Grant. For the FCC’s Rule Parts 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) Part 22 Part 90 Federal Emission Designator Rule 136- 150.8 x 11K0F3E, 16K0F3E**, 7K60FXD, 7K60FXE, 7K60F1D, 7K60F1E, 7K60F1W 157.77-158.64 x 157.83-158.07 x 150.8-161.6250 x 161.6250-161.7750* 161.7750-173.4 x x 173.4-174 x * Canada ** For Canada and Part 22 Sincerely, Mike Ramnath Manager, Regulatory Compliance Email: [email protected]

Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 1 OF 7 EXHIBIT 3 EXTERNAL PHOTOGRAPHS - Pursuant to 47 CFR 2.1033(c) 12 The following photographs are attached. Exhibit 1. Back View with Battery 3A 2. Front View with Battery. 3B 3. Back View (FCC label location). 3C 4. Side view (Right). 3D 5. Side view (Left). 3E 6. Top view (Controls). 3F Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 2 OF 7 Back View with Battery Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 3 OF 7 Front view with Battery Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 4 OF 7 Back View with FCC label location Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 5 OF 7 Side View (Right) Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 6 OF 7 Side View (Left) Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 3 SHEET 7 OF 7 Top View (Controls)

Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 1 SHEET 1 OF 2 Identification Label LOCATION See the Attached Photograph or Sketch Top of Radio X Back of Radio Back of Radio under Belt Clip TYPE X The label is a polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with the minimum peel strength of 32 oz/inch. MARKINGS (TEXT) X See the Attached Photograph and Exhibit 3C for the actual location of the FCC label on the device. Label Attached Below. See Attached Drawing. FCC LABEL FOR NON KEYPAD MODEL (AAH01JDC9JC2AN, Analog only model) Applicant: Motorola Solutions Inc FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 1 SHEET 2 OF 2 FCC LABEL FOR NON KEYPAD MODEL (AAH01JDC9JA2AN, Analog & Digital model)

Applicant: Motorola Solutions Inc. FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 9 SHEET 1 OF 5 Internal Photographs The following photographs are attached. Exhibit 1. RF board with & without Shields (Top) 9A 2. RF board with & without Shields (Bottom) 9B 3. Chassis and housing (front side) 9C 4. Chassis and housing (back side) 9D Applicant: Motorola Solutions Inc. FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 9 SHEET 2 OF 5 Exhibits 9A RF board with and without Shields (Top) Applicant: Motorola Solutions Inc. FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 9 SHEET 3 OF 5 Exhibit 9B RF board with and without Shields (Bottom) Applicant: Motorola Solutions Inc. FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 9 SHEET 4 OF 5 Exhibit 9C PCB board with chassis and housing (Top) Applicant: Motorola Solutions Inc. FCC ID: ABZ99FT3092 / IC: 109AB-99FT3092 EXHIBIT 9 SHEET 5 OF 5 Exhibit 9D PCB board with chassis and housing (Bottom)

FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 Motorola Solutions EME Form-SAR-Rpt-Rev. 12.01 Page 1 of 65 TESTING CERT # 2518.01 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 2 Motorola Solutions Inc. EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 05/20/2013 Report Revision: A Report ID: SR11195_PMUD3231A Rev A 130520 Responsible Engineer: Veeramani Veerapan (Sr.EME Engineer) Report Author: Veeramani Veerapan (Sr.EME Engineer) Date/s Tested: 02/22/13-04/09/13 Manufacturer/Location: Motorola, Penang Sector/Group/Div.: EMS Date submitted for test: 02/01/13 DUT Description: 136-174 MHz, 5W, NKP Test TX mode(s): CW (PTT) Max. Power output: 6.0 W Nominal Power: 5.0 W Tx Frequency Bands: 136 – 174 MHz Signaling type: FM Model(s) Tested: PMUD3231A Model(s) Certified: PMUD3231A Serial Number(s): 752TPB0245, 752TPB0246 Classification: Occupational/Controlled FCC ID: ABZ99FT3092; Rule Part 90 (150.8-173.4 MHz) Results outside FCC bands are not applicable for FCC compliance demonstration. IC: 109AB-99FT3092; (138-144; 148-149.9 and 150.05-174 MHz) * Refer to section 15 of part 1 for highest SAR summary results. The test results clearly demonstrate compliance with FCC Occupational/Controlled RF Exposure limits of 8 W/kg averaged over 1 gram per the requirements of 47 CFR 2.1093(d). The 10 grams result is not applicable to FCC filing. Results outside FCC bands are not applicable for FCC compliance demonstration. The test results clearly demonstrate compliance with ICNIRP (1998) Guidelines for limiting exposure in time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz), Health Physics 74, 494-522 RF Exposure limits of 10 W/kg averaged over 10grams of contiguous tissue. Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 3.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola Solutions Inc EME Laboratory. I attest to the accuracy of the data and assume full responsibility for the completeness of these measurements. This reporting format is consistent with the suggested guidelines of the TIA TSB-150 December 2004. The results and statements contained in this report pertain only to the device(s) evaluated. Deanna Zakharia EMS EME Lab Senior Resource Manager, Laboratory Director Approval Date: 5/22/2013 Certification Date: 5/22/2013 Certification No.: L1130523P FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 Motorola Solutions EME Form-SAR-Rpt-Rev. 12.01 Page 2 of 65 Part 1 of 2 1.0 Introduction ................................................................................................................................. 4 2.0 Abbreviations / Definitions ......................................................................................................... 4 3.0 Referenced Standards and Guidelines ........................................................................................ 4 4.0 SAR Limits ................................................................................................................................. 5 5.0 SAR Result Scaling Methodology .............................................................................................. 6 6.0 Description of Device Under Test (DUT) .................................................................................. 6 7.0 Optional Accessories and Test Criteria....................................................................................... 6 7.1 Antennas ......................................................................................................................... 7 7.2 Batteries .......................................................................................................................... 7 7.3 Body worn Accessories ................................................................................................... 7 7.4 Audio Accessories .......................................................................................................... 8 8.0 Description of Test System ......................................................................................................... 9 8.1 Descriptions of Robotics/Probes/Readout Electronics ................................................. 10 8.2 Description of Phantom(s) ............................................................................................ 10 8.3 Description of Simulated Tissue ................................................................................... 10 9.0 Additional Test Equipment ....................................................................................................... 11 10.0 SAR Measurement System Verification ................................................................................... 12 10.1 Equivalent Tissue Test Results ..................................................................................... 12 10.2 System Check Test Results ........................................................................................... 13 11.0 Environmental Test Conditions ................................................................................................ 14 12.0 DUT Test Methodology ............................................................................................................ 14 12.1 Measurements ............................................................................................................... 14 12.2 DUT Configuration(s) ................................................................................................... 15 12.3 DUT Positioning Procedures ........................................................................................ 15 12.3.1 Body ................................................…

Text truncated - open the document above for the full version.

FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 1 of 42 TESTING CERT # 2518.01 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 2 of 2 Motorola Solutions Inc. EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 05/20/2013 Report Revision: A Report ID: SR11195_PMUD3231A Rev A 130520 Responsible Engineer: Veeramani Veerapan (Sr.EME Engineer) Report Author: Veeramani Veerapan (Sr.EME Engineer) Date/s Tested: 02/22/13-04/09/13 Manufacturer/Location: Motorola, Penang Sector/Group/Div.: EMS Date submitted for test: 02/01/13 DUT Description: 136-174 MHz, 5W, NKP Test TX mode(s): CW (PTT) Max. Power output: 6.0 W Nominal Power: 5.0 W Tx Frequency Bands: 136 – 174 MHz Signaling type: FM Model(s) Tested: PMUD3231A Model(s) Certified: PMUD3231A Serial Number(s): 752TPB0245, 752TPB0246 Classification: Occupational/Controlled FCC ID: ABZ99FT3092; Rule Part 90 (150.8-173.4 MHz) Results outside FCC bands are not applicable for FCC compliance demonstration. IC: 109AB-99FT3092; (138-144; 148-149.9 and 150.05-174 MHz) * Refer to section 15 of part 1 for highest SAR summary results. The test results clearly demonstrate compliance with FCC Occupational/Controlled RF Exposure limits of 8 W/kg averaged over 1 gram per the requirements of 47 CFR 2.1093(d). The 10 grams result is not applicable to FCC filing. Results outside FCC bands are not applicable for FCC compliance demonstration. The test results clearly demonstrate compliance with ICNIRP (1998) Guidelines for limiting exposure in time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz), Health Physics 74, 494-522 RF Exposure limits of 10 W/kg averaged over 10grams of contiguous tissue. Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 3.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola Solutions Inc EME Laboratory. I attest to the accuracy of the data and assume full responsibility for the completeness of these measurements. This reporting format is consistent with the suggested guidelines of the TIA TSB-150 December 2004. The results and statements contained in this report pertain only to the device(s) evaluated. Deanna Zakharia EMS EME Lab Senior Resource Manager, Laboratory Director Approval Date: 5/22/2013 Certification Date: 5/22/2013 Certification No.: L1130523P FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 2 of 42 APPENDIX D Test System Check Scans FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 3 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 4 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 5 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 6 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 7 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 8 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 9 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 10 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 11 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 12 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 13 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 14 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 15 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 16 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 17 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 18 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 19 of 42 FCC ID: ABZ99FT3092/ IC: 109AB-99FT3092 SR 11195 EMS EME Form-SAR-Rpt-Rev. 12.01 Page 20 of 42 APPENDIX E DUT Scans (Shortened Scan and Highe…

Text truncated - open the document above for the full version.